Hi all, I broke the screen and I need to buy a spare part: did you know where can I find an atmel screen? I want atmel 'cause it seems the only screen where dt2w work. Can someone help me?
If no one know, can someone plase tell me where to buy a good screen? Cheap ones seems to have a lot of problem (only 2 fingers supported, bad navigation button light, smaller or larger than original screen...)
Related
Hi all,
my tg01 has a large rainbow patch on the screen, and it is sometimes visable even when the back light is on,
i was wondering if replacing the screen would solve this problem?
and if this is the solution is this the right part i should order?
http://www.dhgate.com/touch-screen-...touch/p-ff80808127dc41170127f5e7eb076371.html
Sturgie said:
Hi all,
my tg01 has a large rainbow patch on the screen, and it is sometimes visable even when the back light is on,
i was wondering if replacing the screen would solve this problem?
and if this is the solution is this the right part i should order?
http://www.dhgate.com/touch-screen-...touch/p-ff80808127dc41170127f5e7eb076371.html
Click to expand...
Click to collapse
The part you have linked to is just the Digitiser (incidentaly not apparently identical to the TG01) - the resistive matrix pad which sits over the actual LCD and provides the 'touch' x-y grid information to the processor.
A rainbow patch suggests one of three things:
1. a point of pressure which is distorting the LCD screen under the digitiser
2. possibly a crack in the actual glass
3. inward distortion in the digitiser causing it to press against the LCD glass
I'd look closely first to see if you have anything eg. between the battery and the body which might be causing such pressure forwards; then check the digitiser to see if the surface appears bowed inwards and finally examine closely for any crack.
It may be that a new digitiser would solve; but if there is a crack in the LCD glass then I'm afraid only a replacement screen will solve.
Good luck !
Thanks for your help
i will look into it more
but i think its because of the screen being exposed to a point of pressure because lately i have been keeping it in my trouser pocket along side my ipod which i think has created the rainbow patch
I found something like this.
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchpad_Cover_Touchscreen/360240918756/item
maybe it helps
alternative solution
If someone in Italy have broken his TG01 and want to sell, i'm online, my tg 01 need a new mainboard....
Thanks
Alessandro
why not try
Finally, you buy it?
stay away!
I think we can try
I think we can try
I feel good
I feel good,But still have to see your own ideas
Identified this problem?
Identified this problem?
I will ask a very stupid question... can I put some other device touch screen or like to put REGZA the tg03 capacitive screen? u dont need drivers for that just that screen fits?
nikola92 said:
I will ask a very stupid question... can I put some other device touch screen or like to put REGZA the tg03 capacitive screen? u dont need drivers for that just that screen fits?
Click to expand...
Click to collapse
Most unlikely that it would be practicable to transplant a capacitive screen. The resistive digitiser on the TG01 screen has a dedicated ribbon cable interfacing to the main board providing X-Y information; even if the capacitive substitute had a similar connector, the hardware on the main board will not be able to interpret the signal. And I am sure that there will be different drivers for the capacitive screen, even though performing the same function.
I would have to ask though why the desire to go capacitive ? The resistive screen (properly calibrated) gives virtualy the same responsiveness with the massive added bonus of being able to use a proper stylus when wanted, in particular for real handwriting recognition, which is impossible on a capacitive device.
just asking, I had and capacitive that was really bad so as resistive and I had the good capacitive and probably the best resistive screen here on tg01
jake333 said:
Finally, you buy it?
Click to expand...
Click to collapse
I have TG-01 with USB connection problem I want to replace its motherboard can any one please help where from I can buy a MB otherwise I would like to cell its parts. please contact at my e-mail. [email protected]com
Regards
Bought a second hand HTC Diamond that works real well. Just ordered an extended battery and a new back to cover the thickness of the new battery but the screen needs to go and be replaced.
Has a couple scratches (Isn't too bad) but there's one right near the forward facing camera that pisses me off because I always see it when I'm looking at the screen.
How hard would it be to replace the screen (By myself) and where would be the cheapest place to buy a new screen for it? I want a quality OEM (If possible) screen for it, not a cheap Chinese knock-off.
Check Ebay. There is a lot of lcd's and digitizers for Diamond.
Here is how to video: http://www.youtube.com/watch?v=9LrlBpgskwU
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
sokomind said:
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
Click to expand...
Click to collapse
Ooh ..... So you offer repair services !!!! If it is so nice
ok here is a link to new screen http://www.amazon.com/NEW-Touch-Screen-Diamond-P3700/dp/B0026UECGA/ref=sr_1_2?ie=UTF8&qid=1293737165&sr=8-2
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-diamond-p3700-p-948.html touch screen
My new screen of lg really works well.
Normally , a full display will cost you at about 40-50E. At least this are the prices here.
I too have a stupid display , it has some little white dots under it that light up when the lcd lights up. Not a big problem , but does annoy me
Hi all,
after a drop the glass of my 16GB OPO crashed. The touchscreen doesn't work anymore, if I touch at any point of the screen nothing happens. Btw, the LCD display still works as you can see from the pic.
So:
Broken glass;
broken touchscreen;
Working LCD panel.
What's the best and/or cheaper place to buy a quality glass+touchscreen?
Thanks in advance.
Hello dear community, my dreadiest fear just realized today :
my X2 decided to make one with the concrete...
luckily, both with my heart, only the touchscreen shattered from this unholy union.
So now I want to replace only the broken thing (less expensive) with a replacement part I found on aliexpress (25 € for those wandering), BUT I was unable to find any clue about the separation of the LCD and the touchscreen :
Are they inextricably bound together as the galaxy S series are ?
Or are they just attached with some tape as any good reparable phone should be ?
I was also wandering whether the screen parts were the same between the X1 and the X2 !
If you have any material showing how to proceed with the separation, and care to share them, I'd be in your dept forever !!
Boujou bien !
kwenteen said:
Hello dear community, my dreadiest fear just realized today :
my X2 decided to make one with the concrete...
luckily, both with my heart, only the touchscreen shattered from this unholy union.
So now I want to replace only the broken thing (less expensive) with a replacement part I found on aliexpress (25 € for those wandering), BUT I was unable to find any clue about the separation of the LCD and the touchscreen :
Are they inextricably bound together as the galaxy S series are ?
Or are they just attached with some tape as any good reparable phone should be ?
I was also wandering whether the screen parts were the same between the X1 and the X2 !
If you have any material showing how to proceed with the separation, and care to share them, I'd be in your dept forever !!
Boujou bien !
Click to expand...
Click to collapse
The disassembly should be the same as the X1 video here:
https://www.youtube.com/watch?v=8NOG1SISbKw
Yes I have seen this video, but it is only showing the removing of the screen/touchscreen from the phone, not the separation of the LCD from the touchscreen (they are both broken in the video, hence no point to mess with them !)
kwenteen said:
Yes I have seen this video, but it is only showing the removing of the screen/touchscreen from the phone, not the separation of the LCD from the touchscreen (they are both broken in the video, hence no point to mess with them !)
Click to expand...
Click to collapse
They are fused together so it's not even worth trying to remove them. 99.99% of the time you won't be successful.
Good to know !
I almost succeeded once, with a heated bench, But I'm not willing to try that again…
Did you have to fix yours already ? Any clue about backward compatibility with the X1 assembly (20 % cheaper !) ?
kwenteen said:
Good to know !
I almost succeeded once, with a heated bench, But I'm not willing to try that again…
Did you have to fix yours already ? Any clue about backward compatibility with the X1 assembly (20 % cheaper !) ?
Click to expand...
Click to collapse
I imagine they would be the same display assembly but I'm not 100 percent sure.
I Sat on my Huawei honor X2 -Screen is not working Properly
Hello (posted this in wrong area a few weeks ago)
I sat on my X2 GEM-703L under several pillows - bend was 1/2 inch - the top & bottom were 1/2 inch lower than center . I carefully bent it straight (there is a small kink in metal frame right side just above center button. Everything else seems to work beside the screen. *** I will push "4" and the key adjacent character is recognized, also it will type on its own or type 3-5 characters when I only pushed one...
Questions:. Does this sound like touch screen Replacement will fix these issues??? Or is thier additional interface hardware attached with the touch screen, or both?
- I really like that phone - hoping it is not a lost cause...
Thanks for your help
Gary
Gary2017 said:
Hello
Questions:. Does this sound like touch screen Replacement will fix these issues??? Or is thier additional interface hardware attached with the touch screen, or both?
- I really like that phone - hoping it is not a lost cause...
Click to expand...
Click to collapse
Hello Gary, sorry just saw your post.
I Think this might be fixed by a change of screen, but the problem might also come from the bent frame too.
For the tactile to work properly, and not register wrong input, the screen needs to be grounded and I think also calibrated to the phone caracteristics. If you just replace the screen, it's environment would not be the same as it is suppose to be anymore (frame with a kink) hence there is a risk that the new screen might reacts weirdly, registering ghost input etc... Because the screen might not rest flat on the support frame, and the contacts used for grounding might not be working anymore.
I have a spare screen that I*just bought for mine, unfortunately my problem seems to come from the motherboard, so the screen is useless for me.
If you want to give it a try, and live in the US, pm me !
If you don't want to do it (the screen comes without a frame, so you have to use your old one)
I'm willing to buy your phone to try to save mine ! :angel:
Best,
Quentin.
Hi, Hope i am right to ask here for help
I has Fallen on one edge. Glas got a Cracked (Right SIde).
The Display self Shows all, but touch only works on the Craked side, the Other side Touch isnt working anymore (Only Display , no Touch)
Is it only the display deffekt, or is there another part. Don't want to Order the wrong spare Part.
Since i don't know if the touch is handled in the Display or not i thought i ask here, maybe someone could help me
Hi, a little late
But for everyone else. You can get Display or only Touch at Aliexpress.
I get one in summer 2017 for 28,-€