SANDROID KERNEL for Samsung Galaxy Core 2
I am done modify source kernel for SM-G355H and I share with you, so read carefully and enjoy the kernel.
"More Features, More Experience"
Take a note : THIS KERNEL WORK ON ALL ROM SO DON'T ASK AGAIN. AND READ TEXT BY TEXT IN THIS POST.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
FEATURES :
FOR MORE INFORMATIONS ABOUT FEATURES GO HERE
Compiled with SaberMod toolchain 4.7.4
I/O Scheduler
BFQ
CFQ
DEADLINE
FIOPS
NOOP
VR
ZEN
FIFO
TRIPNDROID
SIO
CPU Governor
Conservative
Interactive
Ondemand
Performance
Powersave
Sprdemand
Userspace
CPU
Fix CPU clock stuck at max clock.(In stockrom need turn on powersave in quicksetting toggle)
Support for Fast-IDLING of CPU
Remove OC and use max clock 1.2GHz
Memory
Support Low Memory Killer
Zram set to 200mb
Kernel Samepage Merging
Battery
Support for the new PowerSuspend algorithm
Other
Support for Dynamic-FSync
Support USB fast charge (EXPERIMENTAL)
Support power suspend (Mode and State)
HID Keyboard + Keyboard
Support for CRC-Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Reduced Kernel Log Buffer to minimum
Enable all TCP congestions
For use this kernel your device must be rooted and have busybox installed also recommended use kernel adiutor as a control apps. I will give the link in download section. Then how to install? just flash the kernel installer use TWRP/CWM.Then explore the kernel's features use kernel adiutor.
Benchmark result
SAKernel v1.2 :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SAKernel v1.3 :
SCREENSHOOT:
Go my Album HERE
DOWNLOAD SECTIONS
SANDROID KERNEL v1.2
SANDROID KERNEL v1.3
BUSYBOX PRO
KERNEL ADIUTOR
CREDITS:
@doesntexits for all commit in his kernel source(I am kang from his commit)
All Developers who dev Busybox and Kernel Adiutor
And you're who use and respect with this work
For Indonesian people you can visit my blog you can find my work in Indonesia language HERE
Ok I think enough for this post I will add features and modify again if I can . Thank you .
XDA:DevDB Information
SandroidKernel, Kernel for the Samsung Galaxy Core
Contributors
Ih24n
Source Code: https://github.com/ih24n69/android_kernel_samsung_kanas/tree/master
Kernel Special Features: nothing special
Version Information
Status: Beta
Current Beta Version: 1.3
Beta Release Date: 2016-09-05
Created 2016-09-16
Last Updated 2016-09-16
Maybe any people want to try .
@Y300-0100 @revomalik @nirav1996 @baddan @AnDrOiiiD_YT @MicroZans @Joaquin Scala @FedericoPeranzi @asser19 @cmtester @axrav @suckmyass @Strain Grip @shafiqbd50 @ryuzakii24 @dRbXDA @eXynius
@Nexxit99_Gaming @dhiru1994 @LeonAltair @killerdoor @durbaca @samuel.freitos @gregoriaz @rafael_scostaa @Samuel2599 @hahanhata123 @Panzukk @Pradeep negi @DarkBloods @bngbrian @ECr34T1v3@Caio99BR@kvsjxd
@Anish Prasad
Thanks for this!!:good:
It's working perfectly!
Ih24n said:
Maybe any people want to try
I give it a 10/10, good work ihsan
Click to expand...
Click to collapse
Nice kang bro :3
Anyway, try porting CPU hotplugs from my kernel source. They will replace sprdemand governor
Samuel2599 said:
Thanks for this!!:good:
Click to expand...
Click to collapse
If you find a bug please tell me
bngbrian said:
Ih24n said:
Maybe any people want to try
I give it a 10/10, good work ihsan
Click to expand...
Click to collapse
Fimd a bug and tell me
Click to expand...
Click to collapse
doesntexits said:
Nice kang bro :3
Anyway, try porting CPU hotplugs from my kernel source. They will replace sprdemand governor
Click to expand...
Click to collapse
Hihihi I already try that and at the end give me sammy logo ... I will try again....
Thanks before for a lot of your commit on your source .
Ih24n said:
If you find a bug please tell me
Click to expand...
Click to collapse
No bugs so far...ive tested it
@Ih24n
Plz help,after flashing your kernel my baseband and imei have become unknown and the sim is also not recognized
Usmandexter said:
@Ih24n
Plz help,after flashing your kernel my baseband and imei have become unknown and the sim is also not recognized
Click to expand...
Click to collapse
What version which you use?
First restore the stock kernel and see baseband null or not. If still null maybe you wipe something.
Ih24n said:
What version which you use?
First restore the stock kernel and see baseband null or not. If still null maybe you wipe something.
Click to expand...
Click to collapse
I used version 1.3
I didnt wipe anything
Can u provide me the stock kernel plzz
Also my efs folder is not empty it has the imei folder in it
@Ih24n
I flashed the stock rom via 0din and the sim started working again
Then i again flashed the kernel via twrp just by flashing the zip and not wiping anything but again the baseband became unknown
Plz can u help me out because only i am facing this issue nobody else has reported it yet
I had made a backup of efs folder too
But even after restoring it after flashing kernel did not restore baseband
@Usmandexter emm I mean your device is SM-G355H or SM-G355HN or SM-G355M ?
Ih24n said:
@Usmandexter emm I mean your device is SM-G355H or SM-G355HN or SM-G355M ?
Click to expand...
Click to collapse
It is g355h
Get Cyanogenmod12.1 Lollipop here : http://forum.xda-developers.com/showpost.php?p=68826857&postcount=1193
Ih24n said:
Get Cyanogenmod12.1 Lollipop here : http://forum.xda-developers.com/showpost.php?p=68826857&postcount=1193
Click to expand...
Click to collapse
Your kernel source code for kanas that i try to compile by using your toolchain in builds
and sandroid_kanas_defconfig.an error occurs it said like "import suspend-power.h but not use"
What wrong
Nuttapat007 said:
Your kernel source code for kanas that i try to compile by using your toolchain in builds
and sandroid_kanas_defconfig.an error occurs it said like "import suspend-power.h but not use"
What wrong
Click to expand...
Click to collapse
will update later... Sunce I am new on git make trouble when I add commit which include new file
Ih24n said:
will update later... Sunce I am new on git make trouble when I add commit which include new file
Click to expand...
Click to collapse
Update will be very nice, you did a wonderful job for this device
Games lag a lot
Plz help me after flashing this kernel my battery has improved alot but the games started a to lag a lot...games run like if I have enabled power saving in stock kernel and I have also tried to change governors clock speed and i/o scheduler but no luck...please tell me how to fix it I really want to keep it for its battery!
Related
Bhel Kernel
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
About:-
Bhel kernel is directly from CyanogenMod msm8226 kernel with custom features added by me.
My aim is to provide users a stable kernel(3.42) and stable toolchain(gcc 4.8) without any optimization flags or something else while not compromising about the features.I will try my level best to keep my kernel as simple as possible with all the required features keeping both performance and battery in mind.
I will not add d2w,s2w or anything related to it in future builds neither make another version with d2w
Features:-
*Compiled with GCC 4.8 toolchain
*Stable kernel version
*SELinux permissive
* kexec-hardboot patch
*Disable MPDecision and enable Intelli_Plug
*Simple GPU Algorithm
*Added optimized ARM RWSEM algorithm.
*KCAL v_2
*ARM: add support for kernel mode NEON
*Optimize slub by not using fair sleepers
*Add SIO, VR and ZEN I/O schedulers
*TCP Congestions
*Usb fast charge v2
*GPU overclock
*GPU underclock
*Reclaim RAM from loggers
*Governors
-Smartmax
-DanceDance
-Intelliactive
-Intellidemand
-LionHeart
-Interactive
-Conservative
-Userspace
-powersave
Instructions:-
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
Downloads:-
Bhel folder
Credits:-
@Flashhhh
@hurtsky
@SohamJ
@YoshiShaPow
@faux123
@alin.p
@Alberto97
@chijure
@fransiscofranco
others who expected a credit but I didnt give
XDA:DevDB Information
Bhel, Kernel for the Moto G
Contributors
srisurya95
Source Code: github.com/srisurya95/Bhel_kernel_falcon
Kernel Special Features:
Version Information
Status: Stable
Created 2015-10-11
Last Updated 2015-10-11
Changelog
-initial release
FAQ:-
1)You bricked my device,it isn't booting anymore
- flash the kernel in falcon
2)Can you add d2w in next build?
-No
3)Can I flash this on stock ROM?
-Nope,read the thread title
4)I have falcon and this kernel isn't booting
-Make sure that you are on default kernel of the ROM
5)Recommended settings for battery?
-Just flash and chill
6)Op is a retard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any chance of DT2W masala flavor
Sent from my falcon using Tapatalk
reversegear said:
Any chance of DT2W masala flavor
Sent from my falcon using Tapatalk
Click to expand...
Click to collapse
OP,FAQ clearly answers your questions
Can we have cpu overclock like kaminari kernel do but on cm? It will become something very new then.
motolollipop said:
Can we have cpu overclock like kaminari kernel do but on cm? It will become something very new then.
Click to expand...
Click to collapse
No cpu over/underclock,sorry
Why I can't change selinux back to enforcing by selinux changer(kernel adiutor) or selinuxmodechanger?Always permissive and can't change?
ysop said:
Why I can't change selinux back to enforcing by selinux changer(kernel adiutor) or selinuxmodechanger?Always permissive and can't change?
Click to expand...
Click to collapse
Yes,I made it permanently permissive....its okay I'll remove it in next build
do i see right, no faux sound ?? NICE! no faux sound no d2w, ... awesome!!
NeoPreacher said:
do i see right, no faux sound ?? NICE! no faux sound no d2w, ... awesome!!
Click to expand...
Click to collapse
Yes,will not be added anytime later too.. [emoji14]
Faux sound conflicts with some other things and d2w will makes my screen unresponsive sometimes
Sent from my Moto G using Tapatalk
srisurya95 said:
Yes,will not be added anytime later too.. [emoji14]
Faux sound conflicts with some other things and d2w will makes my screen unresponsive sometimes
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
finally someone who realizes and act! thanks for that. the last one who did it that way was attack11 and i was sad he stopped his project. but now there's new hope. again thanks for that and keep it growing :good::good:
Im not doubting you or asking you to include fauxsound just wondering what conflicts it causes?
Nice kernel.
n0ts0smart said:
Im not doubting you or asking you to include fauxsound just wondering what conflicts it causes?
Nice kernel.
Click to expand...
Click to collapse
Idk but my friends were complaining that it was conflicting with viper 4androod
Sent from my Moto G using Tapatalk
Yes, that's true. In many Rom/kernel configurations v4a conflicts with fauxsound. It's been reported from time to time.
tested now for two days and it's running very good on exodus. ui reactions like they should be,snappy and smooth. using interactiv govenor and fiops io 512kb, everything else untouched
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Lenovo A6000/A6000plus. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Lenovo A6000/A6000plus user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CHANGE LOG:
God's Kernel-R1
Alucard Hotplug
MSM_hotplug
NEON optimized kernel
exFAT support
USB Fast Charging
Fsync toggle
CPU OC to 1.6Ghz
GPU OC to 465 Mhz
selinux will be permissive on boot but can we changed
KSM
KCAL v2
allow userspace config of simple_ondemand
Intelli_Thermals V3.0
Adaptive LMK
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
Power efficient work-queues
added few more wakelock fixes
Governors
-impulse
-elementalx
-yankactive
-darkness
-alucard
-zzmoove
I/O Schedulers
-SIO
-FIOPS
-BFQ
Zram backport from mainline Linux 4.1
VM reclaim
KSM
adreno idler disabled by default (enable if you wanna save some battery)
build with UBER TC 4.9 (arm/aarch64)
lots of more stuff
God's Kernel-R2
- fix wifi issue, now we use wifi modules build from sources instead of the hacky workaround
- radio issue
- add vibrator sysfs
- general cleanup of the defconfig to remove unwanted things
- switched back to Powersuspend
- and if forgot other changes xD flash n tell me xD
DOWNLOAD LINKS:
32 Bit
GK_A6000_32_18042016_0847.zip - 6.27 MB
64 Bit
GK_A6000_64_18042016_0852.zip - 8.85 MB
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@Sourav_8434
@kafura
@Biplov Biswas
@Ahmad Tawfik
Thanx to @Mr.AW for helping me with the WiFi patch
Huge thanx to @chhapil for the kernel sources
XDA:DevDB Information
[KERNEL][MM/LP][32/64 bit][18-04-2016] God's Kernel R2, Kernel for the Lenovo A6000/Plus
Contributors
Tarun93
Source Code: https://github.com/tarunkapadia93/gk_a6k/tree/gk
Kernel Special Features: CPU OC 1.6Ghz, GPU OC 465 Mhz, USB fast Charging, Adaptive LMK
Version Information
Status: Stable
Current Stable Version: R2
Stable Release Date: 2016-04-18
Created 2016-02-26
Last Updated 2016-04-18
Reserved
Reserved
the kernel will work with all 32/64 bit LP/MM roms
pls dont flash it over stock KK/CM11 it doesnt support it
Peace out
Thanksss.! @Tarun93 finally God arrived on A6000 to bless all.!
its work on stock LP 5.0.2 s059?
crashdjent said:
its work on stock LP 5.0.2 s059?
Click to expand...
Click to collapse
Yes if it is 32 bit then flash 32 bit kernel ,otherwise flash 64 bit kernel.
WI-FI bug, download too slow, 70 MB for 10 minutes download app from google play store. How to fix ?
crashdjent said:
its work on stock LP 5.0.2 s059?
Click to expand...
Click to collapse
64-bit and yes it will
Sparco21 said:
WI-FI bug, download too slow, 70 MB for 10 minutes download app from google play store. How to fix ?
Click to expand...
Click to collapse
Dirty flash the rom and gapps.
Sourav_8434 said:
Dirty flash the rom and gapps.
Click to expand...
Click to collapse
I use stock lollipop s059.
Deleted
Thx
crashdjent said:
Deleted
Thx
Click to expand...
Click to collapse
Me too
@Tarun93 bootloop after flashing on stock lp s059
For custom roms...do we need to change ramdisk
Please add dt2w feature
Please add f2fs support and fiops io in next version
@Sparco21,How you flash x32 kernel on stock s059? When i flash this kernel i have a bootloop
crashdjent said:
@Sparco21,How you flash x32 kernel on stock s059? When i flash this kernel i have a bootloop
Click to expand...
Click to collapse
Download .rar file for 32 bit put on sd card , boot twrp recovery , flash .rar file and reboot and worked.
@Sparco21 after reboot lenovo logo lights up then the phone vibrates and again shows lenovo logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Some Kernel Features-
Adreno idler and adreno boost are available, off by default
Mild undervolt for our cpu, reduces heat, helps battery backup
Removed cpuquiet
Added relaxed governor
Added NTFS Support
Added KCAL Support
Enable Arch Power
Enable ADRENO IDLER
INSTALLATION STEPS:
Download correct version of Overload kernel
Make backup of system, boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
Enjoy
DOWNLOAD LINKS:
EUI/MIUI
overloadmiui-v-2.5.zip
NOUGAT
overload-nougat-v-2.5.zip
Pie & Oreo
Download
Source code:Github
Credit:
sandymanu
kabirkalsi
neobuddy89
vireshk
franciscofranco
rishabhrao
savoca
jcadduono
Alexey71
dragonGR
Umang96
arter97
frap129
Meninblack007
codeworkx
Donate If You Like My Work:-
PayPal
XDA:DevDB Information
Overload Kernel, Kernel for the LeEco Le 2
Contributors
renjian
Kernel Special Features:
Version Information
Status: Stable
Created 2017-10-01
Last Updated 2019-02-18
Overload-v4.01
Nougat
https://www.androidfilehost.com/?fid=673956719939831188
Miui
https://www.androidfilehost.com/?fid=746010030569965456
changelog
removed KCAL
added boeffla wakelock drivers
kernel upstream 3.10.108
removed [PATCH] UKSM 0.1.2.3
old version
Overloadv3.9
https://www.androidfilehost.com/?fid=889964283620777983
changelog:
patch UKSM 0.1.2.3
Decrease Time to enter Sleep Extensively
Linux 3.10.108
Overload-v3.8
miui/eui
http://linkshrink.net/7Hy1k0
change log
Kernel upstream from 84 to 106
disable cpuquiet
Overloadv3.8
nougat:http://linkshrink.net/72JMoj
change log:
Kernel upstream from 84 to 106
Overload V3.7
Nougat
http://linkshrink.net/7YIplz
change log
Mild undervolt for our cpu and gpu
UPSTREAM: drivers/input
Added Relaxed governor
and many things
Overload v3.1
Nougat
https://www.androidfilehost.com/?fid=817906626617949332
changelog
Fixed hotplug
Without net hunter support
Recommended to use this 1
Overloadv2.5
Miui
https://www.androidfilehost.com/?fid=889964283620763279
Nougat
https://www.androidfilehost.com/?fid=889964283620763280
Changelog
enable all 8 cores during bootup
3.10.94 CAF tag
Implement zen-tune v4.5
zen-tune: Increase BLKDEV_MAX_RQ to 32
WiFi fixed for miui
added core control
Overload v2.3
Nougat
https://www.androidfilehost.com/?fid=673791459329052874
Miui
https://www.androidfilehost.com/?fid=673791459329052871
Change log:
Added darkness Governor
Off cpuquiet
Removed Kali nethunter support
Fixed audio
Added wq power efficient
Lowest GPU initial power to 3
Removed Frandom RNG driver
old update for nougat:
Overloadnougat_v2.1.zip
change log:
Added Support For Kali NetHunter
Added Maple I/O Scheduler
used Lowest GPU-Frequency as Initial Power Level
Touch-Boost Optional
Added frandom RNG driver
enable cpuquiet
Add NTFS Support
old build:
Overloadmiui_v2.1.zip
changelog:
Added Maple I/O Scheduler
used Lowest GPU-Frequency as Initial Power Level
Touch-Boost Optional
Added frandom RNG driver
Fix led for miui mm
enable cpuquiet
Add NTFS Support
SUPPORTED DEVICES:
LeEco Le 2 X520
LeEco Le 2 X526
LeEco Le 2 X527
LeEco Le S3 X522
Telegram Support:
Click here
To run all cores just use this setting in kernel auditor,
use any governor u want and in CPU Hotplug ->minimum cpus big->make online all 4 cores
Man the best kernel for leeco le 2 but why don't work led notification!thank you for kernel
Cabr said:
Man the best kernel for leeco le 2 but why don't work led notification!thank you for kernel
Click to expand...
Click to collapse
Firstly , Notification LED Never works is due to MiUi ROM
Stop Blaming US Kernel Developers
Man, what do cpuquiet, adreno idler and adreno boost mean? Sorry for that question, I'm just a noob.
cristianmaral said:
Man, what do cpuquiet, adreno idler and adreno boost mean? Sorry for that question, I'm just a noob.
Click to expand...
Click to collapse
Google it
bonsai.14 said:
Google it
Click to expand...
Click to collapse
Thank you a lot for that answer, it really helped!
Which one is better,illusion kernel or this one?
DarknessKiller said:
Stop Blaming US Kernel Developers
Click to expand...
Click to collapse
That can be misunderstood US in capital letters is usually United States (of America), I guess you meant us :good:
Ggenzy said:
Which one is better,illusion kernel or this one?
Click to expand...
Click to collapse
That depends, try both and take the one, that's better for you.
No one, except you, can tell you which one is better for you.
can i install this on 19s stock?
@DarknessKiller @renjian What changes were required on Le official source to get it working? How do you switch compiling for Nougat or EUI?
cjcool_123 said:
can i install this on 19s stock?
Click to expand...
Click to collapse
yup
I installed it on Los 13. Nothing negative to say at the moment.
Geekbench score remains the same. Overall performance is a bit smoother although. Battery a little better maybe.
It seems Open camera got much more stable... but this may change, already had this ok for some days with other kernels
FridrufHau said:
I installed it on Los 13. Nothing negative to say at the moment.
Geekbench score remains the same. Overall performance is a bit smoother although. Battery a little better maybe.
It seems Open camera got much more stable... but this may change, already had this ok for some days with other kernels
Click to expand...
Click to collapse
Can you please show the scores on geekbench 4 with LOS 13?
cristianmaral said:
Can you please show the scores on geekbench 4 with LOS 13?
Click to expand...
Click to collapse
It is 1397 single core and 3223 multicore.
Phone is unrooted.
Was at 3800 multicore on Los 14 roms, but always sleeping cores....
Omg!! got 6:30+ sot on nougat roms
FridrufHau said:
It is 1397 single core and 3223 multicore.
Phone is unrooted.
Was at 3800 multicore on Los 14 roms, but always sleeping cores....
Click to expand...
Click to collapse
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
cristianmaral said:
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
Click to expand...
Click to collapse
No sorry, want selinux strict and phone unrooted
cristianmaral said:
For sleeping cores try changing the selinux to permissive and keep kernel auditor on background, it worked for me.
Click to expand...
Click to collapse
U don't need do anything like that I will just attach the screen shots ....
Yash98 said:
@[email protected] What changes were required on Le official source to get it working? How do you switch compiling for Nougat or EUI?
Click to expand...
Click to collapse
I didn't use le 2 source ,using lineage kernel source
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void lmao.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INTRODUCTION
Lolz Kernel makes your device even snappier than before. Being a battery happy and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! Lolz Kernel main priority is efficiency and battery. More Fuel plus More Smoothness equals More Fun.
Supported Galaxy Note 3 Variants(codename):
* hlte/hltexx/hltespr
* hltechn
* hltekor/ktt/skt
*hltetmo
Supported Android Version:
* Android 9 (PIE)
* Android 10
* Android 11
* Android 12
Supported ROMs:
* All AOSP based ROMs
* All CAF Based ROMs
* All LineageOS Based ROMs
Major Features: (Current Lolz Stable Release)
* Splashloop Proof Since V9.0
* Compiled with LOLZ CLANG 15.0.0
* Systemwide WQ_POWER_EFFICIENT
- BACKPORT: WORKQUEUE From Linux 3.10
- BACKPORT: RCU From Linux 3.8
* BACKPORT: F2FS from Linux 4.12
* Custom CPU governors: Lolznappy, Elemental-X, Nightmare, Alucard, Intelliactive and zzmoove.
* Lolznappy CPU Governor as default.
(LOLZ Kernel own CPU Governor, Based on AOSP Interactive with lot Patches from Upstream and the Open Source Community, tweaked and Optimized for Balanced Usage)
* CPU Input Boost by sultanxda
* CPU Voltage Control
* MSM Limiter Added
* Fully Disabled MPdecision
* CPU Hotplug Drivers: LazyPlug, Mako Hotplug, Bricked/MSM Mpdecision and Blu_plug(Experimental)
* CPU Underclock and Overclock: 268MHz to 2496MHz (2265MHz is the default max frequency for Balanced Usage)
* GPU Underclock and Overclock: 100MHz to 600MHz (27MHz @ Idle)(450MHz max default for Balanced Usage)
* GPU: Adreno Idler
* Double tap 2 wake
* Boeffla Sound Control
* TCP Congestion: Westwood as default
* Screen: K-lapse v5.0 & KCAL
* Custom Schedulers: Fiops, Maple, Fifo, VR, SIOPlus, Tripndroid, ZEN
* FIOPS as default IO Scheduler
* USB/AC Fastcharge V1.3
* Underhood Optimizations, Code fixes and Tweaks
How to install?
* CLEAN KERNEL FLASH METHOD:
- Read Carefully!(you need to do this every time you flash this custom kernel)
1. Be sure you are not using any Custom Kernel.. If you are, then you need to dirty flash your ROM or just flash the stock boot.img of the ROM you are using.(You can get the boot.img of your ROM by Extracting the ROM.zip)
2. Goto TWRP then flash Magisk(Magisk zip first when you are on Android 9, If you are on Android 10 You need to flash Magisk after flashing Lolz kernel zip)(if you do not need root then skip this)
3. flash the Lolz kernel zip.
4. Reboot(just wait for it to boot)
5. Enjoy .
* DIRTY FLASH METHOD (For LAZY Users)
1. Reboot to TWRP Recovery ( I will assume that you have this Custom Recovery )
2. Flash Magisk Zip (Not needed if you have installed this on previous kernel already)
3. Flash the Lolz kernel zip
4. Reboot
5. Enjoy being dirty
Donations are very much appreciated..
Thanks for supporting Lolz kernel
My Donation link
NOTES:
* DO NOT USE ANY MODULE TWEAKS like NFS, Fde.AI etc... Only Module i can suggest is Lspeed Magisk Module.. but still don't Complain about bugs or anything if you use any automatic tweak modules.
* Recommended Tweaking App: SmartPack Kernel Manager (The Official Successor of Kernel Auditor)(Only Use Tweaking app if you really know what you are doing)
DOWNLOAD LINK: (Current LolZ Stable Release)
https://www.pling.com/p/1410846/
You want to be testers, ask questions or just want to talk to hlte users?... Join the fun now: (hlte TG group): https://telegram.me/galaxynote3_official
Kernel Source: Click here boi
Thanks to:
Linux Devs
AOSP Devs
Samsung Devs
and to all devs, contributors and testers out there...
XDA:DevDB Information
Lolz-Kernel, Kernel for the Samsung Galaxy Note 3
Contributors
jprimero15
Kernel Special Features: Smooth + Battery friendly
Version Information
Status: Stable
Created 2019-07-18
Last Updated 2022-02-07
***Rules for Feature requests***
1. I Can accept feature requests.
2. I Can ignore feature requests.
3. At least give me the commit's link of feature you want.
***Rules on reporting bugs***
1.Give logs.. (There are lot of tutorial here in xda on how to get logs)
2. Wait for it to boot maximum of 3minutes.. (If u did wiped /data/dalvik-cache it will take more time)
3. Which variant you have.. Hlte/chn/tmo/kor/spr?
4. What ROM, build date and other info about the rom you are using currently..
5. Be sure you followed the proper installing procedure.
6. If you want root then i recommend MAGISK.
7. Be sure you clear data all of your tweaking app first before installing example: kernel auditor, lspeed etc..
8. Say what Lolz version you are using (example: Lolz V9.1)
And plz try other version too...
9. Be sure that the problem is not ROM's fault..
10. Report all of this here.
Oof
Will test & update
Good to see a new thread for the Note 3.
Kernel is working great, many thanks @jprimero15
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
ammar_maher said:
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
Click to expand...
Click to collapse
Device with Lolz is charging at 1800mA here.
ammar_maher said:
Good to see a new kernel
BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
Click to expand...
Click to collapse
The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...
jprimero15 said:
The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...
Click to expand...
Click to collapse
Im using original cable and charger
ammar_maher said:
Im using original cable and charger
Click to expand...
Click to collapse
Try changing cable or whole charger.. Maybe that's old and not functioning properly now.. And maybe ur phone detecting your charger as "USB Charger" instead of "AC Charger" it should be detected as "AC" and. Mine is working properly with fastcharge.. It works
Working
Testing! Thanks for the present, mate! So far so good!
jprimero15 said:
Working
Click to expand...
Click to collapse
Same here but different device SM-N9008V
You just brought back nougat's SOT (normal use). What I can say is that the phone is heating up during the games (no problems in nougat). Overall state good :good:
Bogdan010 said:
You just brought back nougat's SOT (normal use). What I can say is that the phone is heating up during the games (no problems in nougat). Overall state good :good:
Click to expand...
Click to collapse
I think heating is normal for every Oreo roms in our device..
jprimero15 said:
Working
Click to expand...
Click to collapse
Installed on Tmobile note 3 SM-N900T with @vidwhal Oreo Rom, working fine, improved battery life.
Many thanks for your work
After I flashed I reboot then it said " Could not do a normal boot " I'm using SM-N900K . Can someone help me
Loc Truong said:
After I flashed I reboot then it said " Could not do a normal boot " I'm using SM-N900K . Can someone help me
Click to expand...
Click to collapse
Read post one . <<his kernel is for all galaxy note 3 snapdragon variants>>
Is your N900K Exynos model ??
One listing shows snapdragon and exynos models
JJEgan said:
Read post one . <<his kernel is for all galaxy note 3 snapdragon variants>>
Is your N900K Exynos model ??
One listing shows snapdragon and exynos models
Click to expand...
Click to collapse
My N900k is using snapdragon
Loc Truong said:
My N900k is using snapdragon
Click to expand...
Click to collapse
Contact me in telegram plz.. Not fully tested for KOR yet.. But i can make it work if u go to telegram(coz need help a little bit from a KOR user).. Im just waiting for a tester for KOR variant..
Are you missing the gestures ,CPU & GPU OC,USB Fastcharge ,Voltage Control and many other features that could only be available in sense based ROMS kernels ; if so, GOOD NEWS for here comes the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
I am not responsible for bricked devices, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this KERNEL before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Introduction / Readme (Important)-
The Tharsis kernel is a custom kernel aimed for giving you the best experience in your device.All the features and customizations that i have added or modified have been done taking both performance and battery life to achieve the best stability.
There is actully no custom kernel for the M7 nougat ROMs (having features/tweaks to be called a custom kernel).So finally I decided to compile a kernel for the nougat ROMs with as many features as I could add.
Special Thanks to-
CandyRoms team-
@gimmeitorilltell
@NoSpamDan
@kdp162
@CertifiedBlyndGuy
@axxx007xxxz
@Flashalot
@rohitporoli
@Venomtester
for proving base kernel and making your source open.I couldn't have done all of this on my own..I really thank the CandyRom team and all the contributors who developed such an amazing kernel( Some of these features and memory leaks and other stuff ,it would have been impossible for me to do, if they weren't already ). Anyone else that should be named here Please notify me via e-mail or private message.I will be glad to place your name here. I am not skipping anyone intentionally.Here is the link to their ROM page where you can find all the imformation and links necessary - https://forum.xda-developers.com/sprint-htc-one/development/rom-t3487666
Thanks to-
@flar2 and all the contributors of ElementalX for making the kernel source open,It really helped me a lot while I was developing this kernel.
Features-
Linux version 3.4.113
Compiled using arm-gcc.4.8
Compatibility with all almost nougat ROMS
ZRAM(lz4 & lzo compression)
Voltage Control
Gestures( DD2W,L2W,S2W,L2M,Pocket detection)
USB Fastcharge
Vibration Intensity Control
Tons of I/O Schedulers( noop, deadline, cfq, fiops, sio, bfq ,row & zen(new) ) and CPU Governors ( Lagfree,Intelliactive,Intellidemand,SmartassV2,Smartmax,Badass,Interactive,Conservative,Ondemand,Userspace,Powerspace,Lionheart,Performance)
Unlocked CPU and GPU frequencies-
Mild CPU Overclock (1836MHz)
GPU Overclock (450MHZ)
Set Selinux to Permissive permanently
Optimized square root algorithm
msm sleeper(updated)
Added sysfs entry for maxscreenoff
HDMI 1280x720p60
Blinking Buttons
Optimized Deadline I/O Scheduler: Allow 0ms deadline latency, increase the read speed
Reduced wlan_htc wakelock a little
Allow moc-crypto and texfat modules to load
hsic tweaks
Reduce wlan_ctrl_wake and wlan_rx_wake wakelocks
Reduced the wakelock time of RX packet
Better Performance & Power Efficient
Added some Minor optimizations and features.
.
Download
TharsisV1.0[N]
DON'T FORGET TO HIT THE THANKS BUTTON :good:
Installation-
This kernel is compatible with almost all Nougat ROMs for this device. Whichever ROM that you are running make sure that you are running the latest version(also 7.1.2 is perfered for any Nougat ROM).I have tested this on the lastest build of XenonHD (Screenshots) and CandyROM.It should work fine with other Nougat ROMs too.Do mention if it is incompatible with any ROM and i will try to fix it.
Please read this thread completely before using. If you are coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flashing this!Also backup your stock Boot image just in case.
Click to expand...
Click to collapse
Instructions-
1. Download kernel from the given link.
2. Place the zip in internal storage or usb otg.
3. Reboot to recovery and Flash it.
4. Wipe Dalvik/Art Cache & Cache( Important ).
5. Reboot and once done ,reboot again(Give the kernel some time to settle first).
Note-After installing or during first reboot if you are stuck on the HTC logo/splash screen or are taken to recovery ,no need to panic,press the power button to power off and then power it on or boot to recovery , once you are in recovery ,just reboot system from there.Before reporting any bugs or problems please let the kernel settle down and after you have used it for a few days ,then report the problems.
It took a lot of time for me to port these features and test them on my own.So, Do consider donating if you liked my work.:angel:
Do mention if you feel I should add any more features and I will try my best to port them.
Thank You!!
XDA:DevDB Information
[AOSP]Tharsis Kernel[Nougat], Kernel for the HTC One (m7)
Contributors
vicious98
Source Code: Nougat
Kernel Special Features: Added new features
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-05-08
Created 2019-05-08
Last Updated 2019-05-08
Welcome! good news that is no longer updating
crownvn said:
Welcome! good news that is no longer updating
Click to expand...
Click to collapse
What is not longer updating?
vicious98 said:
What is not longer updating?
Click to expand...
Click to collapse
it means that M7 is old version from 2014 and kernal has not after long time until up to now it has from you with quick charge :good:
thx for the new kernel.do you plan a port for oreo?
daywalk3r666 said:
thx for the new kernel.do you plan a port for oreo?
Click to expand...
Click to collapse
I used oreo for a while. But the ROM itself is not too stable.Modifing the kernel might cause cause it to crash.I might try it later on,though.
@vicious98 What is app that you capture the screen to check and view battery level and enable fast charge?
crownvn said:
@vicious98 What is app that you capture the screen to check and view battery level and enable fast charge?
Click to expand...
Click to collapse
EX Kernel manager.Though any other kernel manager should be fine too.
working fine no issue on lineage
OK so I flashed kernel for the first time its working I can say its in ex kernal manager. What customizations should I do will be too much yo ask as there are a lot of options. But should I just turn on all of them?