Database Info

Get your own CWM recovery for newer devices and dont beg anywhere - 2 simple steps

Those who struggle to get CWM recovery for thier newer devices and who are facing problem on romdump your stock rom to get stock recovery.img here you have 2 simple steps to get your CWM recovery for your new device
Step -1
Creating A Dump\Backup
Note: Root Required
1. Set "Settings" -> "Display" -> "Sleep" -> "10 minutes"
2. Install or update "Busybox" from play store
3. Set your phone to "Airplane" mode
4. Make sure that the card is not less than 2Gb of free space
5. Use any one of the following:
BakupTool_sdcard.zip saves a backup copy on the path: /mnt/sdcard/backup_v2
BakupTool_sdcard2.zip saves a backup copy on the path: /mnt/sdcard2/backup_v2
6. Extract the BakupTool_* to sdcard. Full path to the file should be: / sdcard / gscript
7. Install program: /sdcard /gscript /"GScriptLite.apk"
8. Open the program "GScriptLite". Press "Menu button" -> "Add Script"
9. Set tick "Needs SU"
10. Click "Load file" and select "back_mt657x.sh"
11. Click the button "Save"
12. Tap on a new script, "back_mt657x.sh". After that give the program root permissions if asked and wait for 5- 10 minutes. Do not use the phone during the process.
A sign of a normal shutdown of the script is:
Message in the terminal:
100% Backup Complite!!!
Saved to / sdcard/backup_v2/GGGGMMDD-ChChmm
Star Time: hh: mm: ss; End Time: hh: mm: ss
The appearance at the root of SD-card phone the following structure of folders and files:
backup_v2
YYYYMMDD-hhmm
* BDRS-YYYYMMDD-hhmm
boot.img
cache.ext4.tar
data.ext4.tar
nandroid.md5
recovery.img
system.ext4.tar
* misk
cache.img
cmdline.info
config.info
cpu.info
nvram.img
nvram.tar
ram.info
rom.info
* over
expdb.raw
full_preloader_part.raw
misc.raw
pmt.raw
sec_ro.raw
seccfg.raw
unknown.raw
boot.img
dsp_bl.img
ebr1.img
firmware.info
MT6577_a4_v2c.info
logo.img
mbr.img
preloader.img
recovery.img
system.img
uboot.img
data.img
step - 2
upload your stock recovery.img to get cwm recovery
kaushik Dutta has developed a clockworkmod recovery builder on the official site....
http://builder.clockworkmod.com/
so upload your stock recovery.img and get exact cwm recovery.img of ur device....and flash it.
if yours is a new devicw please select new device column.
thanks for this awesome build.
- after u upload your stock recovery.img on clicking fro new device just click on Build icon on the last of the page.....
- then u will be qued and u will gwt build number please save it for further refference...
- click proceed to that server and find ur build number,,,if it finished successfully u will see green icon on the left
- then click on your build number then click status there u will get something like this
Project recovery
Last Successful Artifacts
android_device_lge_cayman.zip 5.12 MB
inputrecovery.img 16.00 MB
manifest.xml 53.95 KB
recovery.img 6.92 MB
finally download recovery.img which is ur cwm recovery and flash it via Mobileuncle MTK tools which can be downloaded from playstore
If something goes wrong u can revert back ur rom or stock recovery itself by flashing ur stock recovery.img from the back up folder...or u can flash ur rom back using SP FLASH tools
IF i helped u please press thanks :victory::victory::victory:

anybody tried???
meanwhile how to extract stock recovery.img from stock ICS

I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162

Re: clockworkmod for newer devices - now get CWM recovery for every android
[email protected] said:
I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162
Click to expand...
Click to collapse
Dumping rom is bit confusing....because I'm a dentist...
Can u please explain in simple steps to get stock recovery.img
I'm having intex aqua flash which is new in the market but it has all the feature of high devices...
One more thing can I do this in windows? Or should I need linux?
Sent from my Aqua flash using xda premium

Trying this right now. Hope the recovery.img from a stock nandroid works.

Re: clockworkmod for newer devices - now get CWM recovery for every android
McJesus15 said:
Trying this right now. Hope the recovery.img from a stock nandroid works.
Click to expand...
Click to collapse
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium

Re: clockworkmod for newer devices - now get CWM recovery for every android
drganbds said:
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
My device is different. Technically I have cwm recovery already. It's just only accessible through a fast boot command. This allows me to have a nandroid back up already so I just took the recovery.img from a stock back up
Sent from my Zio using xda app-developers app

check this thread is updated...

I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.

linsalata28 said:
I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.
Click to expand...
Click to collapse
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium

drganbds said:
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.

linsalata28 said:
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.
Click to expand...
Click to collapse
If it gives error like black screen or volume key unfunction means it is not compiled properly but don't worry your device won't brick and u can revert back ur recovery by placing original.img on the root of phone storage and flash through mobileuncle tool..all the best
Sent from my Aqua flash using xda premium

Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?

ApplePriest said:
Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?
Click to expand...
Click to collapse
1. Yes u can reflash you stock recovery back via mobile uncle tool
2. Yes it will work on ICS
3. I have shown that wat the backup folder will have...it does full backup of your phone....
Sent from my Aqua flash using xda premium

Okay, Thank you.
I will try and update you on this.
Edit: After flashing recovery, I got blank screen in recovery mode.

thanx mate , really a helpfu guide i have Xtouch x714 with Allwinner A13 chip
before i tried many A13 CWM none of them worked not even boot , they nearly damage my tablet
thank god there is Phoneixcard i was able to revive it .
Anyway , your methode of getting the recovery.img from [gscript] did not work for me , it kept give me errors
even though it shows 100% complete
so i used another method to get my recovery.img , hence my tablet is an Allwinner A13 chip, so
i used [ Rom Dump ] which a small and powerful tool run it in Windows from [ http://www.techknow.me ]
it uses ADB so u have to be rooted and enable developer mode in your device and have ADB drivers in your PC
it backup image of your system and boot.img , recovery.img and data
so i used the extracted recovery.img in the site you provide me and i got my new recovery.img and flash it to my tablet via NovoTools 1.0
and i test it , it works like charm , thanx again mate really helpful

step 2 no working....website down?

Black Screen
When I flashed recovery made through it, it gave me a black screen Is there any way to fix this??

the online one is not working
i tried twice for micromax a84... i got the CWM recovery and flashed it via mobile uncle tools...but it didnt work

?
after hitting "build" it states
your build has been queued.The
build id is
9b42b141e21a35c4007c250f45ab2039
continue to the build sever
view the current build output
when i hit either option i get "HTTP ERROR 404.
can anyone else see my build id and if so can you download it and link it to me via PM.
or what can i do to get my image

[Q] How to Install bypass-pie.zip in Nexus 4

I want to install pypass-pie.zip into my nexus 4 to bypass PIE in android L.
I search it alot but i cant find how to install that zip file.
http://forum.xda-developers.com/google-nexus-5/development/fix-bypassing-pie-security-check-t2797731
this link can help you to get knowledge about that file,
download link is provided in that link, but no one mention that how to install that zip file.

badboy00000017 said:
I want to install pypass-pie.zip into my nexus 4 to bypass PIE in android L.
I search it alot but i cant find how to install that zip file.
http://forum.xda-developers.com/google-nexus-5/development/fix-bypassing-pie-security-check-t2797731
this link can help you to get knowledge about that file,
download link is provided in that link, but no one mention that how to install that zip file.
Click to expand...
Click to collapse
you need to use a custom recovery like cwm or twrp

that's a flashable zip you need a custom recovery to flash it, search on Google CWM for Nexus 4

1. root ur device
2. install busy box
3.install rashr app
4.download .img file of ur custom recovery (google it)
5.flash it via rashr app(keep ur internet connection on)
6. then flash your .zip file via the custom recovery
i did the same for error: pie (reaver -bcmon) chutiyapa tha
#Harshal_D_Heart_Hacker

confused between adb,mtkdroid tool, flashtool?

lenovo A319
i am still in the research phase before rooting so,
Now i figured out three ways to install a custom room
1- adb: unlock boatloader ,flash custom recovery , and using it to install a custom rom .zip file
i like this method , neat easy , i understand it and i have needed files
2-mtkdroid tool:
it needs files have extension which is in existed inside the custom rom .zip file, and also want md5 file which is not compatible with my lenovo anyways
3-flash tool: same thing need files i have no idea about, and doesnt exist in the custom rom .zip file
i made a scatter file from my stock phone using mtkdroid -which i have no idea what is that file-
are mtkdroid and flashtool used together???and if so then why all the headache while using the adb solve the whole thing in couple of lines?

[Guide] [SC8830/SC7731/SC9830] Custom Recoveries Porting guide for Spreadtrum phones.

Code:
[CENTER][COLOR="Red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research before asking help and reporting bugs and please read the entire OP.
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.[/CENTER]
All suggestions and helps are welcome here so please help me in improving this thread by suggesting your ideas.
This guide will work for any SPRD phone (any SPRD chip) from Old versions of android to latest Oreo but recoveries that I provided in this thread will work for devices from KitKat to Marshmallow no guarantees for older or newer versions.
Buckup! Backup! Backup!​
Before modifying system it's highly recommended to have full dump of your device. So don't forget to take backup.
It's simple to get custom recovery for rooted users as they can directly backup, modify and flash recovery or boot images on the go with the help of root. But non-rooted users need to do some extra which will be explained later. Follow the below steps:
=>Download and setup AIK (Android Image Kitchen)
=>Grab your stock_recovery.img
For rooted users​Install Flashify, Rashr, Partitions Backup or like apps (available on play store for free) and backup the stock recovery. If you are using Flashify to backup you have to rename the backed up image with .img extention
For non-rooted users​Download your stock firmware which will be in .pac extension extract it using this guide and copy the recovery.img
=>Now download custom recovery (for downloads see 2nd post)
=>Port recovery
For PC version of AIK​
• Extract the AIK on desktop in a folder (extracting inside other folder(s) is not recommended)
• Place stock_recovery.img (use the name recovery.img only I added stock to refer the image) in earlier extracted folder
• Now double click on 'unpacking.bat'
• Now you'll see two folders 'ramdisk (mostly executables)' and 'split-img (kernel to boot recovery) rename those folders like this 'ramdisk.s' and 'split_img.s' (renaming is used to avoid copying/moving needed files)
• Now delete the earlier pasted stock_recovery.img and paste custom_recovery.img (rename it to recovery.img)
• Unpack it just like stock_recovery
• Delete the split-img and rename the 'split_img.s' to split_img
• Open recovery.fstab from /ramdisk.s/etc (stock recovery's fstab) and /ramdisk/etc (custom recovery's fstab) using Notepad++ or with your favorite note editor. In case of TWRP recovery this file will be named as twrp.fstab if there is recovery. fstab you can ignore it.
• Edit the partition names and mount points in custom recovery with your stock recovery's fstab. But in most cases the mount points will be shown like this 'mmclbk0p17 for system partition' in that case you need to change custom recovery.fstab with the mount points of your device, to find out mount points of partitions install Diskinfo from play store and enable all options in it which will show complete information regarding each and every partition on your device
• At last double click on 'repackimg.bat' now you'll see 'image-new.img' which is ported custom_recovery.img for your device
• The final step is flashing the recovery. It's easy for rooted users simply use Flashify app to flash. For non-Root users you need to flash it over fastboot mode for this look at this thread.
For mobile version of AIK​
You can also port the recovery on-the-go using AIK-Mobile unfortunately to use this needs your device must be rooted with BusyBox (Stephen (stericson) is recommended) installed.
It's a flashable zip but you can extract the zip and place the files manually. Follow below steps for setup:
• Extract the AIK-Mobile.zip
• Paste the AIK-Mobile folder under data/local of extracted zip to /data/local
• Paste files under /bin of extracted zip to /data/local/AIK-Mobile/bin
• Make sure all files including folders are having these permissions "-rwrx-xr-x-".
For placing files, changing permissions and executing scripts 'Explorer' by speed software is recommended.
For porting follow above steps (steps in PC version of AIK) the only difference here is .bat files of PC version will be as .sh in mobile version which are to be executed as root for unpacking and repackaging images.
Note:Follow the instructions properly, don't quote entire OP while asking for help. Due to some touch related drivers missing in kernel of recovery in some devices touch recovery won't work in that case please use Non-Touch recovery. In lollipop or later versions don't flash <3.x.x versions which may result in SD card mounting issues and even flashing errors. First test the recovery that you ported by flash a simple mode (I prefer AIK-Mobile since it doesn't modify the system partition hence there is not chance of bootloop. Also see whether wipe options works properly or not in some devices wiping (even cache) takes ~10m in that case goto settings check the option "use rm -rf instead of formatting".
Hit thanks button instead of posting thanks it'll boost me to create more threads like this.
Credits:
Advan S4P [Official] (fb group), SuDroid Tech (fb group), @@ki , @Jitheshwar (it's me), and some aliens from other universe.​
Created: 27-09-2017
Last Updated: 27-09-2017

Custom recovery downloads
1) TWRP recovery images
2.7.0-0
2.8.5-0
2.8.5-0
3.0.0-0
3.0.2-0
3.0.2-0
3.0.2-0
3.1.1-0
2)Cyanogen recovery (for lollipop)
3)Cyanogen recovery (for kikat)
4)MIUI recovery
5)Ultra CWM
6)Temporary CWM (only for KitKat and older
7)Temporary Philz (only for KitKat and older)
Temporary recoveries provided here are not for porting. You can flash those zips directly from you stock recovery these recoveries will have basic functions like flashing ROMs, Wiping (in some devices it'll take too long to wipe so just use factory reset option of stock recovery and then flash this recovery finally the ROM. Back up option of recovery might not be fully functional. Scrolling is glitchy but it'll work when you press button. These are more for users who are unable get working recovery

Reserved for FAQ.

Do you know how to port boot to help twrp recovery mode boot up ? Please guide me.
Boot Secure & twrp

Jitheshwar said:
Click to expand...
Click to collapse
I have fpt x50 , vn phone , which runs android 7.0 with sc7731c
Will this guide work ??

Jitheshwar said:
..
Click to expand...
Click to collapse
Sir...
you wrote that delete only split_img.s.....
but not ramdisk.s.......
Is there any problem will arise when repacking with ramdisk.s with ramdisk and split_img of custom recovery?

HemanthJabalpuri said:
Sir...
you wrote that delete only split_img.s.....
but not ramdisk.s.......
Is there any problem will arise when repacking with ramdisk.s with ramdisk and split_img of custom recovery?
Click to expand...
Click to collapse
Read again carefully you have to pack custom recoveries ramdisk with stock split_img and reversing the process will mess up the recovery and then you have to flash the stock recovery. So read the guide carefully step-by-step and follow the process exactly unless you know different working method.

unknown said:
I have fpt x50 , vn phone , which runs android 7.0 with sc7731c
Will this guide work ??
Click to expand...
Click to collapse
Give it a try it may work. But none of the recoveries that are provided here will work for your device, you need to find Android 7.0 and later recoveries which will be compatible with your chipset model.

kaew158 said:
Do you know how to port boot to help twrp recovery mode boot up ? Please guide me.
Boot Secure & twrp
Click to expand...
Click to collapse
TWRP has nothing to do with boot.img. If you are not able to boot to recovery try different key combination. Is you messed up recovery too then flash it via fastboot and then flash the stock Rom.

Jitheshwar said:
Click to expand...
Click to collapse
Sir finally the process is to pack
⇛split_img of stock recovery ......
⇛ramdisk of custom recovery you listed by replacing recovery.fstab file
Some doubt are ... from where the recoveries are taken sir?
another one is can i port a custom recovery made for similar device to my device by using these steps?
Thanks for supporting spreadtrum devices....

HemanthJabalpuri said:
Sir finally the process is to pack
⇛ramdisk of recovery you listed by replacing recovery.fstab file
⇛spit_img of stock recovery right......
Some doubt are ... from where the recoveries are taken sir?
another one is can i port a custom recovery made for similar device to my device by using these steps?
Thanks for supporting spreadtrum devices....
Click to expand...
Click to collapse
Kindly go through the entire post carefully, I believe I provided sufficient info that even a newbie can port.

Jitheshwar said:
Kindly go through the entire post carefully, I believe I provided sufficient info that even a newbie can port.
Click to expand...
Click to collapse
Sir I read entire post...
But there is no line that states to delete ramdisk of stock recovery....
Check and add that line sir....
Also process of installing AIK for Mobile changed...
We directly install and use the AIK as all other apps on playstore

HemanthJabalpuri said:
Sir I read entire post...
But there is no line that states to delete ramdisk of stock recovery....
Check and add that line sir....
Also process of installing AIK for Mobile changed...
We directly install and use the AIK as all other apps on playstore
Click to expand...
Click to collapse
I clearly stated all the steps in an easy and simple way. My kind request to you to read the post again. And one more thing if you want to use apk version use it I don't have any issues but don't ask me if anything goes wrong.

i ported twrp 3.2.1 to sc8830 sucessfully but touch is not working , can you help?
where can i find non-touch recovery
I'm using android 5.1

What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.

denmasgie said:
What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.
Click to expand...
Click to collapse
This is just some copy&paste guide thath will not work on most bootloader locked spreadtrum OEM phones

Please fix the twrp links!!!

@Vortex said:
This is just some copy&paste guide thath will not work on most bootloader locked spreadtrum OEM phones
Click to expand...
Click to collapse
No custom recovery will work on bootloader locked devices...

denmasgie said:
What is specification kernel architecture in this tutorial?. I have HH Advan S50 same with the name of chipset version.I still doubt fo following your tutorial.
Click to expand...
Click to collapse
Kernel architecture is ARM.

[ROOT+TWRP] Pre rooted boot.img and custom TWRP and Philz for WIKO JERRY

This is my first post-after spending hours researching and drinking a million cups of coffee I managed to
create a pre rooted boot.img file for my wiko Jerry. I also modified a Philz recovery image and a TWRP with otg mouse support
(I cannot use hex editor to enable touchscreen- so it will have to do).
Simply rename to recovery.img and boot.img (choose between philz and twrp) and flash with SP flashtool.
These can be flashed separately or together whilst maintaining the existing system.img or as part of a new flash with a new system.img.
It is important to install superSU right after the recovery flash- this is best done via philz or TWRP
(save the apk to your SD card either before or after the flashing) Then choose the install option from the new custom recovery.
The app will appear on your list- do not check the root with kingo or root-checker before you install Super SU or it will say the phone isn't rooted.
Super SU will giver permissions to the adb shell (kingo) or rootchecker and then these two methods can verify the root properly !!!!!!!!
Here are the files-
Scatter file MT6580- https://drive.google.com/open?id=1GXYt925OetnJnRhHgcscJcW51sI56Atf
PHILZ recovery for wiko Jerry- https://drive.google.com/open?id=1KC9hMhCeoNIEZcvTQDNdsDMCazd0JCiP
TWRP with OTG mouse support- https://drive.google.com/open?id=1t9uBQ39C3H-_6VUGaNuSd7tz5x4t7H5V
Pre rooted boot.img- https://drive.google.com/open?id=1JYCo9Z_57Rh39sLNEHD_0X1goiuJPDOI
Any further questions please PM me or reply to this thread.
Thank-you,
Rumble_Fish

Hey Rumble_Fish,
This is my very first post on this forum (although I've lurked for a while) and I'm glad I've found your thread. I've been pulling my hair out trying to root my WIKO Jerry and so far I've been unsuccessful. Unfortunately the links you helpfully provided are dead so I'd very much appreciate a re-up!
Would you be willing to help me out with the rooting process? I've tried every method I could find but to no avail. I'm completely new to rooting so I might have made some noobish mistakes.
What I've done/tried so far:
- Unlocked bootloader and enabled USB Debugging in the phone's developer options
- Installed ADB/Fastboot drivers (although my device isn't detected in fastboot mode)
- Run every 1 click root software solution (including APK's) under the sun (unsuccessfully)
- Install MTKdroidTools (which couldn't create a scatter file)
- Install Android USB drivers (although I'm unable to install Android Bootloader Interface)
Why do I want to root this phone so badly? I want to be able to recover my files (mostly photos) after a factory reset using Diskdigger and for that I need root access.
I hope I haven't left anything out and I hope you're willing to help a newbie out! Thanks a million in advance!
Kind regards,

can you repost the link because the links are dead