USB Connectivity issue on S2 HD SHV-E120L - General Questions and Answers

Dear experts, i have an issue of USB connectivity to PC. PC cannot detact USB internal storage of device but mobile start charging when pluged in to Usb port. I tried ever possible thing i now. And also not connecting KIES and Odien via USB.
Is there any solution. Plz help.
Thanks
Sent from my SHV-E120L using XDA Free mobile app

Is USB Debugging enabled? Connect your phone and wait for the beeps, making sure your phone is unlocked. Now pull down the status bar and click USB settings and choose file transfer mode. You will hear the normal disconnect and reconnect beeps, you should now be able to browse your files.

Farhan45712 said:
Dear experts, i have an issue of USB connectivity to PC. PC cannot detact USB internal storage of device but mobile start charging when pluged in to Usb port. I tried ever possible thing i now. And also not connecting KIES and Odien via USB.
Is there any solution. Plz help.
Thanks
Sent from my SHV-E120L using XDA Free mobile app
Click to expand...
Click to collapse
Since you posted here, and please keep to one thread: http://forum.xda-developers.com/gen...l-rom-samsung-shv-e120l-t3459739/post68639639

Related

Phone detection by PC

I have completely lost connection with my computer. It does not detect the phone at all during standard usb to phone connection nor does odin recognize a phone being hooked up. Any suggestions? Thanks in advance for your help.
drbveb88 said:
I have completely lost connection with my computer. It does not detect the phone at all during standard usb to phone connection nor does odin recognize a phone being hooked up. Any suggestions? Thanks in advance for your help.
Click to expand...
Click to collapse
Try deleting the Samsung drivers on your computer and let Windows find them for you or switch usb ports or check out your Device manager and see if there are any problems in there... Assuming that you are running windows? Hope this helps...:good:
Options
1.try another computer
2. Dont use a usb hub
3.try a different usb port... stay a way from usb 3.0
4. It might be a bad usb cable
5. Uninstall the driver then reinstall them(install if youb dont have it)
Sent from my SGH-I535 using xda premium
Thanks for the advice guys. I tried a different cable, USB and deleting the drivers. It doesn't detect my phone at all after this.
I'm pretty sure it is an issue with my phone. I plugged my wife's s3 in and instant detection. I'm gonna call vzw and have a replacement sent.
Thanks again for the help.
Sent from my SCH-I535 using xda premium
Be sure debugging is off, or the drivers will not automatically download. Switch back on when you start using Odin
Sent from my SCH-I535 using xda premium

My pc won't recognize my note 10.1

My pc doesn't detect my moet 10.1. With my s3 and tab 10.1 i have No problems. WHen i connect my note 10.1 to usb, the tab makes a connection sound and charges, but he pc doesnt recognise it. Not kies, not my computer, nothing.
What am i doing wrong do i miss Here something?
Thank you
Sent from my GT-P7500 using XDA Premium HD app
I am having difficulties in connecting mine too. I was getting 'hardware ID missing' errors on Windows 7. Latest Kies installed.
Anyone? Is it broken?
Sent from my GT-P7500 using XDA Premium HD app
Have you tried another computer?
Sent from my SPH-D710 using xda app-developers app
i have the exact problem like u. when i connect my note 10.1 to my pc via usb, my pc wont detect my note storage even though i set it at MTP. the only thing that come out is scanner and camera wizard. please someone help
If I remember correctly when I connected my GNote10 to my laptop all I could see was the sdcard not the external card. Well it could seevthe external sdcard but not what was on it. I put it down to the fact I run Linux and the drivers for the GNote10 may be different. However now I use WiFi File Explorer Pro and Bluetooth for transfering files as it seems easier for me.
There is a app to fix this on SSamsung apps store search for kies it will be there
huibn said:
My pc doesn't detect my moet 10.1. With my s3 and tab 10.1 i have No problems. WHen i connect my note 10.1 to usb, the tab makes a connection sound and charges, but he pc doesnt recognise it. Not kies, not my computer, nothing.
What am i doing wrong do i miss Here something?
Thank you
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
neilgoco said:
I am having difficulties in connecting mine too. I was getting 'hardware ID missing' errors on Windows 7. Latest Kies installed.
Click to expand...
Click to collapse
I have the exact same issues as you guys. I was worried that I broke my tablet!
erica_renee said:
There is a app to fix this on SSamsung apps store search for kies it will be there
Click to expand...
Click to collapse
Erica, unfortunately, this app does not install. If you're talking about Kies Saver WiFi.
Try connecting it to another Windows computer to see if it is detected to rule out whether or not it is a specific computer's issue or your tablet.
If it's just that computer then only thing I can think of is if you go to the Device Manager in windows and look under the "Universal Serial Bus controllers" Host controllers and see if any have an exclamation mark.
From there you can try uninstalling that device and then either reconnect or reboot your computer and reconnect and see if it now detects it.
Could try this program on your computer to remove usb entries.search google for usbdview program for your pc.it will show all conmected usb devices remove old android conmections
Good luck this helped me before
erica_renee said:
Could try this program on your computer to remove usb entries.search google for usbdview program for your pc.it will show all conmected usb devices remove old android conmections
Good luck this helped me before
Click to expand...
Click to collapse
I solved the issue like THIS:
Downloaded KIES
ran " connectionproblems" function of KIES (drivers will be newly installed)
Restart PC
Connect
And , voila, MTP works flawless ...........
FIXED
I pluged it in like you had and just got the un-ending "Connecting" in Kies. It showed the device ID (GT-N8013) in the connected device tab however it would never fully connect.
So what I did was while it was trying to connect in Kies I changed the connection type in the Note from MTP (Media device) to PTP (Camera). I got a few error messages in Kies saying that it can't connect to the device because the device was in the wrong mode. After I cleared those error messages and Kies stopped trying to connect. I than set the USB PC connection back to MTP and let Kies do its thing and no problemo there it was.
Hope this helps some of you! Have fun! Also the kick in the pants is that there is no firmware update available still stuck at 4.1.2. I was hoping 4.2 would be available.
same problem as OP
I have the same problem as OP, my PC just doesn't recognize that a device is plugged in. The Samsung note 10.1 beeps and charges but that's it, my PC is non the wiser to anything changing at all.
I'm running Windows 7 64bit and I've tried it on my brothers PC, same OS, and my dads which is 32bit. re-installed windows, fully updated Samsung and windows, Kies just says "plug in a device"
USBDeview doesn't recognize anything.
Nothing in device manager.
I've contacted Samsung after searching high and low on Google for an answer and they diagnosed it as faulty.
Repair center says it's working fine and sent it me back.
There must be something I'm missing on the tablet, could it be a faulty USB cable? I have really run out of options.
because its rooted
wont work because its rooted i even tryed voodoo root keeper and samsung wont let me update becasue its rooted .. kinda stuck. cant even connect computer to install custom rom
ryan1411 said:
I have the same problem as OP, my PC just doesn't recognize that a device is plugged in. The Samsung note 10.1 beeps and charges but that's it, my PC is non the wiser to anything changing at all.
I'm running Windows 7 64bit and I've tried it on my brothers PC, same OS, and my dads which is 32bit. re-installed windows, fully updated Samsung and windows, Kies just says "plug in a device"
USBDeview doesn't recognize anything.
Nothing in device manager.
I've contacted Samsung after searching high and low on Google for an answer and they diagnosed it as faulty.
Repair center says it's working fine and sent it me back.
There must be something I'm missing on the tablet, could it be a faulty USB cable? I have really run out of options.
Click to expand...
Click to collapse
ryan1411 said:
There must be something I'm missing on the tablet, could it be a faulty USB cable? I have really run out of options.
Click to expand...
Click to collapse
I don't know if this is the case with you, but I experience connection problems very often, in particular with OTG. Connection seems to be reliable immediately after reboot but after a (short? longer?) while it stops and won't work anymore.
My guess is that a driver is not correctly reset when the tablet resumes from sleep.
It might be a problem introduced with the latest OTA.
Same here bro.. I tested to another PC but still not recognize.. maybe from the note?
Please everyone.. help help help
Sent from my GT-N8000 using xda app-developers app
Fixed
adyet26 said:
Same here bro.. I tested to another PC but still not recognize.. maybe from the note?
Please everyone.. help help help
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
Fixed it with a £2 USB cable off eBay. If you have nothing but the tablet charging try a new cable. Worked for me after sending it to Samsung for repairs twice.
ryan1411 said:
Fixed it with a £2 USB cable off eBay. If you have nothing but the tablet charging try a new cable. Worked for me after sending it to Samsung for repairs twice.
Click to expand...
Click to collapse
So i just go to samsung center? Then buy new cable?
Sent from my GT-N8000 using xda app-developers app
---------- Post added at 05:18 AM ---------- Previous post was at 05:07 AM ----------
Ok if something fault from usb cable, why when i Plug with charger is working fine.. but when i plug into usb port on my pc still not recognized..
Sent from my GT-N8000 using xda app-developers app
Try to turn on USB Debugging in Developer Setting. I'm using N8013 and that method works for me
My Note 10.1 (2014) wasn't being recognized in My Computer by the laptop running Win7, so I found the tablet in the Device Manager, double-clicked on it there, and downloaded the drivers. Loaded up flawlessly after that.

my GT -P6200 is no longer recognized by any pc via usb

Hello everybody
it's been a month that my tablet is no longer recognized by the PC when connected via USB cable, MTP connection no longer appears when I plug in the cable.
Before I was connected without any problem while it was already Rooted and running ICS but everything changed instantly i don't know what
The cable is not damaged cause with an other tablet it worked
Please help me
Can anybody help me please ?!!!
Did you disable MTP at startup? Most people commit this mistake.
Graffiti Exploit said:
Did you disable MTP at startup? Most people commit this mistake.
Click to expand...
Click to collapse
how? disable MTP at startup ??
MTP is enabled ( settings--->Stockage--->connection USB PC -->enabled
jkschola said:
how? disable MTP at startup ??
MTP is enabled ( settings--->Stockage--->connection USB PC -->enabled
Click to expand...
Click to collapse
I didn't see this option in Settings of my GT-P6200, which Tablet you're talking about?
jkschola said:
Hello everybody
it's been a month that my tablet is no longer recognized by the PC when connected via USB cable, MTP connection no longer appears when I plug in the cable.
Before I was connected without any problem while it was already Rooted and running ICS but everything changed instantly i don't know what
The cable is not damaged cause with an other tablet it worked
Please help me
Click to expand...
Click to collapse
Have u install USB Driver for P6200?
Sent from my GT-P6200 using XDA Premium HD app

USB connection Problem

Hey guys, I have a usb connection problem with my galaxy r. I haven't found a similar thread in this forum here yet so I hope you guys can help me with that.
If I plug my phone to the PC (Windows 7 x64) I hear the typical response tone that it is connected. Just a second after that the tone for successful disconnection comes up and nothing except for charging happens. Then I unplug the cable and put it back again and all the sudden it has been recognized. I can normally go to internal and external sd card. Sometimes copying files from the phone to PC fail too. I have no idea for this weird behavior.
My phone is on stock 4.0.4 rooted and on 3.1.10 titanium.s-rc-2 kernel
USB debugging is on
I already tried to clean the micro usb port with a tutorial of telmosousa but it didn't work for me so maybe it could be a software problem but I have no idea.
clown85 said:
Hey guys, I have a usb connection problem with my galaxy r. I haven't found a similar thread in this forum here yet so I hope you guys can help me with that.
If I plug my phone to the PC (Windows 7 x64) I hear the typical response tone that it is connected. Just a second after that the tone for successful disconnection comes up and nothing except for charging happens. Then I unplug the cable and put it back again and all the sudden it has been recognized. I can normally go to internal and external sd card. Sometimes copying files from the phone to PC fail too. I have no idea for this weird behavior.
My phone is on stock 4.0.4 rooted and on 3.1.10 titanium.s-rc-2 kernel
USB debugging is on
I already tried to clean the micro usb port with a tutorial of telmosousa but it didn't work for me so maybe it could be a software problem but I have no idea.
Click to expand...
Click to collapse
First this belong to Q/A thread.
Now untick the Usb debugging then try again. It might b Usb port damage. Try it.
Sent from my GT-I9103 using Tapatalk 2
Also check if KIES software is compatible x64 windows7..
And hav u tried using diff usb ports to plug in ur phone?
Sent from my GT-I9103 using XDA Premium HD app
sudhindrakv said:
Also check if KIES software is compatible x64 windows7..
And hav u tried using diff usb ports to plug in ur phone?
Sent from my GT-I9103 using XDA Premium HD app
Click to expand...
Click to collapse
it is compatible with 64bit windows 8 also.
I suggest you take a backup of your current rom using CWM, Flash any gingerbread stock rom and check if it problem persists. If it does then you have a hardware issue, if not, then it's definitely a software thing. Also, do check your drivers installed in the PC as they do play a role in communicating with your phone. I had a similar issue once and it turned out that the rom was absolutely fine and my drivers were having issues. I sorted it out and my problem was solved
Happens to me when I connect the phone with capdase (ignore the spelling ) case on. Try connecting to the PC without case.
Sent from my GT-I9103 using Tapatalk 2

[Q] Usb Not Recognized

Hi I have a galaxy fit running on creed's rom 4.0 and i now want to get back to the stock rom.
When i connect my usb cable to pc it just start charging and i cant access sd card and when im in download mode it doesnt show up in the id:com box. please help
Thanks in Advance.
Your PC USB port has malfunctioned. Do it on another PC or laptop(recommended).
Galaxy_Rohit said:
Your PC USB port has malfunctioned. Do it on another PC or laptop(recommended).
Click to expand...
Click to collapse
Tried that too but i had no luck in that!
Install Samsung Mobile Drivers on PC.
Galaxy_Rohit said:
Install Samsung Mobile Drivers on PC.
Click to expand...
Click to collapse
They are installed already. Is there any way of configuring usb settings in the phone except usb debugging?

Categories

Resources