Root BV6000 - Miscellaneous Android Development

Hello. please can anyone help me root BlackView BV 6000? I tried all the tutorials on web and all roms from needrom.
None worked for me.
I tried this tutorial too
http://www.gizbeat.com/10576/blackview-bv6000-twrp-and-root-mt6755-helio-p10-guide/
But after i flash, when i enter TWRP, touchscreen is not respondind.
So is there a way to root this phone ? and install cwm or twrp?

You are further than me. I used SP Flash Tool and got the green check mark. But with I power on the device by holding Power+VolUp ... then release Power button when I see "Blackview" and keep holding VolUp ... I just get an Android with a red triangle and a message saying "no command". I never get into TWRP even though SP Flash Tool says it was successful. This is so frustrating! How are you getting into TWRP ??

Hello. For all who want twrp on Bv6000 contact me on my email. i will help you. [email protected]

Related

Stuck in bootloop

Hi all Experts,
I am new to these flashings, I am really desperate need of help on my XOLO Q3000.
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Any help would be greatly appreciated.
Thanks
alfamine
Does it shows boot logo of xolo?

[Completed] BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios

[Completed] Lenovo s860 can't be flashed completely (always stuck @ 25%)

​pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!

Oppo r7 plus revocery

Guys i need your expert opinion. I tried to flash oppo r7 plus f with Lineage OS but to do that i tried to root and use TWRP but i never could access to recovery tried all method fastboot button combination but nothing worked in fastboot it always asked waiting for device. again i unroot my device now i cant even access official recovery. oppo logo keep blinking when i use Volum down+power button then boot normally but not entering in recovery. kindly help with this

sp flash BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device .

Categories

Resources