i have a viglen connect tablet 9 first i had a problem with touch not working after upgrade to windows 10
but now i have a hard bricked device , i made some changes in bios setting when i did save ans restart tablet wont bootup
Can anyone help to solve this issue ,, need to reset bios or flash another one .
its on intel based viglen tessco tablet 9
waiting for ur reply
Related
greetings, excuse my poor english please.
I'm using an Arnova 7 G1 tablet with the last official firmware (jul. 2011)
When flashing it with rooted YAR 0.28 rom using RKAndroidBatchUpgrade.exe the tablet screen showed fuzzy pixels and system freezes.
I' power it off, but when i power it on, there was no life sign : no boot , no ARNOVA logo , and no connection with XP.
I tried the RESET button , but no chance !!!.
Did i killed my tablet, and is there any way to recover it -any chance to be detected by XP to reflash. Is there any way to open it and short some circuit for some hot reset ????.
Please Help
thanks in advance.
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Hello ,
I (think) i bricked my Rk3066 tablet.
How can i fix it ?
-My pc cant find it (in past it could , i had/have the drivers )
-I cant turn it on
-Cant charge it , if i try to charge it , tablet is like takes fire and is very hot.
there is any solution to fix it ( i want to see it with my pc so i cant fix it with Rktool ) ?
or i must throw it from window ?
Thanks in adavance.
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
firststepsandroid said:
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
Click to expand...
Click to collapse
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
sd_shadow said:
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
Click to expand...
Click to collapse
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
firststepsandroid said:
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
Click to expand...
Click to collapse
Great, thanks for the update.
Solution ???
Please post how you fix this problem.I have the same issue and maybe others are looking for the fix too.
Thank you
hey guys
need some help my wifes sister she update the tablet to the latest version V4.7.1.0 , and suddenly the touch screen won't work, I did a factory reset from the recovery and the touch worked for an hour then stopped again I did another factory reset and the touch stopped completely, how do I fix this problem ?
I tried so much I would liek to know if I can down grade to V4.6.1.0
here are the things I tried :
Downloaded V4.7.1.0 and 4.6.1.0 put them into sd card and tried to update via SD Dwonload in recovery but that didn't help
I tried to ADB Sideload but every time I type adb devices it will not detect the tablet
can anyone help me on this please this tablet has been with us for a few month only
this is the firmware download ;https://www.asus.com/support/Download/51/1/0/8/ugilOGr58KvmEQZj/32/