Hi all,
My MotoG had a bath in water, and as a result of it, its touchscreen is not functioning.
I am getting incoming calls (though, i couldn't attend them :crying: ), notifications sounds, popups in display and almost everything except touchscreen functionality. As a result i am not able to access my phone.
I have approached Moto Care, and the budget they have quoted is almost same as the price of he new phone. So i though why don't I use this phone by controlling it using PC using the methods mentioned in various post in this forum. But i am facing some problems here.
1) My phone is locked with a PIN. Moto G not letting to detect PC unless device is unlocked by entering PIN.
2) I have unlocked the boot-loader, rooted my phone. But, when i am trying to run ADB shell my phone is not getting detected. I am pretty sure USB debugging is enabled.
3) I have tried to get into recovery, and run ADB; but again phone is not detected. ( Fastboot commands are working though )
4) I haven't done the factory reset. Since my phone is running stock android i doubt it will make USB debugging option disabled after reset(that's what i understood, correct me if i am wrong).
5) If USB debugging is not activated at worst case, i am confused about selecting and flashing custom ROMs available for motoG in which developer Mode and USB debugging are enabled by default.
So can you guys help me to make my MotoG get in to action. also guide me through selecting and flashing a custom ROM having Developer Mode and USB debugging enabled by default via PC.
:good::good:
Get a USB otg cable, and attach a pc usb mouse (or wireless mouse dongle) . It should work (I've tried it before and it works)
any luck?
My phone's screen is completely black, but i think the touchscreen works. Can someone give me a screenshot of the pop-up that appears when you connect Android KK 4.4.4 to PC ? Thanks.
Or if someone know another way to recover data? I don't think I have USB debugging ON.. How do I check, adb devices?
Update: no devices in adb.
Device?
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
TerrorToetje said:
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
Click to expand...
Click to collapse
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
d3nni said:
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
Click to expand...
Click to collapse
I ordered a new USB port board, will let you know the results!
Any results after changing the usb port?
Did fast charge still work for you? And this replacing the USB port work? I think this is related to a broken USB ic. For me replacing the USB port didn't help
Sometimes it's a bad charging port and / or liquid damage to the charging port.
If your home button clicks but does not work it could be liquid damage near the home button. Same goes for power and volume buttons.
I just fixed a S6 edge plus yesterday power button not working, liquid damage all around power button area, fixed burnt components and corroded pins.
Hi to everyone,
Yesterday I have broken my phone screen and touch screen and since then I have tried searching for methods to recover my datas but i only came across with a tool for windows which i can't use since i have a mac.
This is the situation:
I don't have a pin, a password or something else
I can boot the phone
I can access my custom recovery which is TWRP v.2.8.5.1
I have enabled usb debugging in the developer options
I have adb and fastboot installed on my mac and adb devices finds my phone if plugged to my mac
Is there a way to recover my data from the oneplus?
Thank you
Marco
Hi everyone, my OP6 recently fell into a pool for like 10 seconds and suffered some water damage. Ever since, it's been stuck in a boootloop. I can connect it to my PC and it starts charging but doesn't show up in the "my devices" page of windows. USB debugging hadn't been turned on before the phone got damaged and my phone wasn't rooted. Any help to recover my data would be much appreciated since there's pictures and chats that mean a lot to me in there.
You can try to boot TWRP and make a backup of your /data on an external device maybe?