Code:
[I]First Off, I am not responsible for anything that goes wrong with your device.
I Found this on 4pda, so all credits go to them as they have worked hard to bring this to you. I'm just bringing this over to XDA for you guys to use[/I]
Right, so as the title says, here's TWRP 3.0.2 For the GT-S7270 variant of this device.
Prerequisites:
A custom recovery already installed, I suggest Philz touch (Since this is a recovery flashable zip), XDA thread here
The Recovery, download here
Install Instructions:
Download the zip file and copy it to your SD card.
Reboot into recovery mode (Philz Touch in this case)
Go to install, find the file and accept.
Restart recovery
Ready!
Hit thanks if I helped
Can you make recovery for S7272?
Any original link?
Related
CWM TOUCH RECOVERY FOR SAMSUNG GALAXY MEGA 5.8(GT-I9152) By Sarath280
Installation:-
1.Go to Download Mode By Pressing (Volume Down +Home +Power) And Connect Your Phone To PC.
2.Launch Odin v3.07.
3.Browse recovery.tar.md5 as PDA
4.Hit Start and Wait.
5.After Installation Go To CWM By Pressing (Volume Up +Home +Power).
6.Make Sure That In Odin the Auto Reboot And F.Reset Time Checkboxes Are Selected, Uncheck The Re-Partition And Other Option.
Rooting:-
1.Download UPDATE-SuperSU-v1.34.zip from the download section.
2.Then go to cwm recovery.
3.Then choose install zip and then install UPDATE-SuperSU-v1.34.zip
4.Make sure that you have a cwm backup before doing roooting.
Download Link:-
Odin v3.07- https://www.dropbox.com/s/gs88vpsbsx2po9p/Odin v3.07.rar
CWM TOUCH RECOVERY - http://d-h.st/WhV
STOCK RECOVERY - http://d-h.st/EKW
UPDATE-SuperSU-v1.34.zip- http://download.chainfire.eu/333/SuperSU/UPDATE-SuperSU-v1.34.zip
I DO NOT TAKE ANY RESPONSIBILITY WHAT HAPPENS TO UR PHONE.
HIT THANKS IF IT WRKS.
Thank you ...
But it doesn't work with I9200 ..
Please help me out , I need root for my device
This is boot.img from min F.W
http://www.mediafire.com/view/?rpkfcu9rigs1m45
Send it from Gigantic Galaxy MEGA
sarath280,
I have the galaxy mega 6.3 i9200 and am already rooted. I know nothing is guaranteed but I want to know, generally speaking, should the cwm recovery in your post work for my phone or are they specifically built for specific phones and will only work on the phone it was custom made for?
curgervending said:
sarath280,
I have the galaxy mega 6.3 i9200 and am already rooted. I know nothing is guaranteed but I want to know, generally speaking, should the cwm recovery in your post work for my phone or are they specifically built for specific phones and will only work on the phone it was custom made for?
Click to expand...
Click to collapse
How did you do root on the mega 6.3?
Can i just Root the phone using below procedure only ?
I dont want to flash through PC.
Thanks..
Sarath280 said:
Rooting:-
1.Download UPDATE-SuperSU-v1.34.zip from the download section.
2.Then go to default recovery By Pressing (Volume Up +Home +Power).
3.Then choose install zip and then install UPDATE-SuperSU-v1.34.zip
Download Link:-
UPDATE-SuperSU-v1.34.zip- http://download.chainfire.eu/333/SuperSU/UPDATE-SuperSU-v1.34.zip
Click to expand...
Click to collapse
I tried flashing CWM through Odin, its not working.
http://s23.postimg.org/53as4lcgb/CWM.jpg
Thats how recovery looks with provided CWM.
So i flashed back to default recovery, and only tried to install UPDATE-SuperSU-v1.34.zip through default recovery.
http://s13.postimg.org/lexoh9div/IMG_20130623_WA0012.jpg
While installing it i got some errors which i could not capture.
I checked to see if phone was rooted, but its not.
http://s12.postimg.org/4rwylacpp/IMG_20130623_WA0013.jpg :crying:
CWM is not compatible i think with mega 5.8. Passed flashing odin but when I enter CWM i just cant read the screen. Its like an old defective TV look. Hope you can give us a CWM for our Mega 5.8
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
port 4.4 for 3d
DGEEEK said:
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
Click to expand...
Click to collapse
port android kitkat
Hi guys, I created ClockWorkMod v5.5.0.4 for Karbonn A16
NOTE THAT BY FLASHING CUSTOM RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH IT AT YOUR OWN RISK.
How to install CWM on Karbonn A16:
0. Make sure device is rooted!!!
1. Backup your device using any other recovery or MTKDroidTools or SPFlash Tool
2. Install Flashify or Rashr from Google Play Store (Links Below)
3. Copy the boot.img and recovery.img to your sdcard
4. Launch Flashify or Rashr
5. Flash boot.img as boot
6. Flash recovery.img as recovery
7. Done!
How to Access recovery:
Turn off your phone. Press and hold Volume Up and Power button. Select recovery and ok.
OR
You can reboot to recovery using Flashify, Rashr or Link2SD.
OR
Install terminal emulator from Google Play Store and enter the following:
$su
#reboot recovery
Download:
boot.img
recovery.img
Flashify
Rashr
Link2SD
If you liked my work feel free to hit "Thanks" button!
HI,
I want a little help from you.
I've another device- Panasonic T31, which shares same processor (MTK6572) and resolution (480*800) as this device. So, can you guide me how can i port (or build) this CWM to my Panasonic device?
Any help will be appreciated.
BB23482 said:
HI,
I want a little help from you.
I've another device- Panasonic T31, which shares same processor (MTK6572) and resolution (480*800) as this device. So, can you guide me how can i port (or build) this CWM to my Panasonic device?
Any help will be appreciated.
Click to expand...
Click to collapse
You can try MTKDroid tools.
kvsjxd said:
You can try MTKDroid tools.
Click to expand...
Click to collapse
Tried MTK droid tool, but failed. Tried magic TWRP but same result.
I was thinking to build complete cwm recovery from scratch now. Any help?
BB23482 said:
Tried MTK droid tool, but failed. Tried magic TWRP but same result.
I was thinking to build complete cwm recovery from scratch now. Any help?
Click to expand...
Click to collapse
Only if you have kernel source.
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
Hi guys, I created TWRP for Xolo Q610s
NOTE THAT BY FLASHING CUSTOM RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH IT AT YOUR OWN RISK.
How to install TWRP on Xolo Q610s:
0. Make sure device is rooted!!!
1. Backup your device using any other recovery or MTKDroidTools or SPFlash Tool
2. Install Flashify or Rashr from Google Play Store (Links Below)
3. Copy the recovery.img to your sdcard
4. Launch Flashify or Rashr
5. Flash recovery.img as recovery
6. Done!
How to Access recovery:
Turn off your phone. Press and hold Volume Up and Power button.
OR
You can reboot to recovery using Flashify, Rashr or Link2SD.
OR
Install terminal emulator from Google Play Store and enter the following:
$su
#reboot recovery
Download:
recovery.img
Flashify
Rashr
Link2SD
If you liked my work feel free to hit "Thanks" button!
good work
Any rom you found for the device?
piyushtilva said:
Any rom you found for the device?
Click to expand...
Click to collapse
I created 2-3 roms but for some reason the recovery is not allowing to flash the rom and instead throws an error
So still no developer for device except you. Can we get help from xolo one development?
piyushtilva said:
So still no developer for device except you. Can we get help from xolo one development?
Click to expand...
Click to collapse
I don't think anyone would come up with mods or roms for this device, also that I am not using this device anymore. But you can try porting mtk roms to your device. It's easy and you can find a lot of guides available on XDA or Web ?
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM