Camera mods on Jesse's Note7 Port for G930F!! - Samsung Galaxy S7 Questions and Answers

Hello all!
I have recently installed Jesse's N7 port on my G930F with Samsung ISP (camera sensor).
I noticed that other users complained about camera mods not working at all. In my case, everything works pretty well and the camera quality is also impressive! I think it is because I flashed (zeroCamera_s7_v5_exynos) mod after installing the rom. Maybe that would help!
BTW, I have a question. When I was flashing the new version 1.2 of the same rom, the installation process took only 5 seconds (it took 2 mins with the previous 1.1 version). After that, the phone did not pass S7 logo! luckily I had a backup of everything, but now I can not flash the updated version. Any help please?

Related

[Q] Baseband: Unknown

My problem is after installation of 4.2 rom i lost my radio, but only in kitkat.The original kitkat tmobile rom seems to fix that, but then again any other rom is with broken radio. CM11 is ok, but if im not wrong the cm radio is being written on different partition, than the kitkats one.Tried KK_baseband_801.zip and LG801_20A_RADIO.zip.Neither of them fixes the issue.A can live with CM11 but i am really sorry i cant have access to the UHD camera.So i guess you guys are going to tell me to downgrade .Probably that will fix it but i`ve to install Windows 7 again so im not in a hurry.I can try it in virtual box but didn't had success before that and had to temporarily install windows.Ultimately id like to interchange betwen cm11 and lightning v2 rom with the slow motion camera and the other extras.Its just too much bloatware with the tmobile version plus its checking to see if you have tethering plan, which is incompatible with unlimited data.
Thanks
Installed stock after all, since the baseband issue still exist if put something else, but i used smileys ROM then installed "autorec xda" which is capable off flashing twrp in case you need CM.The UHD cam is cool to play with , although i wish to be possible to manual focusing during video recording instead this useless thing to take a picture.What do you think.
portis said:
Installed stock after all, since the baseband issue still exist if put something else, but i used smileys ROM then installed "autorec xda" which is capable off flashing twrp in case you need CM.The UHD cam is cool to play with , although i wish to be possible to manual focusing during video recording instead this useless thing to take a picture.What do you think.
Click to expand...
Click to collapse
I agree on your comment. This should have been considered before the device got manufactured..

Ive broken my Note 2 (ROM upgrade gone wrong).

Hi Everyone,
I come to you for a bit of help. I have spent a long time trying to fix this and come for help from you guys.
So I got a little bored with standard Samsung Android on my Note 2 (GT-N7100). Having used Cyanogen before, I decided to try it on the note.
I rooted the device and installed CWM on it no problems. I then loaded CM from a micro usb.
On reboot it just gets what i'd call the "Spinning blue screen of death" where it just has the big blue circle going round until it runs out of battery. After some research I used CWM to clean out the caches etc but it still didn't appear to work. This was using the stable version for my Note 2. I then went on to try other versions and got the same issues. Alas, trying to do a restore didn't work either, as it didn't seem to have all the files.
At this point I am happy to go back to stock Android or indeed CM. I'd just like a phone that works!
My device details:
Model GT-N7100
SSN: -N7100GSMH
Network Provider Virgin UK
Any help appreciated.

Is this normal?

Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
chrismin13 said:
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
Click to expand...
Click to collapse
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
shaun298 said:
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
Click to expand...
Click to collapse
Thanks for the response!
Good idea! I was thinking of going back to stock and repeating everything. It should fix all my issues. It's too bad that I don't have a working stock backup and I will have to flash through Odin. The reason that I am not doing this is because I am afraid of making it even worse from the official status state that I have in Download Mode and my device is an n8013 under About Device. A flash back to stock through Odin would probably flash most of the system parts which would be kinda dangerous. But on the other hand that would mean that I could give it a brand new try with better luck possibly! It's not that TouchWiz ROMs don't work, it's AOSP that doesn't. I played a lot with Hyperdrive and seems like it's doing better from the lag prospective. But that's only gonna last 15 days. I am sure! So, I'll have your response in mind! Might try it out when I have some free time. Unfortunately, that will probably be Christmas.
Thanks,
Chris
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Phil789 said:
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Click to expand...
Click to collapse
I don't have any video playback issues. It's just the camcorder that doesn't work in AOSP ROMs.
Yes.My use of the word "video" should have been "video recording".
The time has come!
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
chrismin13 said:
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
Click to expand...
Click to collapse
I did it! It worked. Everything went OK but:
- Flash count is 0 and status official
- Back camera records in slow-mo
- Chromecast mirroring does not work
However:
-My device is an N8010
-I use the front camera instead
-Mirroring was not really needed
-LAG IS HISTORY!!! [emoji50] [emoji2] [emoji2] [emoji2]
I am so impressed by the performance, still doesn't best my nexus 4 with KK 4.4.4 but it's a GIGANTIC IMPROVEMENT! Veeery happy! Thank you for your support, I wouldn't be here without you!
Merry Christmas and happy holidays!
Chris.[emoji2]

Camera not working after Root and flashing ROM

Hello everybody,
today i bought a new Galaxy S7 (Exynos).
Becuase i had Resurrection Remix OS on my previous phone, a Galaxy S5, and since i loved it, i decided to install the S7 version.
So, my first step was to follow this guide to install TWRP and Root:
https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Afterwards i flashed Resurrection Remix OS Rom. But then i discovered that the camera isnt working: As soon as im opening the camera app, the screen stays black and after some seconds either "Can't connect to camera" or "Camera has stopped" is popping into my eyes. Then i tried to install LineageOS, but the result was the same.
I found something on Google to force stop the camera app and deleting cache etc - which i did, but it didnt help.
So i flashed back the Stock Firmware (G930FXXS1DQG4) and camera worked again.
I tried again to install TWRP and the ROM afterwards, but again, camera isnt working.
Can someone help me about? I totally dont want to stick to the S7 Stock Firmware.
Thanks in advance
You probably have the Sony camera sensor, which is not working on AOSP ROMs yet.
Ah ... Well, that's some explanation. Thank you
Looks like there is a solution for the Sony sensor.
Looks like there is a solution for the Sony sensor, if I have read it right. At least for Linage OS (but I haven't installed id yet).
Unfortunately I can' t post outside links here, but look for Lineage OS BUGBASH-729 in google.
Have at look at this for information and what looks like the solution on the problem.
And read through Activity - All.

SIM Unlocked G920W8, 9.0 and 10.0 ROMs no longer detect SIM.

*SOLVED: see reply*
The ROM I used before was LineageOS [10.0] and used a custom ROM with Android 9 before that. Needed to unlock my phone, and couldn't do that on Lineage, and had troubles flashing firmware with Odin, so I ended up using FrankensteinS6. The Stock kernel seems to let me input the NCK, and unlock the phone. So that's luckily finally over.
For about 4 days now I've been formatting phone and trying again and again. FrankensteinS6 works, some other 6.0/7.0 ROMs work. But LineageOS now enters a bootloop, and Pixel Experience (9.0 and 10.0) and Evolution X 10.0 don't detect the SIM. The ones that don't detect SIM also show no IMEI, which was worrying at first because I though I lost a partition.
Possibly related, the ROM of Pixel Experience Android 10.0 for G920W8 will not install because (paraphrasing) "This device is zeroflte, this file is for zerofltecan, zeroflte***, zeroflte***" claiming that my phone isn't one of those models. I got this S6 from Bell Canada, and I still have even the sticker that says it is a G920W8, not G920F. However, the Pixel Experience ROM for G920F flashes fine (sans the main problem).
I don't know the exact LineageOS ROM I used before, but I've tried all of their 10.0 releases, tried redownloading, and I get the bootloop every time. I see some info online of flashing modem firmware, but... I don't even know where to start with that. As I mentioned at the start, Odin is crapping out. I couldn't flash firmware with it, because it would reject the phone right after I started flashing. Anything I could do within TWRP would be great. I moved it back to FrankensteinS6 for my sanity, I started doing this Sunday and I'm starting to repeat steps over and over hoping that it just solves itself.
I tried to keep this straightforward, and I'm sure I did a bad job. I can extrapolate on what I have attempted. Please tell me what I have to do to get an android 10 ROM working on this old beauty again.
I do not have all the solutions. As per my tests with my SM-G920W8. I have managed to find ROMS and try them out. I have only seen Nougat 7.0 ROMS to work almost flawlessly. NOT 7.1.2, important, 7.0 only.
I have also tested some Pie and v10 ROMS like Pixel Experience. The ROMS boot nicely but since I do not use a SIM card to call as I use SIP phone numbers and require WiFi. But that left asside, I came upon serious camera issues no matter what I try. Up to now, SamStock ROM is pretty much the best Stock ROM I found but I always need to run the Magisk UNINSTALLER before re-installing the latest Magisk version..
As for Kernels, well, Anything that is oriented with Lineage OS, I've had camera issues even with Nougat v7.0. So basically, the only ROMS I found good, as of today, for now, are stock ROMS v7.0. But, to do your tests, Even if you have a 920F ROM, you can download a 920W8 kernel as long as you download a kernel which supports your installed Android version. Also make sure to download the proper Stock or AOSP kernel (AOSP for LineageOS). There's not many but there's a few ones that work properly.
Another option is to download an AOSP ROM that works for W8 phones, unzip the file and grab the boot file inside corresponding to the W8 or T-Mobile version. You simply unzip your real ROM you want top install, replace the boot file for the one you got and rezip it. This made my phone boot properly for some F version ROMS but again, not without issues. That's why, I really suggest v7.0 Srock ROMS. I hope this helps you a bit. Again, you can have your own tests and other users may have other answers, but this is based off over 30 bootloops in my case of trying to mod a ROM for the W8 model. It's not easy to find a good one for Canada, I admit!!!
I flashed TWRP years ago, and I found out that I had a G920F version flashed. I don't know why Lineage allowed me to use SIM before, but rectifying this issue seems to made the SIM work in newer versions.
I don't know what the S6's predisposition to having crashing cameras is, but I have avoided this in the past by using custom camera apps, like Open Camera. This has saved me every time.
As for the boot loops... I think another thing that helped is that "format data" doesn't wipe the OS. When you are in recovery, having issues with bootloops in various ROMs, try advanced wipe, and wipe the system. It didn't fix right away, but the time I got Pixel Experience 10 up and running that was the trick.

Categories

Resources