Xposed for MIUI 8(Working)(Tested) - Xiaomi Mi 4i

To Install Xposed Please follow the below steps​1st Step: Download and Flash Official TWRP.
Link: https://dl.twrp.me/ferrari/
Note: Please take Backup of your ROM First I'm not responsible for any soft or Hard Bricks.
2nd Step: Install xposed installer apk.
Link: http://forum.xda-developers.com/showthread.php?t=3034811
3rd Step: Download and Flash Xposed Framework By SolarWarez. and to Root device Flash UPDATE-SuperSU-v2.46.zip
Link: http://www36.zippyshare.com/v/Cdb3Sl2D/file.html and https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
4th Step: Wipe dalvik cache, reboot system.
Note: 1st boot take while to boot into ROM be Patient.
To Uninstall the Xposed Flash xposed-uninstaller-20150831-arm64.zip
Link: http://forum.xda-developers.com/showthread.php?t=3034811
Then Wipe dalvik cache, reboot system.

Reboot
I get random reboots after installing it, so i deinstalled it again D:

rayman13579 said:
I get random reboots after installing it, so i deinstalled it again D:
Click to expand...
Click to collapse
Which miui you using?
Stable or developer?

Jade.a said:
Which miui you using?
Stable or developer?
Click to expand...
Click to collapse
MIUI 8 Global 6.7.21 Beta

rayman13579 said:
MIUI 8 Global 6.7.21 Beta
Click to expand...
Click to collapse
i have not check with Beta ROM but its working fine with Stable

Jade.a said:
i have not check with Beta ROM but its working fine with Stable
Click to expand...
Click to collapse
Ok, Thanks

Related

Question about gapps!

Hello, I just flash my Sony Xperia Tipo with the CyanogenMod 11 - TamsuiCM11 everything is ok but my only problem was that the gapps can't be flash and I take the error "gapps installation aborted status 7", i download the first gapps from the google search i found! Can I dowload gapps, which is specific for the CM11 ?
Thanks for time and attention!
Okay, do this. Install CM11 again - but this time, do NOT install Gapps at the same time. Instead, restart, and then open the recovery again - it'll be CWM 6.0.4.7 or a newer version. Install the Gapps from this new recovery.
NSDCars5 said:
Okay, do this. Install CM11 again - but this time, do NOT install Gapps at the same time. Instead, restart, and then open the recovery again - it'll be CWM 6.0.4.7 or a newer version. Install the Gapps from this new recovery.
Click to expand...
Click to collapse
Thanks for your answer! The gapps will be on the recovery mode after the CM11 install ?
Don_Syleri said:
Thanks for your answer! The gapps will be on the recovery mode after the CM11 install ?
Click to expand...
Click to collapse
Just install the Gapps which you were trying to install before... it'll work in the new recovery.
NSDCars5 said:
Just install the Gapps which you were trying to install before... it'll work in the new recovery.
Click to expand...
Click to collapse
I will the same gapps version that I tried before ?
Don_Syleri said:
I will the same gapps version that I tried before ?
Click to expand...
Click to collapse
Yes, the one you were getting a status 7 with.
NSDCars5 said:
Yes, the one you were getting a status 7 with.
Click to expand...
Click to collapse
I will try it!
But I have one more question and I don't know if you can help me!
This step in the instructions: "wipe data&cache + format /system partition", I first do wipe data + format and then wipe cache! Is this the right way(On recovery mode)?
Don_Syleri said:
I will try it!
But I have one more question and I don't know if you can help me!
This step in the instructions: "wipe data&cache + format /system partition", I first do wipe data + format and then wipe cache! Is this the right way(On recovery mode)?
Click to expand...
Click to collapse
Try what NSDCars5 told you..
If it doesn't work, or may be you think you have downloaded the wrong GAPPS, try this official one from CyanogenMod.
gapps.itvends.com/gapps-kk-20140606-signed.zip
---------- Post added at 08:20 AM ---------- Previous post was at 08:11 AM ----------
Don_Syleri said:
I first do wipe data + format and then wipe cache! Is this the right way(On recovery mode)?
Click to expand...
Click to collapse
No need to wipe data when you flash GAPPS.
Only do it when you are flashing CM11.
StaticBlaze said:
Try what NSDCars5 told you..
If it doesn't work, or may be you think you have downloaded the wrong GAPPS, try this official one from CyanogenMod.
gapps.itvends.com/gapps-kk-20140606-signed.zip
---------- Post added at 08:20 AM ---------- Previous post was at 08:11 AM ----------
No need to wipe data when you flash GAPPS.
Only do it when you are flashing CM11.
Click to expand...
Click to collapse
Thanks I will try it, when they release the next update! Thanks anyway!
Don_Syleri said:
Thanks I will try it, when they release the next update! Thanks anyway!
Click to expand...
Click to collapse
Good luck! :thumbup:
Hello, I'm having the same problem.
Installing on Tipo, flashing TamsuiCM11, 2014/06/06 version. Following the instructions from here, everything is fine until I get to flashing the gapps zip.
CWM is already v6.0.4.9 when I'm flashing CM.
gapps-kk-20140606-signed.zip gives this error, regardless of whether I flash it immediately after CM or after a reboot:
Code:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140606-signed.zip
(Status 7)
Installation aborted.
here
pabechan said:
Hello, I'm having the same problem.
Installing on Tipo, flashing TamsuiCM11, 2014/06/06 version. Following the instructions from here, everything is fine until I get to flashing the gapps zip.
CWM is already v6.0.4.9 when I'm flashing CM.
gapps-kk-20140606-signed.zip gives this error, regardless of whether I flash it immediately after CM or after a reboot:
Code:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140606-signed.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
try to download gapps manually,may work
http://gappsearly.com/:laugh:
216
slogger001 said:
try to download gapps manually,may work
Click to expand...
Click to collapse
Well, I downloaded play services and play store, installed them via adb. However, anything "google-" crashes, and I get frequent "Unfortunately, Google Play services has stopped" messages.
I'd be very thankful for any help wrt this.
Download the small version
pabechan said:
Well, I downloaded play services and play store, installed them via adb. However, anything "google-" crashes, and I get frequent "Unfortunately, Google Play services has stopped" messages.
I'd be very thankful for any help wrt this.
Click to expand...
Click to collapse
download the small version of gapps "20140105" then flash :good:
slogger001 said:
download the small version of gapps "20140105" then flash :good:
Click to expand...
Click to collapse
Worked, thanks!
welcome
pabechan said:
Worked, thanks!
Click to expand...
Click to collapse
:good:

[News] MIUI 9 Redmi 4 Pro/Prime

Just to share to you guys, MIUI 9 for markw has been released for beta testers.
Link download : http://180.88.63.35/bigota.d.miui.com/7.8.28/miui_HM4Pro_7.8.28_8c87331380_6.0.zip
sources : http://www.miui.com/thread-9865060-1-1.html
Can i install this beta test rom. İ am not tester.
So judging from the title is based on android 6.0...
What's happening?!
Sent from my Redmi 4 using Tapatalk
I can't boot after flash that, its said "no os installed" in twrp. Clean flash.
T3sla said:
So judging from the title is based on android 6.0...
Click to expand...
Click to collapse
And you are surprised because...?
draltus said:
Can i install this beta test rom. İ am not tester.
Click to expand...
Click to collapse
I have the same question?
Dark Emotion said:
And you are surprised because...?
Click to expand...
Click to collapse
I'm not surprised at all.I was one of those who thought nougat is just a dream.
Hi all!
It works fine and I'm not a beta tester. I was on 8.2.4.0 Stable (global).
How I installed this rom:
- reboot to recovery (TWRP 3.02)
- do a backup
- install this rom
- wipe cache/dalvik/art, wipe data
- reboot and done
In the market app type "google" and get the google installer if you want Gapps.
giboto91 said:
I can't boot after flash that, its said "no os installed" in twrp. Clean flash.
Click to expand...
Click to collapse
You can isntal by twrp 3.0 or MIUI updater (press 3 dots on right top corners and choose update package).
sabar_op said:
You can isntal by twrp 3.0 or MIUI updater (press 3 dots on right top corners and choose update package).
Click to expand...
Click to collapse
I flash by twrp 3.1.1-2, wipe cache, dalvik, system, data, but still no luck. Then i try to flash miui 8 firstly, then i flash miui 9. Its still not work
giboto91 said:
I flash by twrp 3.1.1-2, wipe cache, dalvik, system, data, but still no luck. Then i try to flash miui 8 firstly, then i flash miui 9. Its still not work
Click to expand...
Click to collapse
First of all flash the miui 9 rom than wipe cache/dalvick/art and data. Than flash the Supersu if you want root. Reboot, done.
Guys, need to disable dm-verity for install this ROM, It always stuck at Mi Logo, or use MiFlash with fastboot ROM.
giboto91 said:
I flash by twrp 3.1.1-2, wipe cache, dalvik, system, data, but still no luck. Then i try to flash miui 8 firstly, then i flash miui 9. Its still not work
Click to expand...
Click to collapse
A clean install would make it. Wipe everything and flash the rom through twrp[emoji106]
Sent from my Redmi 4 using Tapatalk
N1ck474 said:
Guys, need to disable dm-verity for install this ROM, It always stuck at Mi Logo, or use MiFlash with fastboot ROM.
Click to expand...
Click to collapse
No need to disable anything, just flash this rom https://www.androidfilehost.com/?w=files&flid=210736 ,
Before flash the rom, Swipe to factory reset,AND then flash the rom,reboot, DONE...:good:
tsarlm said:
No need to disable anything, just flash this rom https://www.androidfilehost.com/?w=files&flid=210736 ,
Before flash the rom, Swipe to factory reset,AND then flash the rom,reboot, DONE...:good:
Click to expand...
Click to collapse
multilanguage ?
endera said:
multilanguage ?
Click to expand...
Click to collapse
No just English and Chineze
tsarlm said:
No need to disable anything, just flash this rom https://www.androidfilehost.com/?w=files&flid=210736 ,
Before flash the rom, Swipe to factory reset,AND then flash the rom,reboot, DONE...:good:
Click to expand...
Click to collapse
It's not the official package provided by Xiaomi, with official package (OTA) u need to disable or stuck at Mi Logo.
N1ck474 said:
It's not the official package provided by Xiaomi, with official package (OTA) u need to disable or stuck at Mi Logo.
Click to expand...
Click to collapse
no, i flash the official beta for redmi 4 prime, and it works. no lock or so.
micv389 said:
no, i flash the official beta for redmi 4 prime, and it works. no lock or so.
Click to expand...
Click to collapse
I've flashed it 3 times (from stock 8.2, from china dev and from custom) and always stuck at MI Logo, only fastboot flash worked

[GUIDE] Install Oreo Custom ROMs via TWRP

Good day to everyone! I wish to provide proper steps on how to install the latest Oreo custom ROMs via TWRP in order to lessen the clutter in the custom ROM threads.
You'll need the following:
Latest TWRP Official (Fastboot TWRP)
Latest TWRP Installer (PERMANENT TWRP)
Considering you already installed TWRP via fastboot, we'll make it so that it will be permanently installed and you will not need to flash TWRP via bootloader again.
Download ROM + GApps (or no gapps if Pixel Experience)
Reboot to latest Official TWRP
Do necessary wipes (FORMAT data if having storage number issue; if not, wipe system/data/cache) then transfer ROM + gapps + magisk to internal/external storage
Flash ROM (don't reboot)
Flash latest TWRP Installer (for Permanent TWRP)
Reboot recovery (no need to transfer slots anymore as TWRP does it automatically)
Flash Gapps + Magisk
Reboot to system
To DIRTY FLASH or update the same ROM with an updated version
Reboot to recovery
Flash ROM
Flash TWRP Installer
Reboot recovery
Flash Gapps + Magisk
Reboot to system
For installing custom kernels
Download custom kernel
Reboot recovery
Flash custom kernel
Reboot to system
All of these has been tried and tested by me already.
Hey , where to flash rom??
As you have written gapps + magisk , gapps + magisk twice
sikoo1996 said:
Hey , where to flash rom?
As you have written gapps + magisk , gapps + magisk twice
Click to expand...
Click to collapse
I don't know what you mean. Read it again but slowly.
thnx man.
please add instructions to flash twrp permanent or share link.
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
+1
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
dceamit46 said:
+1
Click to expand...
Click to collapse
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
thanks mate now ROM flashing seems very easy
vkbhanwariya said:
thanks mate now ROM flashing seems very easy
Click to expand...
Click to collapse
You're welcome! Good luck in switching ROMs!
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
You're welcome! Good luck in switching ROMs!
Click to expand...
Click to collapse
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
gunmanrishi said:
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
Click to expand...
Click to collapse
You're more than welcome and I'm always more than glad to help out the community. :highfive:
Sent from my Xiaomi Mi A1 using XDA Labs
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
madhpharma said:
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Click to expand...
Click to collapse
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Click to expand...
Click to collapse
Twrp installer, to be exact Twrp-recoveryInstaller-3.2.1-2-oreo.zip
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
cherryb8844 said:
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
Click to expand...
Click to collapse
It's called permanent twrp because it won't get replaced by built in recovery whenever you reboot to recovery from system. TWRP gets installed within a part of the system partition.
Sent from my Xiaomi Mi A1 using XDA Labs
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
varben said:
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
Click to expand...
Click to collapse
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
kopitalk said:
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
Click to expand...
Click to collapse
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Click to expand...
Click to collapse
I was thinking of that too but no, I was on Oreo Jan built the first time I rooted the phone and flash LOS15.1. Do you think I should at least flash Oreo stock once? Maybe my bootloader is still Nougat

Android P Installation with TWRP

Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
roniistar said:
Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Click to expand...
Click to collapse
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Mike.YT said:
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
Click to expand...
Click to collapse
Thanks. Will give this a try
roniistar said:
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Click to expand...
Click to collapse
Yes, it worked this way for me
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
galza said:
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
Click to expand...
Click to collapse
So that TWRP is not deleted, I recommend to install it again in TWRP menu!
Sure is safe.
virtyx said:
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
Click to expand...
Click to collapse
works but i have magisk installed so maybe that did something
NateDev said:
works but i have magisk installed so maybe that did something
Click to expand...
Click to collapse
reveted back to 5.1.9
DP3 is nice, but too buggy, laggy and non user friendly, the gestures feel so much different from stable, i logged a few bugs but not suitable for a DD
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
manohar shenolikar said:
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
Click to expand...
Click to collapse
Install the stable version of android p now and twrp does work. use bluesparks twrp version found in xda.
But what TWRP? Is the TWRP on the official site working also on Android 9?
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Pepinow said:
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Click to expand...
Click to collapse
It's been removed in pie.
---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
zappomax said:
But what TWRP? Is the TWRP on the official site working also on Android 9?
Click to expand...
Click to collapse
No, use bluespark twrp found on his kernel thread.
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Pepinow said:
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
whizeguy said:
Pepinow said:
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
I don't have ex kernel, it's not free it's exactly ?
Exact, i can't boot twrp, phone off and volume down take a screenshot and if its shutdown, there is a simple reboot.
I'm noob lol, if i reinstall twrp it's wipe my phone ?
Click to expand...
Click to collapse
@Pepinow Power off your phone. Hold vol up and power, that will take you to fastboot. From there use the vol keys to show recovery at the top then boot to it. This is of course assuming you flashed the twrp zip when first installing it

Oneplus 6 brick downgrading from beta to stable by twrp

Hello,
I was on open beta 6 and I downgraded using the .zip for that by flashing with twrp. Then i flashed twrp again and reboot.
Afther that, the phone doesn't start. It's is starting withe animation of balls circling. All the storage has been deleted. I tried to copy again the rom by adb in the storage on folder sdcard but it doesn't work.
Any idea?
Thanks
install fastboot ROM
1 boot to twrp recovery https://forum.xda-developers.com/devdb/project/dl/?id=30485
2 Wipe System Partition
3 Wipe Dalvic Cache
4 Flash the zip (OxygenOs 9.0.2)
5 boot system
if you want
6 reboot to twrp and flash magisk 17.3 for root, good luck
akuma48465 said:
1 boot to twrp recovery https://forum.xda-developers.com/devdb/project/dl/?id=30485
2 Wipe System Partition
3 Wipe Dalvic Cache
4 Flash the zip (OxygenOs 9.0.2)
5 boot system
if you want
6 reboot to twrp and flash magisk 17.3 for root, good luck
Click to expand...
Click to collapse
Ok, finally i get to copy the files with adb on the phone.
I try to flash OxygenOs 9.0.2 but it crashed. I will try wit OxygenOs 5.1.11.
Thanks for help.
predator178 said:
Ok, finally i get to copy the files with adb on the phone.
I try to flash OxygenOs 9.0.2 but it crashed. I will try wit OxygenOs 5.1.11.
Thanks for help.
Click to expand...
Click to collapse
all you had to do was flash magisk and everything would have been fine.
MrSteelX said:
all you had to do was flash magisk and everything would have been fine.
Click to expand...
Click to collapse
But flash magisk before flashing the 9.0.2?
predator178 said:
But flash magisk before flashing the 9.0.2?
Click to expand...
Click to collapse
has to be done after rom and or twrp flash. if not, bootloop is what will happen.
MrSteelX said:
has to be done after rom and or twrp flash. if not, bootloop is what will happen.
Click to expand...
Click to collapse
Yes I know, but if you dont flash magisk doesn't matter, only you won't have root permisions. My problem is that I can't install the rom.
predator178 said:
Yes I know, but if you dont flash magisk doesn't matter, only you won't have root permisions. My problem is that I can't install the rom.
Click to expand...
Click to collapse
Now I will try to flash by fastboot the rom 9.0.2 of this post
PHP:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I'm getting crazy this afternoon.
format data, problem fixed. when downgrading, if rom has older security data. formating is required for proper booting.
predator178 said:
Now I will try to flash by fastboot the rom 9.0.2 of this post
PHP:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I'm getting crazy this afternoon.
Click to expand...
Click to collapse
Well, finally i flash by fastboot the room 5.1.11 fron this post. Solved.
Thanks all

Categories

Resources