Database Info

[DISCONTINUED][MOD][13 FEB] AIO MOD - PYD-X & SebastianFM Kernels v1.2.3

AIO Kernel MOD by axetilen & iba21 (AROMA)​
v1.2.3 is gonna be the final version because I'm gonna get the S3 on FEB 18
Requirements:
- PYD-X kernel v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- SENSE-BASED ROM which supports init.d folder
- S-off and rooted phone ~~~> it is very hard to deal with S-on users
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FEATURES:
- Select kernel type or Powerful Kernel Reset
- Selectable OnDemand Configurations: Battery Save, Balance & Performance
+ These configurations change OnDemand behaviors
+ Battery Save: less responsive but save more battery life without significantly afftecting system performance
+ Balance: default configuration of the kernel
+ Performance: more responsive. System will be very smooth despite low frequencies
- Separated CPU max frequencies
- Selectable CPU frequencies: Max and Min
- Selectable CPU Second Phase Frequencies
- 3 choices of 3D GPU max clock
- 11 choices of Undervoltage: -25mV, -50mV, -75mV, -87.5mV, -100mV, -9%, -9% plus, 11%, -112.5mV and -125mV
- Zram on/off
- Delete some (not all) leftovers of other kernels which may affect this kernel (Powerful Kernel Reset)
- Some Tweak Scripts
- Add 4ext Tweaks script
- Fast Engine Flush script by zeppelinrox
- Adrenaline Boost v3 by ImmaWind
- Automatically zipalign apks on boot for better free ram and performance
- Selectable i/o scheduler
- vsync control
- fastcharge control (for PYD & Sultan kernels)
- Notification LED time-out control (only for PYD)
- 64, 128 and 256mb softswap options
DISCLAIMER:
- Softswap can degrade your internal memory. Use it with your own risk
- v1.2.3 could increase the boot time of Sense 3.6 ROMs by 30 seconds -> not sure but if you have this problem, revert to v1.2.2 or open init.post_boot.sh and delete this line: sleep 30
GENERAL NOTES:
- This is NOT a kernel, so you have to flash the kernel before flashing this MOD
- SebastianFM kernel doesnt support Screen Off Frequency
- If you set any value of swap or zram -> minfree will be set automatically to Medium -> no minfree menu
- If you choose No swap or Zram -> minfree menu will appear
- 9% and 9% plus: they have likely the same standby battery life as -75 but worse with heavy usage. So they are stable for almost all devices, more stable than 62.5 and 75mV and much better than -50. If your devices cannot handle -62.5 and -75, -9% and -9% plus are the best choices for you
- I'm neither a DEV nor a pro in this field, so having mistakes is inevitable. Please forgive me
- You tell me if you experience a bug…
NOTE FOR VIPERS ROM USERS & KERNEL TUNER USERS:
- ViperS has Venom Tweaks which is able to apply some settings and overwrite some of the scripts in the AROMA
- Please open Venom Tweaks and set the same as what you choose in the AROMA menu
- Kernel Tuner could also apply its settings and overwrite my scripts. Please check this too
PYD-X KERNEL NOTE:
- fsync control has been removed in the latest test build v4.1.9
- if you're using 4.1.9, in fsync menu, choose anything you want because it is useless
How to execute Fast Engine Flush to optimize your phone???
- Open Android Terminal or some other apps which have terminal feature (Android & System Tuner, Script Manager,...)
- Type:
Code:
su
flush
How to execute Adrenaline Boost to optimize your phone after some days of using???
- NOTE: This may consume a bit more battery because system has to rebuild cache after running this script
- Open Android Terminal or some other apps which have terminal feature (Android & System Tuner, Script Manager,...)
- Type:
Code:
su
boost
KNOWN BUG:
- You tell me
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
- zeppelinrox
- ImbaWind
- msavic123
Changelogs:
v1.2.3:
- Move all the scripts to init.post_boot.sh -> all the stuffs should be changed correctly
- Updated Powerful Kernel Reset: delete Pimp My Rom script to avoid any conflict
- Added Capacitive buttons backlight brightness configuration
- Change OOM ADJ grouping to the default values
v1.2.2:
- Removed BFQ i/o scheduler from the AROMA menu
- Fixed the corrupted thermald.conf -> fix thermald control
- Broght minfree menu back to all swap settings
- Updated zipalign bin
- Added Adrenaline Boost Tweak Script (Thanks ImbaWind)
- Added 2 more ondemand configurations for PYD kernel: Balance+ & Performance+
- Tweak script: Keep Launcher in Memory -> prevent launcher from realoading (a.k.a Bulletproof Launcher)
v1.2.1:
- Added 1 tweak to avoid lag after some days of using (drop_caches)
- Fixed the missing minfree option: Let the ROM manage itself (Thanks xlx890121)
- Editted wrong description in delete.sh
v1.2: (Removed due to my mistake - Changelog is still useful for v1.2.1)
- Removed some unnecessary scripts
- Added 64, 128 and 256mb softswap options
- Extended Powerful Kernel Reset list with Grogg kernel leftovers
- Removed NO_NORMALIZED_SLEEPER which may cause Deep Sleep issue
- Added 1 minfree option: Let the ROM manage itself
- Fixed 1 typo in minfree description [RIP my English, I wrote "discription" in the AROMA changelog instead of "description"]
v1.1 for PYD & SebastianFM kernels
- Rewrite scripts - more organized
- Remove Sultan kernel from AROMA menu
- Fixed some wrong codes: battery calibration script not installed
- Removed Fsync control
- Fixed bug for separated CPU control
- Fixed Black screen issue from v1.0
v1.0 AIO mod for 3 kernels:
- Rewrite scripts
- Support 3 kernels in 1 MOD
- Added some more tweaks
- Added Powerful Kernel Reset in AROMA Menu
- Removed SManager & SMWidget apks (download from Play Store for free)
- Updated Powerful Kernel Reset for more trash cleaned up
- Added new features: LED time-out, fastcharge, KSM, msm_mpdecision, etc...
- Updated AROMA installer to v2.56
- Automatically clean up .thumbnails cache on boot
- v2.4:
+ Removed Read Ahead Cache Size config in AROMA menu -> set as 2048kb by default
+ Added some tweaks in init.post_boot.sh (Huge thanks to DarkSense DEVs)
+ Auto zipalign all apks on boot
+ Added -112.5 & -125mV - classic style in AROMA (Chuck Norris!!!)
+ Fixed the bug that 4ext tweak script is not applied
+ Moved vsync script to 69force
- v2.3:
+ Removed 4ext Tweaks in AROMA menu -> Installed by default
+ Added max frequency control for each CPU
+ Changed default minfree in AROMA menu to "Optimal I"
+ Changed a little "Battery Save - Ondemand configuration" for a bit better battery life
- v2.2:
+ Added minfree configuration with 7 choices
+ Move logcat disabling script to 69force
+ Changed some default options in AROMA menu
+ Removed Kernel Sleep Normalization in init.post_boot.sh
- v2.1:
+ Changed permission of system files to default
+ Added vsync configuration
+ Updated 4ext tweaks
+ Updated AROMA version (thanks iba21)
+ Updated Powerful Kernel Reset for cleaning more leftovers
- v2.0:
+ Re-arrange UV values in order and add -11% to the list
+ Add some scripts in init.post_boot.sh to save a bit more battery
+ Selectable OnDemand Configurations: Battery Life, Balance, Performance & Performance Plus (OMG! Fast like hell!!!)
+ Add 4ext Tweaks for better system performance
+ BUG: mmcblk1 read ahead cache size hasn't been changed correctly yet but it doesn't have any effect on your device (100% SAFE!!!)
- v1.7
+ SD cache size is expanded to Read Ahead (add 2 more settings) - Thanks noodles2k
+ Move GPU, Read Ahead & i/o scheduler from init.qcom.post_boot.sh to 69force
+ Add options to select Read Ahead cache size & i/o scheduler
+ Add options to install Battery Auto-Calibration Script (seo) & Logcat Disable
- v1.6:
+ fix the problem that -87.5mV uV doesnot work (Thanks noodles2k for the report)
+ Change some codes -> Hopefully the MOD would work correctly at the first time (Thanks iba21)
- v1.5:
+ Finally fix bug that GPU clock isnot changed
+ cfq and 2048 SD cache is set as default
- v1.4: It has all features of Powerful Kernel Reset
+ Fix a small mistake that max GPU clock arenot changed
+ Add some information after flashing
+ Change permissions of some scripts
+ Include thermald and mpdecision
- v1.3: (noticeable version)
+ Change 69force script to a better one (!!!)
+ Delete more leftovers of other kernels (hopefully all!)
+ Fix some wrong codes which don't delete leftovers
+ Remove 98swap (Yank555) - Hard Swap & Soft Swap from leftover list
+ Remove down_differential from init.qcom.post_boot.sh and let system choose the value itself
- v1.2:
+ Add cfq i/o schedulder & 2048kb SD cache size (read_ahead_kb)
* Yes: install cfq and 2048kb
* No: default settings: deadline & 128kb
- v1.1:
+ Include init.qcom.post_boot.sh (removed min CPU freq)
+ Include init.post_boot.sh
+ Include thermald.conf which is missing in some ROMs - modified for better temperature management
- v1.0: initial release
DOWNLOAD:
v1.2.3
Dropbox
Mirror - xda attachment
Wanna give me a cup of coffee
Click DONATE TO ME below my account info
v1.2.2
Dropbox
Mirror - xda attachment
v1.2.1
Dropbox
Mirror - xda attachment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Powerful Kernel Reset - MOD Remover for Sense-based ROM (non-AROMA) - [UPDATED 23 JAN]
- The same cleaning features as kernel MOD => remove leftovers from other kernels
- Include thermald and mpdecision
- Include stock init.qcom.post_boot.sh, init.post_boot.sh and modified thermald.conf
Download Powerful Kernel Reset - MOD Remover
(Changed a little bit for more information - Nothing new - The same links)
Dropbox
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ADDITIONAL MODs:
SoftSwap
- Requirement: a lot of internal space
- 64mb with swappiness = 60
- 128mb with swappiness = 90
- 256mb with swappiness = 100
- Softswap uninstalling script
- Automatically create swap file if it is missing on boot
NOTE:
- You would see a low storage message -> ignore it and increase your space by moving apps to sdcard and use Clean Master to clean up trash
- If you want to change swap size, flash the uninstalling script first and then flash the new swap zip
To check Swap status, open android terminal and type:
Code:
free -m
DISCLAIMER:
- Softswap can degrade your internal memory. Use it with your own risk
Battery Auto-Calibration Script by seo (from ARHD ROM - non-AROMA)
- Automatically delete batterystats.bin after unplugging your charger
- Increase battery percentage accuracy
- Minimize the situation that your device reaches 100% but actually not that much => last longer
- IT DOESNOT IMPROVE BATTERY LIFE BUT HELP YOU TO HAVE A MORE ACCURATE BATTERY STATISTIC + AND THE SITUATION IN THE THIRD BULLET POINT (100%...)
- Some people will say it is useless at all but I think it is still useful in some cases => That's why this is included in ARHD or Virtuous Inquisition ROMs
Download Battery Auto-Calibration Script
DropBox
Mediafire
Logcat Disable (non-AROMA): modified from ViperS ROM
- Delete dev/log/main on every boot
- Save some battery life (not significant)
- If you are a normal user and rarely report bug to ROM Devs, this MOD is useful. However, if you are a tester, this MOD will delete logcat, so you don't have that file to send to the Devs
Download Disable Logcat
DropBox
Mediafire
Re-enable Logcat - Disable Logcat MOD remover (non-AROMA)
- Remove Disable Logcat MOD if you don't want it anymore
Download
Dropbox
Mediafire

Thanks for sharing! Hard!

Here are a couple of lines I find useful -
This changes the read ahead for the emmc and sd block devices as well as the virtual sd one.
Code:
echo "4096" > /sys/block/mmcblk0/queue/read_ahead_kb
echo "4096" > /sys/block/mmcblk1/queue/read_ahead_kb
echo "4096" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
This changes the io scheduler for emmc and sd, SebFM has noop, cfq and deadline.
Code:
echo "noop" > /sys/block/mmcblk0/queue/scheduler
echo "noop" > /sys/block/mmcblk1/queue/scheduler
This dims the capacitive buttons, in SebFM changing their brightness the usual way doesn't work.
Code:
echo 2 > /sys/class/leds/button-backlight/currents
This mounts swap and sets swappiness. I find it better than Yank's as it's nice and simple and doesn't waste time and cpu.
Code:
swapon /dev/block/mmcblk1p3
echo 70 > /proc/sys/vm/swappiness

noodles2k said:
Here are a couple of lines I find useful -
This changes the read ahead for the emmc and sd block devices as well as the virtual sd one.
Code:
echo "4096" > /sys/block/mmcblk0/queue/read_ahead_kb
echo "4096" > /sys/block/mmcblk1/queue/read_ahead_kb
echo "4096" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
This changes the io scheduler for emmc and sd, SebFM has noop, cfq and deadline.
Code:
echo "noop" > /sys/block/mmcblk0/queue/scheduler
echo "noop" > /sys/block/mmcblk1/queue/scheduler
This dims the capacitive buttons, in SebFM changing their brightness the usual way doesn't work.
Code:
echo 2 > /sys/class/leds/button-backlight/currents
This mounts swap and sets swappiness. I find it better than Yank's as it's nice and simple and doesn't waste time and cpu.
Code:
swapon /dev/block/mmcblk1p3
echo 70 > /proc/sys/vm/swappiness
Click to expand...
Click to collapse
I have already had:
Code:
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
echo "cfq" > /sys/block/mmcblk0/queue/scheduler
echo "cfq" > /sys/block/mmcblk1/queue/scheduler
I will consider your advice
Can you explain more about scheduler backlight and swapiness? I think cfq is better than deadline and noop
Thanks

Thanks for you hard work. Will check this thing out ASAP!

Glad you got your own thread.
Nice little mod this, latest 1.6 seems to be working as expected.
As i will be flashing new viper soon anyway I might have a bash at some higher frequency and see if I can crack 50fps in nenamark 2
Sent from my SuperSensation.
ViperS ROM 1.1.0.
Sebastian OC Kernel 1.5.2
Anker battery.

I have an issue with what you've written on Logcat Disabling.
Your way (via a script) does not save or improve battery life in any way, it just deletes the log on every boot. If its disabled within the kernel (ie that actual logcat service is disabled) then it would save some battery life, but as ERD Hacre said in one of his kernel threads, battery life saving on that one wont be much, tbh I'd be amazed if it turned out to save more than 1 minute of battery life.

Jonny said:
I have an issue with what you've written on Logcat Disabling.
Your way (via a script) does not save or improve battery life in any way, it just deletes the log on every boot. If its disabled within the kernel (ie that actual logcat service is disabled) then it would save some battery life, but as ERD Hacre said in one of his kernel threads, battery life saving on that one wont be much, tbh I'd be amazed if it turned out to save more than 1 minute of battery life.
Click to expand...
Click to collapse
ok. I'll fix my word
thanks you for heading up

ObiWan_C said:
Thanks for you hard work. Will check this thing out ASAP!
Click to expand...
Click to collapse
http://smiliesftw.com/x/glock836_roll_eyes.gif
you are welcome... :silly:
it was so difficult to write the code of aroma, of the script, and the fixes.. :crying:

Finally you have started you own thread
good job on this mod bro\
I've been using this since v.1.2

Oh so u started Ur thread finally.. congrats bro for coming up with Idea.. now it wud b easier for everyone, to talk abt mod n kernel seperately ;P
Sent from my HTC Sensation 4G using Tapatalk 2

When i set:
MAXFREQ: 1566 MHz
MINFREQ 192 MHz
Second Pharse: 918 MHz
3D GPU: 267
No UV
No ZRAM
I got error: mount() expects 3 args, got 4
Edit:
Redownloaded mod and now it's ok!

New thread* Somewhere in post add whether it is CM10/Sense Etc
Itll save you a lot of questions that you will probably have in a few minutes

Sounds good!
Is it needed to flash Sebastian last Kernel before or only to flash the mod? Sorry if this is astupid question but never played arround much with kernels. I am a skinner only

Dic3ptor said:
Is it needed to flash Sebastian last Kernel before or only to flash the mod? Sorry if this is astupid question but never played arround much with kernels. I am a skinner only
Click to expand...
Click to collapse
yes first flash SebastianFM 's kernel and the mod

rzr86 said:
yes first flash SebastianFM 's kernel and the mod
Click to expand...
Click to collapse
Thank you. I think its logical but better to ask to much as to less. Thank you again!
EDIT: Another question. What a your settings til now and which settings are the best maybe? Can someboddy post some experience here?

Dic3ptor said:
Thank you. I think its logical but better to ask to much as to less. Thank you again!
EDIT: Another question. What a your settings til now and which settings are the best maybe? Can someboddy post some experience here?
Click to expand...
Click to collapse
in my device:
maxfreq - 1782mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 320mhz
so far no problems

rzr86 said:
in my device:
maxfreq - 1782mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 320mhz
so far no problems
Click to expand...
Click to collapse
Thats my setup and til now no probelms! Phone stay cool when using mobile network and Games! Great thing. Thanks to Thread operator for this mod.
maxfreq - 1566mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 276mhz

Do i have to use setcpu to set the setting after i flashed this mod? Thanks
Verstuurd van mijn GT-P7500 met Tapatalk

saigon66 said:
Do i have to use setcpu to set the setting after i flashed this mod? Thanks
Verstuurd van mijn GT-P7500 met Tapatalk
Click to expand...
Click to collapse
No you don't need setcpu. You can set your favorite setting when installing the mod. Aroma installer will ask for each settings you can do. It's very easy to set it up.
Gesendet von meinem HTC Sensation with Beats Audio mit DroiDevs Premium

[MOD][SCRIPTs][TWEAKs]Fly-On Mod�V5.0 Alpha8/Feel The Smoothness!/Upd:11/08/15

Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
YOU CAN NOW USE THE NEW FLY-ON MOD APP : Click here
Index :
-Post 1 : Introduction to the Mod and general FAQ.
-Post 2 : Download links.
-Post 3 : Technical info and explications about Tweaking Android.
-Post 4 : changelog.
Introduction :
Hi guys,Fly-On Mod is a Mod that combines many scripts, binaries and other tweaks in one package which is aimed to improve Android system's performance,smoothness,reduce GUI lags and of course some useful battery life improvements and tweaks!
Features and Improvements :
- Full memory management/Better multitasking.
- Linux kernel tweaks and improvements for better performance and battery life.
- Less lags for gamers.
- Entropy generator engine used to reduce lags.
- Zipalign apps in "/system" and apps in "/data" every 24 hours which result in less RAM usage.
- Sqlite optimizations and faster database access.
- CPU governors tweaks and improvements for better performance and battery life.
- Better thermal management and less overheating.
- Increased SD Card read-ahead cache to 2048 KB for faster SD card read and write.
- Ad blocking.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
Requirements :
- Android 2.3.x (Gingerbread) or higher.
- Kernel with init.d support.
- Root and newest busyBox version.
-Custom recovery(like CWM or TWRP).
- At least 4MB of free space in "/system".
How to install :
Before Flashing please do a nandroid backup to avoid any incompatibility issues.
1. Download the Fly-On Mod main pack and sqlite pack according to your phone's Android version.
2. Rebooting into recovery mod.
3. Install Signed_Fly-On_Mod_V5.0-Alphax.zip and sqlite_xversion.
4. Reboot and feel the smoothness!
In the package :
+/system/etc/init.d/ scripts :
-ram_manager: It's a complete memory manager
-92cleaner: Cleans log files and tombstones at every boot.
-09RW_turbo: Sdcard and I/O scheduler tweaks
-zipalign: Zipalign apps in "/system" and "/data" every 30 hours.
-98fly_engine: Contains various tweaks and improvements. (3G/VM/sysctl/kernel/battery life tweaks etc.)
-sqlite_optimize: Optimizing database of apps every 30 hours.
-03killer: Kills media server and google services when unused to save battery.
-94Governor_tweaks: Tweaks for CPU governors,It's aimed on better performance and battery backup.
-fstrim: Optimizing system files every 1 month.
-Entropy_engine: Well, as the name says.
-95DNS: DNS caching script for faster internet access.
+/system/xbin/ :
-sqlite3
-zipalign
-Openvpn
-fstrim
-entro
-rngd
+/system/etc/hosts : Adblocker
+/system/etc/Entropy_script/ : Contains main entropy engine files
+/system/lib/
-libncurses.so .
Frequently asked questions:
Q: Can I use Fly-On MOD™ with my device?
A:Fly-On works on all Android devices(Samsung Galaxy,Sony Xperia,HTC,Google,LG and all other OEMs) with Root,busyBox and init.d support.
Q: I'm coming from an old version should I uninstall my version before installing new one?
A:No,Just new version over old one, the installation package will do everything.
Q: I feel very comfortable with my current old version,why should I update to never version?
A:Even If you feel very comfortable with your old version you should update to get latest improvements and bugfixes.
Q: What is EXT4 tweak?
A:It's a tweak that disables EXT4 journalism which increases I/O speed.
Q: Can I use EXT4 tweak?
A:In order to use this one you'll need your phone's file system to be on EXT4.
Q: Can I use INT2EXT+ with Fly-On Mod?
A:Yes It's totally compatible.
Q: Can I use Fly-On MOD™ with any other MOD that uses init.d scripts,binaries and Tweaks?
A:No,you can't as they will conflict ,so choose one of the them.
Q: And when I install a newer Fly-On version should I re-install my RAM Configs/EXT4 tweak?
A:No need.
Q: What is the best kernel to use with Fly-On?
A:No one is the best,Use any custom kernel with init.d support.
Q: What is entropy engine?
A:It an engine used to reduce lags by keeping a section of the Android file system (/dev/random) full of random bits so that the system does not have to wait for the file system to generate them.
Q: So for better performance/battery Entropy must be on or off?
A:No,It just off by default to let users have their own choices.
Q: Can I use Supercharger V6 with Fly-On Mod?
A:Yes,but If you are using Fly-On RAM manager delete It first.(Keep Fly-On main package installed).
Q: But If I have an older version what to do to uninstall Fly-On?
A:Update your version to V4.0 A6 first then Flash the uninstaller.
Q: Do I need to mount /system or /data before flashing?
A:No need to do that as the installation package does everything.
Q: There are many sqlite zips,which one should I pick?
A: Depending on your phone's Android version,like if you are running Android 4.0.x Ice Cream Sandwich flash sqlite_ICS.
How to use Fly-On Mod,after full installation :
+To manage entropy engine,type in terminal :
Code:
su
Entropy_engine
To check if the files are correctly installed type in terminal:
Code:
su
Fly-On
+To uninstall the Mod,type in terminal:
Code:
su
uninstaller
Notice also that:
- Don't use any Task Killer with this Mod !
- Don't use Fly-On Mod with any other tweaking script as they will conflict !
- If you want to use Fly-On Mod in your ROM or your Mod ask for permissions first and give me credits !
- If you have any question ask me in the thread instead of PMs or I will not reply !
- Read well the thread before posting any newbie questions and do not ask for an already answered question !
Credits:
-Thanks to Darky for the base zipalign script.
-Special thank to pikachu01, zacharias.maladroit,collin_ph and juwe11 !
-Big thank to zeppelinrox and Ryuinferno !
-Big thanks to BSDgeek_Jake for the great hosts file.
-voku1987 and mcbyte_it.
-Big thank to nolinuxnoparty for designing Fly-On logo !
-Any XDA Member That helped Me out in This Project !
-Google!
The source:
you can find my source on the Github: https://github.com/Slaid480/Android-Universal-Fly-On-Mod/tree/Beta
If you have any feature's request use pull request.
If you liked this mod,please rate this thread to 5 stars and press the Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep this project up to date!
Click here to donate!
XDA:DevDB Information
Fly-On Mod�, Tool/Utility for the Android General
Contributors
slaid480
Source Code: https://github.com/Slaid480/Android-Universal-Fly-On-Mod
Version Information
Status: Alpha
Current Stable Version: RC1
Current Beta Version: 1
Created 2014-06-06
Last Updated 2015-08-11

Download
Fly-On Mod V4.0 :
-Beta7: click here
-Beta8: click here
-Beta9: click here
Fly-On Mod V5.0:
-Alpha1: click here
-Alpha2: click here
-Alpha3: click here
-Alpha4: click here
-Alpha5: click here
-Alpha6: click here
-Alpha7: click here
-Alpha7 No AROMA: click here
-Alpha8: click here
-Alpha8 No AROMA: click here
if you liked/downloaded the Mod, leave a thanks,it encourages me to continue working on this project !

About Android tweaking
This Post is reserved for sharing various information about Scripts/Tweaks used to Tweak the Android system through the Linux kernel.
The main goal of using scripts and tweaks:
Scripts and tweaks are used :
-Improve Performance and GUI Smoothness.
-Improve Battery Life.
-Tweak and Optimize the Android engine!
Useful Info About Tweaks:
-LMK:
The Low Memory Killer is a constant debate between more free RAM and more multitasking capabilities as free RAM (more than 60MB free) is actually wasted RAM.
The Low Memory Killer is actually a feature in the Android OS used to improve memory management.
This is an important feature due to the perennial problem of having low free memory causing lagginess and slowness in launching apps. When you have free memory lingering around the number of 40MB or less, the Android OS just lags like hell.
What this would mean is, you would want to tweak the LMK to not have the situation of it having less than 40MB (or even close to that).
The modern Linux machine in the Android ecosystem relies on a mechanism called Low Memory Killer (LMK) to consistently free up RAM. This is due to Android's internal mechanism of caching apps (and never fully exiting them) when you press the back button. This is to enable faster app switching and provide a seamless experience for apps usage model. Android also, by itself will also constantly look for often used apps to cache them for faster app opening. This will happen even before your system fully boots.
Now, when you mention LMK, the most obvious thoughts that come up are minfrees and Out Of Memory (OOM) groupings. Yes, those two are integral parts when it comes to LMK. The issue here is that no one actually mentioned that there are two LMK systems in Android, that being:
- Linux LMK
- Android Dalvik VM LMK
-Journaling/Barriers:
-This has been a touchy subject here in XDA for most people who debate about it. Most recently,Some Scripts included a way to disable journalism on these partitions:
/system (System is read only, it's safe to remove journalism. However, you will not see speed increase by removing it as you're not writing onto /system 99.99% of the time unless you're using Titanium backup to remove system apps or copying init.d scripts to it)
/cache (Cache can be rebuilt on the fly. Data corruption on it is not game breaking)
/data (All of your data on your phone is here. Removing journalism can risk data corruption. Read more below)
On whether we need journalism or not, I will pose this situation:
Journalism is required to maintain data consistency in events that could lead to data corruption. Data could get corrupted in a number of situations:
- Misbehaving app that constantly writes without syncing/committing data to the disk
- Power loss due to forced reboots or bootloops when data is partially written/committed into disk
-Memory leaks:
If you found out that your Android is laggy after sometime and a reboot will make it faster, then you're experiencing memory leaks. "free" is a command to show your currently free memory. It will not necessarily be the same value as your phone's free memory.
-Busybox:
Busybox is required to perform all of your superuser activities in your android phone. There are some problems associated with this when ROM developers decide to use a certain version of Busybox that are incompatible with the binaries that we use in our phones.
-MinFree:
Minfree is part of the Kernel used to multitasking and It differs from a Phone to another because of the RAM available in users space.
-Network Tweaks:
There are some Tweaks that are used to increase the speed of your Network browsing,downloading and uploading
-Build.Prop Tweaks:
Those Tweaks can generally be found in Build.prop /system and they are used to optimize overall system speed and battery
-SD Card Speed Fix:
This is a Tweaks that Has the goal of increasing the read-ahead speed of your SD Card,and that by improving your SD R/W speed.
-Smoothness Tweaks:
Well with the Linux Kernel there is a possibility to add some Tweaks to optimize the GUI Smoothness.
-Entropy generator engine:
This engine can reduce lag by keeping a section of the Android file system (/dev/random) full of random bits so that the system does not have to wait for the file system to generate them.
-Zipalign:
Zipalign is a tweak used to optimize Android application (.apk) files. The purpose is to ensure that all uncompressed data starts with a particular alignment relative to the start of the file. Specifically, it causes all uncompressed data within the .apk, such as images or raw files, to be aligned on 4-byte boundaries. This allows all portions to be accessed directly with mmap() even if they contain binary data with alignment restrictions. The benefit is a reduction in the amount of RAM consumed when running the application.
Credits::
Well,what I can say is that I shared those useful Info after some research and my experience with Linux/Unix,and those some of My main Target that I use to find some of the useful info:
-XDA Forums
-Goolge

Change Log:
Fly-On V0.1:(8/4/2013)
initial release.
Fly-On V0.2:(16/4/2013)
-re-writed and cleaned script.
-New zip-aligning script based on Darky's zip-aligning script.
-Adjusted Values to be adapted to this device hardware.
-Deleted touch sensitivity tweaks(useless).
-Corrected Min-free values.
-Many other minor stuff...
Fly-On V0.3:(17/4/2013)
(If you are coming from an old version,below V0.3 you will need to delete all scripts in your /system/etc/init.d folder)
Now Fly-On Mod is a full package of scripts:
-Replaced the main Fly-On script with 3 scripts to avoid any functionality problem and ensure more stability (S98system_tweak,05LagFixer,09sdcardspeedfix)
-Added some useful build.prop Tweaks(for better performance and battery life)
-Fixed the Low memory killer bug with the new Lagfixer script.
Fly-On V0.4:(17/4/2013)
-New SQlite_optimize script .
-New Script For Network TCP optimizations.
-Adjusted Min-Free Values for better Multitasking!
Fly-On V0.5:(19/4/2013)
-Fixed permissions Via Updater-script to Make sure that scripts are properly working!
-Some cleaning to the S98system_tweak script!
Fly-On V0.6:(20/4/2013)
Delete all old Fly-On scripts before installing V0.6!
this update contains various improvements bugfixes and changes with a full new script:
-Deleted 05Lag_fixer script!
-Deleted S97network_tweaks!
-New 08Fly_engine script with a lot of tweaks and improvements:
+Full Memory management
+Sysctl tweaks
+Kernel and VM tweaks
+File system speedUp
+Ext4 tweaks
+Improved Wifi_Idle for better battery Life!
-Updated zip-aligning script for faster zip-aligning and short boot time!
Fly-On V0.7:(21/4/2013)
-added xbin to make sure that zipalign and fly_engine scripts are working properly!
-Now with two versions:
+Stock version for Stock gingerbread samsung roms and roms based on samsung roms!
+CM version for cyanogenmod7/9/10 Based roms and AOSP GB/ICS/JB roms too!
Fly-On V0.8:(22/4/2013)
-Fixed errors on Fly_engine script.
-Added I/O scheduler tweaks.
Fly-On V0.9:(25/4/2013)
-Fixed sqlite3 bin permissions.
-Removed journalism on EXT4 partition(greatly increase I/O).
-added remountCM_fullext4 script for CM version.
Fly-On V1.0:(27/4/2013)
If you are coming from Fly-On V0.9 there is no need to delete the old scripts!
-deleted fly_engine script(contain a lot of errors,I will be working on rewriting it).
-added a new ram_manager script (Full memory fix and management).
-fixed proper permissions for all scripts.
Fly-On V1.1(29/4/2013)
-Deleted swapon tweak as it's only causing troubles!
-heavily modified updater-script to make the /system/etc/init.d folder clean while installing the Mod!(there is no longer need to delete scripts manually)
Fly-On V1.2(2/5/2013)
-added new script 02logdelete1 to delete logs+tombstones!Huge thank to -CALIBAN666- for the idea and the big help!
-updated the updater-script with more scripts to delete in init.d folder
-Fly-on mod is now more stable than before!
Fly-On V1.3(3/5/2013)
-Fixed sdcard readahead speed(need some testing)
-Under the request of some users the ram_manager script is now separated from the CWM flashable zip and It has it's own CWM package!
-Under the request of some users the ram_manager script is now with two version : one for multitasking and the other one for hard gamers!
-Some cleaning to the 98system_tweaks script(deleted unseful stuff)
Fly-On V1.4:(7/5/2013)
-New Ram manager config(Balanced)for people with moderate apps use!
-Tried to fix deletelog script(I'm not sure need testing)
Fly-On V1.5:(9/5/2013)
-Fully Re-writed Fly_engine script ensuring maximum compatibility with:
+I/O scheduler tweaks(choose noop for maximum compatibility).
+File system speedup.
+Various sysctl tweaks - Kernel, VM, file system!
Fly-On V1.6:(10/5/2013)
-Fixed Bug with 02logdelete1 script,thanks to -CALIBAN666- !
-Renamed 085Fly_engine to Fly_engine to provide any invalid argument!
-Added Openvpn binary.
-Some minor fixes to the Fly_engine script.
Fly-On V1.7:(11/5/2013)
-Updated 02logdelete1 script with new features and improvements thanks to : -CALIBAN666- .
-Added Default.prop which contains Extra fly_engine tweaks!
-Deleted some tweaks from Fly_engine script(the ones that could conflict with 98system_tweak script).
-Fixed proper Fly_engine script permissions through the Updater-script.
Fly-On V1.8(12/5/2013)
-New RAM manager config(Nexus)It's the original Google config!
-Updated sqlite3 binary
-Modified the CWM installation package to make It detect your android version and install the binaries according to it!
Fly-On V1.9:(13/5/2013)
-Modified Fly_engine script with some tweaks added:
+tune2fs feature(Disable journalism).
+Disabled normalize sleeper.
+Deleted I/O specific tweak for noop I/O scheduler.(Feel free to use any scheduler with Fly-On)
Fly-On V2.0:(15/5/2013)
-Added new RAM manager(hard multitasking)!
-Added new script to improve your touchscreen sensitivity !
-Delete 02deletelog1 for know(will be back after fixing bugs on It).
-Now you can install It over adrenaline engine/velocity directly(Edited CWM installation script).
-Fixed a small error in 98system_tweak script.
Fly-On V2.1:(17/5/2013)
-Fully reworked 98system_tweak script with:
+Lesser script size(from 23kb to 19kb).
+ Edited many values for more smoothness and better battery life.
-Some few modifications to the Fly_engine script.
-Added many info to the first post!
Fly-On V2.2:(18/5/2013)
-02logdelete script is back and it's working properly!
-Fixed a small error in 98system_tweak.
-Reduced 98system_tweak size from 19KB to 17KB.
Fly-On V2.3:(20/5/2013)
-Heavily Edited 98system_tweak with:
+New governor Tweaks!
+Edited many values for better performance/battery life.
+Deleted few lines that are causing issue on some phones!
Fly-On V2.4:(23/5/2013)
-Fixed 02logdelete1 script!Now It's working properly thanks to :vampire: !
-New script 98fly_core It's the fusion of 98system_tweak and Fly_engine scripts(to avoid any incompatibility/stability issues).
-Removed "Disable EXT4 journalism" feature as It's incompatible with many devices that runs a system partition other than ETX4.
Fly-On V2.5:(27/5/2013)
-Fully reworked 09sdcardspeedfix script(reduced size from 3Kb to 1Kb).
-Some cleaning to the zipalign script.
Fly-On V2.6:(31/5/2013)
-Cleaned up 98Fly_core script.
-Some misc changes to the sqlite_optimize script.
Fly-On V2.7:(1/6/2013)
-Reverted back to old 09sdcardspeedfix script(compatible with more devices).
-Fixed a small bug with the 98fly_core script.
-Deleted s78sensitive_touchscreen script for now.
Fly-On V2.8:(2/6/2013)
-New zipalign data script used to zipalign apps on /data at every 48H.
-New sqlite optimizing system at every 48H.
-Deleted remountCM_fullext4 from CM version (another step to make Fly-On more universal).
Fly-On V3.0:(5/6/2013)
-fixed a small issue in 98fly_core script.
-Reworked the 02logdelete1 script.
-Reworked zipaligndata script.
-Reverted back to old sqlite optimizing script.
-Added partition remount tweaks for I9300 in a single package.
-Added Fly-on uninstaller for Version 2.4+ .
Fly-On V3.0 RC0:(9/6/2013)
-Added NOS entropy seeder generator engine,big thank to Exit_Only.
-Added hosts file for ad blocking.
-Fixed uninstaller(no more need to mount /system).
Fly-On V3.0 RC1:(18/06/2013)
-Added NOS entropy init.d script with light/moderate/aggressive profiles and sets moderate by defaults thanks again to EXIT_ONLY !
-Added new 99logdelete script to execute 02logdelete1 script properly at boot thanks to Erikeleria!
-Many minor changes.
Fly-On Mod™ V4.0 Alpha1:(30/06/2013)
-Renamed to : Fly-On Mod™
-Updated and Fixed Nos entropy engine,Now it has:
+Feature to switch Entropy on/off(Nos entropy engine is off by default).
+Two governors light and moderate.
-New 03kill_media_server which kills media server when unused to save battery!
-Redesigned the updater-script which will now:
+Wipe dalvik cache/boot cache while installing Fly-On Mod.
+Delete some old nos entropy parts.
+Fixes Nos entropy engine Permissions.
-Some other minor Fixes and changes.
-Redesigned the Thread with more info(Still a work-in-progress due to the lack of time)
Fly-On Mod™ V4.0 Alpha2:(01/07/2013)
-From now on there will be only one version for AOSP based Roms(like CM) and stock Roms too.
-Added Uninstaller compatible with V4.0 only check the FAQ.
-Fixed a minor issue on NOS entropy engine.(fixed missing rngd_state permissions)
-Updated sqlite3 binary.
-Fully rewritten the updater-script with better look.
-Corrected some few missing permissions.
-updated scripts description in /system/etc/init.d/ .
-Deleted swap tweak from 98fly_core script and cleaned the script up.
Fly-On Mod™ V4.0 Alpha3:(03/07/2013)
-Now using hosts file from here with 283540 domains blocked (Adware/Malware/Spyware/Blotware) Big thank to BSDgeek_Jake.
-Fixed permissions for framework through the updater-script(might fix issues for some users).
-Delete network security related tweaks from 98fly_core script.
-Deleted some parts of default.prop that was conflicting with 98fly_core script.
-Some other minor changes.
Fly-On Mod™ V4.0 Alpha4:(07/07/2013)
-CPU governor tweaks are now in a separated script called 04Governor_tweaks.
-Fixed zipaligndata script bug(need some more testing).
-added run every N day feature for darky_zipalign and sqlite_optimize scripts and fix It to 48H(you can change It).
-Updated the uninstaller.
Fly-On Mod™ V4.0 Alpha5:(10/07/2013)
-Fully Rewritten and revolutionary 98fly_core script.
-Updated the Nos Entropy generator engine with:
+Default light governor (When activated).
+Less rngd battery drain and no more random reboots.
+Adjusted light governor value.
+Fixed the entropy logging system.
-Updated the AD blocking hosts file to latest one from 03 July.
-Cleaning Log files/tombstones system moved to 98fly_core script,so 99logdelete and 02logdelete1 scripts are now deleted.
-Deleted default.prop from /system.
-Deleted resolv.conf from /system/etc.
-Updated the uninstaller and It's compatible with Alpha5 so if you want to uninstall the mod update to Alpha5 than use the uninstaller.
Fly-On Mod™ V4.0 Alpha6:(17/07/2013)
-Fixed the laggy UI for gingerbread devices.
-Now Fly-on coming in two versions GB for gingerbread and JB for 4.0+.
-Cleaner script is back again,big thank to : -CALIBAN666- .
-fixed the logging system for 02logdelete1 script.
-Renamed 98fly_core script to 98fly_engine and deleted some few buggy codes.
-Updated the uninstaller,update to alpha6 before using It.
Fly-On Mod™ V4.0 Alpha7:(24/07/2013)
-Now there is only 1 version for all Android versions.
-Patched rngd binary for better entropy generation without killing battery life.
-Moved rngd binary to /system/xbin .
-Improved the network tweaks.
-corrected build.prop tweaks values.
-Reverted back to old hosts file
-Renamed some scripts to avoid any conflicting with some memory tweaks.
-Updated the uninstaller.
Fly-On Mod™ V4.0 Alpha8:(30/07/2013)
-Added Fly-On Mod logging engine.
-Fixed Entropy generator engine,and It's on by default.
-RAM manager is back to the main package with tuned values.
-Added the GNU General Public License.
-Deleted VM tweaks from 98fly_engine
-Added sysctl.conf
Fly-On Mod™ V4.0 Beta1:(03/08/2013)
-Super stable nearly everything is working.
-Fixed bootloop on some GB Roms.
-Minor fix to the entropy engine.
-Cleaned the updater script.
-Many other minor fixes.
Fly-On Mod™ V4.0 Alpha9:(08/08/2013)
-Updated the entropy generator engine.
-Added entropy on/off switch option back.
-Fix bootloop on CM based roms.
-Optimized VM tweaks applying(Set VM Tweaks depending on RAM amount).
-Updated and optimized sqlite3 installation process.
-Added newest busybox binary.
-Updated the uninstaller.
-Many minor fixes.
Fly-On Mod™ V4.0 Alpha10:(15/08/2013)
-Some code improvements.
-Updated hosts file domains.
-Seperated installation of sqlite binary,flash the one according to your Android version,for example for ICS,flash sqlite_ICS package.
-Droped busybox causing root issues for some users.
-Fixed tunables for Dalvik VM.
-92logdelete1 script fixes/improvements.
-Renamed 92logdelete1 script to 92cleaner.
-Run optimising scripts every 30h.
-Update zipalign,sqlite3,openvpn and tune2fs binaries from fresh CM source.
-More 98fly_engine tweaks.
-Precise build.prop tweaking.
-Updated the uninstaller.
Fly-On Mod™ V4.0 Beta2:(17/08/2013)
-Stability fixes.
-Fixed bootloop that occurred for some few devices.
-Droped Kill media server script since It's only working on Android 4.2 and 4.3 .
-Droped tune2fs binary(it's still experimental,you'll find It on Alpha releases).
Fly-On Mod™ V4.0 Beta3:(24/08/2013)
-Fixed logging issues.
-Added darky_zipalign to Fly-On logging engine.
-Added zipaligndata script to Fly-On logging engine.
-Many Code improvements and typo fixes.
Fly-On Mod™ V4.0 Beta4:(31/08/2013)
-Fixed long boot time!
-Added New pre-built Fly-On Mod uninstaller,to uninstall the Mod type:
su
uninstaller
-build.prop battery tweaks.
-updater-script will not delete caches from now on!
-deleted some unused stuff.
Fly-On Mod™ V4.0 Beta5:(1/10/2013)
-Rebased on Beta3(much more stable)!
-Added uninstaller binary.
-Added New Fly-On main binary used to check if the files are correctly installed!
-Added back old 92cleaner script functions except /dev/log/main one.
-Fixed long boot time on beta3.
-Added back "wipe caches" function to avoid issues.
-Fixed a small recolonization issue on the new Fly-On binary.
Fly-On Mod™ V4.0 RC1:(17/10/2013)
-The first Fly-On Mod V4 Release Candidate build!
-Fixed some few remaining bugs.
-Scripts will now run every 24h since 90% of smartphones today need to be charged everyday!
-No experimental feature.
-Super stable!
Fly-On Mod™ V4.0 Beta6:(15/01/2014)
-First 2014 update!
-Android 4.4 KitKat is supported;tested and verified!
-Added Android 4.4 KitKat proper sqlite3 binary!
-Many imtprovements to 94Governor_tweaks script:
+Add support for Quad core CPUs.
+Optimized Ondemand and Ondemandx governors for better performance.
+Optimized conservative governor for more power saving.
+Deleted SmartassV2 tweaks as It's frequency dependent.
- 03media_server_killer script is back!
-Some improvements to 92cleaner script.
Fly-On Mod™ V4.0 Beta7:(09/06/2014)
-ram_manager:Change Minfree values according to the device's RAM amount.
-Update hosts.
-Update zipalign binary.
-92cleaner:small fix and run every 48h.
-Many improvements to 98fly_engine script:
+Add FS and VM tweaks.
+Add back net buffer tweaks.
+Let Android handle tcp_rmem and tcp_wmem itself.
+Dynamic tcp_timestamps status.
-New script: 91touchscreen used to force touch rendering and improve smoothness.
-Some minor other changes and bugfixes.
Fly-On Mod™ V4.0 Beta8:(12/06/2014)
-Edited space handling.
-Fixes to bus on Beta7.
-Added what was missing in beta7.
Fly-On Mod™ V4.0 Beta9:(18/06/2014)
-Fixed Fly-On binary permissions.
-Fly_engine:Added many new/old tweaks:
+I/O Tweaks.
+Kernel Tweaks.
+Additional FS/VM Tweaks.
-Many other things...
Fly-On Mod™ V5.0 Alpha1:(23/06/2014)
-It's Fly-On Mod V5.0,a fresh start.
-New Entropy engine,based on Ryuinferno's seeder,Big thank to him.
-New 09RW_turbo script,It replaces 09sdcardspeedfix and combines I/O related tweaks and sdcard ones too.
-Added logging engine to media killer script as it was missing.
-Fixed logging engine for 92cleaner script.
-Delete repeated lines on 98fly_engine script.
-Possible zipaligndata script fix,needs more testing.
-Some changes to 94Governor_tweaks script:
+Add abyssplug governor.
+Delete lulzactive governor as it's freq dependent.
+Full Quad core CPU support.
-Updated sqlite binary for gingerbread,(I'll upload the new binary later).
Fly-On Mod™ V5.0 Alpha2:(03/07/2014)
-Fixed bootloop issue that some users faced(needs more testing).
-Fix scripts and hosts files permissions.
-New zipalign script that combines both of zipalign scripts for data and system apps.
-New sqlite_optimize script.
-typo fixes.
Fly-On Mod™ V5.0 Alpha3:(10/09/2014)
-New DNS caching engine.
-New fstrim script:
Some Android users suffer from poor performance after some days/weeks of
heavy usage. This is due to a well-known TRIM bug affecting these
devices,so this lagfixer script is used to fix such a bug.
-Updated the hosts file,a lot of new domains added.
-Updated the zipalign binary.
-Fixed zipaligning permissions.
-Updated the updater-script .
-Updated the update-binary.
-Many minor fixes.
Fly-On Mod™ V5.0 Alpha4:(28/07/2015)
-BACK
-Added support for Android 5.x Lollipop.
-Governor tweaks : Added Hexa and Octa CPUs support.
-Updated the RAM manager.
-Updated the ADBlocker hosts file to the latest domains as of July 2015.
-Misc fly engine changes.
-Droped the renice tweak as it was unspecific.
-Edited interval between 2 runs for various scripts.
-Updated the "updater-binary" .
-Trimmed down and cleaned the scripts a bit.
Fly-On Mod™ V5.0 Alpha5:(30/07/2015)
-Various Fly engine changes:
+Fly engine : force hardware rendering.
+Fly engine : more kernel tweaks.
+Fly engine : disable more scheduler sleepers.
-Ram manager : add ZRAM tweak.
-Fixed the update binary issue.
-Misc Cleaner script changes.
Fly-On Mod™ V5.0 Alpha6:(3/08/2015)
-Added initial AROMA installer support !
-New Killer script, to replace media killer script.
-Ram manager : Added KSM tweak.
-Updated Entropy binaries for better performance and battery life.
-Updated the zipalign binary.
-Minor fix to Fly_engine .
-Deleted I/O scheduler tweaks as they were deadline specific, thanks to [email protected]
-delete Touchscreen script as it's not universal, and causing overheating issues
for some users; thanks to [email protected]
Fly-On Mod™ V5.0 Alpha7:(7/08/2015)
-Now you'll have an AROMA version of the Mod and a non AROMA one for userrs facing isntallation issues.
-Fixed entropy engine binary issue.
-New fstrim binary.
-Fstrim : Trim /preload too
-Fly engine : Lock launcher in memory(no more launchers redraws !).
-Misc cleaner addition.
Fly-On Mod™ V5.0 Alpha8:(11/08/2015)
-Fixed logging engine for Dns.
-Fixed zipalign binary for lollipop.
-Fly engine : set the VM heap size according to the device's RAM amount.
-Updated the Adblcoker.
-Included Busybox to the installation package.

Script Built For Android

Stock rom supported??
Sent Via Muffins
Thanks,
TechnoSavie
Nothing is true, everything is permitted​

technosavie said:
Stock rom supported??
Click to expand...
Click to collapse
Yes,But in condition to have a custom Kernel,look at the OP!

it will work in acei ?
edit: its working v.good

Hells Fusion 50 + Fly
Logcat On Boot:
View attachment result.txt

ronnieryan said:
Hells Fusion 50 + Fly
Logcat On Boot:
View attachment 1867694
Click to expand...
Click to collapse
Seems to have some problems with Custom roms That have Other init.d scripts.
Btw I did already test It on stock rom with custom Kernel and it worked!

Working great on GNU#5 Kernel on Evo-X3 rom with minimal amount of other scripts!

slaid480 said:
Seems to have some problems with Custom roms That have Other init.d scripts.
Btw I did already test It on stock rom with custom Kernel and it worked!
Click to expand...
Click to collapse
Bro im using
Stock ROM + Hells Fusion Kernel #50 + Fly
im not using custom ROM (Stock DXLL1)
BTW what custom kernel are u using?

ronnieryan said:
Bro im using
Stock ROM + Hells Fusion Kernel #50 + Fly
im not using custom ROM (Stock DXLL1)
BTW what custom kernel are u using?
Click to expand...
Click to collapse
Ah ok,Then is there any compatibility problems??
And about Kernel,it's not my phone,it belongs to my friend and he uses Maroc-OS kernel.

Xicor Yagami said:
Working great on GNU#5 Kernel on Evo-X3 rom with minimal amount of other scripts!
Click to expand...
Click to collapse
Ok,That's good thanks for the testing and confirmation!

can it be used with duos too?

JustInsAne aka CALIBAN666 said:
can it be used with duos too?
Click to expand...
Click to collapse
yes,I think there is no problem with it,but feel free to test it and report the result !

The most important question: is it compatible with CyanogenMod?

gadgetroid said:
The most important question: is it compatible with CyanogenMod?
Click to expand...
Click to collapse
Normally,It should work but feel free to delete all other custom scripts in the init.d folder and test mine!
This script was published for testing purpose so you people can test It before asking here.

In this script have...
# This script is only edited by me to improve it for S5360, credits goes to...
setprop dalvik.vm.heapsize 72m (64 is default,72 is too high for this hw)
/system/xbin/echo "4096"... (2048 is the best by far)
setprop windowsmgr.max_events_per_sec 60 (Refresh rate of gy is 60hz so the correct value is calculated by 60*1.5)
after reading,my conclusion...its pure copy-paste...no offence
But..
Have alot of commands overwriting others.....so its no "edited" for S5360

worx well on my jellynoid rom with percy #5 kernel,even on my duos with gingericejelly v2+compact kernel too. :good:

Android Revolution HD 1.0 | High Quality & Performance | I9505XXUAME2 | 4.2.2 Q/A

Hope we will see him soon with his rom. And hope we will be updated here in this thread by him.
All the best mike,

Details of the system:
Android 4.2.2 (Jelly Bean) - latest official firmware Samsung I9505XXUAME2
This is improved version of stock ROM - no visual changes!
Very fast, clean & stable!
Full Samsung TouchWiz Interface
Multi-language (WWE)
For Samsung Galaxy S4 (I9505)
Thanks to Samsung for the base firmware
Here are the details of the ROMs:
Removed software (CPU) rendering - full Snapdragon 600 (GPU) rendering
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
System check signatures enabled for system security and safety
Improved virtual memory management
Speed ​​optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All / system applications updated to latest available
All / data applications updated to latest available
Improved performance CPU governors
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
Fully de-odexed
init.d scripts (BusyBox run-parts) support
Auto init.d permissions Setting On boot
sysro / sysrw commands support
Excellent battery life!
Improved EXT4 performance
OpenVPN support
Most up-to-date system files permissions
Adobe Flash Player support
Support almost 24h a day
And many more ...!
Souce: http://www.androidworld.it/forum/mo...-performance-|-i9505xxuame2-|-4-2-2-a-108077/

[APP][4.0+] CPU and STORAGE Tweaks

CPU and STORAGE Tweaks app :
Free Version Link : https://play.google.com/store/apps/details?id=com.largical.stools
Donated Link : https://play.google.com/store/apps/details?id=com.largical.stools_paid
The Application require a few android permission, to elevate the performance of the device.. we don't save any user data's..
CPU and STORAGE Tweaks need superuser (a.k.a root) and also custom kernel.
With CPU and STORAGE Tweaks you can easily manage these tweaks:
- BLD - BLN - BLX
- CPU Governor - Custom Voltage
- Deepidle - Liveoc
- Max/min scaling frequencies - Touchwake
- CMLed - IO Scheduler
- Fast charge toggle - Change CPU Governor, I/O Scheduler and Clock Speed
- Not Killable Processes feature
- Customize SD read -Linux Kernel informations
- CPU Informations - Memory Informations - Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
NOTE:
If something bad happened mails us [email protected].. We will fix the problem.. PLEASE DON'T RATE 1* WITHOUT SEEKING OUR HELP....
Please click THANKS button to move head with my future works..........

[ABANDONED][OUTDATED][MOD][GB/ICS/JB] [Low-end Only] ULTIMA Speed-up Pack

Is your low-end device sluggish?
Many tweak packages may not be effective in other devices.
That's why, I've created the package for ALL LOWER ANDROID DEVICES.
Presenting, my....
ULTIMA SPEED-UP PACK
A Tweak Package for all Low-end Devices
================ Features: ================+ ALL NEW ULTIMA ENGINE!
(Set of tweaks from xda developers combined.
More Details in init.d Script inside the package.)
+ init.d Support
+ build.prop Tweaks by Various xda Developers
+ Blazing device speed
+ Decreases lags and increases read speed
at the same time.
+ Burning kernel tweaks
+ Pre-installed SManager (Your new FRIEND)
and V6 SuperCharger Script by @zeppelinrox.
+ Better Memory Management with fixed OOM
+ Crisp, Sharp Display both 2D and 3D so,
now you can play "moderate-to-heavy" Games
(Could be better with Chainfire 3D or GLTools!)
+ Saves more Battery Life and decreases
consumption.
================ How to install? ================
Simply Install using CWM or any STOCK or CUSTOM recovery,
(NOT RECOMMENDED FOR OPENRECOVERY and
some OEM Recoveries doesn't work properly)
and, TADA! Your device should be better than before!
================ WARNING! ================
For more details...
Please read the README file inside the package.
And i am not responsible for any relative damages
on your device if any case occurred.
================ BUT WAIT ================
Compatible only for
Android devices with 223-512MB of RAM.
NO GOOD FOR KITKAT and LOLLIPOP!
Are you using Link2SD partitions? you can install
it with my NO CLEAN edition if you don't want to wipe up
your dalvik-cache!
CREDITS
Most Thanked Developers for main engine!
@zeppelinrox and his incredibleV6 SuperCharger!
http://goo.gl/qM6yR
@ImbaWind for Adrenaline Engine!
http://forum.xda-developers.com/showthread.php?p=24390549
Other people invented their works and i thank to them.
@Jeeko @Aneel and other devs who discovered build.prop tweaks
@Stericson (for Busybox binary) @ArjunrambZ & @DeveDroid for some parts of TDT
@Spex from FLUID @kinechi / @kinechinxt from @NemesisX
@pikachu01 @iandol
@zacharias.maladroit
@voku1987 @collin_ph
​
​

Rescue package!!!
!!!!!!! DANGER !!!!!!!
Sorry for some users experienced smaller icons and interfaces, that's because...
I forgot to remove the "ro.lcd.density" property on your BUILD.PROP!!
I will remove it to the next update A..S..A..P!!!
OR kindly remove the "ro.lcd.density" property form your build.prop, restart and it should be okay!
In case of any bootloops...
THERE'S AN RESCUE PACKAGE AND FIND SOMEONE ELSE!​

README!!!
There's an README if you cannot find it in my package and it might be outdated...
Code:
+-----------------------------------------------------------------------------------+
ULTIMA SPEED-UP PACK 1.01
Readme
+-----------------------------------------------------------------------------------+
* Introduction
Many low-end phones today lacks both speed and multitasking
function because of limited kernel setups and
lower capacity of RAM, just an literal budget-level
right?!? That's why (as a low-end device user), I've created
an quick package with supercharged launcher,
more powerful and more speed, perfect for
mobile gamers and enthusiasts like me! :D
I don't know if it can run Asphalt 8 now, LOL!
* ULTIMA SPEED-UP Functions
+ init.d Support
+ Pre-installed SManager (Your new FRIEND)
and V6 SuperCharger Script by zeppelinrox.
+ Amazing Tweaks by various xda Developers
+ Blazing device speed like never before!
+ Decreases lags and increases read speed
at the same time.
+ Burning kernel tweaks
+ Better Memory Management with fixed OOM
which is it improves multitasking.
+ Crisp, Sharp Display both 2D and 3D so,
now you can play "moderate-to-heavy" Games
(Could be better with Chainfire 3D or GLTools!)
+ Saves more Battery Life and decreases
consumption.
* Requirements
- Rooted Android Device (2.3 to 4.2)
- SU and BUSYBOX must be present!
- Your ROM should be stock!
- Installed Custom Recovery (CWM/TWRP)
VERSION 3 and up (CWM)
- 220-512MB of RAM
(NOT RECOMMENDED FOR MORE THAN 700MB)
- Writable /system and /data partition
- Any File Manager with ROOT function support.
- At least 18MB of free space in /system and /data
- No any modifications/tweaks installed.
( Must uninstall other tweaks properly or
else it will BREAK the SPEED-UP! )
- And a latest NANDROID BACKUP
( Just because i'm not responsible for
any damages will occur on your device!
GOT IT??? :p )
* Installation
Install using CWM or any custom recovery.
( Must mount /system and /data first! )
Some actions are required which is you must
do some tricky things to consider!
Case #1:
Tweaking build.prop could not be updated
or lead into BOOTLOOP.
(Depending on your recovery and system)
- There's an extra file installed on your system
called "build_tweaks.prop", copy all text inside
that file into inside of "build.prop"
on your system.
NOTE: Must be the end of the line of your
build.prop!
- ALERT: There's an RESCUE PACKAGE OUT THERE!
or manually copy/paste your default
files using AROMA FILE MANAGER
(Available at xda and installed separately)
Case #2:
The SPEED-UP Setup might be break! Because it cannot be
install some files to make it more compatible.
- Check all scripts in order to work!
RUNNING SCRIPT IN PARTICULAR ORDER!
EVERY TIME YOUR DEVICE BOOTS!!!
( It can arrange accordingly by creating or
renaming alias or it's file name in SManager )
Set the scripts and binaries to boot!
Don't forget to tap SU/Skull icon!
Case #3:
If you are using Link2SD and installing large count of
apps, you an encounter this problem by clearing your
mess (such as dalvik-cache) in your phone to make
it more efficient.
BEFORE YOU JUMPSTART MY SPEED-UP:
- You must install the NO CLEAN edition...
Filename : update-**-SPEED-UP-PACK_NOCLEAN_1.10
(or manually edit my updater-script if you know it well)
and you must clean the mess manually.
NOTES:
+ The pre-installed V6 SuperCharger script version
was RC9 Update 11.
+ It will replace your current BUSYBOX
so make a backup properly.
* Result Analysis
In my own ZTE V793 can now run fast after the SPEED-UP!
Here some games that i'd test and analysed.
+---------------------------------------------------------------+
| Game | Before | After |
+---------------------------------------------------------------+
2Fuse Random Closes Running Smooth
But not on their
latest version!
-----------------------------------------------------------------
Asphalt 5 Random Closes Running Smooth
-----------------------------------------------------------------
Asphalt 6 Random Closes Running but it
occur random closes
depending on your
game version
-----------------------------------------------------------------
Asphalt 7 Closes every Run Running until the
Loading Screen
(Starting to Race)
-----------------------------------------------------------------
Asphalt 8 Closes every Run Running until the
Loading Screen
(Starting to Race)
-----------------------------------------------------------------
Brothers in Arms 2 Many Lags occurred Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
Candy Crush Saga Running until the Running but it
Loading Screen occur random closes
but not too much
-----------------------------------------------------------------
Despicable Me Super Lag... Running Smooth but
Minion Rush Random Closes Some lags occur
-----------------------------------------------------------------
GT Racing Many Lags occurred Running Smooth
Random Closes
-----------------------------------------------------------------
Need For Speed Super Lag... Running Smooth
Hot Pursuit Random Closes
-----------------------------------------------------------------
N.O.V.A. 2 Many Lags occurred Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
Piano Tiles Many Lags occurred Running Smooth
-----------------------------------------------------------------
Plants VS Zombies 2 Super Lag... Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
Real Football 2011 Many Lags occurred Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
Real Racing 2 Many Lags occurred Running Smooth
Random Closes
-----------------------------------------------------------------
Riptide GP Many Lags occurred Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
Undead Slayer Super Lag... Running Smooth but
Random Closes Some lags occur
-----------------------------------------------------------------
TRY ALSO THE PPSSPP Emulator with your
favourite PSP Game, and see the difference! :D
+---------------------------------------------------------------+
* Credits/Thanks to
@zeppelinrox
@LENAROX from RTMixManager
@Jeeko
@Aneel and other devs who discovered build.prop tweaks
@stericson (for Busybox binary)
@ArjunrambZ & @DeveDroid from TDT
@Spex from FLUID
@KINECHI / kinechinxt from @NemesisXperienceTeam
@pikachu01
@iandol
@zacharias.maladroit
@voku1987
@collin_ph
@ImbaWind
and...
Cool Developers of Crossbreeder, PurePeformancesX,
NXT Engine, and Adrenaline.
(Notify me if someone know the developers)
NOTE: I am not the one who made those scripts/tweaks
I'd distribute and packed along with their terms.
* Changelog
1.00
- Initial Release
- Recovery Script added
1.01
- Reworked Recovery Script
- Integrated V6 SuperCharger generated by my ZTE V793
- init.d Installation added
- build.prop Tweak Installation script added
- Added fixed su binary
- Added busybox binary with 322 applets
-
1.06 Beta
- Reworked Recovery Script and Binary to avoid error 0 and 6
- Removed OOM and MFK fixes from V6 SuperCharger
to make it more compatible
- Reworked init.d scripts
1.09 Beta
- Rescue Pack Created
- Reworked Installation Scripts
- Removed unused and incompatible scripts
- Removed su binary (SORRY FOR THOSE USERS I DESTROYED THEIR SUs)
- Disabling crucial tweaks to avoid bootloops (User Interaction)
1.10
- First Update Release
- Reworked Recovery Script
- Reworked build.prop Tweak Script
- Recreated Speedup Pack
- Complicated Scripts turned into one simple script,
the ULTIMA ENGINE to avoid incompatibility for
Stock ROMs and Kernels
- Replaced Package name
- Added Scripts from Adrenaline
- Added Scripts from Crossbreeder
- Added Miscellaneous Scripts from xda
- Reworked init.d Instalation Script
- Reworked remount Script
+-----------------------------------------------------------------------------------+
(c) 2014 jccultima | http://forums.xda-developers.com/jccultima | HIT THANKS!!!
+-----------------------------------------------------------------------------------+

I have a Samsung Dart.
Definitely helped

Can you make tweak for samsung j2 prime