END OF DEVELOPMENT! READ LAST POST!
Most of people won't own this phone because it is only available in Balkan countries.
But whatever,I have spent some time porting various custom ROMs to it and now I am making this thread!
For people who encounter soft bricks I will leave the stock firmware which is prerooted available to download!
This post will contain how to root this phone and install a custom recovery,the second post will contain all of the custom ROMs and bugs for some ROMs and the third one will contain how to restore the firmware to not make one very very long post.
To root:
1. Download the KingoRoot apk from this link:
https://root-apk.kingoapp.com/kingoroot-download.htm
2. Check your settings if Unknown sources is enabled,after you enable it go ahead and install the apk
3. Now it is very simple,open the app and press root,reboot your phone and you will be rooted!
To install custom recovery(recommended to install PhilZ instead of TWRP because of some random reason most ROMs you try to install on TWRP will show symlink errors) you have two ways:
First way(the easy way):
1. Download one of the two recoveries from the links below:
http://www.mediafire.com/download/719ms15k9mohyoz/TWRP_3.0.2-0_Recovery.img - this is TWRP 3.0.2-0,only MTP doesn't work(to locate your files you will need to go from /sdcard directory to /data/media directory)
http://www.mediafire.com/download/cuwn1g4zgl0y47c/TWRP_2.8.2.0_Recovery.img - use this older version of TWRP if the above version is giving you problems
http://www.mediafire.com/download/8h864710ov1r74x/PhilZ_Recovery.img - this is PhilZ recovery,this is the recommended recovery to use,the only thing you will need to do is go to Advanced Functions and change the sdcard location to /data/media from /data/media/0 (you just press the power button once you highlight that option) because it will not then show up your downloaded zip files
2. Download Flashify from the Play Store
3. Once in Flashify choose to install from other recovery image and choose the image you have downloaded
4. You should have recovery now!
To boot into recovery hold down volume up and power in the same time
If the first way didn't work here is an alternative way(and you do not need to be rooted to install the recovery by the way):
1. Download SP Flash Tool to your computer(firstly make sure you have the MTK drivers installed,and if you are running Windows 8 or above it is recommended to turn off Driver Signature Enforcement)
2. Download the stock firmware from the third post and extract it
3. Open SP Flash Tool and choose the scatter file from the stock firmware you have extracted
4. Press on the empty box where it would usually show where is the recovery located and find the downloaded img
5. Once that is done turn off your phone,press Download and just plug in your phone to the computer
6. Once it shows Download Ok try to boot into recovery and it should work!
Custom Logos(works also on any device with screen resolution od 540x960)(Screenshots attached):
https://www.mediafire.com/?ga088kbuttwuqxs - MIUI Boot Logo
https://www.mediafire.com/?0oqpm68va8idl3u - CyanogenMod Boot Logo
https://www.mediafire.com/?m97zqn9edm2esb2 - Marshmello Boot Logo
https://www.mediafire.com/?vsqmog0md864gdb - Jack U Boot Logo
https://www.mediafire.com/?sfhpie8hblx52ah - Stock Logo with "Powered by Android" on the bottom
Thanks to:
Ajit Guraya - he is the guy who made most of the ROMs so we can port them to our device!
Harry_ET - he also made some ROMs for the CherryMobile H870 which I managed to port!
Yuweng - he made the Easy PhilZ and TWRP 2.8.2.0 installers!
Also hit that Thanks button if this was useful in anyway!
Custom ROMs
This is the post which contains most of the ROMs I have ported to this device.
This contains most of the ROMs I have ported!
Some of them are not included because they are just too unstable,like Bluetooth,Camera and force closes on the same ROM cannot be ran properly!
ROMs with their seperate threads:
Orion OS - https://forum.xda-developers.com/android/development/rom-orion-os-t3556052
MIUI 8 - https://forum.xda-developers.com/android/development/rom-miui-8-v6-6-16-t3556925
CyanogenMod 11 - https://mega.nz/#!9slnHJbZ!yPvwFdKKTc4qJITWtSjfXtOApfZzMSii7OwX1qAm0Cg
Exodus ROM(Lollipop based,YouTube app doesn't play video,no games work,only installs on TWRP) - https://mega.nz/#!Y1kCFB4Q!9MKnzHPjGa3NMS5ymToU7pHbBDtykBQtYOIT8Di2Ec8
Doogee UI ROM - https://mega.nz/#!gxd2WBSY!kAMlyYrWLLeHrMjavylFPXAyZBI_vj_Rkxi5Vb4Gvpc
EMUI 3.0 - https://mega.nz/#!dtFQ2ByT!6aDzRsQFqGDdDqqnDdLgiIOKGktmT9YQm1BGtntHjmM
Flyme OS 4 ROM(camera doesn't work) - https://mega.nz/#!dtFQ2ByT!6aDzRsQFqGDdDqqnDdLgiIOKGktmT9YQm1BGtntHjmM
Hive OS - https://mega.nz/#!Y8EChJKJ!3M00zqNlp6_4kPqOKRUX21oRC848Vr0KFSK7wtKmE90
HTC Desire 820G+ ROM - https://mega.nz/#!Qx1mSIrI!wU6L2EGt04iwV4SVKXSJjdcGzybl70g9jGgLCZfm4ps
Lime Light ROM - https://mega.nz/#!h80lDJqT!1ri3TfMjNDDBfDvpzSSfELGaIQJBQfoT9IT0TNhxQCE
PussyFap ROM - https://mega.nz/#!NskRSAja!_jmmd6UpmUwI-IffgsLVYEIiiXumkuMgfcoa4_TcJOc
Stay OS v3 - https://mega.nz/#!R0NSzaib!Y-kWcc3yLfOXEIIV7r_PkWeKPeTCF4HTU6esdWjrF34
Xperia Z3 Clone ROM(shows fake storage) - https://mega.nz/#!F8cSxa6C!hV-JF9g6qwN7Ip-fKMnuy-wHJpz6-Cpi6QzIICLQm-g
Who is maintaining noa roms and twrp?
Sent from my SM-G930F using Tapatalk
bender_007 said:
Who is maintaining noa roms and twrp?
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
TWRP 3.0.2 I have ported from the CherryMobile H870,TWRP 2.8.2.0 was made by TWRP Easy Installer and PhilZ as well,no much hassle there.
I am going to maintain TWRP on my own,if a new version releases I will try to port it as fast as possible.but school will be an issue as well so there won't be a lot of frequent updates when the summer ends very soon.
If you mean maintaining custom ROMs then I will be maintaining some of them,for example the CandySiX ROM is maintained by Ajit Guraya on mtkroms.com and I have just ported that using the guide below,nothing special.
Restoring from soft-brick
So if anyone encountered a soft brick it is easy to solve it,just follow these steps:
1. Download the stock firmware files from here:
http://www.mediafire.com/download/ao29ker79575qze/NOA-H43-Stock-Firmware-Files.rar
2. Download SP Flash Tool if you don't have it already and make sure you have the drivers installed
3. Extract the firmware files
4. Open SP Flash Tool and choose the scatter file from the extracted folder.
5. Now for every single box choose the corresponding file(for example choose uboot.bin for uboot),and for recovery choose one of the custom recoveries(I will explain later why)
6. Make sure your phone is powered off,now press Download and just plug in your phone,and it will start flashing
7. Now when the flash is done unplug your phone and boot it up!
If your phone keeps on repeating the boot animation take out the battery and boot to recovery by holding volume up and power(that is why we flashed one of the custom recoveries because the stock one is in Chinese and hard to understand) and just navigate to Wipe Data & Factory Reset and reboot your phone.
ALSO: If you do restore to stock and you try to factory reset and it says "Cannot mount data partition" just restart the phone,Android will create it itself while booting for the first time
Can I get some feedback? Is anyone having problems with something? Come on m8 I know this phone probably only resides in Balkan countries and almost no one on XDA has it but at least someone who tried the recovery for example
BLE
Dinkec27 said:
Can I get some feedback? Is anyone having problems with something? Come on m8 I know this phone probably only resides in Balkan countries and almost no one on XDA has it but at least someone who tried the recovery for example
Click to expand...
Click to collapse
Pozdrav Dinkec! Imam ja taj noa h43, i proba sam nekoliko ovih romova. Pitanje, Da li ovaj telefon može hardverski ponesti BLE (bluetooth low energy)?
Coyotee2 said:
Pozdrav Dinkec! Imam ja taj noa h43, i proba sam nekoliko ovih romova. Pitanje, Da li ovaj telefon može hardverski ponesti BLE (bluetooth low energy)?
Click to expand...
Click to collapse
Prilicno sam siguran da ne može,usput je li imaš problema s nekim ROMom u vezi s GPSom i slično
EDIT: Ispričavam se,podržava hardverski,moja greška
Dinkec27 said:
Prilicno sam siguran da ne može,usput je li imaš problema s nekim ROMom u vezi s GPSom i slično
EDIT: Ispričavam se,podržava hardverski,moja greška
Click to expand...
Click to collapse
Ne, želim da bi mi gsm prepoznao BT HR BELT preko Strave, ali ne ide. Postoji ovaj program koji radi :
https://play.google.com/store/apps/details?id=com.pribble.htc.ble.hrm&hl=sl
Coyotee2 said:
Ne, želim da bi mi gsm prepoznao BT HR BELT preko Strave, ali ne ide. Postoji ovaj program koji radi :
https://play.google.com/store/apps/details?id=com.pribble.htc.ble.hrm&hl=sl
Click to expand...
Click to collapse
Koji ROM koristiš?
Trebam pomoč! Nekako sam pokvario data partition, Ne mogu ga više ni formatirati, ni mountati. Znaš možda kako bi rješio problem? Ne ide ni sa oni soft unbrick varijantom...
Coyotee2 said:
Trebam pomoč! Nekako sam pokvario data partition, Ne mogu ga više ni formatirati, ni mountati. Znaš možda kako bi rješio problem? Ne ide ni sa oni soft unbrick varijantom...
Click to expand...
Click to collapse
Trebao sam to stavit u OP al sam zaboravio,ako ne mozes formatirat data particiju nakon instaliranja stocka onda ne trebas radit factory reset jer zapravo ni ne postoji,pa Android dok se pali napravi tu particiju,morao sam to tako napravit inace bi ovaj mobitel bio stalno u bootloopu,a jel mozes uci u OS nakon instalacije stocka?
Ne, mogu samo da idem u PhilZ bootloader, ali ne mogu formatirati e:/data particije, tako da kad mi završi za install novi zip, onda nakon reboota ide u bootloop. Isto je u bootloopu, nakom vipe-a
Coyotee2 said:
Ne, mogu samo da idem u PhilZ bootloader, ali ne mogu formatirati e:/data particije, tako da kad mi završi za install novi zip, onda nakon reboota ide u bootloop. Isto je u bootloopu, nakom vipe-a
Click to expand...
Click to collapse
A jel se pali sa stock ROMom jer vidim da probavas instalirat neki ROM
evo mene, neakako sam došao u factory mode (vol- + power) i tam samo odabrao clear eMMc. Nakon toga sam došao u sistem, ali sada imam problem sa IMEI number (invalid IMEI). Imam neki backup kojeg sam uradio za philzcwm. Kako da dobim nazad IMEI nr. ?
Coyotee2 said:
evo mene, neakako sam došao u factory mode (vol- + power) i tam samo odabrao clear eMMc. Nakon toga sam došao u sistem, ali sada imam problem sa IMEI number (invalid IMEI). Imam neki backup kojeg sam uradio za philzcwm. Kako da dobim nazad IMEI nr. ?
Click to expand...
Click to collapse
Ovako,znaci izvadi bateriju iz mobitela i zapisi IMEI 1 i 2 na papir,onda skini MTK Droid Tools(usput mob mora bit rootan),otvori MTK Droid Tools i onda klikni ROOT i trebalo bi ti izbacit da trebas dozvolit MTK Droid Toolsu root,i dopusti. Nakon tog u Droid Toolsu klikni na IMEI/NVRAM i sad zapisi oba IMEI broja i klikni restore.
Ako to ne radi,prije ovog odi u SP Flash Tool i odi na Format i klikni start,pa nakon tog flashaj stock ROM i onda se vrati na ovo sa Droid Toolsom
Evo, uspjeo sam da ga vratim na original stanje. Prvo sam sa sp flash tool stavio novi nvram.img nakle toga IMEI je počeo raditi. Jedino što nisam sada imao slovenački jezik, je oni tvoj stock firmware nema slovenačkog. Nakon toga sam napravio restore system.img, kojeg sam na sreču imao, jer sam ga napravio prije svega dok sam počeo u philz cWM ju. Sad radi kako je radilo prije svega.. Hvala ti za info. Još uvijek me zanima ali se može nekako uraditi, da bi ovaj telefon prepoznao BLE bluetooth....
Coyotee2 said:
Evo, uspjeo sam da ga vratim na original stanje. Prvo sam sa sp flash tool stavio novi nvram.img nakle toga IMEI je počeo raditi. Jedino što nisam sada imao slovenački jezik, je oni tvoj stock firmware nema slovenačkog. Nakon toga sam napravio restore system.img, kojeg sam na sreču imao, jer sam ga napravio prije svega dok sam počeo u philz cWM ju. Sad radi kako je radilo prije svega.. Hvala ti za info. Još uvijek me zanima ali se može nekako uraditi, da bi ovaj telefon prepoznao BLE bluetooth....
Click to expand...
Click to collapse
Ne znam,ja nemam baš vremena to testirat,probaj sad na stock ROMu jer je tamo garantirano da nema buggova,i gledo sam da ako dode mobitel sa Android 4.3 i vislje da podrzava BLE hardverski i softverski pa bi trebalo radit s tim da ovaj mobitel dode s Androidom 4.4
As per the Forum Rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Dinkec27 said:
Ne znam,ja nemam baš vremena to testirat,probaj sad na stock ROMu jer je tamo garantirano da nema buggova,i gledo sam da ako dode mobitel sa Android 4.3 i vislje da podrzava BLE hardverski i softverski pa bi trebalo radit s tim da ovaj mobitel dode s Androidom 4.4
Click to expand...
Click to collapse
Coyotee2 said:
Evo, uspjeo sam da ga vratim na original stanje. Prvo sam sa sp flash tool stavio novi nvram.img nakle toga IMEI je počeo raditi. Jedino što nisam sada imao slovenački jezik, je oni tvoj stock firmware nema slovenačkog. Nakon toga sam napravio restore system.img, kojeg sam na sreču imao, jer sam ga napravio prije svega dok sam počeo u philz cWM ju. Sad radi kako je radilo prije svega.. Hvala ti za info. Još uvijek me zanima ali se može nekako uraditi, da bi ovaj telefon prepoznao BLE bluetooth....
Click to expand...
Click to collapse
Dinkec27 said:
Ovako,znaci izvadi bateriju iz mobitela i zapisi IMEI 1 i 2 na papir,onda skini MTK Droid Tools(usput mob mora bit rootan),otvori MTK Droid Tools i onda klikni ROOT i trebalo bi ti izbacit da trebas dozvolit MTK Droid Toolsu root,i dopusti. Nakon tog u Droid Toolsu klikni na IMEI/NVRAM i sad zapisi oba IMEI broja i klikni restore.
Ako to ne radi,prije ovog odi u SP Flash Tool i odi na Format i klikni start,pa nakon tog flashaj stock ROM i onda se vrati na ovo sa Droid Toolsom
Click to expand...
Click to collapse
Coyotee2 said:
evo mene, neakako sam došao u factory mode (vol- + power) i tam samo odabrao clear eMMc. Nakon toga sam došao u sistem, ali sada imam problem sa IMEI number (invalid IMEI). Imam neki backup kojeg sam uradio za philzcwm. Kako da dobim nazad IMEI nr. ?
Click to expand...
Click to collapse
Dinkec27 said:
A jel se pali sa stock ROMom jer vidim da probavas instalirat neki ROM
Click to expand...
Click to collapse
Coyotee2 said:
Ne, mogu samo da idem u PhilZ bootloader, ali ne mogu formatirati e:/data particije, tako da kad mi završi za install novi zip, onda nakon reboota ide u bootloop. Isto je u bootloopu, nakom vipe-a
Click to expand...
Click to collapse
Dinkec27 said:
Trebao sam to stavit u OP al sam zaboravio,ako ne mozes formatirat data particiju nakon instaliranja stocka onda ne trebas radit factory reset jer zapravo ni ne postoji,pa Android dok se pali napravi tu particiju,morao sam to tako napravit inace bi ovaj mobitel bio stalno u bootloopu,a jel mozes uci u OS nakon instalacije stocka?
Click to expand...
Click to collapse
Coyotee2 said:
Trebam pomoč! Nekako sam pokvario data partition, Ne mogu ga više ni formatirati, ni mountati. Znaš možda kako bi rješio problem? Ne ide ni sa oni soft unbrick varijantom...
Click to expand...
Click to collapse
Coyotee2 said:
Pozdrav Dinkec! Imam ja taj noa h43, i proba sam nekoliko ovih romova. Pitanje, Da li ovaj telefon može hardverski ponesti BLE (bluetooth low energy)?
Click to expand...
Click to collapse
Dinkec27 said:
Prilicno sam siguran da ne može,usput je li imaš problema s nekim ROMom u vezi s GPSom i slično
EDIT: Ispričavam se,podržava hardverski,moja greška
Click to expand...
Click to collapse
Coyotee2 said:
Ne, želim da bi mi gsm prepoznao BT HR BELT preko Strave, ali ne ide. Postoji ovaj program koji radi :
https://play.google.com/store/apps/details?id=com.pribble.htc.ble.hrm&hl=sl
Click to expand...
Click to collapse
Dinkec27 said:
Koji ROM koristiš?
Click to expand...
Click to collapse
Judge Joseph Dredd said:
As per the Forum Rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
Sorry but probably most of the people who have this phone speak my language so I thought it would be easier
Related
Hello everybody,
This is my first post. Some of the people here helped me alot with my device so I decided to give something in return...
THANK YOU : xda-developers.com, faria, Dr Puttingham, zoki and others I may forgot to mention!
This version of tutorial is v1 and final - from the collected material on different posts here on xda-developers forum. You may say that this is a "FOR DUMMIES" edition - STEP by STEP.
All the links from the tutorial are connected, and some of them even new ones.
Everything works, just follow tutorial carefully...
------------------------------------------
Link for tutorial in attachment / Link za uputstvo u prilogu
------------------------------------------
Pozdrav svima,
Ovo je moj prvi post ovde. Nekolicina ljudi mi je mnogo pomogla da sredim svoj uredjaj, pa ovim putem zelim da im se zahvalim i doprinesem neshto zajednici...
HVALA VAM : xda-developers.com, faria, Dr Puttingham, zoki i ostalima koje sam zaboravio da pomenem!
Ovo je prva verzija uputstva i konacna - sastavljena od materijala i uputstva nadjenih na xda-developers forumu. Moze se reci da je ovo verzija "ZA POCETNIKE" - KORAK po KORAK.
Svi linkovi unutar dokumenta su povezani, neki chak i novi dodati.
Sve radi, samo trebate pratiti pazhljivo uputstvo...
Hvala
Hvala Brate, spasio si me...
nema sta ima nas =)
svaka cast za trud =)
Hvala prijatelju.
Cao,
imam jedan problem sa Qtek-9100 aj sad da probam da objasnim o cemu se radi, prije nekoliko prilikom punjenja telefon mi je pao i dio koji je unutar mobila ( usb ) slomio se sad telefon radi i kupio sam punjac za bateriju ali interesuje me kako da ubacim bilo koji ROM preko sd kartice??
Unaprijed zahvalan
Igor
Druze svaka cast sto pomazes ljudima,inace vidim da je vecina vas upoznata dobro sa uredjajem tj, telefonom ovog tipa i stvarno po meni,....a probao sam sve i svasta i ono sto niko nije hteo...hehhehe...ovo je dosad jos naj zahvalniji uredjaj za licni customizing...i bilo kakve varijacije koje odstupaju od fabrickog...uglavnom puno pozdrava od dzoni2zr iz zrenjanina,samo tako nastavite,ako ikome nesto zatreba neka me slobodno mailuje na [email protected] ili cak neka pozove na 0644737241 bice mi drago ako mogu pomoci..imam na hardu svega i svacega za ovaj phon sto provereno radi
isprobavao licno i bio uporan do bola...romovi<soft i hard spl i ipl itd...itd...tako da budite mi dobri svi
hvala na uputstvu... mozda bismo trebali pokusati napraviti instalacioni paket s lokalizacijum (tastatura sa ČĆŽĐŠi ostali karakteri, MMS/GPRS podesavanja) ya nase prostore... ili cak prevesti windows...
pozzz iz BiH
can anybody try to explane me how to flash my qtek 9000 but on serbian or croatian language because my english is too bad and i cant understand guide witch ic here or upload first flashing and unlocking and other procedure on youtube.thanks
Delete thread
dzevadnp said:
can anybody try to explane me how to flash my qtek 9000 but on serbian or croatian language because my english is too bad and i cant understand guide witch ic here or upload first flashing and unlocking and other procedure on youtube.thanks
Click to expand...
Click to collapse
Once again please do not double or triple post
Respect the rules or you´ll get banned!!
dzevadnp said:
can anybody try to explane me how to flash my qtek 9000 but on serbian or croatian language because my english is too bad and i cant understand guide witch ic here or upload first flashing and unlocking and other procedure on youtube.thanks
Click to expand...
Click to collapse
ovako...prije napuni mobitel do kraja.baterija ti mora biti skroz puna.zatim stisni tipku "backlight" (sa malom "žaruljicom" sastrane) i "power" dugme,i dok to držiš resetiraj uređaj sa onom rupicom sastrane.tada će ti uređaj ući u "bootloader" mod.
odaberi ROM koji želiš staviti i priključi uređaj na USB na kompjuter.pokreni instalaciju i ostalo je sve automatski...
NAPOMENA !
Ako nisi vješt u tome,onda nemoj raditi jer si možeš pokvariti uređaj!! zato pazi što radiš !
.
tin2404 said:
ovako...prije napuni mobitel do kraja.baterija ti mora biti skroz puna.zatim stisni tipku "backlight" (sa malom "žaruljicom" sastrane) i "power" dugme,i dok to držiš resetiraj uređaj sa onom rupicom sastrane.tada će ti uređaj ući u "bootloader" mod.
odaberi ROM koji želiš staviti i priključi uređaj na USB na kompjuter.pokreni instalaciju i ostalo je sve automatski...
NAPOMENA !
Ako nisi vješt u tome,onda nemoj raditi jer si možeš pokvariti uređaj!! zato pazi što radiš !
.
Click to expand...
Click to collapse
interesuje me dali je potreban hard spl ili cid otkljucavanje ili nesto tome slicno kao na tytn1 ili 2 koje sam ranije imao. i sta je doc format. hvala
cini mi se da sam ti ja ranije objasnio da netreba ga splash-ovati nikako. samo skines ROM i uradis onoi sto ti je -tin2404 objasnio
vazi brate. porobacu pa taman ga u kantu bacio. hvala. pozdrav.
Hey guys
At least post a translation as english is the official languaje here, otherwise this thread can be closed!
ok.
tin2404 said: the same as the wiki
dzevadnp: i wonder is it necessary to hard splash UNI or do CID unlocking, and what is DOC Format
Me: i believe that i told you before that you don't need to hard splash the UNI, just download a ROM and do what tin2404 told you
dzevadnp: OK bro', i'll do it, even if i have to throw it in the trash can later
translation problem solved
damir-bosna said:
ok.
tin2404 said: the same as the wiki
dzevadnp: i wonder is it necessary to hard splash UNI or do CID unlocking, and what is DOC Format
Me: i believe that i told you before that you don't need to hard splash the UNI, just download a ROM and do what tin2404 told you
dzevadnp: OK bro', i'll do it, even if i have to throw it in the trash can later
translation problem solved
Click to expand...
Click to collapse
Thanks
It was not a problem is for respect to other non speaking members
Chhers,
thanks damir-bosna on translation
excuse other members and orb3000
Hello all guys,i buy Galaxy FIT,it's have 2.3.4 os and install custom rom,but now my phone stuck on boot screen,i try to flash with odin but odin not detect my phone,i install drivers and kies but still not detect.... I think i can found fix for my problem.. If you have guys original rom flashable zip,please upload me... Thank's in advance ! I realy don't now how to fix this problem.. Sorry for my very bad english..
Marko1997 said:
Hello all guys,i buy Galaxy FIT,it's have 2.3.4 os and install custom rom,but now my phone stuck on boot screen,i try to flash with odin but odin not detect my phone,i install drivers and kies but still not detect.... I think i can found fix for my problem.. If you have guys original rom flashable zip,please upload me... Thank's in advance ! I realy don't now how to fix this problem.. Sorry for my very bad english..
Click to expand...
Click to collapse
For CWM go in here:
http://forum.xda-developers.com/showthread.php?t=1339640
I used this Stock ROM:
https://hotfile.com/dl/150258349/ecfe6ae/S5670XWKTI_S5670DBTKT1_DBT.rar.html
If after install Stock ROM on boot screen, remove battery, and back battery in phone, press Home and Power button
for Recovery, in Recovery go on data reset, and reboot phone.
For install custome ROM in CWM, you need do wipe data/reset, wipe cashe partition, and in advanced, wipe dalvik cashe, before and after install custom ROM.
Hi,thank you i will try this.
Inace,da li si sa balkana? Vidim po "Hajduku"
Jel nema veze koji mi je 2.3.4 GB,ovo radi na svim jel da ?
U servisu su mi rekli da mi je crkla maticna ali ne znam kako su to presudili,kada se telefon pali na boot screen i ulazi u download mode i u recovery,jednio pc ne moze da ga nadje...
Marko1997 said:
Hi,thank you i will try this.
Inace,da li si sa balkana? Vidim po "Hajduku"
Jel nema veze koji mi je 2.3.4 GB,ovo radi na svim jel da ?
U servisu su mi rekli da mi je crkla maticna ali ne znam kako su to presudili,kada se telefon pali na boot screen i ulazi u download mode i u recovery,jednio pc ne moze da ga nadje...
Click to expand...
Click to collapse
Please write in English because of the other participants at the Forum. Send a message to me on the MP if you need help.
It's hard to say for motherboard memorized.
Find appropriate drivers for your phone to connect to the PC.
Official firmwares n flashing tut
http://forum.xda-developers.com/showthread.php?t=1533380
Při pokusu o root jsem si omylem zaškrtl více políček a vymyzal OS i přístupy.....posílám foto a prosím o radu...
Translation: When trying to root, I accidentally checked more boxes and deleted the OS and accesses ..... I am sending a photo and please for advice ...
I'd suggest you to put up a post in English as XDA is using English for all its content. You will receive most responses when everyone understands what you say.
You can use any translator site, Google Translate or Bing Translate or etc.
Thanks.
standa245 said:
Při pokusu o root jsem si omylem zaškrtl více políček a vymyzal OS i přístupy.....posílám foto a prosím o radu...
Translation: When trying to root, I accidentally checked more boxes and deleted the OS and accesses ..... I am sending a photo and please for advice ...
Click to expand...
Click to collapse
Hi,
you will have to start over. Download stock and flash it through Odin.
Don't download the last one, but the one that has the same bit. (maybe I take the first one that has bit 4).
Then log in to wifi and unlock the bootloader and turn on USB debugging.
Then you can start flashing / restoring the backup. For root, you basically just flash the kernel, if you only need stock ROM.
Ahoj,
budeš muset začít odznovu. Stáhni si stock Osdud a flashni ho pres Odin.
Hlavně nestahuj tu poslední, ale tu, která má stejný bit. (já třeba beru první co má bit 4).
Pak se přihlas na wifi a odemkni bootloader a zapni ladění ADB.
Poté můžeš začít flashovat / obnovovat zálohu. Pro root ti v podstatě stačí flashnout kernel, pokud ti stačí stock ROM.
Jo a můj předskokan má pravdu, tady piš raději anglicky. I nadpis.
Korny
Korny(CzE) said:
Hi,
you will have to start over. Download stock and flash it through Odin.
Don't download the last one, but the one that has the same bit. (maybe I take the first one that has bit 4).
Then log in to wifi and unlock the bootloader and turn on USB debugging.
Then you can start flashing / restoring the backup. For root, you basically just flash the kernel, if you only need stock ROM.
Ahoj,
budeš muset začít odznovu. Stáhni si stock Osdud a flashni ho pres Odin.
Hlavně nestahuj tu poslední, ale tu, která má stejný bit. (já třeba beru první co má bit 4).
Pak se přihlas na wifi a odemkni bootloader a zapni ladění ADB.
Poté můžeš začít flashovat / obnovovat zálohu. Pro root ti v podstatě stačí flashnout kernel, pokud ti stačí stock ROM.
Jo a můj předskokan má pravdu, tady piš raději anglicky. I nadpis.
Korny
Click to expand...
Click to collapse
will this version work with the galaxy SM-A750GN/DS?
in the site it says its for SM-A750FN
and does odin work with arch linux?
itamarBL8844 said:
will this version work with the galaxy SM-A750GN/DS?
in the site it says its for SM-A750FN
and does odin work with arch linux?
Click to expand...
Click to collapse
for you ... galaxyfirmware.com
I tried to flash a rom with twrp, flash swipe ok. then it doesn't turn on anymore, what should I do plss
use youtube for future reference
alleshi said:
usa youtube per riferimento futuro
Click to expand...
Click to collapse
O vllai shqiptar je , nuk di me fol anglisht mir un , E kam pa kte video ky shpiegon po ka nji file qe nuk gjehet jan me pages, problemi im esht se nuk ma njef pc telefonin si motorola po Qualcom-USB QDloader 9008 (COM4, kam installu driver po praf nuk e njef , a di nai comand adb o fast boot?
thank vlla
After the flash rom havoc os no longer lights up, what should I do plss help
I don't know what is going on with the device. Before I had a rom then I put the stock one so I wanted to put the rom back and it gave me an error with the data, the partition E: And with the verification
I have done all the steps that I have seen on the internet and nothing works for me.
Can anyone help me with a guide please