Related
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!
elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.
Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.
I just flashed the pacman nightly over cm11 using philz recovery. and my phone keeps trying to boot up. I get the moto logo for a few seconds then it goes blank and comes back up.
not sure where to begin fixing this. Ive tried to get back into recovery but cant.
any help would be appreciated
oscar the grouch said:
I just flashed the pacman nightly over cm11 using philz recovery. and my phone keeps trying to boot up. I get the moto logo for a few seconds then it goes blank and comes back up.
not sure where to begin fixing this. Ive tried to get back into recovery but cant.
any help would be appreciated
Click to expand...
Click to collapse
You dirty flashed it over CM11? You didn't wipe system, data, cache and dalvik? I always do that, even when I'm flashing an AOSP-based ROM over another AOSP-based ROM.
The only time I won't do this is if I'm flashing say CM11 over CM11.
If you dirty flashed, that might be your problem, but I don't know for sure as I don't use PacMan ROM.
I didn't dirty flash. Cm11 was on there before. I used philz wipe forfor new rom like I always do.
I can get into the fastboot menu. Is there something I can do there to reflash cm11?
oscar the grouch said:
I didn't dirty flash. Cm11 was on there before. I used philz wipe forfor new rom like I always do.
I can get into the fastboot menu. Is there something I can do there to reflash cm11?
Click to expand...
Click to collapse
Not sure then. I always use TWRP to wipe and flash. Could be an issue with the ROM itself or you got a bad download. You might want to try and download the ROM again to ensure it wasn't a bad download.
figured it out. must have had something happen to the recovery file.
in fast boot i flashed a new recovery image and was able to boot into recovery.
Maybe you have the JB bootloader and you flashed a KitKat bootloader based CM11 build... That could explain why your phone is not booting properly.
If nothing works you just can flash a STOCK FIRMWARE to begin again.
The phone has stock kitkat. How can I confirm?
joel_sinbad said:
Maybe you have the JB bootloader and you flashed a KitKat bootloader based CM11 build... That could explain why your phone is not booting properly.
Click to expand...
Click to collapse
That's a no-go. You won't be able to flash a KK-based ROM on a system with a JB Bootloader. The device will abort the installation immediately with a friendly reminder. At least the XT926. Been there, tried that.
^ agree. My atrix HD has a jbbl and I can Confirm this
Hey, so I just bought a Moto G LTE and got very excited about the amount of dev going on here (coming from an LG Optimus F6 which has almost none). Right way I unlocked the bootloader and rooted. So far so good. Then I flashed TWRP recovery and everything seemed fine. I downloaded the ParanoidAndroid ROM and flashed it, and the phone got stuck in a bootloop (with the PA boot animation). I then went back into recovery, did a reset and flashed BlissPop. Same issue (bootloop is now in the BP boot animation).
So now I'm not sure what to do. I can still get into recovery. I selected factory reset through recovery, and on the top of the screen it says "Factory Reset Complete", but on the log it says "Updating partition details..." and just stays like that. Rebooting just takes me back to the bootloop (still with the BlissPop animation).
Anyone have a clue what could be wrong here? Is there a way to check if there's anything I messed up along the way?
Thanks in advance for any help!
magnoidgoat said:
Hey, so I just bought a Moto G LTE and got very excited about the amount of dev going on here (coming from an LG Optimus F6 which has almost none). Right way I unlocked the bootloader and rooted. So far so good. Then I flashed TWRP recovery and everything seemed fine. I downloaded the ParanoidAndroid ROM and flashed it, and the phone got stuck in a bootloop (with the PA boot animation). I then went back into recovery, did a reset and flashed BlissPop. Same issue (bootloop is now in the BP boot animation).
So now I'm not sure what to do. I can still get into recovery. I selected factory reset through recovery, and on the top of the screen it says "Factory Reset Complete", but on the log it says "Updating partition details..." and just stays like that. Rebooting just takes me back to the bootloop (still with the BlissPop animation).
Anyone have a clue what could be wrong here? Is there a way to check if there's anything I messed up along the way?
Thanks in advance for any help!
Click to expand...
Click to collapse
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.
Pupet_Master said:
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.
Click to expand...
Click to collapse
Hey, thanks so much for the reply!
I'm not sure which exact version it is, is there a way to check without having to boot the phone?
I did the advanced wipe, however now when I click reboot it says "No OS Installed! Are you sure you want to reboot?" Now that I wiped the internal storage how do I flash the ROM (it was saved there and is now deleted)?
Thanks again.
magnoidgoat said:
Hey, thanks so much for the reply!
I'm not sure which exact version it is, is there a way to check without having to boot the phone?
I did the advanced wipe, however now when I click reboot it says "No OS Installed! Are you sure you want to reboot?" Now that I wiped the internal storage how do I flash the ROM (it was saved there and is now deleted)?
Thanks again.
Click to expand...
Click to collapse
You must always put the OS flash zip on a MicroSD card.
How ever you can put the USB cable on the PC at TWRP and it should reconize your phone so you can make a file transfer
YOu have done a nanobackup on a micro SD of your KitKat?
If you can't put the rom on a microSD Card (but i really advise you to do) or your PC wont see your phone on TWRP to copy the ROM there...
There is ADB Push
http://www.themobimag.com/install-rom-using-adb/
Good idea to use a microSD, don't know why I didn't think of that. I re-flashed from the SD and now everything works! Thanks so much for your help, really appreciate it!
magnoidgoat said:
Good idea to use a microSD, don't know why I didn't think of that. I re-flashed from the SD and now everything works! Thanks so much for your help, really appreciate it!
Click to expand...
Click to collapse
No problem m8, hope you enjoy the device
On an unrelated note: the one thing I love about my old phone is the stock music app. Is it possible to port it onto this one? I got the APK but when I try to install it it just says "Application not installed". Does this mean it's not possible to use it?
Pupet_Master said:
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.
Click to expand...
Click to collapse
Sence 7.0 ROM not working on Desire 820 Dual Sim
I followed one post on Dev ROM on this forum.
I tried installing the Sence 7.0 ROM on HTC Desire 820 Dual Sim and it installed without any problems but at the end when it asks for Reboot, phone restarted and got stuck in Bootloop.
Could you please help me resolve this problem?
You help will be really appreciated.
magnoidgoat said:
On an unrelated note: the one thing I love about my old phone is the stock music app. Is it possible to port it onto this one? I got the APK but when I try to install it it just says "Application not installed". Does this mean it's not possible to use it?
Click to expand...
Click to collapse
Prob it is not possible, you can try to make a titaniumbackup with said app, of this app and restore the backup on the new phone
---------- Post added at 04:56 ---------- Previous post was at 04:55 ----------
martin_kry said:
Sence 7.0 ROM not working on Desire 820 Dual Sim
I followed one post on Dev ROM on this forum.
I tried installing the Sence 7.0 ROM on HTC Desire 820 Dual Sim and it installed without any problems but at the end when it asks for Reboot, phone restarted and got stuck in Bootloop.
Could you please help me resolve this problem?
You help will be really appreciated.
Click to expand...
Click to collapse
This is not the HTC desire forum section, so i can't. Sorry
I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus
Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom
Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk
Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).
Very exited, good job
so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)
coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk
unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.
Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!
I run CM 13 and want to back to color os because it is not run so smooth. I format and then flash stock recovery image (then recovery) via twrp and reboot to stock recovery.
In stock recovery i wipe data and cache. That's problem come. Before finish, the screen goes black. I try to power on the device, back to wipe data then the screen goes to black again. I try to boot to recovery and fastboot but it remain the same, back to wipe data and then the screen goes to black..
I try repair it using msm tool but because my comp not recognize the device, i use QFIL. And then i can use the fastboot to boot stock recovery. Suceed. But no os inside. Try and error many times, i can power on the device at the end.
But now the other problem comes. My wifi and bluetooth not work. And message nv backup appear.
Flash project spectrum. Wifi and bluetooth work. I flash back to stock os. Wifi and bluetooth not work again..
May someone help me to solve the problem (make bluetooth and wifi work again)?
To get back to ColorOS from spectrum flash this rom from internal storage.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=41945
Sent from my R7plusf using XDA-Developers mobile app
uyab.com said:
I run CM 13 and want to back to color os because it is not run so smooth.
Click to expand...
Click to collapse
I think your initial problem was that you didn't flash open Gapps right after you flashed CM13.
Most users who are new to custom roms don't know that they have to flash Google apps separately.
kishd said:
To get back to ColorOS from spectrum flash this rom from internal storage.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=41945
Sent from my R7plusf using XDA-Developers mobile app
Click to expand...
Click to collapse
I use color os now. Have no problem bout back to color from spectrum. The problem occures after that. Wifi and bluetooth do not work.
celoxocis said:
I think your initial problem was that you didn't flash open Gapps right after you flashed CM13.
Most users who are new to custom roms don't know that they have to flash Google apps separately.
Click to expand...
Click to collapse
I flashed pico after flash CM. Pico TTS unfortunately has stopped. I use browser, unfortunately stopped. Facebook stopped. Camera stopped. That's the beginning of all the problem because after that i format the phone.
uyab.com said:
I flashed pico after flash CM. Pico TTS unfortunately has stopped. I use browser, unfortunately stopped. Facebook stopped. Camera stopped. That's the beginning of all the problem because after that i format the phone.
Click to expand...
Click to collapse
Did you boot into CM after flashing CM? and then installed Gapps later on? This could explain corrupted cache.
Always follow these steps on custom roms. (first time install not upgrade)
Boot into TWRP, select wipe/factory reset.
1. Install CM Rom
after that select the next zip (or add more zips to flash)
2. install Gapps.
Let it boot and setup your phone.
If you follow this you will never have a problem in CM.
Especially the R7 series. Every change to the code is closely tripled (even quadruple) checked by devs.
Because the R5, R7, R7Plus, R7S all share the same base and its tested in on every phone.
celoxocis said:
Did you boot into CM after flashing CM? and then installed Gapps later on? This could explain corrupted cache.
Always follow these steps on custom roms. (first time install not upgrade)
Boot into TWRP, select wipe/factory reset.
1. Install CM Rom
after that select the next zip (or add more zips to flash)
2. install Gapps.
Let it boot and setup your phone.
If you follow this you will never have a problem in CM.
Especially the R7 series. Every change to the code is closely tripled (even quadruple) checked by devs.
Because the R5, R7, R7Plus, R7S all share the same base and its tested in on every phone.
Click to expand...
Click to collapse
Of course not. I flash CM and after that i flash pico right away. Not yet boot into CM. After CM and pico install then wipe dalvik then reboot.
uyab.com said:
Of course not. I flash CM and after that i flash pico right away. Not yet boot into CM. After CM and pico install then wipe dalvik then reboot.
Click to expand...
Click to collapse
But did you wipe factory reset before flashing all the above? Coming from ColorOS. Else those errors can't be explained.
celoxocis said:
But did you wipe factory reset before flashing all the above? Coming from ColorOS. Else those errors can't be explained.
Click to expand...
Click to collapse
Yes. I wipe all but not the internal storage. Is it the cause? I do not know why twrp cannot read otg. So i put CM file on internal storage.
uyab.com said:
Yes. I wipe all but not the internal storage. Is it the cause? I do not know why twrp cannot read otg. So i put CM file on internal storage.
Click to expand...
Click to collapse
I don't know about the R7Plus TWRP. I don't maintain that TWRP. I know that my R7S TWRP works with OTG.
Internal storage should have been fine. I think it will stay a mystery why you received those errors.
celoxocis said:
I don't know about the R7Plus TWRP. I don't maintain that TWRP. I know that my R7S TWRP works with OTG.
Internal storage should have been fine. I think it will stay a mystery why you received those errors.
Click to expand...
Click to collapse
wish me luck. I will try your suggestion.
uyab.com said:
I use color os now. Have no problem bout back to color from spectrum. The problem occures after that. Wifi and bluetooth do not work.
Click to expand...
Click to collapse
Once back on ColorOs from Spectrum. Flash this older version of ColorOs and then CM everything including bluetooth should work fine.
https://www.dropbox.com/s/xmh77xyinz2iero/R7plusfEX_11_OTA_012_all_201512251816.zip?dl=0
kishd said:
Once back on ColorOs from Spectrum. Flash this older version of ColorOs and then CM everything including bluetooth should work fine.
https://www.dropbox.com/s/xmh77xyinz2iero/R7plusfEX_11_OTA_012_all_201512251816.zip?dl=0
Click to expand...
Click to collapse
Oya.. Let me try it..
Solved. WiFi and Bluetooth work fine. Run smooth in CM.
uyab.com said:
Solved. WiFi and Bluetooth work fine. Run smooth in CM.
Click to expand...
Click to collapse
Which method fixed the issue in the end?
Maybe bad repaired or bad flashing. Persist folder is empty. Thats why i can not install CM and unvailable wifi and bluetooth address. So flashing persist.img after remove the old one.
uyab.com said:
Solved. WiFi and Bluetooth work fine. Run smooth in CM.
Click to expand...
Click to collapse
hi sir im having the same problem with my R7 plus can you help me
i already flash my phone using QFIL with Oppo_R7_Plusf_EX_11_A.15_160612_By(GsmTechSupport)
result is only OPPO Logo
flash the phone with Msm8x38 with Oppo_R7_Plusf_EX_11_A.15_160612_By(GsmTechSupport)
result is phone will boot normal but the problem is same with your problem with WIFI and Bluetooth also appear something with NV partion but can be manage with *#268# but with wifi and bluetooth i cant solve
please help me.
thank you in advance
I'm so sorry. I just log in after a long time and read your problem. Have you solved the problem?
same problem for me, no wifi and no bluetooth after flashing stock rom.
Any idea?
uyab.com said:
Maybe bad repaired or bad flashing. Persist folder is empty. Thats why i can not install CM and unvailable wifi and bluetooth address. So flashing persist.img after remove the old one.
Click to expand...
Click to collapse
hello,
please ask me where to find persist.img and the method for flashing it.
thanks in advance