So I have a S7 I rooted and I had a problem with a ROM so I flashed Stock ROM but then it said a DRK Error. I fixed it flashing TWRP and encryption disabler. But my IMEI was gone so I took in to a service center where they reset it. They reset it and got the same DRK Error so I brought it home to flash TWRP again, but then I realized FRP Lock was on from resetting and now I can't flash any custom binaries and my phone still can't boot. (Situation : No boot, No IMEI, No Custom Binary Flashing, Yes Recovery and Download mode access) What can I do?
ay0503 said:
So I have a S7 I rooted and I had a problem with a ROM so I flashed Stock ROM but then it said a DRK Error. I fixed it flashing TWRP and encryption disabler. But my IMEI was gone so I took in to a service center where they reset it. They reset it and got the same DRK Error so I brought it home to flash TWRP again, but then I realized FRP Lock was on from resetting and now I can't flash any custom binaries and my phone still can't boot. (Situation : No boot, No IMEI, No Custom Binary Flashing, Yes Recovery and Download mode access) What can I do?
Click to expand...
Click to collapse
Hi mate
Have you checked this thread?
MAX 404 said:
Hi mate
Have you checked this thread?
Click to expand...
Click to collapse
yes its for G930F models and flashing the file via odin fails.
ay0503 said:
yes its for G930F models and flashing the file via odin fails.
Click to expand...
Click to collapse
Hi
What model S7 do you have? what are you flashing with Odin?
MAX 404 said:
Hi
What model S7 do you have? what are you flashing with Odin?
Click to expand...
Click to collapse
I have a S7 SM-G930S Korean SKT Model. I'm trying to flash a factory binary but now I have a FRP lock so i can't flash anything custom
ay0503 said:
I have a S7 SM-G930S Korean SKT Model. I'm trying to flash a factory binary but now I have a FRP lock so i can't flash anything custom
Click to expand...
Click to collapse
FRP usually has to do with your google account password........
Related
Hello all,
I am receiving tomorrow my new Samsung S6 and i want to know some things.
- Unlocking bootloader (how to and link?) - have searched a bit and you need ODIN. but what is the best version etc
- Installing TWRP3.0 (how-to) - where to find the latest TWRP for samsung s6
And than one of the most important question, is there a stock android that doesent have any buys and fc's????
Bootloader is not locked on S6 (except AT&T variant)
You can get latest ODIN from here;
http://dl.sammobile.com/Odin3_v3.10.7.zip
If you want to install TWRP on it;
1- Update it to Marsmallow if you haven't
2- Install this TWRP via ODIN;
http://arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
3- Boot up to TWRP and flash this ZIP before do anything on TWRP;
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
forumber2 said:
3- Boot up to TWRP and backup your unmodified stock ROM before do anything on TWRP;
4- flash this ZIP
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
Click to expand...
Click to collapse
Wouldn't this order make more sense so he had a backup in case something goes wrong?
Also, here are the threads for TWRP and SuperSU for the S6 on XDA:
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
http://forum.xda-developers.com/galaxy-s6/orig-development/cf-auto-root-t3056630
djbosanac said:
And than one of the most important question, is there a stock android that doesent have any buys and fc's????
Click to expand...
Click to collapse
No, and there probably won't be any for a long time, but there are lots of TouchWiz-based custom ROMs.
so basicly i dont need any customezation? because you telling me there will not be released a custom stock rom? Even a CM13 rom
thats poor services!
Uhm
djbosanac said:
so basicly i dont need any customezation? because you telling me there will not be released a custom stock rom? Even a CM13 rom
thats poor services!
Uhm
Click to expand...
Click to collapse
Correct. The only custom ROMs availability now and the foreseeable future are based on TouchWiz, not AOSP Android or CyanogenMod.
CafeKampuchia said:
Wouldn't this order make more sense so he had a backup in case something goes wrong?
Click to expand...
Click to collapse
He need dm-verity disabled boot image for working TWRP backups. That's why I suggest him to install this ZIP.
While reading topics on the internet (google)
If you THE smartphone update to 6.0 you do not need to unlock the bootloader. is this correct?
For now i will not use TWRP because there isent a proper ROM for the S6. is this because the exynoss CPU? because QSD cpu's have always the better support for CM..
djbosanac said:
While reading topics on the internet (google)
If you THE smartphone update to 6.0 you do not need to unlock the bootloader. is this correct?
For now i will not use TWRP because there isent a proper ROM for the S6. is this because the exynoss CPU? because QSD cpu's have always the better support for CM..
Click to expand...
Click to collapse
As I said before, there's no bootloader unlock because bootloader is factory-unlocked on Samsung devices.
If you want root, you should to use TWRP for install the latest SuperSU.
Yes, there's no CM ROM for Exynos 7420 right now. Maybe in future? Who knows...
is there a twrp that works because the original twrp that i download form twrp.me isent working getting a weird issue: recovery is not seandroid enforcing
djbosanac said:
is there a twrp that works because the original twrp that i download form twrp.me isent working getting a weird issue: recovery is not seandroid enforcing
Click to expand...
Click to collapse
It is not an issue, it is just a warning. I wrote what you need to do at first reply;
forumber2 said:
Bootloader is not locked on S6 (except AT&T variant)
You can get latest ODIN from here;
http://dl.sammobile.com/Odin3_v3.10.7.zip
If you want to install TWRP on it;
1- Update it to Marsmallow if you haven't
2- Install this TWRP via ODIN;
http://arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
3- Boot up to TWRP and flash this ZIP before do anything on TWRP;
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
Click to expand...
Click to collapse
i tried to install it, used the AP method in Odin.
But when i want to go in TWRP recovery i get the stock recovery! How to solve this issue
I'm having this issue as well on the T-Mobile variant. I have tried the unchecking auto reboot option in Odin and manually going to recovery. When I successfully flash according to Odin, I can't not get past the Recovery is not Seandroid enforcing boot.
SuddenGun007 said:
I'm having this issue as well on the T-Mobile variant. I have tried the unchecking auto reboot option in Odin and manually going to recovery. When I successfully flash according to Odin, I can't not get past the Recovery is not Seandroid enforcing boot.
Click to expand...
Click to collapse
where you able to figure this out? same problem. I can flash the twrp via ODIN, but get stuck on the "recovery is not seandroid enforcing" message. It just freezes on that.
help anyone? what should I be looking at? BL, Modem? I flashed original MM .tar file already...
I have a 920t (galaxy s6 non-edge tmobile)
piotrus22 said:
where you able to figure this out? same problem. I can flash the twrp via ODIN, but get stuck on the "recovery is not seandroid enforcing" message. It just freezes on that.
help anyone? what should I be looking at? BL, Modem? I flashed original MM .tar file already...
I have a 920t (galaxy s6 non-edge tmobile)
Click to expand...
Click to collapse
I did figure this out, check this post for how I did it.
I flash the stock rom ,it says I need to install DRK first .It says custom binary (recovery) locked by FRP when I flash TWRP .It's a endless loop. What can I do ?How can I solve it ? I'm going crazy :crying:
I have the same issue here G920T.
I saw both of us sailing in the same boat.
skyalchemist0 said:
I have the same issue here G920T.
Click to expand...
Click to collapse
:crying::crying::crying:
Who can help me pls?
I think you need ENG file or SW Capture
chenquanzhi said:
I flash the stock rom ,it says I need to install DRK first .It says custom binary (recovery) locked by FRP when I flash TWRP .It's a endless loop. What can I do ?How can I solve it ? I'm going crazy :crying:
Click to expand...
Click to collapse
Can you brief information about your phone
Model number?
What is the condition of your phone just after flash completely stock fimrware?
Br
Shahzaib Jahangir
The bodhi said:
I think you need ENG file or SW Capture
Click to expand...
Click to collapse
I also think so and I have searched for a few days in google.My phone model is SM-G930L .I just found the ENG file for 930F and it is useless for me.
Shabby The Dev said:
Can you brief information about your phone
Model number?
What is the condition of your phone just after flash completely stock fimrware?
Br
Shahzaib Jahangir
Click to expand...
Click to collapse
My phone is SM-G930L. After falshing completely stock fimrware,,it says I need to install DRK first and cant flash any custom rom or kernel because of FRP lock.
chenquanzhi said:
My phone is SM-G930L. After falshing completely stock fimrware,,it says I need to install DRK first and cant flash any custom rom or kernel because of FRP lock.
Click to expand...
Click to collapse
To solve this you want ENG boot or special firmware to boot your phone and enable oem unlocking
Search for s7 eng boot root
S7 qualcomm boot img
Br,
Shahzaib Jahangir
Shabby The Dev said:
To solve this you want ENG boot or special firmware to boot your phone and enable oem unlocking
Search for s7 eng boot root
S7 qualcomm boot img
Br,
Shahzaib Jahangir
Click to expand...
Click to collapse
I also think so and I have searched for a few days in google .I just found the ENG file for 930F and it is useless for me.
Accidentally deleted all files(system,efs etc. ) using twrp recovery. I didn't backed up before formatting all things. So I made backup of everything like system , efs etc. From another J700F mobile And restored in my j700F mobile.After that restoration I'm getting error of DRK not found / dm - verity check failed / flash eng binary then drk . My phone is in warranty but because of root knix tripped and warranty void.any solution ?
I got my real imei back but While dialing *#06# Imei shown but S/N not showing. Help Me !
SmartSwitch is your friend
Sent from my SM-A520F using XDA-Developers Legacy app
Not Working
dodo2244 said:
SmartSwitch is your friend
Sent from my SM-A520F
Click to expand...
Click to collapse
Dear Friend,
I used smart switch which didn't fixed my problem. I also downloaded latest firmware from sammobile and flashed with odin but this method also failed to fix my problem.
I think Combination files can solve my problem but I am unable to find latest combination files (Marshmallow)
I think there is no solution for my problem
jbrar123 said:
I think there is no solution for my problem
Click to expand...
Click to collapse
Lollipop.
COMBINATION ROM DOWNGRADE FRP GOOGLE ACCOUNT Samsung Galaxy J7 SM-J700F REPAIR DRK dm-verity
http://www.mediafire.com/download/s...02935_QB8107904_REV00_user_mid_noship.tar.md5
Downgrading Not possible from marshmallow to lollipop....I think :crying:
jbrar123 said:
Downgrading Not possible from marshmallow to lollipop....I think :crying:
Click to expand...
Click to collapse
Did you try?
ashyx said:
Did you try?
Click to expand...
Click to collapse
Error SW REV check failed something like this before I tried to flash lollipop on my mobile.I downloaded firmware from sammobile.
jbrar123 said:
Error SW REV check failed something like this before I tried to flash lollipop on my mobile.I downloaded firmware from sammobile.
Click to expand...
Click to collapse
Yes, but did you actually try this firmware. This is not standard firmware.
What build is your firmware?
ashyx said:
Yes, but did you actually try this firmware. This is not standard firmware.
What build is your firmware?
Click to expand...
Click to collapse
ANDROID VERSION - 6.0.1
BASEBAND VERSION - J700FXXU33BPJ4
Build Number - MMB29K.J700FXXU3BPJ3
ANDROID SECURITY PATCH - 1 OCTOBER,2016
Anyone of you have 4files repair firmware for J700F Marshmallow because I'm on marshmallow????
Thanks in advance..
ashyx said:
Lollipop.
COMBINATION ROM DOWNGRADE FRP GOOGLE ACCOUNT Samsung Galaxy J7 SM-J700F REPAIR DRK dm-verity
http://www.mediafire.com/download/s...02935_QB8107904_REV00_user_mid_noship.tar.md5
Click to expand...
Click to collapse
This files shows error in odin. Odin shows an error ERROR : INVALID md5 binary
jbrar123 said:
This files shows error in odin. Odin shows an error ERROR : INVALID md5 binary
Click to expand...
Click to collapse
What did you use to extract the rar archive? I suggest you use 7zip.
ashyx said:
What did you use to extract the rar archive? I suggest you use 7zip.
Click to expand...
Click to collapse
I used Winrar
ashyx said:
What did you use to extract the rar archive? I suggest you use 7zip.
Click to expand...
Click to collapse
Using 7zip same error displayed..
jbrar123 said:
Using 7zip same error displayed..
Click to expand...
Click to collapse
Are you able to extract the contents of the md5 with 7zip?
If so just remove the md5 extension.
ashyx said:
Are you able to extract the contents of the md5 with 7zip?
If so just remove the md5 extension.
Click to expand...
Click to collapse
No, I already tried this by removing .md5 I am not able to open with any archiever. I think this firmware file has problem....
DRK Not FOUND Install Eng Binary First then Install Drk
jbrar123 said:
Accidentally deleted all files(system,efs etc. ) using twrp recovery. I didn't backed up before formatting all things. So I made backup of everything like system , efs etc. From another J700F mobile And restored in my j700F mobile.After that restoration I'm getting error of DRK not found / dm - verity check failed / flash eng binary then drk . My phone is in warranty but because of root knix tripped and warranty void.any solution ?
I got my real imei back but While dialing *#06# Imei shown but S/N not showing. Help Me !
Click to expand...
Click to collapse
Fixed Problem of S/N by myself but drk problem is still there...
I have same problem
I have same problem DRK file for SM-J700f ids not found
Hi
I tried to change my firmware by flashing a stock firmware from the STOCK FIRMWARE thread.
I got an error msg saying Custom Binary Blocked by FRP and I am not able to boot up now.
Before you ask me
The phone's model is G955-F (it is network locked to 3IE)
I have tried to restore using smasung smart switch it gives me the same error
I have tried used odin to restore the stock firmware which was in device before.
Can someone please help me?
rishab_s said:
Hi
I tried to change my firmware by flashing a stock firmware from the STOCK FIRMWARE thread.
I got an error msg saying Custom Binary Blocked by FRP and I am not able to boot up now.
Before you ask me
The phone's model is G955-F (it is network locked to 3IE)
I have tried to restore using smasung smart switch it gives me the same error
I have tried used odin to restore the stock firmware which was in device before.
Can someone please help me?
Click to expand...
Click to collapse
That's probably because you hadn't unlocked your bootloader. The Odin restore method will work, I have done it myself, make sure you select all of the files required in Odin. Sammobile have the 3IE firmware, get version G955FXXU1AQDD
daveuk87 said:
That's probably because you hadn't unlocked your bootloader. The Odin restore method will work, I have done it myself, make sure you select all of the files required in Odin. Sammobile have the 3IE firmware, get version G955FXXU1AQDD
Click to expand...
Click to collapse
I have already tried that.
rishab_s said:
I have already tried that.
Click to expand...
Click to collapse
This could sound like a really dumb suggestion but remove your google account and retry. Could it be the factory reset protection?
Sent from my SM-T810 using Tapatalk
I returned it, will be getting a refund and will buy another one
I have the exact same problem with my SM-G955F
It has FRP lock on it
It originally could boot up, but then the google screen would ask for a password
I then went to try and flash TWRP on it which did not work
I then tryed to install the samsung stock firmware for android 8.0.0 which brings up "Custom Binary(RECOVERY) Blocked by FRP Lock"
I dont know the password, so could not enter one
I only have access to the Download screen on the phone
Flashed AP "AP_G955FXXU1CRB7_CL12993656_QB17006520_REV00_user_low_ship_meta.tar.md5"
ON PHONE SCREEN IN DOWNLOAD MODE: KERNEL REV. CHECK FAIL. DEVICE:11, BINARY:1
What can i do to remedy this ?
I got the "custom binary boot blocked by frp lock" issue so I gotta reflash the stock firmware, which I should have since I did a full TWRP backup so if I convert my twrp backup in to a flashable zip will i be able to flash it through ODIN? (obviously i cant do it through TWRP Recov since I can only access download mode)
I can get the stock firmware from sammobile.com but its going to take like 4h+ to download and I dont have time for that
izou1838 said:
I got the "custom binary boot blocked by frp lock" issue so I gotta reflash the stock firmware, which I should have since I did a full TWRP backup so if I convert my twrp backup in to a flashable zip will i be able to flash it through ODIN? (obviously i cant do it through TWRP Recov since I can only access download mode)
I can get the stock firmware from sammobile.com but its going to take like 4h+ to download and I dont have time for that
Click to expand...
Click to collapse
Had the same issue. Rookie mistake. I accidentally left the developer option OEM unlock disabled and viola! Had to do a reset. Also, if you had any fingerprints while using the Rom you used, You might come into issues when resetting using Odin. You might have to format your internal memory using TWRP. Im not saying its something slcertain. I just had to. The only firmware I had available was a 6.0.1 MM stock Rom and I came into issues when unlocking the phone. Remember, this was a full reinstall in Odin and the screen was locked. When I unlocked the screen it would just reboot. So, lesson learned. Make sure if you go and root your phone again never ever, ever, ever disable that option in developer.
But try it. You can follow the steps from the root guide for nougat in the threads and go up until the step where you install TWRP. Boot into TWRP and see if you can restore the backup. Chances are it might work without having to do the extra steps like reinstalling the stock firmware. If that doesn't work and you run into issues in TWRP you might need to reinstall everything from scratch again.
Thanks! Already figured it out ?
please explain
izou1838 said:
Thanks! Already figured it out
Click to expand...
Click to collapse
my note 5 is at custom binary blocked by frp lock. i think I also turned off the option of oem unlock in developers option by mistake.
I have twrp back up on pc only. please help me how to unbrick the phone now.
Unfortunately the TWRP back is no help ):
However if you have the stock full system image you can just flash that through ODIN and then re-root? easy fix.
Look for the image here in XDA I've seen it
Sir i have note 5 with csc n920pvps3bpk1 shows in phone aftar dialing *#1234# but on the box of this cell phone is printed as n920fvps3bpk1 and n9200 will u plz tell me which csc is correct and i want to upgrade it to 7.0 and its knox waranty has voided.
izou1838 said:
I got the "custom binary boot blocked by frp lock" issue so I gotta reflash the stock firmware, which I should have since I did a full TWRP backup so if I convert my twrp backup in to a flashable zip will i be able to flash it through ODIN? (obviously i cant do it through TWRP Recov since I can only access download mode)
I can get the stock firmware from sammobile.com but its going to take like 4h+ to download and I dont have time for that
Click to expand...
Click to collapse
Hi, I have the same problem with an SM-520F, did you manage to solve it?