Tried to apply a custom rom to phone and didn't realize FRP Lock was enabled. Phone now doesn't have a ROM installed and on startup just have the "Error has Occured Screen". I tried to use smartswitch pc software but it doesn't support the Samsung J120 device I have.
Hoping at worst I can get back to stock rom.
Just an update, the only thing I can do is go into download mode. But with the FRP lock enabled I don't believe I can do anything but any help to fix the issue if possible would be appreciated.
OP reposted in the correct section:
http://forum.xda-developers.com/general/rooting-roms/help-bricked-phone-t3445182
Thread closed.
Related
Hi.
i have been on every thread i found with the same kind of title, or that the search engine found but i cant relate to those problems since everyone has been fiddling with their phones in order to get this message.
i was updating my samsung xcover vith kies when the update failed (due to bad cable) now i get the error message on my phone
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
i read somewhere that this is "download mode" but im not shure and i dont really know what to do here.
kies wont connect with the phone and the phone wont appear in the recovery tool.
any help would be great!
The phone i have is a Galaxy Xcover with stock firmware
Any help would be great!
Thank you on beforehand
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
i got this problem too!
you can try to put the good drivers (samsung mobiles) on your computer.
i had the same problem but i flash it back to stock
flash your phone back to the stock rom that the phone came with that is the way i went with my problem and it worked.
Hi,
Knock on is not working on my LG g2 from past 2 days. I tried factory reset knock on/off toggle, device test, calibrate sensors. Finally I decided to return the phone but I need to unroot it for that.
As I cannot follow the usual process because my phone is not recognized in download mode via USB (both pc/linux) I tried installing a stock rom(80020k) and then uninstall the root. also I replaced the rtc files and the I tried to update the phone to D80020u but it fails with error saying device is suspected of rooting.
I became over smart and flashed a stock recovery which won't function.
No root, No recovery now. Tried rooting with ioroot25 doesn't work because it requires a functional stock recovery.
Any help/suggestions that can get me back to stock?
Thanks.
Hi,
The purpose of XDA assist is to help people find their way. And as you previously posted a duplicate thread to this in your devices forum section, you have already found your way.
Please be patient and wait for help in that thread. Or search and browse through your devices forum section for other similar threads.
Good luck!
Hey!(Sorry bear with me i'm a newbie )
So, a while back i rooted my phone using Ping-pong root and after a while i un-rooted it, Using theSuperSu unroot function.After,that whenever i got an OTA update to 5.1.1 and tried to install it the phone failed to do it and asked me to use smart switch.
I did as it told me to and tried upgrading from smart switch.Even smart switch tried and failed to update the firmware and now i'm stuck with a caution screen saying "An error has occurred while updating the device software.Use emergency recovery function in the smart switch PC software".
I've tried doing that a several time and haven't had any luck.Then, i tried flashing the stock firmware using odin,It kept failing.
Please help!I'm going MAD!
Thanks in advance
Hi!
I see you've posted in your devices Q&A section before, and that is where to ask about this.
XDA Assist is here to help navigate the site, not for support.
Good luck!
hello,
i have a problem with my s6 edge since last week.
i gave my phone to someone and when i got it back the sim card was not working,(i made some research and i noticed that the Efs was damaged). i then tried to use Kies to restore the phone. After the restoration (Android 6.0.1) , the phone tried to boot and i got this error: " dm-verity verification failed, need to check DRK first... ". i then began my research again and i founded one solution on youtube " a file that i had to flash via odin " . I then decided to try it out , and when i tried it failed, i receive that error: " Custom binary blocked by FRP Lock " . Now i have a phone that i can not use, please help me .
thank you
note: the phone was rooted
XDA Visitor said:
hello,
i have a problem with my s6 edge since last week.
i gave my phone to someone and when i got it back the sim card was not working,(i made some research and i noticed that the Efs was damaged). i then tried to use Kies to restore the phone. After the restoration (Android 6.0.1) , the phone tried to boot and i got this error: " dm-verity verification failed, need to check DRK first... ". i then began my research again and i founded one solution on youtube " a file that i had to flash via odin " . I then decided to try it out , and when i tried it failed, i receive that error: " Custom binary blocked by FRP Lock " . Now i have a phone that i can not use, please help me .
thank you
note: the phone was rooted
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> T-Mobile Samsung Galaxy S6 Edge > T-Mobile Galaxy S6 Edge Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck
Please help, i have been everywhere on the net and tried every possible method presented. adb, side load, factory reset, wipe/cache. nothing works. rooted my phone, later unrooted because i was gonna take it to be fixed because softkeys stopped workin, but downloaded button savior instead. then eventually wanted mt phone root again. forgot to adb "reboot disemmcwp" first. long story short, bricked phone, stuck at zte logo. i can enter the recovery mode. but it will not allow me to update from sd card for some reason. my usb debugging is not turned on. and most importantly I cannot for the life of me find stock rom or any other rom for this damn phone. as mentioned, i already did factory reset and wiped my data but it did not solve issue. i read in another forum that disabling certain apps could cause a soft brick after doing a factory reset, i did have some apps disabled. so dont know if that is the cause. I know how to flash firmware, roms, and recoveries. But i cannot find a custom rom, or a custom recovery for the ZTE Prestige N9132......so can someone please give me a copy of the stock firmware, or kindly direct me as to where i can download it???? I have scoured the internet for literally 4 days now and cannot find any firmware for this model phone at all......PLEASE HELP!!
I would be satisfied if i could even get a custom rom or recovery, if not the stock firmware would be fine. just please show me where i can download it from
Hi !
Unfortunately there is no dedicated forum for your specific device that more users can gather and discuss
We don`t have a firmware section here on XDA , if you want to request it you may do it here https://forum.xda-developers.com/android/help though I see that you have already done it here https://forum.xda-developers.com/showpost.php?p=71152939&postcount=5
So let`s wait for users with a similar device to reply
Good luck
thread closed