I have been searching all day trying to fix this and nothing seems to be working.
I've tried the Kindle Fire Unbricking Tool - no luck. I've tried using RootJunkies SuperTool and that was not very helpful either (though it did recognize my device when nothing else would). I've tried going into ADB manually through CMD and that was no use. It couldn't find my device. My PC is recognizing my Fire as TP-LINK Android Phone and the tablet won't start up at all. It's stuck perpetually on the Cyanogenmod boot-screen. I accidentally checked the 4th box when I was using FlashFire to flash the Cyanogenmod 12.1 version and I believe I wiped my internal memory. Is there any hope?
Hello,
Welcome to XDA.
Try posting your question in the thread linked below.
http://forum.xda-developers.com/amazon-fire/help/help-thread-question-noob-friendly-t3205441
The experts there may be able to help. Good luck.
Related
I rooted my kindle and installed a 2nd bootloader and TWRP it worked fine for a few days but then i decided to upgrade my TWRP and i some how corrupted my bootloader and now my kindle is stuck on the boot screen which shows the logo Kindle in White and Fire in Orange it does not go ahead. My pc does not even detect my kindle so I read this thread
http://forum.xda-developers.com/showthread.php?t=1869297
but i am not able to solve this problem.
It does not go into fastboot.
I tried to upgrade from TWRP 2.6.0.0 to 2.8
I think the problem was that i did not install FireFireFire in my kindle
I used usb 3.0 to do all of this.
Please Help
Hi,
I see you've already asked about this in your device section, which is the best place.
Xda Assist is here to help navigate the site, not for support. And you found your way already. ?
So I will close this thread. Thanks!
First of all, this is an awesome site..! so much support.
I went to load MOFOROOT onto droid turbo, the cable go unplugged in middle of process.
Turbo has been stuck in bootloop ever since.
Using windows 8 and I have used every resource to try and get the phone to connect to computer so I can reload stock ROM. The drivers will not load to the phone.
I have used USBDeview.
I have done partition clean.
I have wiped/factory reset
I have tried RSD Lite - which will not find the device
I have tried connecting it to PC through recovery mode.
My biggest issue is not being able to load correct drivers. Which may never happen so JTAG?
No matter what procedure I try from every forum, I do not get the desired outcome that most do.
What do I do?
any ideas?
V/r,
~Jerney
Hi there,
I'm sorry but I don't find anything about your problem exactly. Please see the thread bellow:
[BOUNTY] - Unlock our Bootloader / Root the Turbo!
Also for questions please register an account on XDA and ask directly here:
Verizon Motorola Droid Turbo Q&A, Help & Troubleshooting
Good luck
Hey Guys. I have a Rooted Kindle Fire 2nd Gen, it was working fine when out of the blue it restarted on it's own and I get an error message saying I needed to restart or reset the device. I tried restarting but I kept getting the same error so I decided to reset. The process started out fine, the Kindle logo comes up but then I get a red screen and it just stays that way. I searched online and realized that my Kindle was bricked and I needed a fastboot cable, which I currently don't have. Is there any way at all to unbrick this device without using a fastboot cable? All suggestions would be greatly appreciated. Thank you guys.
Hi, thank you for using XDA Assist. Try asking in your device's specific forum here, http://forum.xda-developers.com/kindle-fire-hd But two thoughts, if something just happens out of the blue it's usually a hardware issue. And, you're only other hope is to return the device to stock and you're going to need the cable to do that.
Thread closed.
Hi I bricked my device last week, I have a factory cable and my pc still wont find my device.
I was trying to change it into a full android device an it bricked at the last step.
I bought a factory cable and it did initially show in my devices, but I foolishly un-installed it.
Now I need to get my device to find the Kindle so I can rebuild it.
Help needed.
Levahn said:
Hi I bricked my device last week, I have a factory cable and my pc still wont find my device.
I was trying to change it into a full android device an it bricked at the last step.
I bought a factory cable and it did initially show in my devices, but I foolishly un-installed it.
Now I need to get my device to find the Kindle so I can rebuild it.
Help needed.
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist.
You'll find the best results by asking in your device's specific help forum:
http://forum.xda-developers.com/kindle-fire-hd/7-inch-help
Here's the main forum area as well:
http://forum.xda-developers.com/kindle-fire-hd
Good luck!
Hi, tried searching the forums but cannot find anything.
I've got a 1st Gen Kindle Fire HD, which belonged to my younger sister. One day out of the blue, she approached me because the kindle had stopped working.
Basically, whenever i try and boot up the kindle, the standard kindle logo displays, then almost immediately jumps to a fastboot logo and stays there.
When connected to a pc, it's no longer detected as a kindle, but comes up as 'bowser-09' i did "correct this" by manually installing the android adb drivers and it recognises as that now.
I've tried the unbrick tool and kindle fire utility, and both tell me that the device cannot be found, i've also purchased a factory cable, but had no further luck.
The device isn't rooted and everything on the device was stock. When i contacted amazon customer services, they told me the reason it was stuck in fastboot was that i'd tried to modify the device, so they wouldn't send a replacement.
Any help would be appreciated as i don't want to be left with an expensive paperweight, and have to fork out for a new device.
Hello,
In order for us to assist you further, please post your question in the forum linked below
http://forum.xda-developers.com/kindle-fire-hd
Post in whichever Q&A subforum applies to your kindle. The experts there will be able to help you. Remember to create anXDA account so you can post and reply in the forums. Good luck