Database Info

[Q] Pls hept me i break my samsung galaxy sl i9003

i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((

you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?

Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*

Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)

umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are

supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003

Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps

add me on messenger sp8ky1 , maybe i could explain(in romanian)

umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...

i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....

Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?

Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310

Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.

Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.

Rooted samsung S4 i537 active android 4.2 to lollipop

I m using a rooted samsung S4 active i537 and want to upgrade it to lollipop so i found this website that describe everything in detail a web site www . droidv ews . com / update-to-lollipop-and-root-att-galaxy-s4-active-sgh-i537 (so I downloaded everything needed)
So to start I needed to upgrade my firmware to 4.3 first
My problem is every time i m pressing the volume up+ home + power button , I go to Android system recovery <3e> directly so my Odin doesn t see my phone to be able to update my firmware
I m grateful in advance for your help
thx

marsambou said:
I m using a rooted samsung S4 active i537 and want to upgrade it to lollipop so i found this website that describe everything in detail a web site www . droidv ews . com / update-to-lollipop-and-root-att-galaxy-s4-active-sgh-i537 (so I downloaded everything needed)
So to start I needed to upgrade my firmware to 4.3 first
My problem is every time i m pressing the volume up+ home + power button , I go to Android system recovery <3e> directly so my Odin doesn t see my phone to be able to update my firmware
I m grateful in advance for your help
thx
Click to expand...
Click to collapse
You'll get better results by asking in your specific device help forum.
http://forum.xda-developers.com/galaxy-s4-active/help

Samsung S6 920F- Stuck At Bootloop After Update With Odin

Samsung S6 920F Stuck Boot loop!! PLS HELP
Hello :crying:
If someone can help me pls do it!! :crying::crying::crying:
I have tried to update my samsung S6 G920F model , ll looked ok , after odin rebooted my phone, and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck!!
I try Volum Up + Power + home button and none recovery menu
Pls help me

Try to use "Smart Switch" and click on the top right of the windows "more" and try an "Emergency software recovery and initialisation".
There is a guide inside the software who explain everything.
Since you can not go into recovery will not help
Wich firmware you tried to flash and what was the status of your phone before (root, custom rom, stock rom etc..) ?

Svan987 said:
Try to use "Smart Switch" and click on the top right of the windows "more" and try an "Emergency software recovery and initialisation".
There is a guide inside the software who explain everything.
Since you can not go into recovery will not help
Wich firmware you tried to flash and what was the status of your phone before (root, custom rom, stock rom etc..) ?
Click to expand...
Click to collapse
I use before a stock rom 5.1.1 root was stock too
In Smart Switch on Emergency software recovery i cant see my phone
Now i just intall:
Root: S6-UniBase_BOG8_v2
Firmware: G920FXXU2BOG8_G920FOXX2BOG9_G920FXXU2BOGE_HOME.tar.md5 - this is the last oficial firmware on sammobile.com
And same screen: Samsung galaxy s6 powered by Android!
Still i cant acces the recovery menu: Volum Up + home + power

alb3rto2005 said:
I use before a stock rom 5.1.1 root was stock too
In Smart Switch on Emergency software recovery i cant see my phone
Now i just intall:
Root: S6-UniBase_BOG8_v2
Firmware: G920FXXU2BOG8_G920FOXX2BOG9_G920FXXU2BOGE_HOME.tar.md5 - this is the last oficial firmware on sammobile.com
And same screen: Samsung galaxy s6 powered by Android!
Still i cant acces the recovery menu: Volum Up + home + power
Click to expand...
Click to collapse
After opening smart switch, click more > Emergency firmware recovery > device initialization > Key in your phone Model (SM-G920F) > then key in your device serial number then it will download the latest update for your phone. remember to put it into download mode.

zincsnow said:
After opening smart switch, click more > Emergency firmware recovery > device initialization > Key in your phone Model (SM-G920F) > then key in your device serial number then it will download the latest update for your phone. remember to put it into download mode.
Click to expand...
Click to collapse
OK OK, Now i start!

alb3rto2005 said:
OK OK, Now i start!
Click to expand...
Click to collapse
All the best! i hope it does work, i was worried as hell too when my phone couldn't start.

alb3rto2005 said:
OK OK, Now i start!
Click to expand...
Click to collapse
I just do that and:
Smart Switch recognize my phone, download and install the firmware but same problem, Stuck on first screen: SAMSUNG Galaxy S6 Powered by Android :crying::crying::crying:

alb3rto2005 said:
I just do that and:
Smart Switch recognize my phone, download and install the firmware but same problem, Stuck on first screen: SAMSUNG Galaxy S6 Powered by Android :crying::crying::crying:
Click to expand...
Click to collapse
After completing the steps, how long was it stuck on Samsung Galaxy S6 powered by android screen?

zincsnow said:
After completing the steps, how long was it stuck on Samsung Galaxy S6 powered by android screen?
Click to expand...
Click to collapse
10-15 minutes.... i let him... and nothing!
And still i cant access the (Power up + home + power) recovery menu ...

alb3rto2005 said:
10-15 minutes.... i let him... and nothing!
Click to expand...
Click to collapse
May i know exactly what did you do before this? were you coming from root > stock or stock > root?

zincsnow said:
May i know exactly what did you do before this? were you coming from root > stock or stock > root?
Click to expand...
Click to collapse
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen

alb3rto2005 said:
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen
Click to expand...
Click to collapse
i think this MAY help you.
Download Bootloader here and put in BL
Download Modem here and put in CP
After flashing these two in download mode, connect your phone to the PC and smart switch again, and use emergency recovery. I really HOPE this will fix your problem.

alb3rto2005 said:
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen
Click to expand...
Click to collapse
did it work for you?

zincsnow said:
did it work for you?
Click to expand...
Click to collapse
Now i will try! Let`s see!

alb3rto2005 said:
Now i will try! Let`s see!
Click to expand...
Click to collapse
Good luck! it should work now

zincsnow said:
Good luck! it should work now
Click to expand...
Click to collapse
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:

alb3rto2005 said:
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:
Click to expand...
Click to collapse
I think i need a Samsung S6 32 GB - neverlock - .pit file

You should flash a rom with twrp..
download the twrp's latest version and flash it via odin.
Buy a micro usb otg cable if you cant reach your phone from ur pc. I was like that..
then put a custom kernel + rom into the usb. then flash the kernel then rom to the device using usb-otg from install menu.
Then you should be good to go

alb3rto2005 said:
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:
Click to expand...
Click to collapse
May i suggest you bring it back to Samsung service center to get it repaired instead?

Why a usb-otg?? My official cable is ok
I have tryied with curstom kernel and firmware and no results!
I need a pit file of a samsung s6 32 gb NEVERLOCKED

Help pls!! Boot loop!! No recovery!! Samsung s6

Hello
If someone can help me pls do it!!
I have tried to update my samsung S6 G920F model , ll looked ok , after odin rebooted my phone, and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck!!
I try Volum Up + Power + home button and none recovery menu
Pls help me

Download the lastest firmware for your phone on Samobile and flash it with odin in download mode (in "AP") .
Check the md5 to exclude a bad download.
That the only way to fix your situation.

Add me and call me on Skype when you can! Pls
Id: alb3rto2005

alb3rto2005 said:
Add me and call me on Skype when you can! Pls
Id: alb3rto2005
Click to expand...
Click to collapse
Follow -JFK- 's instructions bro. That should solve it.
Sent from my SM-G925F using Tapatalk

None results!! Nothing new?!

Try to flash the old firmware with odin that was with your s6 before....

You could not manage to flash tje firmware via ODIN? Any errors (cause you posted none)?

I have used almost a day to fix my phone.
This thread helped me.
http://forum.xda-developers.com/galaxy-s6/help/help-softbricked-device-t3087228

Please Help - soft bricked S7 on 3 (UK) SM-G930F

Hi guys,
I have managed to soft brick my S7 flat after trying to root it. using odin. I have also done a factory reset - so no more debugging over the PC, I have to now try recovery on SD card.
The stock rom I have is G930FXXU1DQB7
I can't seem to find a stock rom to put onto the SD card and reinstall the rom ... I think samobile and another site seem to be the only ones that has the stock ROM and there d/l are terrible and often get a corrupted file ( I have tried x4 times now )
If some one could tell me how to either - Put a custom ROM on a stock S7 ( No TWERP on the phone yet ) .. or how to recover my S7 back to manufacturers ... Id buy you a virtual beer ! Had my phone for about 2 weeks and already I cant use it !!

The following thread has the stock firmware uploaded to Mega, so should be easier and more reliable to download:
https://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
Don't forget to thank the author of the thread if you find it helpful.

thx, ill give it a go

thx, ill give it a go
I got 9 MB a sec. d/l ... thats a lot better !! Ill try this out and see if I can get it back. - and I will thx the user for all the hard work etc. they have put in to their project

no, didn't work .. it sayes the footer is wrong ../??
I don't know what that means ... anyone ..?

Formatt said:
no, didn't work .. it sayes the footer is wrong ../??
I don't know what that means ... anyone ..?
Click to expand...
Click to collapse
You need ODIN 3.12.3 from here
https://mega.nz/#!uBwC3KqR!17OPP5A1g9d7-GxAqCbjXFpmYfO7CgAHNcaZxqEkOao
You need the latest G930F ROM from either here
http://updato.com/firmware-archive-select-model?q=G930F
Or from samfirm tool here
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Extract the ROM, add AP, CP, CSC and BL to the 4 sections in ODIN
Put the phone into download mode (Volume Down & Home & Power)
Connect phone to PC USB, make sure the port is connected on ODIN
Press Start on ODIN
Wait for it to reboot back into working Android

thx for your comments, but I cant use odin as I have hard reset the phone ! - so no ADB via usb
I will try the links though ..

The phone does go into d/l mode ... but as I have hard reset to factory I need to go back into the phone and go into dev. options and enable debugging. .. trouble is The phone just boots to the logo and then loops.

Formatt said:
thx for your comments, but I cant use odin as I have hard reset the phone ! - so no ADB via usb
I will try the links though ..
Click to expand...
Click to collapse
What has ADB got to do with ODIN?
You just need download mode, nothing more
Every step I wrote is all you need to follow

hi guys,
Ive managed to fix it ! - I downloaded a good stock rom and uploaded like you guys said ... with Odin ... I had to mess abouit with Odin versions before I got one that worked.
Many thanks guys for all your help. I really had a panic on then for a bit !