I was wondering if all of the old battery tips still even apply? When I get it today do I still need to charge it completely before turning it on? Do I need to "condition" it by letting it die all the way first then charging it and if so do I do it when I first get it instead of charging it? Thanks!
Related
I used to get the JASJAR battery issue by blacking out on X% - X%
but not anymore when i bought a new battery and replaced it with my old one, but i found there is an issue with the new one when i fully charge it till it shows green light suddenly the JASJAR freez and wont work till i soft rest
this forbidding me from fully charging it and really a pain in the ass when i leave it to charge overnight while im sleeping but when i woke up i find that it freezed as it shows green even if i pull the charger wire from it till i soft rest again.
in this case i prevent to keep it on the charger for long time to fully charge because i fear to lose any phone call or anything during freezing.
anybody knows the solution for this issue?
oras said:
I used to get the JASJAR battery issue by blacking out on X% - X%
but not anymore when i bought a new battery and replaced it with my old one, but i found there is an issue with the new one when i fully charge it till it shows green light suddenly the JASJAR freez and wont work till i soft rest
this forbidding me from fully charging it and really a pain in the ass when i leave it to charge overnight while im sleeping but when i woke up i find that it freezed as it shows green even if i pull the charger wire from it till i soft rest again.
in this case i prevent to keep it on the charger for long time to fully charge because i fear to lose any phone call or anything during freezing.
anybody knows the solution for this issue?
Click to expand...
Click to collapse
Perhaps if you try to install another ROM could solve the problem
Hope it helps and good luck,
I'm having the same problem. Have tried 2 ROM. I'm using 3200 mah battery. I'm not really sure about this, but when I'm using the 1600 mah battery, it seems ok. I'll try again tonight charging with 1600 mah battery
tronichs said:
I'm having the same problem. Have tried 2 ROM. I'm using 3200 mah battery. I'm not really sure about this, but when I'm using the 1600 mah battery, it seems ok. I'll try again tonight charging with 1600 mah battery
Click to expand...
Click to collapse
I Have 1600 mah battery
The Original One
oras said:
I used to get the JASJAR battery issue by blacking out on X% - X%
but not anymore when i bought a new battery and replaced it with my old one, but i found there is an issue with the new one when i fully charge it till it shows green light suddenly the JASJAR freez and wont work till i soft rest
this forbidding me from fully charging it and really a pain in the ass when i leave it to charge overnight while im sleeping but when i woke up i find that it freezed as it shows green even if i pull the charger wire from it till i soft rest again.
in this case i prevent to keep it on the charger for long time to fully charge because i fear to lose any phone call or anything during freezing.
anybody knows the solution for this issue?
Click to expand...
Click to collapse
I had this problem two times with two new batteries, I sent them back to the supplier, it's not a matter of ROM (tried on my Universal and on another Uni of a friend, same behaviour) it's a battery problem.
Marco.
yes it is battery problem, UNI won't wake up when full charging.
so make it not sleep when charging
try to change setting -> battery power
do not check on external power.
hope it work
indrastrid said:
yes it is battery problem, UNI won't wake up when full charging.
so make it not sleep when charging
try to change setting -> battery power
do not check on external power.
hope it work
Click to expand...
Click to collapse
This Is Smart
defiantly will try it out tonight
I had similar problem, but it was ROM-related. Try re-flashing Tomal 8.2 and see if it solves it. Nothing to lose. If doesn't work - you know it has to be the battery.
I generally re-flash when problems appear, especially when you had the same ROM for some time. Solves most of things.
Best of luck
Hello,
anyone have solution for Uni Battery
My Uni is getting Turn off when battery power is 66%,
I tried the procedure defind in wiki page, but still same
Regards
Sorry man but no help for your battery
I have same problem and tray everything possible and impossible but nothing help
Best solution is to charging your battery in AC charger not on usb PC connector
cheers
My Dear, Thnx for replying,
I always use AC Charger, i use USB just for Sync nothing else
dzuljo said:
Sorry man but no help for your battery
I have same problem and tray everything possible and impossible but nothing help
Best solution is to charging your battery in AC charger not on usb PC connector
cheers
Click to expand...
Click to collapse
Or buy a new battery...
I had this problem, but my solution was a tad risky.
Try discharging the battery COMPLETELY, so letting the Universal die at 66%, then trying to turning it on after that until it simply will not turn on anymore. When you get to that stage, take your A/C charger and plug it into the Universal, allowing it to charge for 9-12hrs (overnight is good). Once it's fully charged (green light where the orange once was) take it off charge and see if that 66% goes any lower. Mine goes to about 12% before it dies now, which is a good day and a bit of charge for me on the stock battery. Not bad, considering I top it up everynight anyway.
The reason it is risky is because I've heard the batteries the Universal use don't like being completely discharged. Not sure on the technical reasons why, they just don't. So I'd consult another before trying this.
go universal's wiki and read the how to fix battery issues!
you may need to recallibrate your battery!
if you update your latest rom, with the battery not fully charged, you need to charge the battery to 100% and flash again you rom....
solution
dont mess! for the cost, buy a new battery. Batteries do wear out. If it is a fake one, they wear out even quicker.
Had the same problem myself, tried loads of stuff. In the end I also bought a new battery.
One thing you could do, is run your uni with out your SD card.
Thanx to you all for replying,
I think new battery suggestion is good, instead of taking nay risk.
shoulders said:
dont mess! for the cost, buy a new battery. Batteries do wear out. If it is a fake one, they wear out even quicker.
Had the same problem myself, tried loads of stuff. In the end I also bought a new battery.
One thing you could do, is run your uni with out your SD card.
Click to expand...
Click to collapse
I re calibrated my battery yesterday and did everything right. let it charge, ran battery calibration, let it die, then recharge (without taking phone off charger) to 100%...and over night my phone didnt even get to 60%...it was on the charger for more then 7 hrs...Did i do something wrong? or use a wrong app?... I came across this forum that tells me to do a little more then what i did before but i'm a little confused about it from step 6 on down. Check it out and let me know please. my phones being really dumb. thanks
http://forum.xda-developers.com/showthread.php?t=1158738
On my tablet is battery is brazing and I cant remove it.
My tablet won turn on and only solution is to remove and plug battery again. I dont wont to do this.
I wonder whether the same when I left the battery to be fully discharged as if I was remove it and plug again?
thanks a lot
Hi, guys!
After updating my phone to 5.1.1 I now have a weird scenario when charging my phone.
I would let my phone die, and then when I charge it I would switch it on when it gets to round about 10%. Upon start up my battery display in the notification panel will say around 50-60%?! I'm really confused. Is there a way I can reset this? I have tried cycling the battery but that hasn't solved it.
Any suggestions are welcome!
Thanks,
Paul.
afaik its not good to leave the battery go below 5%
i always try to keep my battery between 40% and 90%
after an os update it takes a couple of weeks for the new os to adjust itself to the battery and the more you use it the better it will predict the remaining battery level
I have issue with battery charging too. When i plug it charging is fine ,but when i get phone on my hand to use Then stop charging like 10-20 mA from 1100 mA. Any suggestions?