Kali NET-HUNTER
This is the kali nethunter for the htc one m7 running on the latest android version (6.0 and 7.0 /NOUGAT/Marshmallow)
SCREENSHOTS
http://imgur.com/a/JEL0l
Steps To Install
1.-Download the latest cm 13,14 or LOS 13,14 and nethunter and the Gapps ( Just to obatin Google Playstore )
2.-Flash cm 13 or LOS 14 and Gapps/
3.-Now reboot and load cm 13,14 or LOS rom ( wait until the boot completes )
4.-Go back to recovery and install the nethunter zip
5.-Now reboot
5.-success !
Downloads
cm 13 = https://androidfilehost.com/?w=files&flid=23169
Net-Hunter = https://www.androidfilehost.com/?fid=24651430732236171
Net-Hunter for nougat =https://www.androidfilehost.com/?fid=745425885120725928
Update Big Thanks to @michael8t6 for making the kernel
androidhost are taking forever to approve my dev account so I've had to upload it to my G drive for now. This is the standard cm13 rom running on android 6.0, nothing has changed, I've just replaced the kernel with a patched one. You can download it here: https://drive.google.com/file/d/0B43...ew?usp=sharing
steps to install
Copy the zip and Gapps to your phone.
Reboot into recovery mode.
Wipe data, cache, dalvik.
Flash rom, then flash Gapps
If you're S-OFF then simply reboot and follow ZpanicZ instructions for installing net hunter.
If you're S-ON then reboot back into bootloader.
Extract boot.im from the zip onto your computer and into your fastboot directory.
Plug your phone into your computer and run the following command:
Code:
Code:
fastboot flash boot boot.img
Reboot and enjoy.
On the first reboot after flashing the rom, it can take up to ten mins for the phone to boot completely. Just be patient.
After you've finished installing nethunter, install the Xposed framework if you want to, not before, I fount this caused the phone to hang on the boot screen.
Once you've finished installing everything, run the nethunter app and grant it root permissions.
Close the app and re open the app, if you don't see any HID devices showing under the HID devices section. Open a new kali terminal and run the following command:
Code:
Code:
ls /dev/hidg*
You should see two HID devices come up, if you don't then post in this thread and I'll try to help you.
If you do see the devices, then nethunter isn't looking in root but the HID attacks should still work.
Lastly, if rubber ducky isn't working for you, then enable debugging mode via the developer options under settings and also connect your phone to your computer via MTP mode.
Known issues
▼BADUSB MITM isn't working, this isn't due to the kernel but is related to the nethunter install. I've been researching into this and need to look into the way it assigns the interfaces more.
▼I'm not sure if monitor mode is working for external wireless adapters. So basically, when building the kernel, I have to enable the relevant options to support the chipset drivers. The three main ones are obviously athros, ralink and realtek. When I was compiling, I hit an error regarding the realtek drivers, so for now I've not bothered enabling any support for wireless cards as compiling takes ages on my computer (she's a dinosaur). Once I'm not sick of staring at my monitor any more, I'm going to be looking into this feature as my first priority. That being said, if anyone does manage to enable monitor mode on a wireless adapter, please let me know in this thread, there's no point enabling athros drivers if they already work, it'll just make the kernel bulkier and slow down the phone overall.
▼You tell me.
Credits:
@9Lukas5 for allowing me to use his kernel source.
@ZpanicZ for creating the nethunter app and giving me the motivation to learn about compiling kernels. You may want to add all this to the OP buddy. Done
Click to expand...
Click to collapse
any screenshots?
nandhul30 said:
any screenshots?
Click to expand...
Click to collapse
i will upload some screenshots in a bit
Seem cool...... What features does it incl.?
-leo- said:
Seem cool...... What deatures does it incl.?
Click to expand...
Click to collapse
Here are some of the features from kali linux site https://www.kali.org/kali-linux-nethunter/
you can do a lot of things with nethunter because it includes all kali linux OS features .
What i found is the best of this rom is the vnc (virtual network computing), it's kali linux v 1.0 on a phone !
works zip on GPE?
Seems nice, how is the battery life in this?
nikola360 said:
works zip on GPE?
Click to expand...
Click to collapse
yes it should work in gpe as well
kala123 said:
Seems nice, how is the battery life in this?
Click to expand...
Click to collapse
Exactly the same as having cm 13, which is pretty standard
thx, it's fantastic!
Can i usw a cm 13 based Rom?
ZpanicZ said:
Kali NET-HUNTER
This is the kali nethunter for the htc one m7 running on the latest android version (6.0 Marshmallow)
SCREENSHOTS
http://imgur.com/a/JEL0l
Steps To Install
1.-Download the latest cm 13 and nethunter and the Gapps ( Just to obatin Google Playstore )
2.-Flash cm 13 and Gapps/
3.-Now reboot and load cm 13 rom ( wait until the boot completes )
4.-Go back to recovery and install the nethunter zip
5.-Now reboot
5.-success !
Downloads
cm 13 = https://androidfilehost.com/?w=files&flid=23169
Net-Hunter = https://www.androidfilehost.com/?fid=24651430732236171
Click to expand...
Click to collapse
Hi. Can use it in htc one m7 sprint ? Now I am using GSM in VietNam
Wlkchnbndgr said:
Can i usw a cm 13 based Rom?
Click to expand...
Click to collapse
Well it's 99% it will work without problems, ( but i do not recommend installing modified cm roms )
takaru said:
Hi. Can use it in htc one m7 sprint ? Now I am using GSM in VietNam
Click to expand...
Click to collapse
If the cm 13 rom supports sprint then yes it will work perfectly
Works on Aicp. :good: But i think i must flash it again, when i do update my rom once a week, right?
Wlkchnbndgr said:
Works on Aicp. :good: But i think i must flash it again, when i do update my rom once a week, right?
Click to expand...
Click to collapse
Most likely , yes
Whoa ... No way
ZpanicZ said:
Kali NET-HUNTER
This is the kali nethunter for the htc one m7 running on the latest android version (6.0 Marshmallow)
SCREENSHOTS
http://imgur.com/a/JEL0l
Steps To Install
1.-Download the latest cm 13 and nethunter and the Gapps ( Just to obatin Google Playstore )
2.-Flash cm 13 and Gapps/
3.-Now reboot and load cm 13 rom ( wait until the boot completes )
4.-Go back to recovery and install the nethunter zip
5.-Now reboot
5.-success !
Downloads
cm 13 = https://androidfilehost.com/?w=files&flid=23169
Net-Hunter = https://www.androidfilehost.com/?fid=24651430732236171
Click to expand...
Click to collapse
I never saw this coming!
Just lately I had decided to hop onto my old HTC One M7 phone to see what all I had left on it. ...
Then I figured, hey, perhaps there's something newer that I could flash onto it seeing as how is been well over a year since I'd used it at all.
WoW! ... and then I found this on here and my mind was blown!
I've been wanting to try Kali NET-HUNTER out for years now and this this is just awesome, thank you for sharing this with us.
?
starovdarkness said:
I never saw this coming!
Just lately I had decided to hop onto my old HTC One M7 phone to see what all I had left on it. ...
Then I figured, hey, perhaps there's something newer that I could flash onto it seeing as how is been well over a year since I'd used it at all.
WoW! ... and then I found this on here and my mind was blown!
I've been wanting to try Kali NET-HUNTER out for years now and this this is just awesome, thank you for sharing this with us.
��
Click to expand...
Click to collapse
Glad i wasn't the only one :b , i was kind of suprise there was no kali nethunter for this phone.
installation went smoothly..which is the preferred wireless card?
Sent from my MI NOTE LTE using Tapatalk
damn66 said:
installation went smoothly..which is the preferred wireless card?
Sent from my MI NOTE LTE using Tapatalk
Click to expand...
Click to collapse
well there are several cards that works perfectly, you may want to google that, also search for wireless cards that can do packet injection without problems.
Related
Kali NetHunter for the Galaxy Note 3 (3.1.0)
Welcome to the thread on Kali NetHunter for the Samsung Galaxy Note 3.
If you don't know what Kali NetHunter is, well, it's the entire Kali Linux operating system in a chroot on your phone, plus a bunch of awesome apps for executing exploits, fixing things, doing cool things. It goes on, I suppose.
I'm gonna be honest guys, I'm not a security person. When it comes to security, I'm more of a Paul Blart.
What I do know though, is that there is apt-get, and apt-get is life.
Find much more information here: https://github.com/offensive-security/kali-nethunter/wiki
The answer to all your questions, generally the answer is YES, IT CAN DO THAT.
Most AOSP based ROMs should be supported!
The updater zip will add a few files to your /system partition, and install all of the NetHunter apps to your /data partition.
The chroot is located in /data/local, so you don't have to worry about your system partition being full. It's full read/write capable.
Understand that the zip will replace your current kernel with a completely different one.
This is necessary because most stock or custom kernels don't provide the drivers needed to operate most of Kali NetHunter's features.
DOWNLOAD
Current version: 3.15.3 (stable, 2016-12-17)
Please be careful to download the right version based on this table:
N9005: hlteeur
N900W8 & N900T: hltecan
N900P: hltespr
N900K, N900L, & N900S: hltekor
SC-01F: hltedcm
SCL22: hltekdi
CyanogenMod 12.1 & SlimRom 5.1: lollipop
CyanogenMod 13.0 & SlimRom 6.0: marshmallow
Nightly TWRP flashable zips are located at: https://build.nethunter.com/nightly/
BEFORE INSTALLING
Please make sure your phone boots fine and runs fine before flashing NetHunter. It's confusing when people report bugs that exist in CyanogenMod by itself.
The Kali chroot and apps are installed on your data partition (in /data/local for chroot). To initialize the chroot and install Kali Linux, you need to start the Kali NetHunter app.
The NetHunter installer will automatically install SuperSU in system mode, which I consider to be more stable. Since NetHunter already modifies your system partition, there is no need to use systemless SuperSU anyways.
FULL FRESH INSTALL STEPS
Optional: Flash CyanogenMod/SlimRom installer zip
Optional: Flash Gapps if you want them (preferably OpenGapps pico)
Boot into device
Complete setup wizard
Reboot into recovery
Flash kernel-nethunter-hlte* and nethunter-generic-armhf-kalifs-full-rolling zips in any order.
Boot into device
Open the NetHunter app
Use the Kali Chroot Manager to finish the installation
You're done!
UPDATING TO A NEWER BUILD
Going from 3.0.0 and up, all you have to do is flash the new build in recovery and wipe dalvik cache.
UPDATING YOUR ROM
To get all your NetHunter and SuperSU functions back after flashing a new ROM, just flash the ~60 MB update-nethunter-* zip again.
RUNNING WIFI PENETRATION TESTS
The internal WiFi chipset of the Galaxy Note 3 is not capable of running services which use monitor mode such as Wifite. For this, you will need to use a monitor mode capable WiFi adapter through a microUSB OTG adapter.
As for compatible adapters, I highly recommend the Alfa Networks AWUS036NEH (eBay) which uses the Ralink RT3070 chipset. There are currently no monitor mode supported Wireless-AC adapters available.
Once plugged in, you can run the command from Kali terminal to turn on your adapter:
[email protected]:~# ip link set wlan1 up
RAN INTO AN ISSUE OR BUG?
In order for me to help you, you have to at minimum reply with:
The link to the exact zip you downloaded
Your device model (hlte, hltecan, hltesovietrussia, etc.)
The name of the ROM you're flashing it on
The version and build date of the ROM you're flashing it on
A complete description of your problem
Optional: An audio recording of you reading this entire post
If your issue is with a specific app, it might be better to contact the developer of that app.
If your issue is during the installation (ex. flashing the NetHunter zip), then please collect a TWRP recovery.log for me.
If you found a problem and were able to fix it, and no one's mentioned it in the thread already, it would be kind to state the issue and your fix for others to make use of as well.
You can join me and the other NetHunter developers on IRC at the #nethunter room on freenode to more handily diagnose problems together.
I apologize, but I can't do house calls at this time.
You may be able to fix some bugs by updating to the latest bootloader and modem for your device.
See: (Direct Download) Latest Bootloaders & Modems
KNOWN ISSUES
USB Keyboard & VNC - Google Keyboard, AOSP Keyboard, CM Keyboard do not work due to a depth bug, use Hacker's Keyboard as a workaround.
Terminal App - Full screen programs like nano or vi are unusable unless you use the resize command. (always type resize when opening a new terminal window)
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DEVELOPMENT
For the kernel included in NetHunter for the Samsung Galaxy Note 3, you can find the sources here: https://github.com/jcadduono/idleKernel-note3
See the Kali NetHunter installer source here: https://github.com/offensive-security/kali-nethunter
See the Kali NetHunter app source here: https://github.com/offensive-security/nethunter-app
It is powered by idleKernel, however none of the idleKernel scripts (ikconfig, usb control, kernel tweaks) are available by default. I recommend installing idleKernel zip (non-NetHunter) from the idleKernel thread and then flashing the NetHunter updater or kernel installer over idleKernel. You will then have all of idleKernel and Kali NetHunter's features at your disposal.
DISCLAIMER
I am not affiliated with Offensive Security. They seem like cool guys though.
I'm not even a novice when it comes to security and penetration. I'm just a simple system administrator with a passion for breaking Android.
Please restrain yourselves from asking me security related questions.
NOT SO MUCH AS SEEN ON MR. ROBOT, BUT PROBABLY EVEN BETTER
XDA:DevDB Information
Kali NetHunter for the Galaxy Note 3, Device Specific App for the Samsung Galaxy Note 3
Contributors
jcadduono, the Kali NetHunter team
Source Code: https://github.com/jcadduono/kali-nethunter
Version Information
Status: Stable
Current Stable Version: 3.15.3
Stable Release Date: 2016-12-17
Created 2016-01-07
Last Updated 2016-12-21
Reserved
first
great cant wait to try it out
What solution are you offering for Wifi devices, Are you going to compile kernel for compatable devices?
Or is this something the user is going to have to do.
I only mention this, as i have a Working version of Nethunter and have for over a year, But i refused to post release information due to the support required to get various wifi devices to work.
I did not want to get involved so the release never happened, Am happy compliling my own kernel for supported drivers, But i dont see your average joe doing this.
Also another snag i found was you can only have the one wifi device enabled at one time, so disabling the onboard to enable the external.
All issues by commands, but am just questioning if you have considered this or have support for this?
dave7802 said:
What solution are you offering for Wifi devices, Are you going to compile kernel for compatable devices?
Or is this something the user is going to have to do.
I only mention this, as i have a Working version of Nethunter and have for over a year, But i refused to post release information due to the support required to get various wifi devices to work.
I did not want to get involved so the release never happened, Am happy compliling my own kernel for supported drivers, But i dont see your average joe doing this.
Also another snag i found was you can only have the one wifi device enabled at one time, so disabling the onboard to enable the external.
All issues by commands, but am just questioning if you have considered this or have support for this?
Click to expand...
Click to collapse
I suppose multiple WiFi devices would be in the realm of Kali rather than the kernel. I can't imagine it being harder than using a powered USB hub to connect multiple radios and configure each of them using one of the network managers available in the Kali repository, while leaving your native Broadcom WiFi to Android to handle. All the popular / mac80211 injection capable WiFi drivers are compiled right into the kernel and enabled - not as modules. The Nethunter installer takes care of installing all the necessary firmware binaries to your system partition as well.
The compatible USB WiFi dongles should just be plug and play at this point.
I'm still waiting on my TP TL-WN822N to arrive from Amazon for testing.
Btw have you tried the Nethunter 3.0 app? It really is designed to make everything quick and easy, 1 step for whatever you're trying to do.
Considering swinging by the #nethunter room on freenode to ask questions and/or suggest ideas to make things easier.
I have not tried 3.0
Am still talking about 2.0 seems like they have added some additional support like network manager.
This was not present in my build so i just use a few bash scripts to enable and disable.
But ill give this version 3.0 a try thanks
dave7802 said:
I have not tried 3.0
Am still talking about 2.0 seems like they have added some additional support like network manager.
This was not present in my build so i just use a few bash scripts to enable and disable.
But ill give this version 3.0 a try thanks
Click to expand...
Click to collapse
Not a network manager in nethunter app, I mean install one in Kali chroot the same way you would on a Debian server.
Version 3.0.1 is now up and the changes are:
Tell SuperSU to install in system mode (not systemless)
Update SuperSU to version 2.66
Use SuperSU's supolicy binary to patch the sepolicy during install (fixes Marshmallow/CM13.0 unable to boot)
Inject init.superuser.rc into the ramdisk if it's not there already
SuperSU should no longer be broken with non-gzip compressed ramdisks
Find commits here: https://github.com/jcadduono/kali-nethunter/commits/master
Please note that it is still Kali Nethunter 3.0, and the .1 is just an update that improves flashing compatibility.
Y'know, I really thought you guys would be eating this stuff right up. <_<
please include flashing instructions - do we need to also flash gapps...which ones should we use. Thank you.
comptonhubbard said:
please include flashing instructions - do we need to also flash gapps...which ones should we use. Thank you.
Click to expand...
Click to collapse
It's not a ROM, it's an app, kernel, and environment. You have to flash it on an already set up CyanogenMod ROM from TWRP.
jcadduono said:
It's not a ROM, it's an app, kernel, and environment. You have to flash it on an already set up CyanogenMod ROM from TWRP.
Click to expand...
Click to collapse
After IdleKernel 6.6.5?
Gandicela said:
After IdleKernel 6.6.5?
Click to expand...
Click to collapse
Doesn't matter. If you flash idleKernel after, make sure it's the -kali version though. The only thing flashing idleKernel does is add ikconfig, /sbin/usb, and a few small kernel tweaks in the ramdisk.
jcadduono said:
Doesn't matter. If you flash idleKernel after, make sure it's the -kali version though. The only thing flashing idleKernel does is add ikconfig, /sbin/usb, and a few small kernel tweaks in the ramdisk.
Click to expand...
Click to collapse
I see. It's therefore like this: Running CM>>Kali Hunter>>Kali Hunter Kernel. Cheers, Mate!
I need to format SD-card?
amazing work.
tnx
Mx WaR HaBiB said:
I need to format SD-card?
amazing work.
tnx
Click to expand...
Click to collapse
No you dont have to format it
Sent from my SM-N9005 using Tapatalk
Gandicela said:
I see. It's therefore like this: Running CM>>Kali Hunter>>Kali Hunter Kernel. Cheers, Mate!
Click to expand...
Click to collapse
So, do we need to use version for CM 12.1 for OnePlus from here?
https://www.offensive-security.com/kali-linux-nethunter-download/
Ps
It works
First install kali kernel, after download Kali for oneplusone, reboot into recovery, install kali zip, and aftet again idle kali kernel.
I am on CM 12.1 nightly...
eseregin said:
So, do we need to use version for CM 12.1 for OnePlus from here?
https://www.offensive-security.com/kali-linux-nethunter-download/
Ps
It works
First install kali kernel, after download Kali for oneplusone, reboot into recovery, install kali zip, and aftet again idle kali kernel.
I am on CM 12.1 nightly...
Click to expand...
Click to collapse
Why are you doing this!!! You're bound to end up breaking something.
All you do is flash this after completing CM setup wizard and you're done. There's absolutely no reason to download any other Kali installer. This is the full version 3.0! Nethunter app now sets up your chroot for you.
Full steps:
Flash CyanogenMod installer zip
Flash Gapps (preferably opengapps pico)
Boot into device
Complete setup wizard
Reboot into recovery
Flash the Galaxy Note 3 Kali Nethunter installer zip from this thread
Boot into device
You're done!
If you absolutely need ikconfig or /sbin/usb, then you can install idleKernel-kali zip from the idleKernel thread later.
3.0.1_2016_01_10 build uploaded. Just a bug fix for Nethunter app.
Installation query
I have CM13 set up with superSU 2.46 and idleKernel 6.5.5 installed.
Do I have to install CM all over again? And follow your steps, or is there a way for me to keep my data and just flash it as is?
UnbracedTundra said:
I have CM13 set up with superSU 2.46 and idleKernel 6.5.5 installed.
Do I have to install CM all over again? And follow your steps, or is there a way for me to keep my data and just flash it as is?
Click to expand...
Click to collapse
Make a full backup in twrp first.
Wipe /system and dalvik and /cache. Install latest CM13 (or CM12.1 if thats what you meant) zip and gapps, then boot into system. Once boot is complete, reboot into recovery and flash nethunter then boot and you should be good to go without deleting your data.
jcadduono said:
Why are you doing this!!! You're bound to end up breaking something.
All you do is flash this after completing CM setup wizard and you're done. There's absolutely no reason to download any other Kali installer. This is the full version 3.0! Nethunter app now sets up your chroot for you.
Full steps:
Flash CyanogenMod installer zip
Flash Gapps (preferably opengapps pico)
Boot into device
Complete setup wizard
Reboot into recovery
Flash the Galaxy Note 3 Kali Nethunter installer zip from this thread
Boot into device
You're done!
If you absolutely need ikconfig or /sbin/usb, then you can install idleKernel-kali zip from the idleKernel thread later.
3.0.1_2016_01_10 build uploaded. Just a bug fix for Nethunter app.
Click to expand...
Click to collapse
Wow...
I am idiot!
Completely ignored the main link I needed -
https://idlekernel.com/nethunter/cm12.1
Now I understand that went dangerous way, lucky still with working phone
Tbh, most all utilities in Kali for now behind my knowlage of Linux so far
PS
I can see some scripts somehow survived even with full wipe, now my recovery provide some red lines doing job, something path missing in /data/...something/something
Though do the job.
I thought nothing can survive after full wipe...
Code:
[B][COLOR="Red"]Your warranty is now void.[/COLOR][/B]
I am not responsible for bricked devices, dead SD cards. Please
do some research if you have any concerns about features included in this method
before apply it!
I also do not provide any warranty! The result of a failure could include voiding of warranty and hardware damage.
Be careful! Many of these commands have a high probability of resulting in a brick if mistyped.
What you’ll need
Backup your personal data. It is good idea backup your system with twrp too
Divice Lg V20 H990
Unlocked bootloader and rooted Device ([url]https://forum.xda-developers.com/v20/development/dirtysanta-h990-t3624296[/URL])
ADB (in Linux , windows)
twrp 3.2.1 recovery
New method(07-05-2018)
Here you have an only one zip rom. Flash via twrp, reboot and wait. Please be patient, you have to wait +-18mins.
Works
NFC
gps
call
sms
wifi
Bluetooth
Hotspot
Camera focus and good resolution
STEPs
Download: https://drive.google.com/drive/folders/1zZHGjigoPZq2VNjWAn-Lg4azlTst4UzW
flash
reboot
wait
Old Method
ISSUES
Bluetooth
Hotspot
Camera poor resolution
Other that you find
STEPs
Download Official Lianogeos 14 ROM and save in SDCARD (lineage-14.1-20180405-nighttly-h910-signed.zip)
Download neocore.zip kernel and save in SDCARD ([url]https://forum.xda-developers.com/v20/development/kernel-t3726416[/URL])
Save firmware wifi files (fw_bcm*) from your device (/system/etc/firmware) in your computer
Save configuration file (bcmdhd.cal) from your device (/system/etc/wifi) in your computer
Modify zip of rom to H990:
Open(not uncompress) with some zip program
go to META-INF/com/google
open and edit update-script: replace 910 by 990
save and close
Reboot into Twrp recovery, wipe system, data, cache
flash lineageos
Reboot into Twr
if twrp ask abot password, click cancel, go wipe and format data
flash neocore.zip
Reboot into Twrp
Push wireless firmware into your device (connect your device to pc):
virify your device is ready
Code:
adb devices
into via adb
Code:
adb shell
mount sytem partition
Code:
mount /dev/block/sda14 /mnt
push
Code:
exit
adb push fw_bcmdhd.bin /mnt/system/etc/firmware
adb push fw_bcmdhd_mfg.bin /mnt/system/etc/firmware
adb push fw_bcmdhd_apsta.bin /mnt/system/etc/firmware
adb push bcmdhd.cal /mnt/system/etc/wifi
Reboot into SYSTEM
Enjoy!
Does this work on a H990DS
faeterov said:
Does this work on a H990DS
Click to expand...
Click to collapse
I dont have h990ds but i tried installing SuperV20 custom rom (h990ds Stock-rom based) and that works in h990, MAYBE my solution works in h990ds
You should package the zip folder and is there a result for us to use old nightly ?
I have tried with 20180419 version and this worked fine
Hi,
Possible to package the whole zip ?
@x86cpu
The main point here is that could be posible compile lineageos for h990 only we have to be careful to configure kernel like neocore respect to mode to handle modem and using the correct firmware for gps
XolYnrac said:
The main point here is that could be posible compile lineageos for h990 only we have to be careful to configure kernel like neocore respect to mode to handle modem and using the correct firmware for gps
Click to expand...
Click to collapse
I'm trying build it
joaovictorsouza said:
I'm trying build it
Click to expand...
Click to collapse
Let me know to test
H990ds ???
Is there any H990ds developpement guys ???
So i heard you guys using my kernel for this but have issues with 2nd screen overflow, ill give a try to build one with the lineage patches to prevent overflowing of screen contents in the second screen.
Kernel compiled its in my neocore page, you guys could give it a test. Remeber have a back up, its the only build i have not personally tested cause im not on Lineage
https://forum.xda-developers.com/v20/development/kernel-t3726416
thirdzcee said:
Kernel compiled its in my neocore page, you guys could give it a test. Remeber have a back up, its the only build i have not personally tested cause im not on Lineage
https://forum.xda-developers.com/v20/development/kernel-t3726416
Click to expand...
Click to collapse
The lineage patches should work fine. the kernel I use for TWRP is stock based (which needs either Lineage's patches or manually adjusting twrp's config to stop the overflow), until recently it was 99% stock.
I still find it suss we haven't had any definitive response from someone who has flashed this to say whether or not it's working. No screenshots, anything.
thirdzcee said:
So i heard you guys using my kernel for this but have issues with 2nd screen overflow, ill give a try to build one with the lineage patches to prevent overflowing of screen contents in the second screen.
Click to expand...
Click to collapse
Hi, to me it isnot a disvantage, i consider that like a advantage because meaning we can manipulate the second screen. The task is that in the GUI layer add some area in the upper place, that would give us podinility to put anything in that area more than simple shortcut.
I am speculating because i dont know android architecture.
The other task is identify how neocore handle the modem and introduce that in lineageos kernel.
Yesterday i compiled lineageos based on a installation like this thread. When i installed that i only had problem with modem, wifi worked fine
iDefalt said:
I still find it suss we haven't had any definitive response from someone who has flashed this to say whether or not it's working. No screenshots, anything.
Click to expand...
Click to collapse
I coul give you a screenshot runnig lineageos on my h990.
@XolYnrac
Have you tried using the ported Google Camera to see if the camera resolution / quality issues are resolved?
https://www.celsoazevedo.com/files/android/google-camera/
You could probably try a LOS compatible one, or something by cstark or BSG
jl10101 said:
@XolYnrac
Have you tried using the ported Google Camera to see if the camera resolution / quality issues are resolved?
https://www.celsoazevedo.com/files/android/google-camera/
You could probably try a LOS compatible one, or something by cstark or BSG
Click to expand...
Click to collapse
I will try that but I have tried with that https://forum.xda-developers.com/lg-v30/themes/cstark27-google-camera-mod-wide-angle-t3747263 the resolution is good but the focus isnt work
I'll test in H990DS. I'm building again LineageOS with the H910 binaries.
Here my own compilation of lineageos for h990 with neocore kernel.
In the screenshot we can see the complity screen but I cant see the upper left corner in the cellphone because in this part are the camera and sensors
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS :
******* FULL WIPE IS REQUIRED, if you are coming from stock or Lineage 14.1 *****
******* You have to use adb commands in recovery (ex. adb push / adb shell twrp install) ******
Download the latest build and gapps
Boot to twrp ("fastboot boot recovery.img" - you can't flash twrp yet image is to big for partition)
Flash the latest build
To flash opengapps you need to put this txt file (https://androidfilehost.com/?fid=6006931924117891960) in the same directory (or you will get an error related to partition size)
this discard some apps from installation, but you can always install later from play store.... (Fixed with custom tvmini gapps)
Reboot
* If you are coming from stock rom you need to unlock your bootloader before flash twrp
** In Lineage Setup Wizard you can pair you Razer Serval or any other remote/gamepad device putting in discovery mode (autopair) or you can use an HDMI-CEC enabled TV.
BUGS:
- Secure L1 playback is broken (No Netflix, etc...)
- Remote App Voice search is broken (Fixed on 6/10 build + custom gapps)
- Some times the screen goes off and won't wake up with CEC, you can turn on the screen with your BT device or the ATV app.
- You tell me
TWRP: https://androidfilehost.com/?fid=6006931924117891945
Latest Build (October 6): https://androidfilehost.com/?w=files&flid=178900
Google Apps : https://androidfilehost.com/?w=files&flid=300260
XDA:DevDB Information
[ROM] [UNOFFICIAL] LineageOS 16.0 for Razer Forge TV (pearlyn), ROM for the Android Stick & Console Computers
Contributors
gabrielgagz, fgl27
Source Code: https://github.com/gabrielgagz/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2019-06-10
Last Updated 2019-06-11
Hi, thanks, all works great, only volume control not working, if you fix it, thats would be awesome.
Does Google Play Movies and TV work?
In the step "Boot to twrp ("fastboot boot recovery.img" - you can't flash twrp yet image is to big for partition)", my device stuck in boot screen or it'll boot into normal mode.
Could you give me more detailed instruction?
Thank you!
ClemmerC said:
Does Google Play Movies and TV work?
Click to expand...
Click to collapse
Yes, it's working
DHD said:
In the step "Boot to twrp ("fastboot boot recovery.img" - you can't flash twrp yet image is to big for partition)", my device stuck in boot screen or it'll boot into normal mode.
Could you give me more detailed instruction?
Thank you!
Click to expand...
Click to collapse
First of all you need to boot into fastboot mode (adb reboot fastbot), downoad the recovery file provided here: https://androidfilehost.com/?fid=6006931924117891945
While on fastboot, you have to execute the command "fastboot boot /path/to/recovery.img"
New build is up, remote voice search is fixed, please re install gapps with the custom provided in Google Apps link.
gabrielgagz said:
New build is up, remote voice search is fixed, please re install gapps with the custom provided in Google Apps link.
Click to expand...
Click to collapse
Would Netflix work through Chrome or a browser? Thinking I could turn my Forge into a little desktop running android.
skurtov said:
Would Netflix work through Chrome or a browser? Thinking I could turn my Forge into a little desktop running android.
Click to expand...
Click to collapse
No, You can't load Netflix trough Android Webview or browsers. User Agent and DRM stuff...
Enviado desde mi Mi A2 mediante Tapatalk
Hi gabrielgagz, thanks for the great work.
I try to compile it but get errors.
Code:
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2275:32: error: unused parameter 'ctx' [-Werror,-Wunused-parameter]
void setGPUHint(hwc_context_t* ctx, hwc_display_contents_1_t* list) {
^
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2275:63: error: unused parameter 'list' [-Werror,-Wunused-parameter]
void setGPUHint(hwc_context_t* ctx, hwc_display_contents_1_t* list) {
^
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2591:32: error: unused parameter 'ctx' [-Werror,-Wunused-parameter]
bool loadEglLib(hwc_context_t* ctx) {
^
What am I doing wrong ?
Think my forge is a brick now
I just installed the rom and it seemed to have skipped the initial setup so i couldn't sync my serval remote, but whatever i can use a usb mouse right? nope i cant use the android tv remote app either cant seem to adb into it but it seems to be in "device" mode my pc picks it up as android adb device but cant do anything any suggestions? i dont even have gapps installed yet.
stuck on boot logo
I followed the instructions use wipe in twrp first then install lineage zip and gapps zip both successfully in twrp. Cleared cache/dvlac. rebooted but stuck on boot logo, unplugged box several times and also let it run for over 60 minutes. I redownloaded and tried 2 times more. what could I have missed that would prevent Lineage from loading? do i have to do anything additional to the bootloader after reboot? Im using the 20191009 version any tips would be super swell
razorNoob said:
Hi gabrielgagz, thanks for the great work.
I try to compile it but get errors.
Code:
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2275:32: error: unused parameter 'ctx' [-Werror,-Wunused-parameter]
void setGPUHint(hwc_context_t* ctx, hwc_display_contents_1_t* list) {
^
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2275:63: error: unused parameter 'list' [-Werror,-Wunused-parameter]
void setGPUHint(hwc_context_t* ctx, hwc_display_contents_1_t* list) {
^
hardware/qcom/display-caf/apq8084/libhwcomposer/hwc_utils.cpp:2591:32: error: unused parameter 'ctx' [-Werror,-Wunused-parameter]
bool loadEglLib(hwc_context_t* ctx) {
^
What am I doing wrong ?
Click to expand...
Click to collapse
This come from Lineage sources, not from device/vendor tree. Are you trying to compile 16.0?
LOGICH4CK said:
I just installed the rom and it seemed to have skipped the initial setup so i couldn't sync my serval remote, but whatever i can use a usb mouse right? nope i cant use the android tv remote app either cant seem to adb into it but it seems to be in "device" mode my pc picks it up as android adb device but cant do anything any suggestions? i dont even have gapps installed yet.
Click to expand...
Click to collapse
Maybe a soft brick. Please provide a logcat "adb shell logcat"
finebf20 said:
I followed the instructions use wipe in twrp first then install lineage zip and gapps zip both successfully in twrp. Cleared cache/dvlac. rebooted but stuck on boot logo, unplugged box several times and also let it run for over 60 minutes. I redownloaded and tried 2 times more. what could I have missed that would prevent Lineage from loading? do i have to do anything additional to the bootloader after reboot? Im using the 20191009 version any tips would be super swell
Click to expand...
Click to collapse
Is your bootloader unlocked? If so, please provide a "adb shell logcat"
Success
Thanks for your response. Sorry for delay i was on vacation. I figured it out. The zip got corrupted durning download. Redownloaded and flashed, rebooted and loaded into Lineage. So far im very impressed with your build! I will post general steps i dit to get working since i got bits from several sites and pieced together what worked for me.
gabrielgagz said:
This come from Lineage sources, not from device/vendor tree. Are you trying to compile 16.0?
Click to expand...
Click to collapse
Yes LOS 16.0 source.
razorNoob said:
Yes LOS 16.0 source.
Click to expand...
Click to collapse
It's been a while since i don't sync or compile 16.0 (i'm mostly working on Android 10). Stupid question, are you using the correct branch for kernel (lineage-16.0)?
Thanks for the reply
gabrielgagz said:
Is your bootloader unlocked? If so, please provide a "adb shell logcat"
Click to expand...
Click to collapse
Hi sorry been busy I've tried the command but all it says in the terminal is no adb devices, my bootloader is unlocked. I've tried a different USB device in hopes of some control but so far nothing
Edit:
it seems I can use internet Via Ethernet
LOGICH4CK said:
Hi sorry been busy I've tried the command but all it says in the terminal is no adb devices, my bootloader is unlocked. I've tried a different USB device in hopes of some control but so far nothing
Edit:
it seems I can use internet Via Ethernet
Click to expand...
Click to collapse
You can always wipe your data/cache. Plug your Forge into fastboot mode (no hdmi cable, and usb cable connected to your pc) type "fastboot boot recovery.img" boot into twrp and do the wipe:
adb shell twrp wipe data/cache
Try to boot again, if that doesn't work, re-flash rom and opengapps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Big thanks goes to @Steel01 for all the hard work and the Sources.
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Hi Everyone
After some months of learning how to build my own Roms and how to edit the proprietary files of this Device i was able to build my first edited version of LineageOS 15.1 with HW Acceleration and the Camera working.
Its a slim an snappy Rom for everyone that´s looking for a monthly updated Android 8.1 Rom to keep this unique Device alive.
This first release is really basic because i deleted everything that doesn't work right.
My plans for this Rom are to keep it updated in case of Security Patches and add some Features here and there as i still learn how this Device and Android is working in general.
Also the official release of LineageOS 16 will end the development of this Rom for the reason i don't want to rival the official contributors of this Device.
Little FAQ to this Rom:
Do i need to Wipe my existing Rom even its LineageOS 15.1 based ?
Yes because i use my own Release Keys for this Rom you need to Wipe your existing one.
Is this Rom compatible with every Shield Tablet ?
Yes this Rom is working with every Shield Tablet
I have a Shield LTE Version and after flashing this Rom i cant connect my device for Data Transfer with my computer anymore.
For some Reason i still didnt found out on LineageOS 15.1 there is no Drop Down Menu for this Device to change the type of connection.
To change it go to Settings > Connected Devices > USB
I found a Bug with this Rom i didnt had on any Rom before what should i do before i post it here ?
Before you post any Bugs and Errors here make sure you installed this Rom correct as i told with a full wipe in your recovery first and if there are modifications installed like Magisk
Moduls or Xposed or you changed this Rom in any way, you should reinstall it fresh first to take a look if the issue still occurs.
If yes post a detailed report of the Error with a Logcat.txt File
Can i install and use Apps like Netflix, Amazon Prime,.. and watch content in HD again with this ROM ?
As this is a Problem with the Widevine Services and this Device itself this Rom doesn´t change anything on that. If you want to use the Netflix App for example you still have to use the liboemdecrypt modul on Magisk and its SD only
Thanks goes to:
@Steel01 and the whole LOS Team for doing all the hard work to keep this Device alive
@Artemka2008 for figuring out the OMX fix
@Triodexe for uploading his work on his Github so i could figure out how to edit the vendor files
@john_matrix for teaching me how to set up my build enviroment and being really helpful when i´m stuck with errors
Requirements:
Bootloader Unlock
Bootloader Version 4.00.2016.04
Custom Recovery installed (use Version 9.5.0_9-0 of TWRP or Lineage Recovery)
Instructions:
Download the latest build and gapps if needed (8.1 / arm / pico)
Reboot to recovery and wipe your existing Rom
Flash the latest build and gapps
Reboot
Downloads:
Builds : https://www.androidfilehost.com/?w=files&flid=325335
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
Firmware Update : N/Stock 5.0
Whats working now:
HW Acceleration
Snap Camera
Whats still not working:
Nvidia Games App (Deleted)
Console Mode UI (Deleted but HDMI still working fine)
Encryption (will lead to a Bootloop if tried)
Screen Mirroring ( In App Cast like on the Youtube App still working fine)
Contributors:
@Steel01
Source Code: https://github.com/LineageOS
@Scavenger87
Device: https://github.com/Scavenger-87/android_nvidia_device_shield-common
https://github.com/Scavenger-87/android_device_nvidia_shieldtablet
Vendor: https://github.com/Scavenger-87/android_vendor_nvidia_shield
ROM OS Version: 8.1 Oreo
ROM Kernel: Linux 3.10.96+
Version Information:
Status: userdebug
SELinux: Enforcing
Security Patch: 5.10.2021
Build Signature: Own Release Key
Created 14.05.2021
Last Updated 18.10.2021
Scavenger87 said:
View attachment 5308899
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Big thanks goes to @Steel01 for all the hard work and the Sources.
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Hi Everyone
After some months of learning how to build my own Roms and how to edit the proprietary files of this Device i was able to build my first edited version of LineageOS 15.1 with HW Acceleration and the Camera working.
Its a slim an snappy Rom for everyone that´s looking for a monthly updated Android 8.1 Rom to keep this unique Device alive.
This first release is really basic because i deleted everything that doesn't work right.
My plans for this Rom are to keep it updated in case of Security Patches and add some Features here and there as i still learn how this Device and Android is working in general.
Also the official release of LineageOS 16 will end the development of this Rom for the reason i don't want to rival the official contributors of this Device.
Little FAQ to this Rom:
Do i need to Wipe my existing Rom even its LineageOS 15.1 based ?
Yes because i use my own Release Keys for this Rom you need to Wipe your existing one.
Is this Rom compatible with every Shield Tablet ?
Yes this Rom is working with every Shield Tablet
I have a Shield LTE Version and after flashing this Rom i cant connect my device for Data Transfer with my computer anymore.
For some Reason i still didnt found out on LineageOS 15.1 there is no Drop Down Menu for this Device to change the type of connection.
To change it go to Settings > Connected Devices > USB
I found a Bug with this Rom i didnt had on any Rom before what should i do before i post it here ?
Before you post any Bugs and Errors here make sure you installed this Rom correct as i told with a full wipe in your recovery first and if there are modifications installed like Magisk
Moduls or Xposed or you changed this Rom in any way, you should reinstall it fresh first to take a look if the issue still occurs.
If yes post a detailed report of the Error with a Logcat.txt File
Can i install and use Apps like Netflix, Amazon Prime,.. and watch content in HD again with this ROM ?
As this is a Problem with the Widevine Services and this Device itself this Rom doesn´t change anything on that. If you want to use the Netflix App for example you still have to use the liboemdecrypt modul on Magisk and its SD only
Thanks goes to:
@Steel01 and the whole LOS Team for doing all the hard work to keep this Device alive
@Artemka2008 for figuring out the OMX fix
@Triodexe for uploading his work on his Github so i could figure out how to edit the vendor files
@john_matrix for teaching me how to set up my build enviroment and being really helpful when i´m stuck with errors
Requirements:
Bootloader Unlock
Bootloader Version 4.00.2016.04
Custom Recovery installed (use Version 9.5.0_9-0 of TWRP or Lineage Recovery)
Instructions:
Download the latest build and gapps if needed (8.1 / arm / pico)
Reboot to recovery and wipe your existing Rom
Flash the latest build and gapps
Reboot
Downloads:
Builds : https://www.androidfilehost.com/?w=files&flid=325335
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
Firmware Update : N/Stock 5.0
Whats working now:
HW Acceleration
Snap Camera
Whats still not working:
Nvidia Games App (Deleted)
Console Mode UI (Deleted but HDMI still working fine)
Encryption (will lead to a Bootloop if tried)
Screen Mirroring ( In App Cast like on the Youtube App still working fine)
Contributors:
@Steel01
Source Code: https://github.com/LineageOS
@Scavenger87
Device: https://github.com/Scavenger-87/android_device_nvidia
Vendor: https://github.com/Scavenger-87/android_vendor_nvidia_shield
ROM OS Version: 8.1 Oreo
ROM Kernel: Linux 3.10.96+
Version Information:
Status: userdebug
SELinux: Enforcing
Security Patch: 5.5.2021
Build Signature: Own Release Key
Created 14.05.2021
Last Updated 14.05.2021
Click to expand...
Click to collapse
Thank You for breathing new life into this great little tablet!
Thanks for keep this device alive!
Any ideas why clash of clans will not work on this ROM? Installed COC from Amazon App Store right after flashing this ROM and the game closes with no error right after it fully loads at the loading screen. Tried Lineage OS 16.0 and had the same exact issue using the google play store version with pico opengapps. I just want to use a smooth running ROM and play clash also QQ. Clash ran like trash on the stock 7.0 rom even after doing everything possible to make the tablet smoother.
Thank you very much and nice job Scavenger for keeping our tablet up and running!
Tried this ROM and was very happy to finally see one above Nougat on my shield tablet k1 that has 1080p 60 FPS videos playing smooth with no artifacts and doesn't crash. Also super smooth. Very nice, congratulations and many thanks.
However after I rebooted to recovery and flashes magisk it got stuck forever on Nvidia logo
Wiped everything again, reinstalled (ROM and gapps) and it booted without magisk. Tried flashing magisk again, same problem
I never had this issue with magisk before on this tablet (and I've tried several ROMs).
Anyone else faced this issue? Any advice?
@ogremalfeitor How do you tried to install Magisk? Refer https://topjohnwu.github.io/Magisk/install.html
What would be the right way to install it?
@Scavenger87 Besides your LOS build we find also a recovery.img at androidfilehost.com - do we have to patch this one with the Magisk app? I never tried the LOS recovery before.
marrol said:
@ogremalfeitor How do you tried to install Magisk? Refer https://topjohnwu.github.io/Magisk/install.html
What would be the right way to install it?
@Scavenger87 Besides your LOS build we find also a recovery.img at androidfilehost.com - do we have to patch this one with the Magisk app? I never tried the LOS recovery before.
Click to expand...
Click to collapse
I tried many ways.
Usually with the latest magisk versions I rename the APK to ZIP and install it via TWRP (you can't do that with normal APKs but magisk one is special). This method has worked for me with other ROMs. From then on, when there are Magisk updates, I use the magisk manager app.
Meanwhile I tried dumping the boot partition from TWRP and use the manager to patch it, then flash it via fastboot. Same problem. If I then flash the unmodified boot image back, the system boots fine.
I'm now trying everything again, with the 3.5.0_9-0 version of TWRP (I had 3.4.0 installed). Also I was using aroma opengapps (costumizing what I want), I'm now going to try with pico as said in the first post. Will post back results.
ogremalfeitor said:
I tried many ways.
Usually with the latest magisk versions I rename the APK to ZIP and install it via TWRP (you can't do that with normal APKs but magisk one is special). This method has worked for me with other ROMs. From then on, when there are Magisk updates, I use the magisk manager app.
Meanwhile I tried dumping the boot partition from TWRP and use the manager to patch it, then flash it via fastboot. Same problem. If I then flash the unmodified boot image back, the system boots fine.
I'm now trying everything again, with the 3.5.0_9-0 version of TWRP (I had 3.4.0 installed). Also I was using aroma opengapps (costumizing what I want), I'm now going to try with pico as said in the first post. Will post back results.
Click to expand...
Click to collapse
No luck, same problem
Root addon from lineage os works, but fails safety net check pretty badly and does not support modules like Magisk...
@Scavenger87 do you have any advice to get Magisk working with this ROM? Are there any place logs are generated when the tablet is booting on the nvidia logo where mine is getting stuck? Thanks in advance.
Hello,
I have a question.
What should i Do with
Firmware Update : N/Stock 5.0
I have installed the Rom and the Gapps. And IT runs, on My K1
summerstyle said:
Hello,
I have a question.
What should i Do with
Firmware Update : N/Stock 5.0
I have installed the Rom and the Gapps. And IT runs, on My K1
Click to expand...
Click to collapse
It's just there for people that might have an outdated stock firmware. If it worked for you without it, you don't need it. Someone correct me if I'm wrong
ogremalfeitor said:
No luck, same problem
Root addon from lineage os works, but fails safety net check pretty badly and does not support modules like Magisk...
@Scavenger87 do you have any advice to get Magisk working with this ROM? Are there any place logs are generated when the tablet is booting on the nvidia logo where mine is getting stuck? Thanks in advance.
Click to expand...
Click to collapse
Maybe we have to patch boot.img from NVidia Stock Recovery 5.2 and flash this one?
ogremalfeitor said:
It's just there for people that might have an outdated stock firmware. If it worked for you without it, you don't need it. Someone correct me if I'm wrong
Click to expand...
Click to collapse
This is a separate blob update. What for do we need this?
marrol said:
Maybe we have to patch boot.img from NVidia Stock Firmware 5.2 and flash this one?
Click to expand...
Click to collapse
That's not it. The boot.img is unique to every ROM. It contains the kernel and the initial ramdisk (initrd, if you're interested in details search for that and there are a lot of interesting articles explaining the boot process of Linux and derivates like Android).
I know magisk modifies the initrd to sort of "inject" itself during that early boot process, but it doesn't make the system hang with other ROMs, hence before assuming it's a bug in magisk I'd like to know if anyone has any idea or if the ROM is missing anything that could cause this?
marrol said:
This is a separate blob update. What for do we need this?
Click to expand...
Click to collapse
I believe it has to do with outdated bootloaders, which will be the case for people who never used recent stock firmwares, and it's there should you have problems (but don't confuse bootloader with boot partition or boot.img that I mentioned in another post). I think the script in the Zip detects it when you flash in twrp and gives an error if necessary but please correct me if I'm wrong.
I have try to installed the Firmware Update : N/Stock 5.0 in TRWP. It doesnt work. A Error Shows and it cant installed.
Well meanwhile I went on and started using this ROM without magisk. Started to have crashes here and there not long after, like most (if not all) ROMs for my tablet above android 7... until the video started to get corrupted in YouTube Vanced too which is a deal breaker for me.
Guess this is not the one ROM to solve my problems with this tablet after all, but still it's a great effort. Hope others enjoy it and thanks to the dev for sharing.
Hi everyone after a little vacation and some testing out of your reported issues this is what i found out so far:
Hworangg said:
Any ideas why clash of clans will not work on this ROM? Installed COC from Amazon App Store right after flashing this ROM and the game closes with no error right after it fully loads at the loading screen. Tried Lineage OS 16.0 and had the same exact issue using the google play store version with pico opengapps. I just want to use a smooth running ROM and play clash also QQ. Clash ran like trash on the stock 7.0 rom even after doing everything possible to make the tablet smoother.
Click to expand...
Click to collapse
I installed that game on a Tablet with LOS 14.1 and LOS 15.1 and in both cases the Game crashes because it run out of memory. I did a quick test on my Rom with adding ro.config.low_ram=true to the build.prop which activate the Go Version of Android and decreased the usage of Ram this way .
The Game runs but it started to get really sluggish after around 30 seconds.
It seems this Game just needs more than the 2GB Ram this device can offer.
ogremalfeitor said:
Tried this ROM and was very happy to finally see one above Nougat on my shield tablet k1 that has 1080p 60 FPS videos playing smooth with no artifacts and doesn't crash. Also super smooth. Very nice, congratulations and many thanks.
However after I rebooted to recovery and flashes magisk it got stuck forever on Nvidia logo
Wiped everything again, reinstalled (ROM and gapps) and it booted without magisk. Tried flashing magisk again, same problem
I never had this issue with magisk before on this tablet (and I've tried several ROMs).
Anyone else faced this issue? Any advice?
Click to expand...
Click to collapse
After trying to flash many Versions of Magisk starting by 21.4 over 22.0 and the actual 23.0 via the TWRP Recovery Version (9.5.0_9-0) i mentioned in the Start Thread and trying to flash it with the Magisk App i also wasnt able to install Sucessfully Magisk without running into a Bootlop which is really a Bummer.
I dont know why this happends and i check my Kernel Logs i pulled with TWRP but for the moment we have to use the SU Addon by LOS.
Maybe it has something to do with that my build is signed with a personal key i will check that out.
summerstyle said:
I have try to installed the Firmware Update : N/Stock 5.0 in TRWP. It doesnt work. A Error Shows and it cant installed.
Click to expand...
Click to collapse
Thats just the Blob File that needs to be flashed when the Bootloader isnt updated to the latest Version (4.00.2016.04)
ogremalfeitor said:
Well meanwhile I went on and started using this ROM without magisk. Started to have crashes here and there not long after, like most (if not all) ROMs for my tablet above android 7... until the video started to get corrupted in YouTube Vanced too which is a deal breaker for me.
Guess this is not the one ROM to solve my problems with this tablet after all, but still it's a great effort. Hope others enjoy it and thanks to the dev for sharing.
Click to expand...
Click to collapse
On some rare ocassions you get those same green artefacts on videos like you get with the LOS 16.0 Rom but at least in my case it happends once a week or so and it seems it have something to do with memory managment again.
My guess is that the tegra drivers arent working really well with Android Versions above Nougat (7.0) and this leads to a memory leak but like i said its just a guess by me maybe @Steel01 can say more about that.
I try to optimize the memory management in the future builds if possible.
Hi Everybody
I think its time to give you a little update of my work on this build
After i got a good example of the problems with the ram management of this device i was looking for a solution last few days and i began testing with the Android Go Settings as i mentioned in the last Thread.
With that settings i was able to start that Game mentioned by @Hworangg and i even was able to play it a bit as you can see on one of the added Screenshots below. But you could also see this Game is a real RAM Hog with needing up to 484MB at the last session i played but it is kinda playable you just have to stay in that Game and turn off every notification as it might crashes otherwise. Speaking of crashes while the GO Settings really helping on reduce the usage of Ram by the System itself and let the device take more Memory Pressure it also leads to freezes where you often have to Hard Reset the Tablet because it seems to not close the Main App when its in a Out of Memory Situation. This is something i have to invest more time and research even after i played a lot with the Dalvik VM Settings.
I also found out that my Personal Key Signature is the reason that the install of Magisk is leading to a Bootloop. Here i also have to figure out why this is happen and if its even possible to install Magisk on a Signed Custom Rom as you change out the BOOT.img on this Device to achieve that and it seems the Magisk installer isnt able to resign the File with my Key.
TLDR:
I was able to set up my Build to use the optimized Android GO Settings to withstand more Memory Pressure so that Games like COC and heavy Browsing Sessions with lots of Tabs and Sites with a lot of Pictures doesn't crash that soon but it lead in both cases to a freeze of the whole Device.
The Magisk installer does not work when i sign my build with my own key.
For this Reason i decided to release a another Build for you to test with this Settings as a Nightly Release before i release my next Regular Build when the next Security Patch is out
You find it here : Nightly Build and i´m curious about your opinion.
Flashed the nightly onto a freshly wiped K1 along with opengapps and Magisk 23 using patched boot, no problems there. Video playback - Netflix played about as well as it could with level 3 widevine, with Jellyfin no obvious visual problems streaming 1080p over lan. Got hard freezes when running memory heavy apps (firefox, manga reader, 3d unity games) but it was expected.
Ended up downgrading back to factory stock Lollipop as the memory management is best there, even better than stock Nougat. But will keep an eye on your builds because the K1 could still be a great little tablet if the memory issues in newer versions of Android was fixed. Thank you for your hard work
crDroid Android is a free firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
crDroid is based on the LineageOS & Android Open Source Project with extra contributions from many people within the Android community.
All the source code for crDroid is available in the crDroid GitHub repo
Basic requirements:
Unlock your bootloader, make sure you are on Android 13 firmware (tested over 61.2.A.0.410)
Make sure you can send and receive SMS and receive calls (also via WiFi and LTE, if possible). It would be better for you to get VoLTE/VoWiFi utilized once on stock to provision IMS
Currently tested on XQ-BQ52 (Global version)
Current build has no Gapps built-in so it's up to you either to stay Gapps-less or flash Gapps version you want (I would recommend NikGapps personally)
Make sure you have gone through the installation guide once before proceed!
Installation:
Flash additional partitions and recovery.
Download the following files from the download link:
dtbo.img
vendor_boot.img
boot.img
Connect your device to your PC via USB if isn't already
If your device is not already in fastboot mode, on the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
Bash:
adb reboot bootloader
Flash the downloaded image files to your device by typing:
Bash:
fastboot --set-active=a
fastboot flash dtbo_a <dtbo>.img
fastboot flash vendor_boot_a <vendor_boot>.img
fastboot flash boot_a <boot>.img
Now reboot into recovery to verify the installation:
Bash:
fastboot reboot recovery
Installing ROM from recovery
Download the crDroid installation package that you would like to install from the download link
If you are not in recovery, reboot into recovery
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu
Sideload the crDroid package
On the device, select "Apply Update", then "Apply from ADB" to begin sideload
On the PC, sideload the package using:
Bash:
adb sideload filename.zip
Return to the main menu
(Optionally) If you want to install any add-ons (Gapps, Magisk..), click "Advanced", then "Reboot to Recovery", then when your device reboots, click "Apply Update", then "Apply from ADB", then "adb sideload filename.zip" those packages in sequence.
Once you have installed everything successfully, click the back arrow in the top left of the screen, then "Reboot system now"
Downloads:
https://sourceforge.net/projects/xperia5iii/files/crdroid13/
Device Trees & Kernel Source:
https://github.com/faust93/android_device_sony_sm8350-common
https://github.com/faust93/android_device_sony_pdx214
https://github.com/xperiaossdev/kernel_sony_sagami
Build Information
Device: Xperia 5 III (pdx214)
Build Type: Unofficial
ROM OS Version: 13
Kernel Version: 5.4.219-Krispy-v1.2
Kudos:
@Sakuu
@clfbbn
Changelog
2023-04-27:
- crDroid v9.4
- kernel side tuning and optimisations
2023-04-15:
- crDroid sources repo sync
- performance optimizations
- HW assistant button gestures fix: single, long, double click works and can be re-assigned
Geez, our first custom ROM! Thank you very much for your efforts :^)
Any list of what's working and not working?
Gray47Maxx said:
Geez, our first custom ROM! Thank you very much for your efforts :^)
Any list of what's working and not working?
Click to expand...
Click to collapse
My daily driver for about a week now. Haven't found any problems so far. Seems everything to be working. But for sure we need more testing..
faust93 said:
My daily driver for about a week now. Haven't found any problems so far. Seems everything to be working. But for sure we need more testing..
Click to expand...
Click to collapse
Neat! Based on stock, I guess?
Gray47Maxx said:
Neat! Based on stock, I guess?
Click to expand...
Click to collapse
Well, it's not GSI if that's what you meant. Closed source proprietary blobs are taken from stock ROM, otherwise just fully-fledged build from crDroid sources.
faust93 said:
Well, it's not GSI if that's what you meant.
Click to expand...
Click to collapse
Not exactly. There's an initiative called SODP which provides all the necessities and binaries to build anything you want. Alas, usually it's not stable enough, especially on newer devices with hard configurations (like with our periscope camera).
Anyway, gonna test crDroid today and report anything I'd find interesting or worth noting
Gray47Maxx said:
Not exactly. There's an initiative called SODP which provides all the necessities and binaries to build anything you want. Alas, usually it's not stable enough, especially on newer devices with hard configurations (like with our periscope camera).
Anyway, gonna test crDroid today and report anything I'd find interesting or worth noting
Click to expand...
Click to collapse
Aah, I see. It's my first SONY device so I'm not aware about all the nuances yet No, it's not SODP based build.
thanks very nice rom
Good work, btw might want to do a rebuild with the newest Krispy version, major speedups on the 1 III that's running Krispy-v1.2.1 plus some battery life improvement, maybe I'll do 5 III builds too, if I get any testers that is.
Just installed this. Feels like I've been waiting ages for a custom ROM, and now here it is!
So far it seems too good to be true, not a single issue yet.
Sakuu said:
Good work, btw might want to do a rebuild with the newest Krispy version, major speedups on the 1 III that's running Krispy-v1.2.1 plus some battery life improvement, maybe I'll do 5 III builds too, if I get any testers that is.
Click to expand...
Click to collapse
Will test later today. Curious to see if refresh rate can be locked @ 120hz. The GSI builds I tried on A11 and A12 were stuck at 60
bhow11 said:
Will test later today. Curious to see if refresh rate can be locked @ 120hz. The GSI builds I tried on A11 and A12 were stuck at 60
Click to expand...
Click to collapse
Of course you can lock that dunno if he added the stuff for the refresh rate qs tile though
Sakuu said:
Of course you can lock that dunno if he added the stuff for the refresh rate qs tile though
Click to expand...
Click to collapse
Just a prop edit?
bhow11 said:
Just a prop edit?
Click to expand...
Click to collapse
Not even that, i think you can turn it on from the settings, but qs tile is more convenient
All good thus far
Will google wallet work with this ROM?
dima_vy said:
Will google wallet work with this ROM?
Click to expand...
Click to collapse
For me it works. Magisk Delta does the trick.
After using it for a few days, it is very stable and smooth, the battery performance is also great, thank you for your efforts
Cannot get Photo Pro and other sony app running after install sony framework in Magisk delta. Any one else has the same issue?