Related
Is the seidio innocase II case still interfering with the screen protector?
Any retail stores carrying any brand name cases? (nyc)
Also anybody with actual pics of anti-glare SPs please share i currently have a mirror SP but im looking in to a anti-glare,
(anti-glare protectors make it so that people next to you arent able to see anything right?)
*If anybody wants to help me out i am undecided on a case between the innocase II or the tough case (case-mate) or the gelli case (case-mate) any actual pics of any of these cases would be greatly appreciated pros an cons also just any feedback from actual owners would be good...(i have done plenty research on these cases an im still undecided so any help would be appreciated well its not help more like suggestions thanks...)
carlost24 said:
Is the seidio innocase II case still interfering with the screen protector?
Click to expand...
Click to collapse
only slightly with mine. just a little "lifting" / bubble on the lower left edge of my screen protector. it's a great case though.
Any picture? Is that only if the SP is perfect size an covers every inch of the screen or it doesnt matter if the SP is a couple mm off the sides it still happens?
-------------------------------------
Sent via the XDA Tapatalk App
I don't know what case buy, I like this case mate too
I like this case better and I own the SI2 case
I like this case better and I own the SI2 case
Click to expand...
Click to collapse
What makes it better than the SI2?
-------------------------------------
Sent via the XDA Tapatalk App
DiGWeeD2 said:
I don't know what case buy, I like this case mate too
Click to expand...
Click to collapse
Its a great case. I wish they sold them in stores.
Anybody want to help with the other questions?
-------------------------------------
Sent via the XDA Tapatalk App
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
So if i purchase the innocase II how would i go about sanding it?, Just get some sand paper an rub against the edges? Till i see it not interfering or what?
-------------------------------------
Sent via the XDA Tapatalk App
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Does anybody know if Seidio makes cases to go over their extended batteries? I do not see one (yet) for the Nexus, but they have a banner saying to look for new and exciting accessories.
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Click to expand...
Click to collapse
But does it interfere with the SP, does it mess it up?
Anybody???
i've attached some photos of my phone and case. sorry for the poor photos as i tried to take it in macro mode w/o flash and i have no tripod. also, bear in mind that these are pictures after i had sanded the case edge.
the first pic is with the case on. i tried to highlight how the edge of case meets the screen edge. the second and third, with the case off, exhibit the Best Skin Ever screen protector and how it was affected by the case. when i put on the Seidio case initially the, ridge/rail on the case (seen in the fourth photo), scratched the protector and caused it to peel.
keep in mind, i also had a laminate on the battery cover at that point so it was a bit of a tight squeeze as the case is designed to fit the N1 very well. however, even after removing the skin from the battery cover, putting the case on/off still caused the screen protector to peel. if you're only installing the case once and don't intend to remove it frequently, i guess you this issue may not bother you. however, i wanted to remove my case (or at least slide it open) every night to charge w/ the N1 dock.
i subsequently sanded the edge of the case (4th pic). i sanded the side and posterior aspects with some sand paper. now, sliding the case on/off does not affect the screen protector and i have some new laminate being shipped to replace the current one (although it works fine).
i hope that helps!
thanks man i really appreciated.
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
Click to expand...
Click to collapse
Is not about the bubbles its about the edges of the screen protector on the sides people are saying the sides of the case ride up on the SP an mess it up as pictured above
I have literally done this exact process but in using cheap eBay screen covers instead of the phantomskinz bodyprotector had
vexingv said:
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
mine made it start to peel up if you werent real careful to flex it and get it on top
stopped using mine due to it not fitting in dock
Hi xdas,
I just ordered my Nexus 4, finally!!, and i want to get some protection for my baby when it delivers. I am looking for a full screen protector film for front and back or even sides, and a bumper case, for a cheap and reasonable quality product. The official Nexus 4 bumper case is priced too high for a case, so i decided to look for other options. I would like to hear some suggestions on the full film screen protector and bumper case, and i would prefer to buy it from ebay or amazon or the company's official website, because i do not trust unknown sites.
The few products i found for bumper cases are:
Poetic Borderline Bumper Case - $9.95
Shenit Bumper Case - $14.95 (Not sure about this, seems unknown)
for full film screen i found:
XtremeGuard Full Body screen protector shield - $3.99 or $4.99
Skinomi TechSkin for Nexus 4 - $12.99
ZAGG invisibleSHIELD for Nexus 4 - Full Body ($20.96) vs Maximum Coverage ($20.65) I do not know if the Maximum is better because it might interfere with buttons and other holes because it is not cut properply
Note: Can anyone tell me also if *wet* application is good, because i read some reviews that it damages the phone, and you have to dip it in soap, yikes, a phone in water i think its going to damage it.
Can you guys recommend me to some other alternatives other than the one i posted and if also you can give me reviews on those i posted?
Thanks so much in advance!
*Edit: I added the links for each item.
BUMP! any suggestions still?
joshtrader said:
Hi xdas,
I just ordered my Nexus 4, finally!!, and i want to get some protection for my baby when it delivers. I am looking for a full screen protector film for front and back or even sides, and a bumper case, for a cheap and reasonable quality product. The official Nexus 4 bumper case is priced too high for a case, so i decided to look for other options. I would like to hear some suggestions on the full film screen protector and bumper case, and i would prefer to buy it from ebay or amazon or the company's official website, because i do not trust unknown sites.
The few products i found for bumper cases are:
Poetic Borderline Bumper Case - $9.95
Shenit Bumper Case - $14.95 (Not sure about this, seems unknown)
for full film screen i found:
XtremeGuard Full Body screen protector shield - $3.99 or $4.99
Skinomi TechSkin for Nexus 4 - $12.99
ZAGG invisibleSHIELD for Nexus 4 - Full Body ($20.96) or Maximum Coverage ($20.65) I do not know if the Maximum is better because it might interfere with buttons and other holes because it is not cut properly
Note: Can anyone tell me also if *wet* application is good, because i read some reviews that it damages the phone, and you have to dip it in soap, yikes, a phone in water i think its going to damage it.
*Sorry for not posting links, forum rules wouldn't allow me to because i just joined, i will add soon!
Can you guys recommend me to some other alternatives other than the one i posted and if also you can give me reviews on those i posted?
Thanks so much in advance!
Click to expand...
Click to collapse
I currently have the poetic bumper, and it's good till it splits, but the company has a really good warrant and has been shipping out replacements pretty quickly. Heard there's a new version, but waiting on this one to break first. As of screens protectors, I had an extreme guard, took it off, but prolly putting another back on. Just a helpful hint about applying wet apply screen protectors, DO NOT PLACE THE PHONE IN WATER. The protector goes in the water, then onto your phone. The phone is dry, the protector gets wet, to slide on the phone easier (giggedy). Here is a video to help you along. The wet apply protectors can go over the edges of the phone while the dry one won't cover that portion of the screen. Hope that helps.
http://www.youtube.com/watch?v=KVGa8ED4KBM&feature=youtube_gdata_player
-EP
Go with the xoskins case fit version. They are wet install but don't have orange peel. They also come with spray and lifetime replacements. Get a generic bumper on amazon. Some ship from china some ship from the US. Make sure so you dont end up waiting 2 months for a bumper.
I use skinomi carbon fiber skins on all my devices. No bumpers, cases, or anything else that makes the phone bulky or harder to carry in my front jeans pocket. Just ordered for my N4, can't wait to slap it on.
As for screen protector, I run it naked. I don't carry anything else in my left pocket besides my phone and just am generally careful to not scratch the screen.
I got a cheap xtremeguard for the back, nothing on the front because I love how slick it is and the poetic bumper.
For me it is the perfect setup except I'm on my 2nd bumper because the first one separated.
eep02b said:
I currently have the poetic bumper, and it's good till it splits, but the company has a really good warrant and has been shipping out replacements pretty quickly. Heard there's a new version, but waiting on this one to break first.
Click to expand...
Click to collapse
Do you know if the version selling on eBay is the newer version?
stretched said:
Go with the xoskins case fit version. They are wet install but don't have orange peel. They also come with spray and lifetime replacements. Get a generic bumper on amazon. Some ship from china some ship from the US. Make sure so you dont end up waiting 2 months for a bumper.
Click to expand...
Click to collapse
I'm confused about why people would use a wet install skin on the Nexus 4. Wet skins are meant for phones that don't need a bumper and give some shock absorption. The Nexus 4 needs a bumper/case because it is made from glass. If it falls with only a wet skin protecting it, it will still crack. Anyhow, the transparent sticky ones from eBay look even better and they only cost 50 cents.
turbodroid said:
I use skinomi carbon fiber skins on all my devices. No bumpers, cases, or anything else that makes the phone bulky or harder to carry in my front jeans pocket. Just ordered for my N4, can't wait to slap it on.
As for screen protector, I run it naked. I don't carry anything else in my left pocket besides my phone and just am generally careful to not scratch the screen.
Click to expand...
Click to collapse
Aren't you playing with fire? Even with skinomi, if you drop your phone once on the pavement, the glass will probably still crack.
Hi,
Just got a 8.4 Tab S and Samsung keyboard.
Please suggest a good screen protector (either plastic or tempered glass) that I can easily in Canada (either online or store).
I will also need a case that can fit the tablet/keyboard with a stylus holder.
Thanks in advance.
I have this glass screen protector. No complaints.
http://www.amazon.com/gp/product/B010BUKH1K
I am not sure about the case, I use the Samsung snap on flip cover and love it but it wouldn't accommodate your keyboard. As far as screen protectors go I have a Zagg and I love it, they have always been my favorite and if the protector ever gets damaged they replace it for you.
I'm using a tempered glass from Japan + flip plastic casing.
Dropped my tablet from knee height few weeks back and my screen didn't crack.
Previously I had other tablets without a tempered glass and the screen broke easily.
So a tempered glass is def a must-have for glass protection.
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Can't say enough good things about both of these items for the 8.4" Tab S
intelliARMOR tempered glass
Although you asked about one that also holds a keyboard, if you opt for one that is for the tablet only this is a great one. MoKo Samsung Galaxy Tab S 8.4 Case
I'd post links and did actually, but my post count is less than 10 so you'll have to do the leg work yourself on Amazon.
I went with the book cover hence no screen protector required
I bought the Beetle case myself yesterday, it has to ship all the way from the US to the UK, so it was not as cheap as yours, what tempered screen protector did you buy, though i am not the best as installing them.
John.
warriorking said:
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Click to expand...
Click to collapse
I purchased the Anoke brand from amazon..cost me 11 bucks..
No problem installing a tempered glass, it's real easy compared to a regular wet install non tempered one..
You just peel away the adhesive side and line it up carefully and lay it on the tablet, then just touch the center of the screen, it will do the rest, you then remove any excess aIr bubbles with the included cloth, no mess , no fuss...
Can the built in screen protector be removed without damage so it can be used with the case in the future?
I have an tempered screen protector, but it came with some of the adhesive around the edge damaged and i got a refund, but it looks like this case the bezel is covered so it might not be seen, so i might be able to use it.
Thanks
John.
warriorking said:
I purchased the Anoke brand from amazon..cost me 11 bucks..
No problem installing a tempered glass, it's real easy compared to a regular wet install non tempered one..
You just peel away the adhesive side and line it up carefully and lay it on the tablet, then just touch the center of the screen, it will do the rest, you then remove any excess aIr bubbles with the included cloth, no mess , no fuss...
Click to expand...
Click to collapse
Tinderbox (UK) said:
Can the built in screen protector be removed without damage so it can be used with the case in the future?
I have an tempered screen protector, but it came with some of the adhesive around the edge damaged and i got a refund, but it looks like this case the bezel is covered so it might not be seen, so i might be able to use it.
Thanks
John.
Click to expand...
Click to collapse
Yes, Just use a razor blade to loosen one end.
Its basically glued with a very light film, so it will peel off quite easily.....
But honestly when you see the ugly oily rainbow effect it has you will probably never want to put it back on...
I will see what it look like, and if it`s bad i will get an tempered glass screen protector, do you know what the weight of the beetle case, I cannot seem to find it, even on the supcase website or amazon, does it add a lot of weight? EDIT: Is is it 7oz approx 200g ???
Thanks
John.
warriorking said:
Yes, Just use a razor blade to loosen one end.
Its basically glued with a very light film, so it will peel off quite easily.....
But honestly when you see the ugly oily rainbow effect it has you will probably never want to put it back on...
Click to expand...
Click to collapse
It does add noticeable weight to the tabet but nothing that would cause any issues, for me I like the added weight, The Tablet s was so light I felt I was holding nothing and was afraid of dropping it everytime I picked it up.
Now I have something I feel comfortable caring around ..
I got my case yesterday, I cannot see any rainbow effect, did you remover the protective plastic from the inside of the screen before installing it.
Though the built in screen protector is an fingerprint magnet.
John.
warriorking said:
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Click to expand...
Click to collapse
Yes,
Glad yours is working out..
Only issue I have thus far with further use is there is no kickstand on the case, but I have a portable tablet stand arriving tomorrow which should fix that problem...
Will let you know how it works out...
Ok got my Tablet portable stand from Amazon today, very sturdy and works great, has lots of different angle settings to fit your needs.. http://www.amazon.com/gp/product/B000CKVOOY?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
It also will hold the tablet regardless of what case you use to house it..
As you can see I have the heavy duty Beetle case and it fits perfectly....
Stand opened and ready for use.
Tablet resting on the stand with front and back views.
On stand along with the Samsung Bluetooth keyboard...
If you want a stand that will fit in your bag or pocket for quick use this is the one you want.
Using a case or going naked?
So I was wondering if anyone else prefers to use their Honor 8 without a case. I usually have at least a case if not a screen protector as well, on my primary device. I really like the feel of the Honor 8 without a case so I've been using it like that. What about you: case, screen protector, both or none?
I just got my Honor 8 on Monday evening, so I haven't received the case and screen protector that I ordered yesterday. However, I found an Honor 8 TPU case at Best Buy that I picked up until the better one arrives.
I would prefer not to have to use a case, but with a glass phone I'm always leery about dropping and cracking it. With a lot of my older phones, I wasn't nearly as concerned. If you drop a plastic or metal phone, you probably won't shatter the entire thing.
I wish LifeProof would make a case for the Honor 8. Then I could at least have a fairly heavy duty case but still be able to see (most) of the beauty of the phone.
use a clear case for protection, its slippery and you dont want to drop it and smash the glass
If you can afford buying another one don't use anything.....what i did when i got mine was applying the tempered glass and case before even opening the phone
Actually, I'm using both. Found a chinese TGSP in amazon and a orzly clear case. If it weren't for those my phone probably would be shattered after the last fews falls it has had :S
I go naked indoors and cover up outdoors. I do the same with the phone.
I put mine into a leather wallet type case.
I love the phone and how it looks but I thought I was gonna break it, it looks so breakable so for me and my life I had to give it full protection.
It might not look nice during daytime hours but at least i know it's still like new inside !
John
Sent from my Honor 8 using XDA Labs
I don't like cases, makes the phone too thick. But I put on a skin, so now it is not slippery anymore.
laconic5 said:
I go naked indoors and cover up outdoors. I do the same with the phone.
Click to expand...
Click to collapse
Hahahaha :laugh: :laugh: :laugh:
Im using mine honor 8 in daily use with tempered glass on the front and in the back from Nillkin.
And, if i need use the phone in work I'm using armored case
Normally I do both but this AWESOME phone is only $300, so I don't really care to get a screen protector.
Buying a ferrari and covering it with ugly cloth.
I'm using it with full body clear film.
Guys this thing is beautiful.
Let it shine.
I have tempered glass on front and back.
Always a case.
terpi74 said:
Im using mine honor 8 in daily use with tempered glass on the front and in the back from Nillkin.
And, if i need use the phone in work I'm using armored case
Click to expand...
Click to collapse
I got a nillkin front too. If I am working at the office I left my case in the car. If I go outside often I use honor flip case, spigen or one from ipaky.
Btw how does the the tempered glass nillkin on the back look?
flyinghighaero said:
I got a nillkin front too. If I am working at the office I left my case in the car. If I go outside often I use honor flip case, spigen or one from ipaky.
Btw how does the the tempered glass nillkin on the back look?
Click to expand...
Click to collapse
Ther's no different between when the back its covered by the glass but it's more safety from the scratches because back cover is full covered by the glass
Using the official flip case here. Works great.
Matte screen protectors on both sides = much less slippery.
Transparant silicon case to make it less slippery
I use the View Cover, but just until I get curved tempered glass for front and back in the mail - I hate using a case, but with that slippery back I can't trust it not to slip of sandpaper on a level table.
I don`t use screen protector but I use the blue pc case on blue honor 8 it is very thin (It almost protects nothing but at least it covers the glass back) phone still looks shinny.
I have ordered OnePlus 6 today.. And waiting that would come tomorrow.. This time it's almost 95 percent glass so protector would be must need to keep the device mint, especially for the BACK!!
So Let me start of the thread for the OnePlus 6 Screen Protector.
I have ordered OnePlus 6 Full body screen protector from the Gadgetshieldz.
And I hope this time it's merely impossible to get the best TGP soon. Please let know your suggestions.
Finally got my Gadgetshieldz protectors and applied it. The protector is fitting well and all the holes are perfect. Important part is, its providing lot of grip to the OP6 which is very slippery without the protector. Might go for a Tempered Glass for the screen if I find a decent one but the back protector is a keeper. Take a look at the images of the protectors applied on my OP6. Can't go wrong with these for a low price.
Hunkman said:
I have ordered OnePlus 6 today.. And waiting that would come tomorrow.. This time it's almost 95 percent glass so protector would be must need to keep the device mint, especially for the BACK!!
So Let me start of the thread for the OnePlus 6 Screen Protector.
I have ordered OnePlus 6 Full body screen protector from the Gadgetshieldz.
And I hope this time it's merely impossible to get the best TGP soon. Please let know your suggestions.
Click to expand...
Click to collapse
Thanks. Ordered one as well. Mostly for the back protector since the phone is glass. Hopefully OnePlus releases an official TGP that includes a back protector.
Ordered same too !
Great worldwide free shipping. Wonder how long it takes...
I bought the original bumper carbon case but forgot to buy the combo (case + screen protector).
Now I don't know if I should buy the original oneplus screen protector (tempered glass) or buy something from a 3rd party.
Any ideas?
Hi,
I thought we cannot use bumper with tempered glass ?
vats219 said:
Hi,
I thought we cannot use bumper with tempered glass ?
Click to expand...
Click to collapse
Hmm, you may be right.
This is the one I bought:
https://www.oneplus.com/uk/oneplus-6-protective-case
And this was the bundle:
https://www.oneplus.com/uk/oneplus-6-total-protection-bundle
What is the difference between the protective case and the bumper?
I think bumper protects the screen better. But if you use a tempered glass you cannot use bumper as the covered lips of the bumper will damage the tempered glass.
vats219 said:
I think bumper protects the screen better. But if you use a tempered glass you cannot use bumper as the covered lips of the bumper will damage the tempered glass.
Click to expand...
Click to collapse
Gotcha.
I will wait to get it and see how it goes.
Anyone had any experience with those nano liquid protections (ie: https://www.spigen.com/collections/oneplus/products/screen-protector-glas-tr-nano-liquid )?
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
sn0warmy said:
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
Click to expand...
Click to collapse
That's good info, sn0warmy, appreciate the input! It's definitely good that it will buy us time for that.
sn0warmy said:
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
Click to expand...
Click to collapse
According to OnePlus support chat, the tempered glass protector will work with the bumper case. I'm not saying they are right, but I'm saying there is a chance
suprstar29 said:
According to OnePlus support chat, the tempered glass protector will work with the bumper case. I'm not saying they are right, but I'm saying there is a chance
Click to expand...
Click to collapse
With the ultimate bundle, you get the choice of bumper case and tempered glass. It wouldn't make sense to bundle them if they didn't work together, but who knows. The strange this is that the bundle that includes only a case and glass, doesn't offer a bumper case.
I have the bundled case and the sandstone. Both fit with the OnePlus tempered glass. I would guess the bumper does too having looked at it in the shop but not 100% as I didn't put it on.
Since they sell the bumper and the tempered glass together and there are no notes in the tempered glass that it does not work with the bumper case, i am really hoping that you can use the 2 together since that is what i bought. if they don't work together, i will have to send the bumper back.
emontes said:
Gotcha.
I will wait to get it and see how it goes.
Anyone had any experience with those nano liquid protections (ie: https://www.spigen.com/collections/oneplus/products/screen-protector-glas-tr-nano-liquid )?
Click to expand...
Click to collapse
I did not have experience with this particular brand but ordered from AliExpress for $3.50 each about six months ago for my Samsung Galaxy S8+. It's been six months w/o a screen protector and not a single scratch insight. I don't have the rough use of my phone but don't baby it either. Long and short of it is: This type of product MAY work and just to try it out, I would not spend $24. $4 and wait of 2 weeks should get you the same product at a much cheaper price to try. Here is the link to the product I used:
https://www.aliexpress.com/item/Uni...091.html?spm=a2g0s.9042311.0.0.42ad4c4d25n1Zf
P.S. No relation or financial interest with this company.
Gr8man001 said:
I did not have experience with this particular brand but ordered from AliExpress for $3.50 each about six months ago for my Samsung Galaxy S8+. It's been six months w/o a screen protector and not a single scratch insight. I don't have the rough use of my phone but don't baby it either. Long and short of it is: This type of product MAY work and just to try it out, I would not spend $24. $4 and wait of 2 weeks should get you the same product at a much cheaper price to try. Here is the link to the product I used:
https://www.aliexpress.com/item/Uni...091.html?spm=a2g0s.9042311.0.0.42ad4c4d25n1Zf
P.S. No relation or financial interest with this company.
Click to expand...
Click to collapse
Nice.one,man, I bought it, let's see!
Thanks for the heads up.
brangalm said:
Thanks. Ordered one as well. Mostly for the back protector since the phone is glass. Hopefully OnePlus releases an official TGP that includes a back protector.
Click to expand...
Click to collapse
One question. Are you sure the official TGP includes a back protector?. In Spanish online store don`t say anything about this.
Greetings from Spain.
When you uncheck the body-protector, you pay 9.95$ instead of 11.95$ so pretty sure it does.
Hecke92 said:
When you uncheck the body-protector, you pay 9.95$ instead of 11.95$ so pretty sure it does.
Click to expand...
Click to collapse
Are you talking about this? :
OnePlus 6 3D Tempered Glass Screen Protector Black
$19.95
x 1
This is the official TGP from OnePlus.com online shop. In the description says :
In the Box:
OnePlus 6 3D Tempered Glass Screen Protector
Don't say it has a back protector.
Greetings from Spain.
I am sorry mate, I got you wrong.
I was talking about gadgetshieldz, there a back protector is included.
Oneplus official tgp doesn't include a back protector (and @brangalm says "hopefully" so he isn't sure either), but I ordered it as well.