Hi,
I wanted to switch from MIUI to Mokee on my Mi4, because I didn't want to wait for Android L on my device any longer. I installed the newest Mokee Rom via TWRP recovery (also newest version) and after a reboot I flashed the official Mokee GApps. Of course I did a full-wipe and facory reset and everything.
>Everytime the Playstore crashes and under Account Settings, there is no possibilty to add a Google account.<
I know, you have to go and check under Mokee Center and extras. I downloaded the GApps there (which are exactly the same as before), but after reboot and flash through TWRP still the same. I tried different GApps Versions like PA Gapps (even the smallest package is too big) and DHO-GApps (could install, but no change), I tried different things like everytime cleaning the Dalvik-Cache before and after and so on, still the same.
I had a little success when I download the Play Services apk manually, but the GApps would crash afterwards. What is the %&$§ing problem?
Thanks for your help!
Thanks for your help, guys! Not.
Do you run out of space with Gapps? Try Slim Zero Gapps (or need to run partition patch).
http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
http://forum.xda-developers.com/xiaomi-mi-3/general/howto-resize-extend-partition-capacity-t3011918
These probably would have solved that, but I now installed Ivans Lollipop Version and it works like a charm. Thanks for your help anyways!
Hi together,
after flashing the open gapps I got this:
"Unfortunately, Setup Wizard has stopped"" application crashed message
I tried the full -> Error 70
only the nano could be flashed and after reboot I got the same error: "Unfortunately, Setup Wizard has stopped"" application crashed message
I also tried to wipe ... no changes ..
what can I do to get gapps running on CM13?
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
strozi78 said:
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
Click to expand...
Click to collapse
haven't found one yet ... and you?
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
solved! ... deleted google accound and remapped
Only the Setup wizard popup stops coming. Thanks for that.
There is a random popup about Google Play services which disappears on its own. I have given all permissions to the Google Play services app using the same steps as provided earlier. Still the same.
Please help.
Also in addition to this, there is a fix given by the OpenGAPPS team on GitHub as Notes for Android 6.0 (Sorry, cannot post link as this is my first post).
Can anyone help me patch this file onto my device (LG Nexus 5)?
Thanks in advance.
Maybe try different versions of gapps? I use the latest pico version and it works on the latest nightly.
I tried, micro, pico, stock.. All with same results. I was using nightly that came out on 12/02/2015.
Currently I reverted back to cm12.1 as I need to use the phone for day to day stuff. Please let me know if the latest nightly does actually fix this. And also which gapps, I will download the specified file and let you know by weekend.
Thanks for the help!
Try these gapps: http://opengapps.org
Yes I was using gapps from this site. I just need confirmation if the new cm13 nightly actually fixes the issue.
I guess it's not even with Cyanogen to fix the issue. The gapps when installed (flashed) , don't get the desired permissions to execute. It should be the a new gapps build released by opengapps. Still, I will keep searching.
PS: please look at the fix given by gapps team. I also don't know where to modify that code.
Here is how i got it to work.
1) Boot to recovery
2) Do a full wipe (Data,System,Cache,Dalvik)
3)Flash CM13
4)Do a wipe (Cache,Dalvik)
5)Flash GAPPS ( I used pico from Open Gapps)
6)Do a wipe (Cache,Dalvik)
7) Do a Factory Reset.
8) Reboot !
That should do it, Don't complain about useless wipes after trying for 2 days this finally worked !
I have my lovely G3 back
Good Luck !
I got it to work to flash it together with the ROM.
Cheers
I managed to make it work by installing CM13, in recovery mount /system and check how much space left on you system partition. After that you can choose the maximum size Gapps that fits the free space.
Wipe all excluding sdcard and USB-OTG. Install CM13 and Gapps together.
After reboot the wizard will not crash.
Other option is risky and can turn your phone into a break This is option is to resize /system to make it bigger.
I used the latest nightly CM13 for Xiaomi Mi4 and twrp-2.8.7.0-cancro
Solved
This guy will solve your issue watch this video
Search
Moto G Cm13 Gapps Fix (Setup Wizard)-TechZotic
on YouTube
sorry couldnt paste link as i am a new user
holzfelix said:
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
Click to expand...
Click to collapse
Thanks. This worked for me, although I had 2 Setup Wizard apps. The one with the CM logo had no permissions that needed assigning. The other one did. Once permissions were given, the issue went away. It was tricky to do it between the error dialogs appearing. What helped was switching to the guest account and back, then, occasionally, you had enough time to work the settings.
Had those Problems often, don't know why.
I just delete the settingwizard.apk in twrp (mount system, then system/priv-app if I remember).
Worked Several Times for me - you must do that always After flashing gapps!
My Fix....worked for me on HTC One M8
NOTE: Ensure you have a NANDROID backup BEFORE proceeding with the below, just in case something goes wrong
1. Ensure that you have all required files (CM13 Zip and Open GAPP Zip) saved to your phone (internal or SD card)
2. In my case, I used TWRP, so ensure you have the latest one
3. Boot into TWRP recovery
4. Using ‘WIPE’ option, select ‘Advance’ and choose: Data, Dalvik, Cache, System
5. Using ‘INSTALL’ option, Install CM13 via TWRP
6. DO NOT BOOT UP PHONE JUST YET
7. Perform a Cache and Dalvik wipe
8. Using ‘INSTALL’ option, Install GAPP Zip via TWRP (I used GAPP mini due to space)
9. Now you may reboot the phone.
The solved the ‘Setup not working’ issue for me and my phone is now working like a charm with CM13 and google apps! I have a HTC One M8 FYI
ThankYou So MUCH!
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
You're A Life Saver! Thanks!
please share solution for this or any working apps link..
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
paulsoncpa said:
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
Click to expand...
Click to collapse
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
billysam said:
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
Click to expand...
Click to collapse
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
paulsoncpa said:
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
Click to expand...
Click to collapse
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
billysam said:
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
Click to expand...
Click to collapse
That's what I figured. I didn't see any threads under the CM 13 of people having issues so figured it was most likely in my flash process. I did re-format and re-flashed and it is fine now, so far. I did run into the trebuchet issue one time, but was able to force close, clear trebuchet cache, and change the permissions/defaults to fix it.
Something I did with setting the default launcher triggered the error, but not sure what.
Thanks for your help!
I've installed the new build of Lineage on my note 10.1 8010 and flashed it with the arm 7.1 nano Gapps which constantly pops up with the "Setup Wizard keeps stopping" error.
I've tried using the pico version and this didn't work either.
Reviewing some fixes online say that i should grant permissions to Contact and Telephone, for the SetupWizard, but my SetupWizard isn't requesting permissions to this, it's just blank.
I have found a com.google.android.setupwizard but these have already been granted.
Another fix is to make sure you have Wifi connected, which it is.
I've cleared cache and wiped everything many times to see if it was a way i was installing Gapps, attempting to install it right after the rom was installed, installed the rom, then booted and then installed Gapps...
..tried lots of different methods but nothing seems to work.
Using TWRP.
Been at this for days now and really out of ideas.
Thanks
Hey, i've just installed Lineage OS (20.0/Android 13) on my Moto G100 following this tutorial
, but i'm not able to install the Gapps. As soon as i reboot the phone after installing them it keeps reboot (it always shows the Lineage Logo for a couple of seconds and then just reboots). I've tried it with MindtheGapps, BitGapps, LiteGapps and NikGapps, none do work... Does anyone know a solution for that problem?
I was able to install GApps fine, and I used LiteGapps, something that is doing wrong
Thanks for replying, which version of the LiteGapps did you use (Pixel/Nano/basic...)? And which of them includes all the Google Apps?
I installed the Lite version that only has the Play Store, probably the error it is giving is the fact that it has too many GApps on it and the cell phone has a full system partition, so there would be no way to fit more apps inside the system