I would like to downgrade my GS4 from Verizon from MM to KK. No matter what source for the tar file, cord, pc, drivers, I cannot get this thing to downgrade.(or install the same version just as a test) In Oden I get the same error at the same spot.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone I get
SW REV. CHECK FAIL : fused : 8 , Binary : 6 (or 7 when I tried 5.0.1)
After testing alot of different tar files (different sources and versions of android that work with the phone) I would just like some insight on what
Hello and thank you for using XDA Assist,
please create an account and ask in our Verizon S4 Q&A section. The expert's there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Related
HI all
Just wondering if any one can help me.. I update my tablet with the incorrect firmware (N8000 4.4.2) which totally bricked the tablet.
After playing around I managed to get the tablet working on N8010XXBLK9 using a differnt PIT file, but now I cant update it with any other firmware as I get the following msg..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have used different cables but still no luck.
Also my ODIN name hase changed to N8000...
Thanks in advance for all your help!
Perbags
i am getting a message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
So I booted in download mode and tried to install the stock rom on odin and it fails
What am i doing wrong?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU2BOC8_N915PSPT2BOC8_N915PVPU2BOC8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
XDA Visitor said:
i am getting a message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
So I booted in download mode and tried to install the stock rom on odin and it fails
What am i doing wrong?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU2BOC8_N915PSPT2BOC8_N915PVPU2BOC8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hello, thanks for using XDA Assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/note-edge
After creating your account, please post your question here:
http://forum.xda-developers.com/note-edge/help
Your device experts are located there and will be able to help.
Good luck!
Hello there, this is the story of a pleb trying to downgrade the firmware on his Galaxy S5 SM-G900A and failing miserably. I tried to use odin to flash the stock android 4.4.2 md5 file on SamMobile and whenever I try I get <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the downloading screen I get SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1.
I tried to use Kies with the "Firmware Upgrade and Initialisation" and I got to the point where it's installing the new software and then it says there has been an unexpected error and it gives me the option to do an emergency firmware recovery but it doesn't give me a recovery code.
Please Help
XOXO
-Dan
I'm trying to apply the correct firmware for my region UK and carrier which is EE but i can't seem to do this since it keeps failing on me when i start the process. This is the output from the logs.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just some background info as to why and what i've done previously.
The problem is i can't update the software since it keeps on saying processing failed. After looking into this it may be linked to region of the device since the baseband versionis I9505XXUGNK4 and the CSC part is not a UK code which is why i'm guessing the phone can't be updated also on the phone screen it shows the following error message at the point at which it fails secure check fail sbl1
Also i used kingoroot to root the device and i have a superuser app install as well before using Odin but surely this can't be an issue can it?
Hi,
Try posting your question here:
Galaxy S 4 Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hello everyone, I tryed reflashing stock firmware to a samsung sm-g318h with odin, and all i get is this error
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G318HXCU0APB1_G318HROM0APA1_G318HXCU0AOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> sboot2.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I have tryed with diffrent versios of odin, diffrent roms and another computer, I can't get into recovery, only in download mode, pc recognises the phone, but does not want to flash neither boot up...
From what i've read on the internet and on this forum, it might have something to do with a corrupted nand, but i have no ideea how to solve that.
Please help me with any ideas as to what might be wrong with it.
Thank you, in advance!
Hello and thank you for using XDA Assist,
please ask in this section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist