My micromax canvas a111 got stuck on boot logo - Micromax Canvas Doodle A111, Doodle 2 A240

Sir my micromax canvas A111 stuck at boot logo.
I am explaing the procuder what i do for rooting my phone.
First i turn on the usb debuging then i downloaded farma root apk and press ok to root the phone, phone restarted and root was successful, after that i used an apk to install the twrp recovery that was also sucessful, then i started to flash the custom so i put the custom rom .rar to the phone storage and reboot to twrp recovery there first i tap to wipe data then wipe cachee and delvik cachee after that i tap on factory reset till here every thing was fine after that i show that there is an option to tick the system so i check the box and slide to wipe at hat time suddenly it says that your devise is not rooted and stuck at that place after 15 min i removed the battery to restart the phone at that time it only showing the the canvas logo and got stuck i wait for 30 min nothing changed so i try to open the twrp recover but can't able to enter in recovery mode it only show the canvas logo and stuck please sugest what to do ,
Does i wipe the whole system including the stock rom, emai number, Bluetooth adress and wifi mac adress?
Does the servise center can reinstall the rom again . What would be the charge?
Thanks in advance

Related

Ultimate unbricking guide for micromax a35

HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!

[Q] Micromax A110Q Restarts continuously

HI, I am using Micromax A110Q. From yesterday Onwards it self it restarts continuously so i removed the battery. When ever i insert the battery it boots up automatically after shown the canvas logo again it's restarting. I flashed through sp flash tool wit original firmware. I tried Recovery option wipe data wipe cache, and also i tried cmw but it restarts after shown canvas logo. factory mode working perfectly. I took a full test. I flashed the whole disk again it's restarting. Please kindly help me brothers. Please :crying::crying::crying:

[Completed] [Q] my g2 died after i install an official rom for it ....please help?

my device wont turn on after i installed the 4.4.2 official kitkat which is flashable zip with twrp recevory i had forgotten to wipe system , data and chache . after i finished it wouldn't boot to system it just shows the lg logo and repeat it continuously without shows the system , unfortunately , the rom is official , so it delete the recovery , now i couldn't enter the recovery and i have to wait the buttery to be embty by itself in order to turn off . plse hlp
If all you're trying to do is power it off and enter recovery, you can long press the power button for about 10 seconds and it will power off.
This thread may be if interest
http://forum.xda-developers.com/showthread.php?p=48361867#post48361867
Good luck
Thread closed

[HELP] Device bricked

I recently rooted my Micromax Canvas 2 A110 using rootgenius.
Then I installed TWRP recovery
Finally, I went to Settings>backup and reset>factory data reset
Phone rebooted, into twrp, a message came saying:
" updatind partition details...
formatting cache using mke2fs
done.
formatting data using mk2fs
done."
phone reboots again, shows canvas logo, then teamwin lolo, then same message comes again, this happens again and again. :crying:
Then I removed the battery and thought of flashing stock ROM via sp flash tool, but the process does not start. :crying: (Maybe phone is not being detected)
So, I installed VCOM drivers and device drivers, still not detected.
I can't get to recovery, whenever i put it on charging, connect it to usb, power on, same message comes up :crying:
What should I do now? Experts, please help me... :crying: :crying: :crying:
Thanks
OmG This Is a big error i suggest u go to google and search a another ROM and put it on sd abd thn go to recovery and try to instal or with pc

MIcromax A109

HEllo !
I USe a Micromax A109
today i tried to repartition my internal SD using the below video
https://www.youtube.com/watch?v=V9aFPNcwajw
At 1:08 he touch reboot into recovery !
In my case that didnt worked!
I tried to shut down my phone And Then reboot into recovery to factory reset it!n wipe data n cache! USing Vol+ ANd power.
Now when i tired to boot it switches on the phone ! the micromax starting logo comes (Video is Uploaded linked here https://youtu.be/T-PjHmA_NRY . and the it restart continusly!
i Had cwm recovery.
As you can see inthe video it restart continusly!
Plz HElp mi
Does that had deleted my partition txt tht my phone is not able too boot or detct Internal SD?
Even when i plug the charger the phone swtich on by its own!n rstart again n again

Categories

Resources