Hello, I was following this tutorial made by @rlmiller on how to root the N920P:
http://forum.xda-developers.com/sprint-galaxy-note5/general/how-to-root-instructions-t3187895
it was my first time rooting So I was following closely all the steps. I downloaded this versión of the Freeza's Kernel:
https://www.androidfilehost.com/?fid=24052804347848527
And I clicked start, then I saw PASS in odin, and the screen of the phone was in the Black screen with the Samsung Galaxy note 5 message, and on the top it said in red letter "Kernel is no seandroid enforcing" .
The phone is still like that, I don't know how to fix that, can someone help me find a solution?
Thanks in advance!
That is an old thread and obviously doesn't work.
Try one of the latest kernels out of the Original Development thread, they are designed for MM.
For just root:
[How-to] Root your Device - all versions
Related
Ok,so I wanted to root my phone and I totally screwed it up, it gives me an error code "kernel is not seandroid enforcing" and the it says "set warranty bit:kernel" I there any way I can restore it back to what it was. It doesnt matter if it goes back to factory settings, I just want my phone back. Its a T-Mobile Galaxy S4 and was on 4.4.4. Please, I'm a noob at all this so a easy step by step guide would really help. I have Odin and KIES is that helps. Thanks.
Hi, thank you for using XDA Assist. You'll probably have to return it to stock using Odin. See your device's specific forum here, http://forum.xda-developers.com/galaxy-s4-tmobile. They are the experts on your device. Particularly see this, http://forum.xda-developers.com/showthread.php?t=2419828
Thread closed.
I had rooted my phone relatively easy with the stock image, however, before I was going to do anything further, I wanted to make sure I had a backup. I looked into my choices being TWRP or CWM. I went with TWRP and had followed all the steps. I followed this seemingly easy tutorial (technobuzz.net/easiest-way-to-install-twrp-recovery-on-galaxy-s6-or-s6-edge/), installed flashify on my phone, flashed the TWRP .img for "All Other Models" and my phone reset. When it did, it would not boot up past this screen.
imgur.com/C5dzITJ.jpg
Then I thought "Oh, well it must not be the right one because it's not working, I better flash one that's meant for it" and flashed this this one (galaxys6root.highonandroid.com/cwmtwrp-recovery/) (the tar file) via Odin v3.1 instead of through my phone like last time (because it was inoperable). I just wanted to make a backup before anything bad happened. Now it's stuck on this screen without any of the button being operable. I even connected an OTG cable and it worked for like 5 seconds and the mouse would disappear.
imgur.com/OHpAbLW.jpg
So I thought "Alright, well let's clean the slate" and I proceeded to download the stock with the most updated image(sammobile.com/firmwares/database/SM-G920R4/) (just noticed I had downloaded the one at the top that has "Kies" listed next to it, I will download the other one and hopefully it become flashable) and proceeded to flash it via Odin v3.1 and I would get this far
imgur.com/Pulkv3O.png
On my phone it says "SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2" Any help would be greatly appreciated, thanks!
UPDATE: Flashed TWRP v2.8.6 followed by v2.8.7.1 and finally v2.8.7.0 (The one that supposed to be for Sprint only) and it worked with my US Cellular device. Touch is working and I'm currently backing it up.
UPDATE #2: WE'RE GOOD. TWRP 2.8.7.0 IS THE ONLY ONE THAT WORKS FOR US CELLULARS SAMSUNG S6 (SM-G920R4) HOPE THIS HELPS SOMEONE ELSE!
jringo13 said:
I had rooted my phone relatively easy with the stock image, however, before I was going to do anything further, I wanted to make sure I had a backup. I looked into my choices being TWRP or CWM. I went with TWRP and had followed all the steps. I followed this seemingly easy tutorial (technobuzz.net/easiest-way-to-install-twrp-recovery-on-galaxy-s6-or-s6-edge/), installed flashify on my phone, flashed the TWRP .img for "All Other Models" and my phone reset. When it did, it would not boot up past this screen.
imgur.com/C5dzITJ.jpg
Then I thought "Oh, well it must not be the right one because it's not working, I better flash one that's meant for it" and flashed this this one (galaxys6root.highonandroid.com/cwmtwrp-recovery/) (the tar file) via Odin v3.1 instead of through my phone like last time (because it was inoperable). I just wanted to make a backup before anything bad happened. Now it's stuck on this screen without any of the button being operable. I even connected an OTG cable and it worked for like 5 seconds and the mouse would disappear.
imgur.com/OHpAbLW.jpg
So I thought "Alright, well let's clean the slate" and I proceeded to download the stock with the most updated image(sammobile.com/firmwares/database/SM-G920R4/) (just noticed I had downloaded the one at the top that has "Kies" listed next to it, I will download the other one and hopefully it become flashable) and proceeded to flash it via Odin v3.1 and I would get this far
imgur.com/Pulkv3O.png
On my phone it says "SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2" Any help would be greatly appreciated, thanks!
UPDATE: Flashed TWRP v2.8.6 followed by v2.8.7.1 and finally v2.8.7.0 (The one that supposed to be for Sprint only) and it worked with my US Cellular device. Touch is working and I'm currently backing it up.
UPDATE #2: WE'RE GOOD. TWRP 2.8.7.0 IS THE ONLY ONE THAT WORKS FOR US CELLULARS SAMSUNG S6 (SM-G920R4) HOPE THIS HELPS SOMEONE ELSE!
Click to expand...
Click to collapse
I have the same problem as u my phone also says "SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2", I installed twrp 2.8.7.0 and Now I need custom rom. Could u please post the link where u got a custom rom from? Please please please..save my phone. I am student and I can't afford to buy a new one.
I'm a nub at this so forgive me for asking the stupid questions. I just did all the steps to root the phone and install a custom ROM. When my phone boots, it has the red text in the top "RECOVERY IS NOT SEANDROID ENFORCING". But the main problem is the boot gets stuck on the "SAMSUNG" logo just pulsing brighter and dimmer. I've searched for several hours and can't find any posts that talk about this recently (in the past few years). At this point the phone is unusable. Please help or link me to another thread that I may have missed.
Thank you.
Use Odin to flash the stock rom(tar file). http://forum.xda-developers.com/showthread.php?t=3435149
@DapperDan1337
sinisin said:
Use Odin to flash the stock rom(tar file). http://forum.xda-developers.com/showthread.php?t=3435149
@DapperDan1337
Click to expand...
Click to collapse
I figured it out by realizing the ROMs I was trying to use don't work on the N920P. However, I want to thank you for showing me where I can find the stock ROM because I was having a difficult time finding that! So far so good on this ROM, ended up going with the MoAR v4.2 for now.
Thanks again!
I followed a guide step by step I found on this site to root my Samsung Galaxy S5 Neo SM-G903W. My phone is currently stuck with a 'RECOVERY IS NOT SEANDROID ENFORCING' message. I've no idea where to find the proper root file (the one I chose, to the best of my knowledge, is the one I needed). I can't boot into recovery mode. I don't know what to do, I'm desperate. Can someone please help me fix my phone to be either rooted or just back to normal?
Loans87 said:
I followed a guide step by step I found on this site to root my Samsung Galaxy S5 Neo SM-G903W. My phone is currently stuck with a 'RECOVERY IS NOT SEANDROID ENFORCING' message. I've no idea where to find the proper root file (the one I chose, to the best of my knowledge, is the one I needed). I can't boot into recovery mode. I don't know what to do, I'm desperate. Can someone please help me fix my phone to be either rooted or just back to normal?
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
we actually don't do technical support, we're here to guide you to the most suitable board on xda, unfortunately the phone you're using has no specific device Forum, make sure you give proper information, lots of important information is missing, like what guide (link?), what root method (PC /Odin?), what root file..
https://forum.xda-developers.com/general/general/guide-how-to-question-t3464199
Correct approach is normally to flash a custom recovery with Odin and then flash supersu zip out of your (new) custom recovery or use CF AutoRoot which automates the process, i wouldn't suggest any kingroot, framaroot, towelroot, etc. Apps.. Unfortunately a device specific forum isn't available..
Check post 3 from this thread if you are on Android Marshmallow
https://forum.xda-developers.com/galaxy-s5/general/how-to-t3298654
For lollipop
https://forum.xda-developers.com/galaxy-s5/general/galaxy-s5-neo-sm-g903f-rooted-chainfire-t3280067 (users reported that the g903f file works for g903w too)
Read carefully and use search function of this linked threads..
For returning to stock do a Google search for "return to stock g903w" or use Samsung Smart Switch on your PC.
Further questions please here:
https://forum.xda-developers.com/showthread.php?t=2257421&page=3783
Good luck
Hi every one, I am building my own kernel for galaxy s6 (nougat) with source code downloaded form opensource.samsung.com
Everything was fine until I flash my boot.img via odin.
After flashing, the phone reboot and this error appeared "Kernel is not seandroid enforcing"
I've done a lot of searching on google but all of them are just about to re-flash the stock kernel to fix this.
The thing I need to know is why did this error happend to my kernel and how to fix this error (by changing the code or anything else, not to flash the stock kernel).
If anyone experienced this case, please help me.
Thanks for reading my question. Your help will be very highly appreciated.
Thank you !
nguyen_vh said:
Hi every one, I am building my own kernel for galaxy s6 (nougat) with source code downloaded form opensource.samsung.com
Everything was fine until I flash my boot.img via odin.
After flashing, the phone reboot and this error appeared "Kernel is not seandroid enforcing"
I've done a lot of searching on google but all of them are just about to re-flash the stock kernel to fix this.
The thing I need to know is why did this error happend to my kernel and how to fix this error (by changing the code or anything else, not to flash the stock kernel).
If anyone experienced this case, please help me.
Thanks for reading my question. Your help will be very highly appreciated.
Thank you !
Click to expand...
Click to collapse
This is a common message on custom kernel, I have a s6 with custom mm rom and custom mm kernel, and I have that message come up, but my phone still boots up fine. Just a note you need to post in correct forum to get the right help, if you look in the general section there is actually a thread by a dev on how to create custom kernels, it's by the user thesickness, posting in there will get you some help.
It's just a warning, not an error.
sofir786 said:
This is a common message on custom kernel, I have a s6 with custom mm rom and custom mm kernel, and I have that message come up, but my phone still boots up fine. Just a note you need to post in correct forum to get the right help, if you look in the general section there is actually a thread by a dev on how to create custom kernels, it's by the user thesickness, posting in there will get you some help.
Click to expand...
Click to collapse
Thank you for moving my thread to the right box. In my case, the warning seandroid forcing appeared and also the phone could not boot. (nougat). I will read your recommended threads.