(c) by m0narx
Moscow,Russia
Small console extension for rooted ROMs:
What you get:
- bash
- samba - complete CIFS server, discover you Desire as windows share from the box
- sshd - SSH server
- mc - Midnight Commander
- htop - process manager
- tree - directory tree
- screen
- cpulimit
- zip
- colored bash prompt /sdcard/data/root/.bashrc
and more (iftop, opkg, pppd)
!!!UPDATE 09/06/10!!!
D/L smallupdate.zip below -before setup you should have latest console.zip already installed
!add - nano editor
!fix - usbnet minor fixes
!!!UPDATE 08/06/10!!!
!fix - bash grep incorrect option bug fixed
!add - SCP enabled, still no SFTP yet...
!add - root, var and tmp are moved to EXT partition to mount during boot time(works only with app2sd)
!add - you may put your personal init scripts to /system/sd/init.d
they will be launched just the same manner as from /system/etc/init.d
!add - to autostart samba and sshd - just run "samba auto" or "sshd auto"
to turn autorun off just run "samba auto" or "sshd auto" again
!add - usbnet command (it's not necessary to connect in internet sharing mode any more), run in console:
"usbnet on" - turn on with IP: 192.168.100.1
"usbnet off" - self describing
"usbnet auto" - turn on IP and run samba & sshd
How to:
1. D/l console.zip ( 10.19 MB ) below
!!!UPDATE!!! 08/06/10
http://files.mail.ru/X44YRN
http://rapidshare.com/files/396639709/console_new.zip.html
MD5: 27636042F84D55A813C14AD1063E88B7
2. Reboot your phone in FASTBOOT connected by USB to PC
3. launch update-eng.cmd or update-rus.cmd
4. Phone will reboot in recovery - wait 'till windows will recognize it and then press any button.
5. Wait for the update to come and after that it'll reboot in normal mode
6. You're good to go
Can some one develop an APP or widget to control those daemons with current status?!
after reboot to start SSH server:
1. launch terminal from your phone (ConnectBot или BetterTerminal)
or ADB shell from PC
2. type
su
bash
sshd start
Connect phone to PC in Shared Internet mode
or
get a IP address by WIFI from your LAN
launch Putty (included in archive)
in HOST type in your IP
click open
on "Login as:" prompt enter root, and "root's password" is also root
type bash and ENTER
now you have complete console with MC and even mouse working
you may also start smbd daemon by
samba start
after that you may access you Desire by entering it's shared folders:
\\192.168.100.254(your Desire's IP)
shares can be changed in /data/etc/samba/smb.conf
normal colored ADB FIX for WINDOWS:
1. copy *.* from winupdate folder to your C:\Windows\system32\
2. open CMD and launch
ansicon -i
3. now you have colored ADB
Sounds pretty interesting
This works brilliantly - thanks. Can you confirm whether I need to run the commands each time the phone reboots. It would be nice if we could get it to start samba automatically on reboot if not. Great work, thanks.
Can you confirm whether I need to run the commands each time the phone reboots.
Click to expand...
Click to collapse
Restart your phone and find out.
If it doesn't there's a free app on the marker called 'autostarts(root)' that does exactly what is says on the tin.
manks said:
This works brilliantly - thanks. Can you confirm whether I need to run the commands each time the phone reboots. It would be nice if we could get it to start samba automatically on reboot if not. Great work, thanks.
Click to expand...
Click to collapse
for now it isnt! i wonder if we could use this autostarts app mercianary mentioned! i'll try it later today.
also i wonder if additional system services will eat more juice?!
Also other suggestions are appreciated...
do your update.cmd in fastboot usb in my win7 notebook,it tell me device not found。could you provide a zip file that I could flash in the recovery?
Same Happened to me. If You put your phone in recovery first then run it it should work.
Awesome... thanks!!! Will try it out.
Hope you can update the scripts and apply everything automatically on each boot.. will be awesome
EDIT:
Tested and everything works... Samba is OK, I can copy files... but I only get speeds like 500kb/s over wireless... should be more!
Also I can't delete files... but permissions seems fine?
Conf:
[SDCARD]
comment = Internal micro secure digital card
path = /sdcard
browseable = yes
available = yes
public = yes
writable = yes
read only = no
create mask = 0777
directory mask = 0777
create mode = 0777
guest ok = yes
guest only = yes
2ND EDIT:
Tested ssh, works fine, but how can we enable SCP/SFTP?
d3sm0nd said:
Tested and everything works... Samba is OK, I can copy files... but I only get speeds like 500kb/s over wireless... should be more!
Click to expand...
Click to collapse
How are the load averages and IO stats while the transfer is in progress?
Just tested and it's really great but it's really really slow for me when I connect via ssh or use samba.
Anyone having the same issue?
emontes said:
Just tested and it's really great but it's really really slow for me when I connect via ssh or use samba.
Anyone having the same issue?
Click to expand...
Click to collapse
yes it is slow but it works!
I cant figure how to make samba and ssh start at boot.
I downloaded autostart from market and it told me to make an executable file named autostart.sh at /data/opt/
I created file autostart.txt and put some commands in there and renamed it to autostart.sh (changed extension, not just changed name) and chmod-ed it in ssh putty (bash mc) and so on.
but it still doesnt work...
maybe kernel needs to be tweaked??
Re: extended Desire console with bash,sshd,samba,mc and more...
Do you guys use apps2sd? I think it might be slow because of it...
------------------------------------
Sent via the XDA Tapatalk App
Actually, this doesn't work at all for me, maybe because I'm using Defrost that doesn't really work with any networking app I know (Swift, quicksshd for instance)
Can't access samba / can't even start ssh
Above SCP / SFTP, I still did not work (((In the nearest future to get to work NMBD.
If you want to run SSHD automatically on boot, you must create a file "98sshd" in the folder /system/etc/init.d with the following content:
Code:
#!/system/bin/sh
/data/xbin/sshd start
If you want to run SMBD automatically on boot, you must create a file "97samba" in the folder /system/etc/init.d with the following contents:
Code:
#!/system/bin/sh
/Data/xbin/samba start
P.S. download these files to the phone can only help RECOVERY console, using "adb push"
Don't forget chmod +x on /system/etc/init.d/97samba and /system/etc/init.d/98sshd
Sorry for my english
m0narx said:
Sorry for my english
Click to expand...
Click to collapse
Wow! the developer himself finally appeared!
We'll work together to fix stuff, he'll make changes - i'll translate 'em and collect suggestions - so bad english is not a prob. desire - that's what counts! ) (i sense play on words here! )
StrongOneX said:
yes it is slow but it works!
Click to expand...
Click to collapse
Didn't say it doesn't work did I?
M0narx,
Great one, mate. Really useful one.
Keep up the good work
m0narx said:
P.S. download these files to the phone can only help RECOVERY console, using "adb push"
Don't forget chmod +x on /system/etc/init.d/97samba and /system/etc/init.d/98sshd
Click to expand...
Click to collapse
Hey M0narx,
Tried to do an auto restart but it didn't work.
Went in recovery, pushed the files to init.d, chmod`ed 777 but no joy.
Even trying with autostart from Market Place but don't know why, it doesn't autostart for me
Any hint?
Cheers.
i'm not sure whether it works or not...
chmoded to 777, samba sshd mods are 777 also.
may be it's forbidden to run from /data/xbin on boot?
i think samba does not start at boot cause there are no IP addresses during boot time.
but still sshd is running due to ps:
Code:
ps w | grep ssh
128 root 528 S /system/xbin/dropbear -A root -N root -C root -U 0 -G 0 -a -P /sdcard/data/var/run/sshd.pid -b /data/etc/
i'm not sure what does dropbear process mean either.
and also there are .pid files in /sdcard/data/var/run/ for sshd and samba with nonexistent PIDs
Code:
# sshd start
sshd start
Starting SSH server... /system/xbin/dropbear is already running
also netstat:
Code:
# netstat -na
netstat -na
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:16650 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN
tcp 0 0 :::7890 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
and ifconfig
Code:
# ifconfig
ifconfig
eth0 Link encap:Ethernet HWaddr 00:23:76:D8:94:52
inet6 addr: fe80::223:76ff:fed8:9452/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:87 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5046 (4.9 KiB) TX bytes:492 (492.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1832 (1.7 KiB) TX bytes:1832 (1.7 KiB)
EDIT:
i found out that grep in not working in bash any more complaining about unrecognized option (it's for colored grep output)
Code:
[04:23:28 /data/local]# ps w | grep sshd
/system/xbin/grep: unrecognized option `--color=auto'
BusyBox v1.16.0 (2010-01-29 22:31:34 CET) multi-call binary.
Usage: grep [-HhrilLnqvsoeFEABC] PATTERN [FILE]...
Search for PATTERN in each FILE or standard input
Options:
-H Prefix output lines with filename where match was found
-h Suppress the prefixing filename on output
-r Recurse
-i Ignore case distinctions
-l List names of files that match
-L List names of files that don't match
-n Print line number with output lines
-q Quiet. Return 0 if PATTERN is found, 1 otherwise
-v Select non-matching lines
-s Suppress file open/read error messages
-c Only print count of matching lines
-o Show only the part of a line that matches PATTERN
-m N Match up to N times per file
-F PATTERN is a set of newline-separated strings
-E PATTERN is an extended regular expression
-e PTRN Pattern to match
-f FILE Read pattern from file
-A N Print N lines of trailing context
-B N Print N lines of leading context
-C N Print N lines of output context
Can I use pubkey auth with this sshd?
I've searched the Forums but couldn't find anything interesting which could solve my problem. I've installed Ubuntu on my Device and now I'd like to get my WiFi working. I have made the wpa_supplicant.conf file and pasted it in /etc/wpa_supplicant.
Now when I run
sudo wpa_supplicant -i eth0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf
It says:
Could not read interface eth0 flags: No such device.
Also, when I try to connect to an open network, typing:
sudo ifconfig eth0 down
The result is the same.
So what does
"Could not read interface eth0 flags: No such device."
mean and how can I get into the internet?
Thank You, I hope You can help me
Mr.Ox said:
I've searched the Forums but couldn't find anything interesting which could solve my problem. I've installed Ubuntu on my Device and now I'd like to get my WiFi working. I have made the wpa_supplicant.conf file and pasted it in /etc/wpa_supplicant.
Now when I run
sudo wpa_supplicant -i eth0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf
It says:
Could not read interface eth0 flags: No such device.
Also, when I try to connect to an open network, typing:
sudo ifconfig eth0 down
The result is the same.
So what does
"Could not read interface eth0 flags: No such device."
mean and how can I get into the internet?
Thank You, I hope You can help me
Click to expand...
Click to collapse
maybe it's not 'eth0'.
type:
sudo ifconfig -a
to see all interfaces.
fserve said:
maybe it's not 'eth0'.
type:
sudo ifconfig -a
to see all interfaces.
Click to expand...
Click to collapse
Ok, I'm going to give it a try, thank You!
Now is the problem, that I have to open the WICD Manager, but I haven't got it installed... How do i get it now? Without internet?
Finally found a way to get this usb 3g modem to work with android x86. Looks like there are significant differences in android kitkat, the other tutorials didn't work for me. Here's what i did in case somebody else finds it useful:
Model: Huawei E1752 HSPA USB Stick
Android x86 4.4.2 on Acer Netbook
Get modem to work under Ubuntu first so you have chat scripts that are known to work with your modem/provider. (If having trouble finding the right AT commands to initialize your modem you can record them under windows. Try free serial port monitor)
Install PPP Widget. It doesn't work, but that gives us usb_modeswitch and pppd to play with.
Install busybox if you don't have it already. Your device should be rooted.
I disabled modem's cdrom mode so that i wouldn't have to modeswitch it with PPP Widget every time (did it from linux)
http://ma.juii.net/blog/disable-usb-mode-switching
Tweak and install pppd/chat scripts for your provider:
/sdcard/pppwidget/ppp/free-chat
Chat script to initiate connection. Change AT commands and dial number (*99#) if yours differ.
Code:
ABORT BUSY
ABORT 'NO CARRIER'
ABORT 'NO ANSWER'
ABORT DELAYED
REPORT CONNECT
TIMEOUT 2
"" AT
OK-AT-OK AT&FE0V1X1&D2&C1S0=0
OK-AT-OK AT
OK-AT-OK ATS0=0
OK-AT-OK AT
OK-AT-OK AT&FE0V1X1&D2&C1S0=0
OK-AT-OK AT
OK ATDT*99#
TIMEOUT 30
CONNECT ''
SAY '\rReport from chat:\r'
/sdcard/pppwidget/ppp/peers/free
pppd config file
Code:
#/etc/ppp/peers/free
# Usage: root>pppd call free
ttyUSB0
3600000
crtscts
connect '/data/data/de.draisberghof.pppwidget/app_bin/chat -v -f /sdcard/pppwidget/ppp/free-chat'
noauth
defaultroute
usehostname
user fooooooo
noipdefault
usepeerdns
idle 0
/sdcard/3gmodem/connect
script to start connection
Code:
#!/system/bin/sh
pppd call free
# use own DNS (OpenDNS)
ndc resolver setifdns ppp0 208.67.222.222 208.67.222.220
ndc resolver setdefaultif ppp0
To connect, open a terminal and type:
Code:
$ su
# cd /sdcard/3gmodem
# ./connect
Now you're connected. browser should work now.
Connection is there but android doesn't know about it, so apps like play store which check connectivity will think you're offline. Install Fake Wifi Connection to deal with those.
Done !
how to get chat script for other modem
Hello, Can I use your chat script with Huawei E3531, and replace only the AT commands?
Do I need busybox?
I have no knowledge of commands, just very basic commands on android terminal.
I am having a really hard time to connect to internet, mainly because Broadcom BCM43142 wifi is not compatible with android 9.0-r2, and older versions.
Thank you
Hello ,
I have 2 rooted Android phones , I downloaded Droidsshd on both running on port 22 with password , I want to allow passwordless ssh between the 2 phones
I generated the key using the following cmd:
Code:
/data/data/br.com.bott.droidsshd/files/bin/dropbearkey -t rsa -f /.ssh/id_rsa.pub
and copied the key to the other device
Code:
cat .ssh/id_rsa.pub | ssh -p port ip "cat - > /mnt/sdcard/.key"
and Added it to the other device authorized_keys
Code:
cat .ssh/id_rsa.pub>>.ssh/authorized_keys
the I uploaded the key on the Droidsshd APP but still asks for password .. do you have any suggestions on how to setup a passwordless ssh between 2 Android phones
For this guide, we'll be using stunnel 5.41 built for android
Manual steps (Overview):
1. Download and extract stunnel.
2. Copy the stunnel binary to a location that allows setting the +x flag. (/data/local/tmp/, /su/ etc...)
3. Chmod stunnel to be executable.
4. Create your config file.
5. Optional, run a stunnel instance at home, and tunnel into home.
6. Create your psk.
7. Run Stunnel
8. Optional: Forward ADB ports
1.
Download the stunnel 5.41 from here: ftp://ftp.stunnel.org/stunnel/archive/5.x/stunnel-5.41-android.zip
Extract the zip file, and in a single folder you will find the stunnel binary.
2.
We will assume you don't have root, so for this guide I will have you place stunnel in /data/local/tmp/ but feel free to replace that with locations in /su/bin/ or /system/bin/ to suit your fancy.
Code:
adb push stunnel /data/local/tmp/
3.
Set permissions:
Code:
adb shell chmod 755 /data/local/tmp/stunnel
4.
For this setup, we will be using PSK security. This is not the best security method, but since it will only be running on your phone it should be fine.
The config file we will be creating is this:
Code:
[socks server]
protocol = socks
accept = :::20102
PSKsecrets = psk.txt
[socks client]
client = yes
accept = :::4040
connect = localhost:20102
PSKsecrets = psk.txt
We'll put this in /data/local/tmp/conf. To create this file we will run:
Code:
adb shell "echo '[socks server]\nprotocol = socks\naccept = :::20102\nPSKsecrets = psk.txt\n\n[socks client]\nclient = yes\naccept = :::4080\nconnect = localhost:20102\nPSKsecrets = psk.txt' > /data/local/tmp/conf"
5.
Notice that there is a section for both a client and server. you can take the server portion, and move it to another computer.
If you do this, your client config file will look something like:
Code:
[socks client]
client = yes
accept = :::4040
connect = your.servername.here:20102
PSKsecrets = psk.txt
You can read more about doing this here: https://www.stunnel.org/socksvpn.html
replace "your.servername.here" with the IP or hostname of your home computer, vps, or wherever stunnel will run.
6.
You will need to create a username and password to secure your socks tunnel. In this example I will be using a username of "secret" and a password of "codes are the best thing ever". Note: your password must be more than 32 characters long. We'll create this file as psk.txt (you may have noticed this earlier in the config.) It must be formatted as: "usernameassword"
The file should look something like:
Code:
secret:codes are the best thing ever
So, let's go ahead and create the file:
Code:
adb shell "echo 'secret:codes are the best thing ever' > /data/local/tmp/psk.txt"
This file should be on both the server and the client. (The default in this guide is to have both the server and client running on your phone.)
7.
Now, with all files in place, you can start stunnel by running:
Code:
adb shell "cd /data/local/tmp ; ./stunnel conf"
This will now run in the background waiting for connections.
You can now configure android applications to use this connection as a socks proxy on localhost:4080, but that is not terribly useful unless you have a server somewhere else running the socks server portion.
8.
You can forward ports to a computer via adb:
Code:
adb forward tcp:4080 tcp:4080
Now, this is where it gets more useful. You can configure your computer to use your phone as a socks proxy simply by configuring the proxy settings on your favorite browser, application or whatever you like to use: localhost:4080
Handy one-liners.
Run the following to download stunnel to your phone, create a config file, dump a default PSK in place, and forward port 4080 to your local machine for tethering joy!
Code:
adb shell "if [ ! -f /data/local/tmp/stunnel ]; then curl 'http://cheatersedge.org/android/stunnel' > /data/local/tmp/stunnel ; chmod 755 /data/local/tmp/stunnel ; fi ; echo '[socks server]\nprotocol = socks\naccept = :::20102\nPSKsecrets = psk.txt\n\n[socks client]\nclient = yes\naccept = :::4080\nconnect = localhost:20102\nPSKsecrets = psk.txt' > /data/local/tmp/conf ; echo 'secret:codes are the best thing ever' > /data/local/tmp/psk.txt ; cd /data/local/tmp ; ./stunnel conf" && adb forward tcp:4080 tcp:4080
Stop stunnel from running on your phone:
Code:
adb shell "kill -9 `ps -A | grep stunnel | sed 's/[a-zA-Z ]* \([0-9]*\) .*$/\1/'`"
Stunnel on Android 7.x not working?
Hello,
I have trouble with stunnel on Android 7.x..
I'm trying to connect to OpenVPN server through SSL tunneling with stunnel.
On phone I'm using stunnel installed in Termux and OpenVPN. Everything is correctly configured, Im using the same config on other devices in same network and it works perfectly.
I tried it with different devices with Android 7.x and it is not working at all
Immediately after succesful connection I am receiving:
Code:
TLS fd: Software caused connection abort (103)
TLS socket closed (SSL_read)
And it is still reconnecting again and again with the same error.
I also tried it with stunnel downloaded directly from stunnel.org site..
Anyone with new Android who have working stunnel? Where can be the problem?
Example stunnel.log is in attachment.
Thank you very much
Would that work with the no-root firewall NetGuard that supports only chaining via SOCKS5?