Hello , while trying to root my device i bricked it Smiley Sad
it boots till the first image (lenovo powered by android) then shuts down with a very long vibration.
if i plug the phone to the pc it connects with "Qualcomm HS-USB Diagnostics 9006" showing in the file explorer the internal memory of the phone (32gb) in many partitions .
Miflash is unable to flash a new rom cause of error showing that it cant unmount a drive.
Qfil shows the safari error.
The only thing that is working is a "lenovo-recovery" with the options :
reboot
install update package
wipe user data
poweroff
i tried to install an update package but while it reaches 100%
it shows that it failed before finishing .
Any ideas?
Thank you
Related
Hey folks!
My Nexus 5 suddenly stopped launching. When I connected it to PC, under Device Manager it was listed as QHSUSB_BULK. After installing proper drivers it changed to Qualcomm HS-USB QDLoader 9008 Serial Port (COM11). Then I launched BoardDiag v2.99a and tried to restore device. AP test passed, but EMMC test failed with message 'failed to open partition from EMMC'. When I tried to check it again, I receved a message 'device not found in dload trying flash programmer'. Then I tried to force device to reconnect by holding vol+, vol- and power buttons. Again, AP test passed, but EMMC failed.
Is there any hope for my Nexus, or is this 100% bricked?
Thanks in advance!
I have this o+ 8.91 device and i have to reflash everything on it due system problems (viruses, system ui has stopped, etc idontknow) and i used sp flash tool. Now i installed the driver and i selected format all and download. So it detected my device and started formatting. But when the download process is about to begin my phone was suddenly disconnected. Now phone is blank, doesnt turn on, and cannot be detected by my pc.. pls help :crying:
Hey,
I got a Tcl m3g wich i root and flash to CM12. After a mounth my phone wasn't able to boot, it was stuck in a bootloop. So i flashed it with QFIL and it was still stuck in a bootloop with primo V2 firmware so i flashed it a second time with an other firmware. My phone wasn't stuck anymore in a bootloop but still won't boot.When i connected it to my computer it apears like an hard drive.But the next day when i conneced it to my computer it apears "unknow device" i tried t download qualcom driver to use fastboot but it seems to not work my device is still "unknow device" in device manager (i can't access any mode and my screen is black + my batterry is dead). I hope one of you can hep me:fingers-crossed:
Sorry for my bad english
Update:The computer doesn't detect my phone :'(, the unknow device was my mice...
Hi
I have a lava iris 406q. Recent i flashed it using qpst but it got disconnected and now it is not booting up no matter what keys i press. The display doesn't turn on and charging logo is also not displayed. I've tried all methods like removing battery, charging for upto 24 hrs, but nothing worked. I've googled the symptoms of the device and i found that my phone is hard bricked. It is still being detected in device manager as "Qualcomm HS-USB Qdloader 9008 (COM 6)" I tried flashing it using QFIL Tool but it says that " Fail Failed to switch to edl mode"
I found another solution on the web which is burning a backup.img of the emmc file then the phone will boot into edl mode but i do not have a backup of the emmc file (my biggest mistake not to take a backup).
If anyone have the same device plz take a backup if emmc and upload it.
Please help me!!
hello every one :good:i have a lenovo a319 that stopped working after i wiped data instead of factory reset , wich apparently deleted the os and the recovery mode itself. now the phone does not turn on or charge ( no boot loop )and when i try to access the recovery mode the screen remains black. When i connect it to pc this error message appears '' the last usb device you connected to this computer malfunctioned and windows does not recognize it''
aditional info ; the phone had a custom rom
this is my first thread here , thank you everyone .:good: