Related
Use this at your own risk. I wont be responsible for any damage of your phone.
THis will only work in stock 4.2.2 ROM or any stock based ROM.
Kernel Features
1) Some cpu governor added.
2) Some I/O scheduler added.
3) Multi core scheduler support.
4) Fastcharge enabled.
5) LZO compression method.
Cpu governors
1) Intelliactive
2) hotplug
3) smartassV2
4) conservative
5) ondemand
6) powersave
7) interactive
8) performence
I/O Schedulers
1) noop
2) deadline
3) cfq
4) zen
5) vr
6) sio
7) sioplus
Default cpu gov = intelliactive
Default I/O scheduler = sio
Go to the download tab to download . Flash the tar file via odin. Or download the zip and flash it via custom recovery.
YOu can change the governor and scheduler by any kernel optimizer app. I use kernel adiutor.
XDA:DevDB Information
[Kernel][BlackHorse] for Samsung GT-7582 and GT -7580, Kernel for all devices (see above for details)
Contributors
Yasinarefin
Sources = coming soon
Version Information
Status: Beta
Created 2015-04-27
Last Updated 2015-04-27
question
how much can i overclock or underclock by this kernel? and any known bugs?
zip is not flashing. showing error.
---------- Post added at 12:10 PM ---------- Previous post was at 11:57 AM ----------
mushfiqsaif said:
how much can i overclock or underclock by this kernel? and any known bugs?
zip is not flashing. showing error.
Click to expand...
Click to collapse
any solution?
Thanks and nice job
thanks bro! great kernel
hotplug
where is the download link ?
How to flash this kernel.i wanted to flash this using cwm....is it simple as like flashing a zip on cwm.
With CWM zip can't flashed, showing error (Status 0) . Installation aborted.
I try Flash the tar file via odin.
Thanks.
Download link
Where is the download link?
This post can be updated anytime.
For korean support and for those who can translate Korean, visit my blog:
http://kykint.tistory.com/
Download TWRP Recovery v2.8.7.0 for G906SKL
/* Requirements */
* Galaxy S5 broadband LTE-A (SM-G906S, G906K, G906L)
* Samsung stock firmware or Dokdo-projct
- Kitkat: ANK1
- Lollipop: BOG2 for G906K, BOH1 for G906S/L
* Custom recovery (Philz, TWRP, etc)
/* Note before using */
* Backup important data before installing
* Upon installation, every warranty inclusing KNOX becomes void
* I, kykint, am not responsible for any inconvenience or problems that occur while using this kernel
* Only one hotplug driver should be on (mpdecision, intelli_plug, alucard_hotplug, lazyplug)
Lazyplug is currently not supported on kernel customizing applications. Wait until their developers update.
* Dokdo-Project version of lolliwiz is highly experimental. Don't complain about battery drain.
It also does not support uninstaller yet.
/* About new installer */
Since Release 9, the installer will automatically extract your device's ramdisk, merge it with lolliwiz kernel, and then install it.
Upon installation, if a backup folder (/system/lolliwiz-bak) is found, it will automatically restore it first and then continue installation.
It will backup original boot.img and sensors library to the backup folder (/system/lolliwiz-bak) while installing.
There might be some problems regarding this new installer, so please keep the following instructions in mind.
* When installing another variant's ROM, do not install lolliwiz right after flashing ROM.
Install the stock kernel of your variant, and then install lolliwiz.
* Those who have been using R8 or older version of lolliwiz must flash stock kernel first before installing R9 or later.
* Do not install stock kernel when lolliwiz is installed on your device.
Only install stock kernel when uninstaller fails to remove lolliwiz and restore to stock kernel.
/* Kernel features */
Built with custom compiled krait-optimized UBERTC 5.2.1
Various compile optimization flags
Various improvements backported from Linux mainline
CPU Governors: franco interactive & conservative, intelliactive, and a lot more
I/O Schedulers: CFQ, ROW, DEADLINE, SIO, FIOPS
Custom hotplug drivers: intelli_plug, alucard_hotplug, lazyplug
CPU Voltage control
Adreno_idler GPU governor addon
Simple_ondemand is not crashing anymore
Display gamma control
Dynamic FSync Control
SELinux set as permissive by default
FauxSound ported for wcd9330 (LP only)
Support for kernel mode NEON
Optimized Kernel Samepage Merging
Quickwakeup driver by Motorola
Random driver ported from latest Linux mainline
Adaptive LowMemoryKiller
Full support for F2FS
Power-efficient Workqueue
Unaligned access support for lib
Init.d script support
Various minor fixes and improvements
/* Changelogs */
Refer to the 3rd post
/* Kernel customization */
Recommended applications: Kernel Adiutor, TricksterMod
/* Downloads */
Lolliwiz & stock kernels
Previous versions of lolliwiz
LW-G906-Dokdo-R*.zip : for Dokdo-Project users
LW-G906-R*_F2FS.zip : for F2FS users
/* F2FS Conversion Manual */
Refer to the 2nd post.
/* Chatters */
Release 9 and 10 are mostly bug fix releases, so there isn't much difference.
Kitkat support has been put off to R11, and if a bug is found again and R11 happens to be released early, it will be put off to later release again.
Still, I'm considering EOL of kitkat version as it is becoming harder to support the old Linux version.
/* Contacts */
You can contact me through telegram @maplezeon, but I won't listen to complaints.
On weekdays I'm mostly at school, from 7am to 10pm, so there's no much time for chats.
/* Source */
http://pc.cd/U2YrtalK
/* Special thanks to */
세이님, 티라미슈님, hsk님, arter97님, JustArchi, Christopher83, faux123,
franciscofrancoeng.stk, flar2, imoseyon, friedrich420, Google, Samsung
and every single one of you guys, for using my kernel
XDA:DevDB Information
Lolliwiz Kernel for SM-G906, Kernel for the Samsung Galaxy S 5
Contributors
kykint
Source Code: http://pc.cd/U2YrtalK
Kernel Special Features:
Version Information
Status: Stable
Created 2015-04-28
Last Updated 2015-09-11
Changelogs
Release 10 - Sep 7
Reverted GCC 5+ compatibility improvement patches
=> Hopefully fixed some applications disappearing
Unaligned access enabled explicitly for lib
Release 9 - Sep 6
Brand new installer
=> Now support all three variants (S/K/L), boot.img and sensors library are backed up in /system/lolliwiz-bak
Add uninstaller
Fixed proximity sensor not working
=> Caused by Merge of G906K Kernel source, solved by installing sensors library from OG2 firmware
Applied patches regarding media driver
Updated lz4 source and enable unaligned access
NVIDIA's power savings patch
Westwood as default TCP congestion control method
Optimized intelli_plug
New hotplug driver: Lazyplug by arter97
=> Currently not supported on kernel setting applications, wait for updates
Some GCC 5+ compatibility improvements
Release 8 - Sep 1
Added experimental support for Dokdo-Project
(Compatible with all three variables and every version of Dokdo-Project)
KK support dropped at the moment
LP: Common: Merged G906K OG2 kernel source
LP: kt: Merged OG2 ramdisk
LP: skt,lgu: Merged OH2 ramdisk
LP: kt: fixed a typo in ramdisk
Linux 3.10.70
Full F2FS support + source updated to the latest
Power-efficient workqueue
Random driver backported from Linux 4.2+
Another new hotplug driver - Alucard hotplug
Custom built UBERTC with Krait optimizations
New build optimization flags
Fixed min cpu frequency changing on its own
Dynamic fsync disabled by default
built-in support for NTFS
Other miscellaneous fixes and updates
Release 7 - Jun 28
LP: Imported patches from upstream (1,000+ patches)
LP: Linux 3.10.59
KK: Imported patches from upstream (300+ patches)
KK: Linux 3.10.6
Compile optimization flags from arter97's kernel, big thanks to @arter97
Added adreno_idler addon for adreno-msm-tz GPU governor
Removed Simple GPU Algorithm
Switched to UBER Toolchain, GCC 5.1
Added motorola's quickwakeup driver
Added patches to reduce wakelock
Backported random driver from Linux 4.0.6
Optimized KSM
Added adaptive_lmk
Various small fixes & improvements
Release 6 - May 30
Added support for KitKat
Fixed wrong boot.img arguments
Fixed Sweep2Sleep not working on some variants
Removed SEANDROID warning on boot logo
Added advanced TCP congestion methods
Disabled crc check for better performance
Merged BOE1 changes
Ramdisk compressed with LZ4
Other small tweaks & fixes
Release 5 - Apr 20
Removed smartassV2 CPU Governor
Added mythx_plug CPU Governor
Added support for kernel NEON mode
Removed Franco's Sound Control
Ported FauxSound for work with wcd9330
Applied patches for gpu and video driver
Imported latest interactive & conservative governor from franco's shamu kernel
Added support for KSM on/off
Enabled tuning option for Cortex-A15
Some minor fixes from faux123
F2FS Conversion manual
/* F2FS Conversion Manual */
(for LP and Dokdo-Project only, no KK support)
(Not tested on Dokdo-Project)
I will not add any additional explanations about F2FS, since this is a very risky task and recommended only for experts,
and since not knowing about F2FS means that you're not one of them.
Cautions
1. Conversion process of /data partition and filesystem will wipe away every single data in your device,
so every data in internal sdcard should be backed up on your PC.
2. Flashing /cache partition image when the device has already been converted to F2FS will format /cache partition to EXT4,
so manual conversion process of /cache partition to F2FS must be done again.
3. The /cache partition image mentioned above is included in stock firmware package, so be careful when installing stock firmware
4. Inside stock firmware is included a stock kernel which only supports EXT4, so again, be careful when installing stock firmware
5. /data and /cache partition must be set to the same filesystem, both EXT4, or both F2FS
6. I personally recommend that every process be done using my TWRP recovery, which will be posted in a seperate thread later.
7. The F2FS version of kernel zip has a '_F2FS' tag at the end of its filename, while EXT4 has nothing.
Be careful, Dokdo-Project version supports both EXT4 and F2FS, so they're not seperated,
and when converting to F2FS on Dokdo-Project, you can skip kernel switching(reinstalling) process.
How to change filesystem on TWRP
Wipe > Advanced Wipe > (Select a partition) > Repair or Change File System > Change FIle System > (choose between EXT4 and F2FS) > Swipe to Change
* It takes a great amount of time when changing to EXT4, up to several minutes.
How to check current filesystem on TWRP
Wipe > Advanced Wipe > (Select a partition) > Repair or Change File System
and you'll see your current filesystem on the upper part of the screen.
Converting to F2FS
0. For stability, flash uninstaller first if you already have lolliwiz installed.
1. Install F2FS version of Lolliwiz. (_F2FS.zip)
2. Change the filesystem of /data and /cache partition to F2FS.
3. Reboot into recovery mode again.
Back to EXT4
0. For stability, flash uninstaller first if you already have lolliwiz installed.
1. Install EXT4 version of Lolliwiz.
2. Change the filesystem of /data and /cache partition to EXT4.
3. Reboot into recovery mode again.
Installing stock firmware on F2FS
1. Reboot into download mode and install stock firmware with odin as usual.
2. When the installation finishes, it'll automatically reboot into recovery mode and flash CSC package.
Wait until androboy disappears and the device reboots again.
3. Reboot into download mode again.
4. Install my TWRP.
5. Reboot into recovery right after installing.
6. Install F2FS version of lolliwiz.
7. Format /cache partition to F2FS
8. Run factory reset if needed. This is an option.
9. Reboot.
If the device won't boot even if you carefully followed all of the above instructions, repeat the process again.
Thanks
Thanks I was on the Korean forums yesterday trying to translate lol.
I noticed there's a test for b5. Giving it a try.
One issue I seem to have on b4 and 5 test is that no matter what kernel tuning app I use if I turn off mpdecision and intelliplug on, after a reboot mpdecision always comes back on.
Audioboxer said:
I noticed there's a test for b5. Giving it a try.
One issue I seem to have on b4 and 5 test is that no matter what kernel tuning app I use if I turn off mpdecision and intelliplug on, after a reboot mpdecision always comes back on.
Click to expand...
Click to collapse
Kernel settings are set to defaults on each reboot and the default setting on hotplug is mpdecision on, intelli_plug off. That's why every kernel app has the ability to restore previous settings after reboot. Try enableing them, kernel adiutor works fine for me
kykint said:
Kernel settings are set to defaults on each reboot and the default setting on hotplug is mpdecision on, intelli_plug off. That's why every kernel app has the ability to restore previous settings after reboot. Try enableing them, kernel adiutor works fine for me
Click to expand...
Click to collapse
Thanks, but I told it to save settings. It's weird as all the settings were saved, including intelliplug on, but mpdecision was turned on as well. I'll uninstall it and start again!
Do you have a donation link btw?
Edit: Here is what I mean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit2: Strange, I reflashed the kernel and it is now working!
Audioboxer said:
Thanks, but I told it to save settings. It's weird as all the settings were saved, including intelliplug on, but mpdecision was turned on as well. I'll uninstall it and start again!
Do you have a donation link btw?
Edit: Here is what I mean
Edit2: Strange, I reflashed the kernel and it is now working!
Click to expand...
Click to collapse
Nice to hear it's working well now.
I don't get donations, maybe you could donate to the REAL developers out there, they're always working hard for us XD
Very interesting!
I'm reading the Asian forums since a week and I have found that this kernel is well used.
How can I flash back stock kernel if something happens? And where can I find stock kernels??
If they are unavailable, I'd like to make my own Odin tar.md5 files for flashing stock kernel.
Can I follow the script/batch procedure (found here on Xda) that produces the tar.md5 flashable files?
Tnx!!
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Thanks
PIRATA! said:
Very interesting!
I'm reading the Asian forums since a week and I have found that this kernel is well used.
How can I flash back stock kernel if something happens? And where can I find stock kernels??
If they are unavailable, I'd like to make my own Odin tar.md5 files for flashing stock kernel.
Can I follow the script/batch procedure (found here on Xda) that produces the tar.md5 flashable files?
Tnx!!
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Click to expand...
Click to collapse
No worries, I'll upload stock kernels for recovery/odin as soon as I get back home
kykint said:
No worries, I'll upload stock kernels for recovery/odin as soon as I get back home
Click to expand...
Click to collapse
Can you do it also for KitKat if you have then?
Tnx.
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Sharing battery based profile still in testing
Hi everyone ,
i would like to share my battery based profile.
I used Trickstermod kernel app taken from bbs dot sonyue dot com
( The kernel app is under attachment)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Install the app.
2. Open the app, at top left a list will open, Choose the General
3. Change the following
I/O Control:
Read Ahead Buffer Size 1024
Schedular fiops
CPU Frequency Control
Frequency Lock ON
Min 300000 (choose the lowest scroll to the top first)
Max 1574400
CPU Governor Control
Governor Conservativex
------------------------------------------------------------------------------------------------------------------------------------------
4. Now Choose Specific
Mp-Decision OFF
Intelli-Plug ON
Dynamic FSYNC ON
GPU Governor Powersave
GPU Max Frequency 240
Intelli-Thermal Control ..........> Intelli-Thermal ON
MPU Voltages
( I undervolted from Snapdragon 805 thread in xda)
< 300MHz 700
< 345MHz 710
< 422MHz 720
< 499MHz 730
< 576MHz 740
< 652MHz 750
< 729MHz 760
< 806MHz 770
< 883MHz 780
< 960MHz 820
< 1036MHz 830
< 1113MHz 840
< 1190MHz 850
< 1267MHz 860
< 1344MHz 870
< 1420MHz 880
< 1497MHz 890
< 1574MHz 900
< 1651MHz 910
< 1728MHz 920
< 1804MHz 930
< 1881MHz 940
< 1958MHz 950
< 2035MHz 960
< 2112MHz 975
< 2188MHz 990
< 2265MHz 1005
< 2342MHz 1020
< 2419MHz 1035
< 2457MHz 1040
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Or You can download the profile in attachment and do the following:
1. Download the profile and extract it.
2. Go to your phone storage and look for a folder name tm_profiles
3. Paste it there.
4. Open the trickstermod app.
5. press at the top left and choose Tool.
6. You will find Global Profile. press restore and choose my profile Battery Test V2 pvs11 .
----------------------------------------------------------------------------------------------------------------------------------------------------------------
I hope you will test it guys and my aim is just battery light user no gaming.
Please feedback its just test if you more knowledge share as i already contacted the OP permission to open a profile thread.
@kykint
Undervolting source
http://forum.xda-developers.com/htc-one-m8/general/guide-snapdragon-801-clocking-voltage-t2807173
kardinal969 said:
Hi everyone ,
i would like to share my battery based profile.
I used Trickstermod kernel app taken from bbs dot sonyue dot com
( The kernel app is under attachment)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Install the app.
2. Open the app, at top left a list will open, Choose the General
3. Change the following
I/O Control:
Read Ahead Buffer Size 1024
Schedular fiops
CPU Frequency Control
Frequency Lock ON
Min 300000 (choose the lowest scroll to the top first)
Max 1574400
CPU Governor Control
Governor Conservativex
------------------------------------------------------------------------------------------------------------------------------------------
4. Now Choose Specific
Mp-Decision OFF
Intelli-Plug ON
Dynamic FSYNC ON
GPU Governor Powersave
GPU Max Frequency 240
Intelli-Thermal Control ..........> Intelli-Thermal ON
MPU Voltages
( I undervolted from Snapdragon 805 thread in xda)
< 300MHz 700
< 345MHz 710
< 422MHz 720
< 499MHz 730
< 576MHz 740
< 652MHz 750
< 729MHz 760
< 806MHz 770
< 883MHz 780
< 960MHz 820
< 1036MHz 830
< 1113MHz 840
< 1190MHz 850
< 1267MHz 860
< 1344MHz 870
< 1420MHz 880
< 1497MHz 890
< 1574MHz 900
< 1651MHz 910
< 1728MHz 920
< 1804MHz 930
< 1881MHz 940
< 1958MHz 950
< 2035MHz 960
< 2112MHz 975
< 2188MHz 990
< 2265MHz 1005
< 2342MHz 1020
< 2419MHz 1035
< 2457MHz 1040
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Or You can download the profile in attachment and do the following:
1. Download the profile and extract it.
2. Go to your phone storage and look for a folder name tm_profiles
3. Paste it there.
4. Open the trickstermod app.
5. press at the top left and choose Tool.
6. You will find Global Profile. press restore and choose my profile Battery Test V2 pvs11 .
----------------------------------------------------------------------------------------------------------------------------------------------------------------
I hope you will test it guys and my aim is just battery light user no gaming.
Please feedback its just test if you more knowledge share as i already contacted the OP permission to open a profile thread.
@kykint
Undervolting source
http://forum.xda-developers.com/htc-one-m8/general/guide-snapdragon-801-clocking-voltage-t2807173
Click to expand...
Click to collapse
Good!
I'm following the Asian forum where I've found this kernel and related config app, from which I've read that there's a modified version of the app....And for this please give me some infos.
I'm also searching for some interesting custom rom as I see there are some, like the KingWolf one or the Milan one.
Any help on using this kernel with some roms?
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
PIRATA! said:
Can you do it also for KitKat if you have then?
Tnx.
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Click to expand...
Click to collapse
I uploaded lollipop stock kernels for both recovery and odin. I'll upload for kitkat as well when I get the latest kitkat firmware.
Sorry, this might be a dumb question, but I'd rather ask it then brick my only smart-phone:
I'm currently on miscom's ROM (see here: http://forum.xda-developers.com/galaxy-s5/development/galaxy-s5-g906-custom-rom-t2848569)
Also using Philz recovery
How do I get to the Lolliwiz Kernel safely? Can I keep my apps, settings and so on?
Again, sorry. This is my first android phone (but certainly not the last one!) and I'm pretty clueless... But getting the miscom kernel on it was pretty easy with a bit of reading...
mcbrite said:
Sorry, this might be a dumb question, but I'd rather ask it then brick my only smart-phone:
I'm currently on miscom's ROM (see here: http://forum.xda-developers.com/galaxy-s5/development/galaxy-s5-g906-custom-rom-t2848569)
Also using Philz recovery
How do I get to the Lolliwiz Kernel safely? Can I keep my apps, settings and so on?
Again, sorry. This is my first android phone (but certainly not the last one!) and I'm pretty clueless... But getting the miscom kernel on it was pretty easy with a bit of reading...
Click to expand...
Click to collapse
Make a backup of whole apps with TitaniumBackup first, then backup system, data, boot in philz recovery(run custom backup) and flash stock lollipop through odin. miscom's rom is 4.4.2 as I know of, and my kernel supports 5.0.1 only at the moment.
If your phone bootloops after flashing lollipop, factory reset through philz and restore apps from TitaniumBackup, or flash back stock kitkat firmware and then restore system, data, boot in recovery.
Note that flashing stock firmware will blow away your recovery and you should manually install it again with odin. Also, factory reset through philz will preserve your internal sdcard but stock recovery WILL NOT.
kykint said:
Make a backup of whole apps with TitaniumBackup first, then backup system, data, boot in philz recovery(run custom backup) and flash stock lollipop through odin. miscom's rom is 4.4.2 as I know of, and my kernel supports 5.0.1 only at the moment.
If your phone bootloops after flashing lollipop, factory reset through philz and restore apps from TitaniumBackup, or flash back stock kitkat firmware and then restore system, data, boot in recovery.
Note that flashing stock firmware will blow away your recovery and you should manually install it again with odin. Also, factory reset through philz will preserve your internal sdcard but stock recovery WILL NOT.
Click to expand...
Click to collapse
Wait a minute!!! I though that factory reset in Philz recovery for G906 was not working and doing that would brick the phone!!!!!
I've read this in the info thread on the S5 G906 here on XDA!!!
Look under here in the Known issues:
prodigiez said:
.........
CWM
Unofficial PhilZ recovery is also available as below
Credit to hsk for unofficial CWM
updated : adb fix for cwm
Source: http://www.matcl.com/?m=bbs&bid=appDB&where=subject|tag&keyword=hsk&uid=231166
PhilZ Touch official thread http://forum.xda-developers.com/showthread.php?t=2201860
Download unofficial philz cwm here
This document is unofficial (Unofficial) ported version.
There may be bugs, so please use at your own risk.
Before flashing this, you must understand the contents of this post after you decide whether to apply please.
G906S/K/L = Tested working.
Flashing guide
Flash philz cwm with Odin as AP/PDA
Uncheck Auto Reboot and Start flashing.
Once completed , disconnect the USB cable and enter recovery manually by pressing the combination key.
Recovery time and date synchronization
PhilZ Settings - GUI Preferences - Time Setup - Change date and time - Qualcomm Time Daemon and (x) check - Yes Load Time Daemon
PhilZ Settings - GUI Preferences - Time Setup - Time Zone ( your preferred timezone )
Date / time will be synchronized with the system.
Reboot device.
Known issues:
KNOX Warranty 0x1
.
Wipe Data / Factory Reset from Clean to Install a New ROM feature is not working and might brick your device. Do not use this feature. If you brick your device , you may download the stock firmware from sammobile and flash it with ODIN.
CWM does not work with adb. CWM now works with ADB
CWM does not work with aromafm.
Credit to : XDA , PhilZ , hsk , bluecloud ,dougiebee and whoever involve. Tks
.......
Click to expand...
Click to collapse
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Great.... Bricked it.... Gonna need you guys' help again....
Did it like instructed... After flashing stuck lollipop, stuck on the second boot logo ("olleh o" for me).
Since recovery went back to stock, tried a factory reset and cache delete from the stock recovery... no help....
UPDATE: HOLD THE HELP!!! Unbricked it! On Stock Lollipop now... Working on it... Will get back to you....
I compiled this kernel using linaro 4.8 toolchain from official LGE-D295 kernel sources and adding these some features:
Added CPU underclock to 249 & 192 Mhz (default CPU freqs is 0.3-1.2 GHz, so you need to set up underclock in Kernel Auditor)
Added support for FAST CHARGE function (disabled by default - for enable use Fast Charge)
Default governor changed to ondemand
Default I/O sheduler changed to CFQ
Added new CPU governors: interactive, conservative, pegasusQ
Added some new I/O shedulers: BFQ, SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN.
Information:
Developer: Nikita Pro Android
Tester: kubarek777 (4pda)
Kernel version: 3.4.10
Device model: D295
ROM: STOCK 4.4.2
Installation:
1. Download and put to storage: >>>LINK<<< (v1.0)
2. Go to recovery and wipe cache.
3. Flash downloaded .zip and reboot.
4. Reboot again!
5. This is all.
To set up CPU frequency and another kernel parametres use: Kernel Auditor
Source code: https://github.com/NikitaProAndroid/android_kernel_lge_msm8610_l70pds/tree/master
Nikita Pro Android said:
[/HIDE]
Installation:
1. Download and put to storage: []>>>LINK<<< (v1.0)[]
2. Go to recovery and wipe cache.
3. Flash downloaded .zip and reboot.
4. Reboot again!
5. This is all.
Click to expand...
Click to collapse
The link not available, new link please..
[KERNEL] [ROOT] [SM-N920T/W8] Exynos 7420 | SkyHigh Kernel [ v6.8.0-EOL ] | Synapse | Aroma | F2FS | UBERTC 6.2.1 20161012
The BEST & FULLY FEATURED EXYNOS 7420 KERNEL IS REBORN . . . . .
Many select patches for better security, performance and efficiency (not all listed). THERE IS "NO NEED" to tweak anything -- Just FLASH it !! But, if you desire, can further tweak many settings and available features with Synapse to suit your own habits and device capability. That is for you to find out
SUPPORTED DEVICES:
SM-N920T
SM-N920W8
RAMDISK BASE:
N920T : N920TUVS4DPH2
FEATURES:
Modified from the LATEST device specific official Samsung source(s): Samsung OSRC
AUTO-ROOT SYSTEM-LESS SR3-SuperSU-v2.78 (on flash)
KNOX WARRANTY VOID: 1
SELinux PERMISSIVE (default) or ENFORCING
DEEP SLEEP FIX
UX ROM (BOOT support only)
AROMA Installer (set your own defaults)
Auto-Install busybox v1.24.1-Dorimanx & Sqlite3 to /system/xbin (on flash)
Compiled with UBERTC 6.2.1 20161012 + Graphite optimizations
Linux 3.10.104
init.d script support (drop in script & set permissions to 755 or 777 and reboot)
adb insecure
stock dt.img
Secure storage = false (should prevent WIFI settings & passwords wiping on reboots)
Reduced logging
F2FS experimental support (Much faster I/O - write speeds).
exFAT FS support
NTFS R/W support with app
CIFS support (not tested)
ISO 9660 CDROM & UDF FS support
Frandom
mount all partitions NOATIME (better performance & efficiency)
mount EXT4 /data & /cache partitions LAZYTIME (better performance & efficiency)
A53 LITTLE cores increased boot frequency (faster boot)
LZO ramdisk de/compression algorithm (faster boot)
CLEANCACHE & ZCACHE
Microsoft X-BOX gamepad controller module (updated)
Slub tweaked
Invisible CPUSETs (better efficiency)
A tonne of select patches for features, better performance & efficiency
Synapse app support for many kernel configurations + much much more !!
SYNAPSE FEATURES:
Too many too list . . . Have a look through Synapse yourself. If you don't know, then read and research or leave it DEFAULT !!
About
A57 CPU frequency scaling
A57 voltage control
A53 CPU frequency scaling
A53 voltage control
CPU governor
A57 governor tunables
A53 governor tunables
Multicore
CPU stats
Boost
GPU frequency scaling
GPU voltage control
Thermal
BUS
IO
Memory
Advanced
Power Suspend
Doze
Wakelocks
Audio
Battery
LED
Screen
Network
Security
FS (file system)
CortexBrain
Crontab
USB mode
Modules
Backup & Restore profiles + EFS (auto on boot to /sdcard/SkyHigh/EFS)
Logs
Reboot
Info
CREDITS:
My family !!
Chainfire - root & SuperSU app
AndreiLux - years of support for Exynos development and his various kernel features + Synapse app and UCI code
halaszk88 - patches and some Synapse code I adapted to many of my kernels
dorimanx - BusyBox and various ramdisk tweaks/ideas
apb_axel - I adapted and used many of the Synapse controls to suit my kernels
arter97 - various source fixes/patches
ktoonsez - ktoonservative hotplug governor
YashdSaraf - BusyBox-Cleaner script
Android File Host
Linus Torvalds & Linux Foundation
Google & Samsung OSRC
and many others!
All those in my select private group that have provided constructive feedback, help, and support.
IF I'VE FORGOTTEN ANYONE, PLEASE DON'T BE SHY AND SPEAK UP, THANKS
XDA:DevDB Information
SkyHigh Kernel for N920T/W8 devices, Kernel for the T-Mobile Samsung Galaxy Note5
Contributors
UpInTheAir
Source Code: https://www.androidfilehost.com/?w=files&flid=88214
Kernel Special Features: Aroma - Synapse ++ almost everything !!
Version Information
Status: Stable
Current Stable Version: 6.8.0-EOL
Stable Release Date: 2016-11-19
Created 2016-07-30
Last Updated 2016-11-19
License - requirements - installation - download - source
DON'T POST LAME QUESTIONS THAT YOU CAN FIND THE ANSWER TO BY A LITTLE SEARCHING.
I AM NOT GOOGLE & NEVER PRETEND TO KNOW EVERYTHING, SO A LITTLE HELP FROM YOURSELF WILL GO A LONG WAY. . .
THANKS & ENJOY !!
** LICENSE & DISCLAIMER **
/*
© Copyright (c) 2015-2016 UpInTheAir <[email protected]>
All rights reserved. The alterations from OEM, associated script files and coding packed within this ramdisk & installation package (the "Software"), may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder. For permission, contact [email protected].
The above copyright notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF , FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
In plain language
DO NOT STEAL MY SH*T !!
UpInTheAir is NOT responsible, the person you see in the mirror is !!
REQUIREMENTS:
Supported variant only !!
Touch Wiz Android M 6.0.1 ROM or UX leaked firmware (beta support)
Appropriate custom recovery (i.e..TWRP for your variant)
INSTALLATION & UPDATE:
If you have Synapse installed = = you must clear Synapse app data before flash !!
Device Settings: Enable Developer Options > OEM UNLOCK is ENABLED
Boot into custom recovery (volume UP + home + power)
DO NOTHING but flash SkyHigh kernel.zip (ALWAYS flash again AFTER any custom ROM installation, system or data wipe)
After flash == DO NOTHING but REBOOT IMMEDIATELY from TWRP or you will have to re-flash !!
CONVERT EXT4 TO F2FS FS:
If not already, install the latest TWRP for your device variant (ie. 3.0.2-2). This must support F2FS.
Boot into TWRP.
Insert USB-OTG
** ALL DATA WILL BE WIPED FROM INTERNAL STORAGE (restored later)
Backup (copy) all important files (incl. your NANDROID) off device (ie. from internal storage > USB STORAGE). This can take a while. Advanced > File Manager > .....
Home > Backup > Select Storage > USB Storage > OK > "Swipe to Backup" (Only need DATA, but recommend to backup all partitions).
Install > Select Storage > USB Storage > OK.
Select f2fs.zip > "Swipe to confirm flash" (This will WIPE ALL DATA !! & convert DATA & CACHE to F2FS. System is not supported by kernel).
Check the box to remember setting and “Swipe to allow Modifications”.
If you do not have Step #8, then Data was not converted to F2FS.
Mounts > unchecked both Cache & Data. Repeat Step #7 & 8.
Restore > Select Storage > USB Storage > OK > Select TWRP Backup folder > DATA ONLY !! > "Swipe to Restore" (ignore warning about EXT4).
Home > Install > Select Skyhigh_kernel.zip > "Swipe to confirm Flash".
Home > Mount > USB STORAGE > uncheck/unmount (then remove USB-OTG).
Home > Reboot > SYSTEM.
Wait ~2-5 mins for boot.
Once booted, let stabilize for ~5 mins.
You can check Data & Cache F2FS FS status in either /proc/mounts or Synapse app (FS section).
Use a root type explorer (su permission) & navigate to /sdcard, and delete the "0" folder.
Move (copy) your backed up files from Step #4 to internal storage (/sdcard). This can take a while. Maybe one folder at a time is better?
ISSUES ?
If using TWRP MTP mode, deleting some folders/files may crash TWRP and cause corruption. Instead, use a root type file explorer to delete from device.
If you need to wipe data, then use the ext4 or f2fs.zip, otherwise this is not possible with this TWRP !!
Not tested any method with customized ROMs. The ROM installer script may re-format partitions back to EXT4 or not mount correctly causing TWRP crash or corruption. I can only suggest to Flash ROM with EXT4 FS > make a NANDROID on USB-OTG and then follow the F2FS steps above.
CONVERT F2FS TO EXT4 FS:
The Same steps as above, but use the ext4.zip !!
OPTIONAL SYNAPSE INSTALLATION:
After boot:
Wait at least 120 secs to stabilize
Install Synapse app from Google Play and rate it ☆☆☆☆☆ !!
Open Synapse
Tap "Understood"
So changes stick every time you start Synapse == Make any change & 'apply'.
Recommend: Disable KNOX with Synapse
DOWNLOADS:
** I will NEVER support KOREAN (S/K/L) variant. Get over it and flash ARTER kernel instead !! **
Mod Edit: Link removed.
BUGS:
Aroma Installer: 10% of installation will encounter Aroma installer "freeze". It's only the display that freeze, the script still execute in the background. Just wait a minute, then press slightly to the top right 'home' key / top left of the 'back' key . . .
UX BETA firmware - blue light filter
UX BETA firmware - torch light (some ROMs)
HD voice ? - Speakerphone: other party cannot hear voice
SOURCE - ALL SkyHigh VARIANT:
Available upon request.
v6.6.1 AFH
v6.8.0 uploaded soon. . . . .
.
FAQ & HELP
TROUBLESHOOTING GUIDE:
I might not have your device variant and or able to reproduce your "issue".
Please provide as much information as possible.
Without resetting your device to a stable unmodified baseline, any potential troubleshooting or logs could be meaningless.
So please follow the guidelines set out below. Users can't "read minds".
Without providing important information, we are unable to help YOU.
Search thread, XDA and Google before posting
Provide as much information as possible.
- Device model
- Firmware version
- ROM name / version
- Kernel version
- Modem version
- Bootloader version
- Synapse settings (try default)
- Installed tweaks and apps etc (Xposed ?)
- The exact steps you've taken to try resolve the issue yourself.
Exact steps to reproduce the issue. Provide screenshots if able.
Does it work with older / other versions etc
Reset your device to a stable baseline (ie. stock) with only custom TWRP recovery and kernel (FULL WIPE: system, cache, dalvik-ART)
Possible logs
FAQ & HELP:
CAN I BUILD A KERNEL FOR YOUR __XX DEVICE ?
Sorry. I don't have the spare time for any more variant support.
Additionally, I do not build for any device that I can not compile using SAME source, personally test method or debug. Some device variants can compile with same source.
CAN I INCLUDE SkyHigh KERNEL IN MY ROM
NO == My ramdisk modifications are COPYRIGHT (refer LICENSE in Post #2), and distribution without MY (UpInTheAir) prior written consent is not only in a breach of that license, but also XDA Rule #12)
Although I do appreciate your contribution, if you could please do not include my kernel in any ROM package etc. This policy goes for anyone.
Having my kernel distributed outside my development thread just removes a lot of credit and more importantly, constructive user feedback that could be helpful to my development or user issue.
ALWAYS on DISPLAY (AoD)
I have spent some time to attempt port S7 display drivers to our kernel, but haven't had success as yet with too many errors.
TBH, it's a lot of work for something I'm not really interested in or would use. . . so I don't wish to spend any more of my own time on it, sorry. If someone else does it, GREAT
DO I "NEED" SYNAPSE
THERE IS NO "NEED" !!
It is "recommended", which is OPTIONAL, and not "needed".
It is for ADVANCED or adventurous users who wish more control of their device or use various features I've added.
Using any other optional tweaking or control app may conflict & many features and options won't be available.
WHY WAIT 120 SECS
The kernel and Synapse scripts need time to boot up properly and allow SU permission.
There are scripts / code that have a deliberate delay and must run after Synapse. These are not user optional.
Synapse has a stability check on boot. You may get "synapse boot cancelled".
Thermal throttling will be trying to limit many things, let the device settle
OTHER PARTY CAN NOT HEAR VOICE ON SPEAKER PHONE
It could be a conflict in the system/etc/mixer_*.xml. I don't know for sure, but if I exclude the sound mod, then this "fixes" the problem.
As I cannot reproduce the issue (and the majority), then the audio mod stays.
Unfortunately, making it optional would require to build kernels without and create much more work for many device I don't actually use.
Either live with it, or use another kernel. Sorry.
"NO UCI SUPPORT"
It's a ROM busybox compatibility issue !!
Re-flash kernel as per Installation Instructions. (kernel install zip flashes proven busybox binary to /system/xbin)
BACKUP / RESTORE ISSUES
It's a ROM busybox or sqlite3 compatibility issue !!
Re-flash kernel as per Installation Instructions. (kernel install zip flashes proven busybox binary to /system/xbin)
BACKUP & RESTORE
DO NOT restore profiles from different kernel version
Refer to THIS post for "how-to" screen-shots
Refer to THIS post for a "how-to" video
LOADABLE MODULES AREN'T WORKING
Check your /system/lib/modules directory. Are any ____.ko present?
Did you flash a ROM or wipe the system partition at any point? Doing this will remove them !
Re-flash the kernel will install the modules.
If modules aren't installed after flash, then re-flash and manually mount system in recovery first.
You can check running modules in terminal with:
lsmod
KTOONSERVATIVE GOVERNOR
Some info from the author HERE
DT2W & COLOUR CONTROL
No, I cannot make it work properly with single source for all supported variants
CPU POWER CONSUMPTION
The Samsung Exynos 7420 Deep Dive - Inside A Modern 14nm SoC (by ANANDTECH - Andrei)
F2FS SUPPORT
It's not needed. You wouldn't see any difference or measure much, if anything. Not worth the potential trade-off. This is not eMMC anymore
Storage Benchmarks
STUCK ON SAMSUNG BOOT LOGO AFTER FLASH
Ensure you flashed the correct kernel for your device model
Ensure your download is not corrupted. Check MD5 hash or re-download
Your current base firmware (ROM, boot-loader version etc.) may be incompatible - UPDATE to latest with Odin and try again.
CM SUPPORT
Read THIS
BATTERY TIPS (require updating !! )
Try some (or combination) of the CPU MULTICORE features in Synapse:
HMP profile = Default (values are battery orientated)
Power Aware Scheduling (slight performance cost) = Enabled
HMP LITTLE Packing (slight performance cost) = Enabled
PEWQ (power-efficient workqueue) (slight performance cost) = Enabled
Set A57 & A53 Interactive governor profile = Battery
Set Input-Booster for key/touchkey profile = Battery
Multi-tasking: enable UKSM & "low" or "quiet" profile (slight performance/battery cost)
PERFORMANCE TIPS (requires updating !! )
Set A57 & A53 Interactive governor profile = Performance
Set A57 & A53 Interactive governor = Turbo Mode (battery cost)
Set HMP threshold profiles = Stock or Performance
Once in a while:
Optimize Databases
FSTrim
RANDOM REBOOT
Don't UV or UC CPU or GPU
Use SkyHigh defaults
Use a stock UNMODIFIED ROM for your device variant
No tweaks, Xposed or other CPU control apps installed
Follow the TROUBLESHOOTING GUIDE
ASV_GROUP (ALL DEVICES ARE NOT CREATED EQUAL)
THIS is an example from my Exynos5420 source. Similar idea for Exynos4
DOWNLOAD LINK NOT WORKING
I want to keep this project all in one place - ☆☆ NO MIRRORS ☆☆
Please try again in a few minutes
POOR CPU/GPU BENCHMARK or GRAPHICS PERFORMANCE
Disable any CPU MULTICORE options in Synapse
Disable any Battery profiles in Synapse. Set to default or Performance.
Allow the device to cool. Repetitive testing will heat the device hardware and invoke thermal throttling and lead to decreased benchmark.
HIGH CPU/GPU OC == excessive heat == thermal throttling == reduced clock frequency == DECREASE PERFORMANCE
DYNAMIC MANAGEMENT OF DIRTY PAGE WRITEBACKS
by Christopher83
This feature allows to have two different intervals for dirty page writebacks and to dynamically manage them when the system has been resumed (it's active) or when has been suspended.
Three new procfs parameters are exposed inside /proc/sys/vm path:
dynamic_dirty_writeback is the activation status of this feature, set 1 to enable it, set 0 to disable it and use the standard behaviour
dirty_writeback_active_centisecs is the interval for the dirty page writebacks when the system is active (screen on)
dirty_writeback_suspend_centisecs is the interval for the dirty page writebacks when the system is suspended (screen off)
This feature is in part inspired on Francisco Franco's PATCH
TCP/IP NETWORK SECURITY
Thanks to zeppelinrox & V6SuperCharger
Hardening the TCP/IP stack to SYN attack
Bump up tw_buckets in case we get DoS'd
Ignore pings
Don't cache connection metrics from previous connection
Don't pass traffic between networks or act as a router
Enable spoofing protection (turn on reverse packet filtering)
Don't accept source routing
Don't accept redirects
Further reading:
http://www.cyberciti.biz/faq/linux-kernel-etcsysctl-conf-security-hardening
http://www.symantec.com/connect/articles/hardening-tcpip-stack-syn-attacks
CHROMECAST - STREAMING PROBLEMS
Lock screen MUST be enabled (simple screen lock swipe) I don't know why but it breaks the chromecast app's ability to resume smoothly if switched off
Synapse > Network > DTIM (both screen ON & OFF) = 1
Synapse > Network > WIFI Power Mode (screen OFF) = FAST
@UpInTheAir needed to create these threads to compile them for Synapse. He contacted me to close these as soon as he made them until he is ready with the finished product. Have patience.
Also I would like to apologize to UITA as the last ban may have been due to a system glitch where the signature was restored upon return, so was unjust. I have seen these glitches before and better communication might have prevented the error. We will do better going forward!
SkyHigh KERNEL REBORN - v5.6 released !!
SkyHigh KERNEL REBORN - v5.6 released !!
Hi fellow members.
Please find my latest release for SkyHigh kernel. There are many many changes, both visually (more / improved features) and a upgraded engine (better performance & efficiency) since I last publicly released. Far too many to talk about. . . .
And no - it DOES NOT fix call audio issue with leaked UX ROM. I believe it to be a ROM issue n!
Please note that although I have taken as much care in building and testing by my friends and I, the kernel may still not perform as hoped for you. Could be due to various factors including (but limited to):
hardware quality
firmware installed (incompatibility)
user habit (how you use the device)
apps & mods installed, customization's (conflicts)
user kernel settings (read them carefully - if in doubt == defaults)
As noted in Post #3, I may not have your device variant and not be always able to help either. In the end, sometimes SkyHigh is just not meant for you . . . .
If you have issues = = READ & FOLLOW ALL Posts #1-3
READ & FOLLOW THE INSTALLATION INSTALLATIONS EXACTLY (or else device will not boot)
Also please note (as per OP) the support for UX based ROMS is still in beta. I have personally tested very briefly, and also some of my friends (not all variant)
Enjoy
UITA
.
Welcome back with a MF'IN Vengeance and a new colorful avatar and best yet a beast of a kernel. Testing a few setups, glad to see ya here. Dr gave you a nice supply of xanax to deal with the idiots? :x
Sent from my SM-N920T using XDA-Developers mobile app
n0ve said:
Welcome back with a MF'IN Vengeance and a new colorful avatar and best yet a beast of a kernel. Testing a few setups, glad to see ya here. Dr gave you a nice supply of xanax to deal with the idiots? :x
Sent from my SM-N920T using XDA-Developers mobile app
Click to expand...
Click to collapse
BUG Report Update: UX firmware Bluelight Filter
The blue-light issue is in kernel source.
Compiled & flash SkyHigh + stock ramdisk + stock dt.img == no blue-light
Compiled & flash SkyHigh + stock ramdisk (with permission edits) + stock dt.img == no blue-light
Compiled & flash SkyHigh + UX ramdisk + stock dt.img == no blue-light
Compiled & flash SkyHigh + UX ramdisk + UX dt.img == no blue-light
Which all points to the source I’m using . . . and nothing I can do about it. That's leaked firmware and no proper source, what else to expect. . . .
So many menues on aroma installer i got lost any tips of what option do I have to choose please? Im on tmobile note 5 running darthstalker 9.0V marshmallow 6.0.1 PG1 baseband
torhect said:
So many menues on aroma installer i got lost any tips of what option do I have to choose please? Im on tmobile note 5 running darthstalker 9.0V marshmallow 6.0.1 PG1 baseband
Click to expand...
Click to collapse
Now. If you'd actually read any of Posts #1-3 you would know then to stay with DEFAULTS. You don't "have" to change anything.
Welcome back bud looks good
UpInTheAir said:
THREAD UNDER CONSTRUCTION !!
[KERNEL] [ROOT] [SM-N920T/W8] Exynos 7420 | SkyHigh Kernel [ v5.6 ] | Synapse | Aroma
The BEST & FULLY FEATURED EXYNOS 7420 KERNEL IS REBORN . . . . .
Many select patches for better security, performance and efficiency (not all listed). THERE IS "NO NEED" to tweak anything -- Just FLASH it !! But, if you desire, can further tweak many settings and available features with Synapse to suit your own habits and device capability. That is for you to find out
SUPPORTED DEVICES:
SM-N920T
SM-N920W8
RAMDISK BASE:
N920T : N920TUVU3DPG1
FEATURES:
Modified from a combo of the LATEST official Samsung source(s): Samsung OSRC
AUTO-ROOT SYSTEM-LESS SuperSU v2.76 (on flash)
KNOX WARRANTY VOID: 1
SELinux PERMISSIVE (default) or ENFORCING
DEEP SLEEP FIX
UX ROM support (beta)
Aroma Installer (set your own defaults)
Auto-Install busybox v1.24.1-Dorimanx & Sqlite3 to /system/xbin (on flash)
Compiled with Ubuntu/Linaro GCC 5.4.0 20160609 + Graphite optimizations
Linux 3.10.102
init.d script support (drop in script & set permissions to 755 or 777 and reboot)
adb insecure
stock dt.img
Secure storage = false (should prevent WIFI settings & passwords wiping on reboots)
Reduced logging
exFAT FS support
NTFS R/W support with app
CIFS support (not tested)
ISO 9660 CDROM & UDF FS support
Frandom
mount all partitions NOATIME (better performance & efficiency)
mount /data & /cache partitions LAZYTIME (better performance & efficiency)
A53 LITTLE cores increased boot frequency (faster boot)
LZO ramdisk de/compression algorithm (faster boot)
CLEANCACHE & ZCACHE
Microsoft X-BOX gamepad controller module (updated)
Slub tweaked
Invisible CPUSETs (better efficiency)
A tonne of select patches for features, better performance & efficiency
Synapse app support for many kernel configurations + much much more !!
SYNAPSE FEATURES:
Too many too list . . . Have a look through Synapse yourself. If you don't know, then read and research or leave it DEFAULT !!
About
A57 CPU frequency scaling
A57 voltage control
A53 CPU frequency scaling
A53 voltage control
CPU governor
A57 governor tunables
A53 governor tunables
Multicore
CPU stats
Boost
GPU frequency scaling
GPU voltage control
Thermal
BUS
IO
Memory
Advanced
Power Suspend
Doze
Wakelocks
Audio
Battery
LED
Screen
Network
Security
FS (file system)
CortexBrain
Crontab
USB mode
Modules
Backup & Restore profiles + EFS (auto on boot to /sdcard/SkyHigh/EFS)
Logs
Reboot
Info
CREDITS:
My family !!
Chainfire - root & SuperSU app
AndreiLux - years of support for Exynos development and his various kernel features + Synapse app and UCI code
halaszk88 - patches and some Synapse code I adapted to many of my kernels
dorimanx - BusyBox and various ramdisk tweaks/ideas
apb_axel - I adapted and used many of the Synapse controls to suit my kernels
arter97 - various source fixes/patches
ktoonsez - ktoonservative hotplug governor
YashdSaraf - BusyBox-Cleaner script
Android File Host
Samsung OSRC
and many others!
All those in my select private group that have provided constructive feedback, help, and support.
IF I'VE FORGOTTEN ANYONE, PLEASE DON'T BE SHY AND SPEAK UP, THANKS
XDA:DevDB Information
SkyHigh Kernel for N920T/W8 devices, Kernel for the T-Mobile Samsung Galaxy Note5
Contributors
UpInTheAir
Source Code: https://www.androidfilehost.com/?fid=24651442761499085
Kernel Special Features: Aroma - Synapse ++ almost everything !!
Version Information
Status: Stable
Current Stable Version: 5.6
Stable Release Date: 2016-08-02
Created 2016-07-30
Last Updated 2016-08-02
Click to expand...
Click to collapse
Glad to see you back friend only kernel I use thank you for your work
@AmbientLights
Can you please state the full firmware version of the N920W8 boot.img you sent me ?
The latest is N920W8VLS3BPF1
EDIT: You sent me N920W8VLU2BPE3 . . . this is not the latest
Been running your latest kernel for 920t running great awesome battery life thanks
Sent from my SM-N920T using XDA-Developers mobile app
UpInTheAir said:
@AmbientLights
Can you please state the full firmware version of the N920W8 boot.img you sent me ?
The latest is N920W8VLS3BPF1
EDIT: You sent me N920W8VLU2BPE3 . . . this is not the latest
Click to expand...
Click to collapse
It turns out to be the google DNS causing the problem. I forgot L Speed was applying the google dns as well. Sorry for being wasting your time. Thanks for the support ! the kernel is smooth and the battery last longer. I can send you the latest boot.img if you still want it.
AmbientLights said:
It turns out to be the google DNS causing the problem. I forgot L Speed was applying the google dns as well. Sorry for being wasting your time. Thanks for the support ! the kernel is smooth and the battery last longer. I can send you the latest boot.img if you still want it.
Click to expand...
Click to collapse
When in Aroma, please DELETE all that interfering BS init.d 'tweaks' that are not optimised for our device. Those that come with SkyHigh are !!
Don't worry about boot.img thanks.
Cone1237 said:
Been running your latest kernel for 920t running great awesome battery life thanks
Sent from my SM-N920T using XDA-Developers mobile app
Click to expand...
Click to collapse
Only 4 hours of screen time
torhect said:
Only 4 hours of screen time
Click to expand...
Click to collapse
I see your posts in various development threads. . .
From your history, seems you're never happy with anything.. .
THREE options:
1. Read and follow what's requested of YOU top of Post #3.
2. Use a different kernel
3. Use stock
Anyone using a Grace UX rom with this kernel and if so can you link me one that's working? Been wanting to try it out.
momulah said:
Anyone using a Grace UX rom with this kernel and if so can you link me one that's working? Been wanting to try it out.
Click to expand...
Click to collapse
I don't believe the T/W8 call audio issue has been solved yet for all UX beta ROMs
UN-recognised Developer of my SkyHigh Kernel v5.6.x powered SM-N920C
WETA Kernel SM-G991U/U1/0 Snapdragon only
*** This will only work on Snapdragon devices with an unlocked bootloader..
SM-G991U/U1 - SM-G9910
Telegram thread linked at bottom
See post #2 for install steps
Changelog...
R5.03
Upstreamed to 5.4.128
Enabled all tcp cong
Westwood tcp default
Disabled unneeded platforms
R5.02
Telegram thread merged into N20.S20 group, check new links.
Upstreamed to 5.4.127
all modules now inlined, no need for magisk helper module.
added wireguard
Power usage tweaks
More
R4.04
Upstreamed to 5.4.123
R4.03
Upstreamed to 5.4.122
R4.02
Upstreamed to 5.4.121
R4.01
Upstreamed to 5.4.120
R4
Testing phase complete
Upstreamed to 5.4.119
R3
Rebased off UAG source code
R2
Upstreamed to 5.4.118
Fixed Torch/Flash
R1
built using CU8 kernel source
Upstreamed to 5.4.117
Fully permissive
KNOX disabled
Wireguard
Misc debugging disabled
Kernel Downloads
Telegram thread
--------------------->
Beer fund
XDA:DevDB Information
Kernel for the Samsung Galaxy S21 Ultra
Contributors
Mentalmuso, mentalmuso
Source Code: - Kernel Source
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Created 2021-05-10
Last Updated 2020-05-10
*** Be aware, there may be a need to wipe data if you desire to go back to stock kernel, my suggestion is to backup your stock BOOT partition and DATA before flashing. This way you can return to your original setup easily. It is unknown at this stage what data is causing an issue going back to stock. If you find it, be sure to share.
* You must have bootloader unlocked and rooted your device with Magisk before flashing this kernel. Magisk is essential for camera and wacom.
* Boot times are approx 60-75sec at the moment, itll sit on the yellow triangle splash for approx 60sec and the bootanimation for 5sec.
* When flashing this kernel, an AnyKernel helper module is installed. This is a Magisk Module that is essential for the operation of Camera and Wacom. Removal of this module while running this kernel will break camera and spen.
* Kernel zip labels have either a P or E in them, P=Fully Permissive, E=Enforcing (switchable)
To install
download and flash the kernel installer zip in TWRP or any custom recovery
--->
mine2
How is it working ?
Hey, any idea if you are going to produce something similar for the exynos version (o1s)?
I have extracted the config from my exynos S21 (https://gist.github.com/wolverine2k/f647be12fbdf95ad8beec416f107772b)
What compiler you used?