Database Info

I can't pull an app from the sdcard

I just rooted the phone (I know this because I installed a screen shot app and it works) and I'm trying to copy a private app that is free off of my phone onto my computer. But, I cannot figure it out. Could someone please give me step-by-step instructions. I would really appreciate this.

It sounds like you have completed this process:
http://forum.xda-developers.com/showthread.php?t=581577
But read it and make sure you complete the last step to flash the recovery rom.
www.androidspin.com/downloads...roc-v1.2.3.img
He kind of botched the last command instead of:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
it should be:
adb shell
cd /sdcard/
su
flash_image recovery recovery-RA-heroc-v1.2.3.img
Once you make sure this is done, turn of your phone and then hold Home button and press end button. This should load the recovery, choose Nandroid Backup once you are done backing up you will want to flash Modaco's 1.1 rom. More information can be found here:
http://forum.xda-developers.com/showthread.php?t=581846
Once this is done connect your phone to your pc, and open command prompt.
type in:
cd "the directory where the sdk is" \tools
then type:
If you are using appstosd with ext2 and fat32 partitioned sdcard:
adb pull /system/sd/app app
If you are using just fat32, no appstosd:
adb pull /data/app app
this will put all your apps into a directory named app in your \tools folder on your pc.
for private apps just replace app with app-private
alternatively, you can move apps one at a time with the command:
leave out " ".
adb pull /system/sd/app/"appname" "appname"
This will place the file directly into your tools directory. Hope this helps.

Yep, thats what I did. But I didn't flash the recovery rom. If I do that will it erase all my applicastion that I have installed? I didn't want to do that because the app I want to backup was free when I downloaded it but now it's not.

Ok, so I followed all the instructions above and go the in MoDaCo rom flashed. Then, when I tried to pull the apps off the sdcard I get a permissions denied error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks.
Now I have a new problem. It says "adb: not found". Now what?
Thanks for being so helpful everyone.

adb is a command that is run outside of the shell
for example your prompt would still be at
c:\android-sdk-windows\tools>adb pull /data/app-private (location)
you can't use adb inside of adb shell

Ah, I didn't know adb had to be run outside of the shell.
Now it says there aren't any files in app-private but I know there are two in there.

HTC Legend Root & Downgrade

Hi,
I'm new here, so I don't know how to put this...
I have a HTC Legend 2.2 Froyo with HBoot 1.01 and I want to downgrade and root it so I can put CM7 on it. Can anyone tell me how to do this?
Thanks!
DM779

@DMasta779 read this ---> [GUIDE] How To Root HBOOT 1.01

i4o said:
@DMasta779 read this ---> [GUIDE] How To Root HBOOT 1.01
Click to expand...
Click to collapse
Thanks, but at the first step, where I type ''adb shell'' it
says:''adb: permission denied''.
What do I have to do?

On linux, make sure adb is executable. On windows, make sure you run cmd as an administrator

Help?
I always did it on my phone with Terminal Emulator(Temprooted). When I type in ''adb shell'' it gives ''adb: permission denied''. When I try it on my PC(Windows) With only charge and USB debugging on, adb doesn't find my phone.(This is also in fastboot mode)
It gives: ''error: device not found''. What on earth am I doing wrong?

Adb isn't executed on the phone, it's on the pc. The phone should be running normally when you run it (with usb debugging enabled)
Also install htc sync to get the correct drivers
Rehash: start the phone normally. Ensure usb debugging is enabled. Plug the gizmo into your pc. Run adb shell in the command prompt as administrator
Sent from my GT-P1000 using XDA App

http ://i55.tinypic.com/f35a2q.png
This is where I get stucked right now. Anyone?
(delete the space in the URL)
The things that've deleted, are the CID's.

DMasta779 said:
http ://i55.tinypic.com/f35a2q.png
This is where I get stucked right now. Anyone?
(delete the space in the URL)
The things that've deleted, are the CID's.
Click to expand...
Click to collapse
Adb is not a valid binary on the phone.
When you issue adb shell you're dropped in to the shell on the phone. Any commands entered there execute on the phone. Type exit to get out of the shell before executing the push commands
Sent from my GT-P1000 using XDA App

Oh OK, I see, but when I type in just ''push goldcard.img /data/local/'' after adb shell, it says: ''push: permission denied''. (running as admin in windows and temprooted phone)

Exit out of the phone's shell, them the command is
Code:
adb push goldcard.img /data/local

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think it didn't push the file completely. I get this every time when I am trying to push something.
EDIT: I did ignore it and advanced to the next steps and by this command I get stuck:
...and backup your current misc partition:
Code:
cat /dev/mtd/mtd0 > /sdcard/misc_backup.img
Click to expand...
Click to collapse
Click to expand...
Click to collapse

I can't backup/write the misc

[Q] Help donwgrade HTC flyer HC to GB

Hello everyone,
I hope you can help me in my journey to downgrade HTC P510e flyer is in HC official to turn on the GB-S to put off then install rom more stable and http://forum phone activation. xda-developers.com/showthread.php t = 1314334
My HTC flyer is in S and not be naked and Roote of any operator.
But when I downgrade to GB method according http://forum.xda-developers.com/showthread.php?t=1428104
I created a folder on my PC and put the UCP selected and android-win-tools.zip and unzipped misc_version_universal.zip tacorot.bin
If error, let me know!
How to debug USB?
When I want to run the following commands via CMD / windows: adb push tacoroot.bin / data / local / adb push misc_version / data / local / adb shell chmod 755 / data / local / tacoroot.bin adb shell chmod 755 / data / local / misc_version adb shell / data / local / tacoroot.bin - setup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
it tells me: adb is not recognized as internal or external command, operable program or batch file.
Can you tell me how to run this operation until the end.
@ + Kacaouet ...

Try adb.exe then, adb devices.
Oh and, start command line from c: promt! There are different places to begin the command line, Google itS
The above possibly won't help but, you never know
Sent from my HTC Flyer P510e using xda premium

Kacaouet said:
it tells me: adb is not recognized as internal or external command, operable program or batch file.
Can you tell me how to run this operation until the end.
@ + Kacaouet ...
Click to expand...
Click to collapse
install Android SDK if you already have it add SDK folder to system path
or just start working from adb.exe folder -open cmd.exe in this folder usually ~\android-sdk\platform-tools\ don't forget to enable usb debugging on your phone
i.e.
I installed sdk in C:\Android so output from adb devices is something like that (look at the picture)
also check in Device Manager (start/run/devmgmt.msc) if you see ADB Interface when connected if not something is wrong make sure when phone is connected you see something like that in attached pict. (if not install HTC sync to get phone drivers )
adb devices is a vital check to see if pc connection is working well don't do anything until you get output from adb !

Get fastboot and adb tool for windows here OK
Download my universal misc_version and unzip to obtain the misc_version file. OK
Download tacoroot OK
Place both the misc_version and tacoroot.bin files in the same directory as adb OK
Procedure
Check the version number for your gingerbread RUU
my example : RUU_Flyer_HTC_WWE_2.23.405.3_R_Radio_20.3501.30.08 9BU_3809.05.04.10_M_release_194964_signed.exe
Boot your flyer up to android if it's not already on, with usb debugging enabled and connect it to the PC. OK
Run the following adb commands
Code:
adb push tacoroot.bin /data/local/
adb push misc_version /data/local/
adb shell chmod 755 /data/local/tacoroot.bin
adb shell chmod 755 /data/local/misc_version
adb shell /data/local/tacoroot.bin --setup So far so good
At this point your device will reboot to recovery
Simultaneously press Volume Up, Volume Down and Power
Reboot your device
Run the following command OK
Code:
adb shell /data/local/tacoroot.bin --root
Your device will reboot, do not worry if it does not boot fully, it doesn't matter for this procedure, and it is a side effect of this root exploit.
For my part, nothing happens at this time when I made...
Run the following command:
Code:
adb shell /data/local/misc_version -s 2.23.405.3
Reboot to fastboot:
Code:
adb reboot bootloader OK
Relock the bootloader:
Code:
fastboot oem lock OK
Go back to fastboot mode ( lock causes the device to reboot )
Run your RUU The progress bar appears but stops and says "error 140"...
What shall I do to solve this problem?
May be a concern of the RUU!
How to execute the command to see if adb is well connected with flyer
If android sdk installation that I have updated to ensure proper operation?...

[Q] P3110 stuck in factory mode

I'm getting the Factory Mode is On notification on my p3110.. How do you change the mode to user? thanks!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot.. help!!
Sent from my GT-P3110 using xda app-developers app

This might help...
Hey bud, you could maybe try fetching and re-flashing local & official firmware files from here
It may bring your Tab back to its original state ready for "backup" then custom/official flash... or or or just sell it to me :laugh:

factory mode is on after an OTA update of ICS to JB, using samsung galaxy tab 2
pjdq811 said:
I'm getting the Factory Mode is On notification on my p3110.. How do you change the mode to user? thanks!
Click to expand...
Click to collapse
I am also having the same problem with you. have you found any solution to this one yet?

Tab2 10.1 stuck in the factory mode
My tab2 10.1 GT-P5113 stuck in the "factory mode" after update from ICS to JB 4.1.1 and Factory mode icon has been created on the page.
I have tried to hard reset but this screen comes always
Tell how to disable, I just want to get rid of it.

Try this -
it's needs to be typed in, in terminal (will try to find the source)
Fix:
Rooted device
Mounted /efs partition (if in recovery)
Execute the following commands:
Code:
adb shell
su
echo -n ON > /efs/imei/keystr
chown 1001:1001 /efs/imei/keystr
Reboot device
EDIT - Try looking through this too for a fix
http://forum.xda-developers.com/showthread.php?t=2125293

How to root
squ89r97 said:
Try this -
it's needs to be typed in, in terminal (will try to find the source)
Fix:
Rooted device
Mounted /efs partition (if in recovery)
Execute the following commands:
Code:
adb shell
su
echo -n ON > /efs/imei/keystr
chown 1001:1001 /efs/imei/keystr
Reboot device
EDIT - Try looking through this too for a fix
http://forum.xda-developers.com/showthread.php?t=2125293
Click to expand...
Click to collapse
I don't know how to root Samsung Galaxy Tab2 10.1 GT-P5113 (Came with ver 4.0.4), read several threads but nobody describe in detail how to do it.
Need detailed procedure how to insert these commands in shell terminal.

http://www.youtube.com/watch?v=pAvze-VNzj8
follow this.(yes its a video by me.)
then download Terminal Emulator from the play store and enter
Code:
su
echo -n ON > /efs/imei/keystr
chown 1001:1001 /efs/imei/keystr
Incase you are new and don't understand how to do that first put in the first line. (So "su")
and then press enter. then enter the second line. enter. 3rd line. enter and so on.

Stuck too
Hi guy's
I have the same problème but my P3110 is not root.
I tried to root it with CF-Auto-Root-espressowifi-espressowifixx-gtp3110 but failed
I tried the upload recovery cwm-6.0.1.1-p3110 but failed
I tried to upload the firmware P3110XXCLK7_P3110XEFCLK2_XEF but failed
Pleaaaaaase help !

Cracking android passwords

I am ultra noob, so can anyone take a look at the following link for me.
And post a detailed guide.
https://www.pentestpartners.com/security-blog/cracking-android-passwords-a-how-to/
Thanks
P.S. I need this for my own phone and not for illegal stuff.

If your phone's Android is rooted
&
If your phone can get accessed by means of ADB
then
you can open Android's SQLite database named /data/system/locksettings.db via ADB
Code:
adb devices
adb shell
mount -t auto -o rw,remount /data/system
sqlite3 /data/system/locksettings.db
and do the database query as mentioned in the article linked to.

@jwoegerbauer this is what it shows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Some things to mention.
1.My phone is locked.
2.By default it goes to USB tethering mode upon connecting to my PC(I changed the setting in DEV mode)
3. It is rooted
4. It has orange fox recovery installed
5. Again I am a noob right now (won't remain that way for too long) and need a tutorial of some kind to do this successfully.
6. I do not know SQL and so how to use it either, and for that matter Hashcat too.
The blog still remains difficult for me.
Thanks again

Line
Code:
mount -t auto -o rw,remount /data/system
should read as
Code:
mount -t auto -o rw,remount /data

Nothing

I see today is not my best day.
This should work
Code:
adb devices
adb shell
su -c 'mount -t auto -o rw,remount /data'
sqlite3 /data/system/locksettings.db

Still not working @jwoegerbauer

Is there any other way such as doing all this in recovery mode or using terminal in orange fox
or adb sidelode or something.

sa1 said:
View attachment 5307221
Click to expand...
Click to collapse
My guess is that your phone 's Android isn't properly rooted.

@jwoegerbauer what does properly rooted mean. All apps that require root works properly.
SubwayChamp said : If you are in Android 10 system can't be mounted the suggested way, you also said that device is locked but is rooted (?). Orange Fox recovery has inbuilt an add-on feature that can do that.
Here : https://forum.xda-developers.com/t/help-thread-ask-any-question-noob-friendly.2257421/post-85003273

sa1 said:
@jwoegerbauer what does properly rooted mean. All apps that require root works properly.
Click to expand...
Click to collapse
It's not interesting here whether apps that require root work or not. In your case it is only important whether SU-binary can be found by the system.
Anyway:
Some newer Android builds require the following additional ADB commands to be run first to disable Android's AVB-lock
Code:
adb root
adb disable-verity
adb reboot
adb wait-for-device
Try this. Then run commands as listed above.
FYI: I no longer participate this thread. Have a nice day.

This is what it shows