Hello guys.
Im struggeling to install a custom ROM at the stage of installing a CWM recovery. My S2 plus 9105p runs Android 4.2.2 and everytime I try to upload a recovery img via Odin everything works fine as expected but when I try to start (volume up, home, power) the recovery mode - it gets always into the standard Android one - not CWM recovery!!! It looks like Samsung has integrated some kind of security mechanism which keeps us from running custom ROMs...
I have realy tried maybe 5 different recovery images, but non of those worked for me.
Can you please help?
THX
try flashing the files used in this guide
karamancho said:
try flashing the files used in this guide
Click to expand...
Click to collapse
I tried exactly also this particular site and steps described on it, but didn't help... The same problem. Everything was OK, but recovery was not CWM but standard Android one.
When u have flashed ur recorvery, take ur battery out and then plug battery again. And now go to recorvery.
Now it is WORKING !
Hi guys.
I followed the step-by-step guide on this page:
http://forum.xda-developers.com/showthread.php?t=2560928
- used the CWM 6.0.4.5 and Odin3 0.7
- after successfull flash of the PDA with this recovery (manualy unset the auto-reboot option) I have pulled the battery out for a couple of seconds
- the battery came back in again and with home-volUP-Power I got directly to the new CWM recovery.
So thanx all for your support and you can lock this thread as everything is working now.
DETAILED STEPS FOR INSTALLING CWM RECOVERY IF THE PHONE AUTOMATICALLY RE_FLASHES IT:
Installation
WITH ODIN
1. Be sure, that your device is on 4.2.2 stock firmware and shut down the phone
2. Be sure that Samsung drivers are installed on your pc. Just install Kies or google for them
3. Download Odin 3.07(google it) and the CWM-Recovery image (in this case CWM 6.0.4.5 )
4. Open Odin as administrator
5. Start-up the phone by pressing Vol_DOWN + Home + Power so you get into the flash-menu.
6. After reading the disclaimer and warning stuff - simply press Vol_UP and plug the USB cable to the PC and Phone
7. In ODIN click on PDA and select the downloaded CWM-recovery (*filename*.tar.md5) . Check - "F. Reset Time" and UNCHECK!! -> "Auto Reboot"
8. Click start and wait until the blue progress bar in your device is graphicaly 100% (I also suggest to wait another minute to make things sure..)
9. Pull out the battery
10. Pull out the uSB cable from PC and phone
11. Wait abou 10-15 seconds and power up your phone to get into the recovery menu by pressing: Vol_UP + Home + Power
12. DONE
I sure would like to upgrade my Samsung Tablet to 4.3 or 4.4.
If anyone can provide a step by step on "how to" for CyanogenMod or other reliable roms will be greatly appreciated.
My tablet is 4.1.2 and no other customization applied or rooted.
Many thanks in advance for your help on guiding this newbie to Custom Rom world!
Jay
jnoh1611 said:
I sure would like to upgrade my Samsung Tablet to 4.3 or 4.4.
If anyone can provide a step by step on "how to" for CyanogenMod or other reliable roms will be greatly appreciated.
My tablet is 4.1.2 and no other customization applied or rooted.
Many thanks in advance for your help on guiding this newbie to Custom Rom world!
Jay
Click to expand...
Click to collapse
The term you're looking for is "flashing a rom", not "rooting a rom". Flashing a rom is not as hard as some people make it out to be, it's a fairly simple process. You'll need a computer nearby, your tablet USB cord, a recovery, and the rom you want.
-Downloading the Recovery-
You'll need to download a custom recovery before you can flash a rom. I personally use TWRP, so the steps that follow will be for TWRP:
1. Go to the official website of TWRP and download the Odin method (It should be the last download on the list) http://www.teamw.in/project/twrp2
2. If the download doesn't come with Odin, download it from here: http://odindownload.com/
3. Put your tablet into download mode by holding the Power + Volume down button.
4. Run Odin on your PC and then plug your tablet into the the USB port on your computer.
5. Load the twrp file you downloaded as a PDA and then press Start.
If you have done the steps above correctly, your tablet should reboot and nothing should change.
-Backing up your tablet-
Before you go any further, you will need to make a nandroid backup of your device. Here's the step to do that:
1. While your tablet is on, press and hold the Power + Volume Up (not down) button until you see the "Galaxy Note 10.1" boot screen.
2. You should now be in TWRP recovery. Press "backup" and then pick the location where you want to back up.
3. Start the backup and wait for a few minutes. Once completed, reboot your tablet.
You should also back up your apps using Titanium Backup or some similar app.
-Flashing the rom-
Flashing a custom rom is a very easy process. Here's how to do that:
1. Find the rom you want and download it on your tablet (or download it on your PC and move the files to your tablet)
2. Now go into recovery again (Power + Volume Up)
3. Press "Wipe"
WARNNG: The following steps will wipe your data, make sure you had back it up before proceeding or else you will lose your data!
4. Don't change any of the preset settings and begin wiping your tablet
5. Go back into the main menu of TWRP and press "Install"
6. Find the zip file of the Custom Rom and select it.
7. Press install and wait until the recovery has finish flashing the rom
8. If successful, you should be running a custom rom when you restart your tablet!
link6155 said:
The term you're looking for is "flashing a rom", not "rooting a rom". Flashing a rom is not as hard as some people make it out to be, it's a fairly simple process. You'll need a computer nearby, your tablet USB cord, a recovery, and the rom you want.
-Downloading the Recovery-
You'll need to download a custom recovery before you can flash a rom. I personally use TWRP, so the steps that follow will be for TWRP:
1. Go to the official website of TWRP and download the Odin method (It should be the last download on the list) http://www.teamw.in/project/twrp2
2. If the download doesn't come with Odin, download it from here: http://odindownload.com/
3. Put your tablet into download mode by holding the Power + Volume down button.
4. Run Odin on your PC and then plug your tablet into the the USB port on your computer.
5. Load the twrp file you downloaded as a PDA and then press Start.
If you have done the steps above correctly, your tablet should reboot and nothing should change.
-Backing up your tablet-
Before you go any further, you will need to make a nandroid backup of your device. Here's the step to do that:
1. While your tablet is on, press and hold the Power + Volume Up (not down) button until you see the "Galaxy Note 10.1" boot screen.
2. You should now be in TWRP recovery. Press "backup" and then pick the location where you want to back up.
3. Start the backup and wait for a few minutes. Once completed, reboot your tablet.
You should also back up your apps using Titanium Backup or some similar app.
-Flashing the rom-
Flashing a custom rom is a very easy process. Here's how to do that:
1. Find the rom you want and download it on your tablet (or download it on your PC and move the files to your tablet)
2. Now go into recovery again (Power + Volume Up)
3. Press "Wipe"
WARNNG: The following steps will wipe your data, make sure you had back it up before proceeding or else you will lose your data!
4. Don't change any of the preset settings and begin wiping your tablet
5. Go back into the main menu of TWRP and press "Install"
6. Find the zip file of the Custom Rom and select it.
7. Press install and wait until the recovery has finish flashing the rom
8. If successful, you should be running a custom rom when you restart your tablet!
Click to expand...
Click to collapse
I think he needs Root too... other than that, great write up!
link6155 and lilbluemirage ,
I thank you both for the 1. great step by step instruction. 2. Understanding the need of a Newbie who has no idea how to ask proper question!
Since I heard that Sammy is going to release long-waited 4.4 update (After I posted the question), I decided to wait a bit longer before I go through with flashing by following your kind instruction. I still am not sure whether I should root before flashing it or after, though. Anyway, I will come back if Sammy fail me (sigh) and will definitely follow your guidance.
Thanks again and Have a wonderful day!
please help me
i dont know wat is version of my cwm
But it shows only six options that are as listed below:
1. Reboot
2. Apply update from ADB
3. Apply update from SDCARD
4. wipe data/factory reset
5. wipe cache partition
6. apply update from cache
when i try third option i.e. Apply update from SDCARD, it gives an error msg unknown volume for path
please help me, i want to install lollipop os on my phone or atleast kitkat rom, but not able to install
please kindly help :crying:
model no. GT-I8552
Samsung galaxy grand Quattro
Hmmm...
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.
How???
janekmuric said:
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.
Click to expand...
Click to collapse
the question arises how???
please tell procedure for flashing another version of cwm
CWM
jaskeerat11 said:
the question arises how???
please tell procedure for flashing another version of cwm
Click to expand...
Click to collapse
YOU ARE DOING EVERYHING ON YOUR OWN RISK.
I DID NOT TEST THIS.
Download Samsung drivers here: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-USB-Driver-for-Mobile-Phones-15270.shtml
Download odin: http://d-h.st/er8
The CWM revovery itself: http://d-h.st/0Fw
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and go to Recovery Mode (Volume UP And Home And Power Button all
together and when it vibrates release Power Button but keep pressing left ones).
If you don't see Developer options go to Stettings>About phone> press Build version 10 times quickly
I dont know. problem?
Howdy I have a older AT&T Galaxy Tab 2 10.1 GT-P5113 SGH-i497 Android 4.2.2
I followed the steps on forum thread Samsung Galaxy Tab 2 Development -->(ODIN + CWM 6 + ROOT + Stock) ATT / TMOBILE Galaxy Tab 2 10.1 {} {SGH-T779} by Childofthehorn
Well I made it through step 5, at least! (Odin displays green “Passed!”)
But the following steps:
6. Backup your existing image
7. Flash SuperSu from SDcard
8. WInning.
here's where I'm at:
(see attached)
strangely there is no button for attachment on the Editor Are attachments allowed on this forum? Peculiar!
Only choices on the Recovery screen are
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Don't know how to "back up your existing image"
or "Flash SuperSU from SDcard."
(but I do have the SuperSU apk on the SDcard though; do I select "apply update from external storage"?)
How do I know I have root? Odin said "Passed!" in green, but I'm not sure what that entails. -- I don't want to use any of those root checkers on Google Play because they all appear to ad-filled junk.*
Do I have CWM 6 by this process? How can I tell?
Is it possible to upgrade to KitKat? or is the P5113's processor not capable of it (or something else prevents having KitKat)
Not sure what I should do next.
Thanks everyone!
After Odin says Passed did you let the tab reboot to the ROM? If so the ROM probably replaced CWM with stock recovery (stock ROMs tend to do this), so what you need to do is flash the recovery again via Odin, but once it completes immediately reboot to recovery using the key combination, do not let the ROM boot. Once the recovery has loaded it should automatically disable the recovery replacement system in the ROM, and you'll be able to proceed to step 6.
putr4s said:
After Odin says Passed did you let the tab reboot to the ROM? If so the ROM probably replaced CWM with stock recovery (stock ROMs tend to do this), so what you need to do is flash the recovery again via Odin, but once it completes immediately reboot to recovery using the key combination, do not let the ROM boot. Once the recovery has loaded it should automatically disable the recovery replacement system in the ROM, and you'll be able to proceed to step 6.
Click to expand...
Click to collapse
Do you uncheck Auto Reboot and F. Reset Time? With those enabled all Odin said was Reset! in blue.
For the 3rd step:
Childofthehorn says:
3. Open Odin (as administrator) and hit the "PDA" button, remember to uncheck the reset
I assume he means F. Rest Time in the Odin options tab
Seems to reboot immediately after Odin finishes, happens too fast; there's no time to reboot into recovery mode with the power+vol.
Cabbagestack said:
Seems to reboot immediately after Odin finishes, happens too fast; there's no time to reboot into recovery mode with the power+vol.
Click to expand...
Click to collapse
Just follow what the instructions said, but uncheck Auto Reboot. Then, once Odin is done, force reboot the tab by holding both power and vol button down for about 10 secs (until it reboots), then release the power button while still holding the vol button.
Hey everyone.
I have recently rooted and installed the Pixel experience 9 custom ROM on my S7 edge.
Even though I am confident in Installing ROMs and using TWRP I always like to have a check on the net to see the best way of doing stuff. When checking I found that there were so many different guides that the process became more confusing than it needed to be and it caused issues when I was trying install the ROM.
So I have decided to write out a guide to help everyone in the future.
Note. I am in UK using a Exynos version of the S7 edge. I believe there is a complication with the USA Snapdragon version.
Also this is done at your own risk and I am not responsible for any damage, errors or bricked devices. This will also void the warranty of your device.
What will you need
1. A computer with a SD card slot (if you don't have a slot you can usb a usb adaptor)
2. The latest version of ODIN
3. Your chosen ROM zip
4. Magisk Root zip
5. The correct TWRP file for your S7 or S7 edge
6.The latest version of your Stock firmware (this is in case something goes wrong)
7. A spare micro SD card with SD card adaptor
8. Micro USB cable (charging cable usually does the job)
9. Samsung Device drivers
This guide will be split in to 4 parts with some additional notes at the end.
Part 1- on your PC
Part 2- on your mobile
Part 3- In ODIN mode
Part 4- In TWRP
On your PC
1. Download and install the latest version of ODIN to your PC. https://samsungodin.com/
2. Download and install the Samsung Device drivers.
3. Download the correct TWRP version for your phone. https://twrp.me/
4. Now Download your root file, I used to Magisk root but there is super SU as well. I was told that Super SU is dated compared to Magisk.
https://www.xda-developers.com/magisk-v17-1-android-pie-a-b-support/
5. Now download your chosen ROM. There is lots of different ROMs for the S7 and S7 edge. In my case I decided to go with Pixel experience 9, it's basically a Pixel 3 ROM that runs Android P but it's up to you.
6. Go to Sammobile and download the stock Firmware for your device. The download takes ages so I would just leave this download in the background and continue to the next step (You shouldn't need this file but you will need it something goes wrong)
https://www.sammobile.com/firmwares/
7. Put your micro SD into your adaptor then insert into your PC into your SD card slot, then copy the ROM Download and the Root download SD card to the card.
8. Open ODIN and put the TWRP file on the AP section, then uncheck re-partition.
On Your Phone.
1. Before plugging up to the PC there are something to do first. The first thing to do is enter developer options by taping build number 7 times. Then check USB debugging and then check OEM unlocking.
2. Back up your data with Samsung backup and Google backup, both found in the settings.
3. If you already have a SD card inside your phone remove it and put it somewhere safe.
4. Power off your device and Boot in to ODIN mode (volume down, home button and power at the sametime)
In ODIN mode (READ THIS CAREFULLY)
1. BEFORE pressing start on your computer, hold volume up and home button.
2. Now press start on the computer, keep your fingers on the volume button up button and home button. Let the PC and Phone start it's process.
3. The moment the phone screen goes black. Press and hold the power but while keeping your fingers on the volume up and home button.
4. Keep all the buttons held down (volume up, home button and power button) till you see the TWRP screen boot.
In TWRP.
1. Once TWRP boots you will see a screen it will say "swipe to allow modifications" DON'T swipe just press "read only"
2. Press wipe and then press format data. Once the wipe is complete DO NOT swipe to reboot. (You will get yourself stuck in a boot loop) press the TWRP home icon instead.
3. Press Reboot then press recovery this will complete the installation of TWRP (if you press anything else you will get stuck in a boot loop)
4. Allow TWRP to reboot. You will be presented with the "swipe allow modifications" check the do not show again box and swipe.
5. Now insert your Micro SD card with the downloaded files.
6. Press wipe, then press advanced and check cashe and
dalvik cashe. Then Press TWRP Home icon
7. Press install and navigate to SD card. Then press the on the Magisk file and swipe, allow the process to finish and press wipe cache and Dalvik cashe.
8. Press TWRP home icon and press install and navigate back to SD card. Then press your ROM file and swipe again. Once it's finished press wipe cashe and Dalvik cashe. Then swipe to reboot.
9. Re-insert your memo card you were using before. (Not the one with the downloads on, the one with your photos and music and stuff)
10. BOOM your done. Happy days with your new ROM.
Few last things
the ROM I installed had G-apps preinstalled with the ROM, but if your ROM has no G-apps then once you booted, download G-apps from your ROMs browser and flash them with TWRP.
If you get stuck in a boot loop use your stock firmware file and Odin to reinstall the stock firmware and try the whole process again.
This method uses SD card to install the files in TWRP but I believe you can just copy the files via your PC directly to your phone at point 5 in the TWRP part of the guide. I had a spare card so I used a card.
The principal of this guide can be applied to other Samsung devices but newer device then the S7 and S7 edge have more factors to take note of, so some research will be required.
Remember
this is done at your own risk and I am not responsible for any damage, errors or bricked devices. This will also void the warranty of your device.
Hope this guide works well for you.
Is the "no verty" not required to remove encryption?
ctbale said:
Is the "no verty" not required to remove encryption?
Click to expand...
Click to collapse
I don't think this was a big issue with S7E but I know the S8 and onwards have extra encryption protection and 24 hour jailbait locks.
I have rooted my S7E a few times and it's never been an issue for me.
Sometimes the USA Snapdragon versions have extra encryption as well.
Thanks for reply.
In a few days I will try to root.
Fingers Crossed!
( I do have the Exynos S7 Edge G935F)
Also have a newer stock Oreo 8.0.0, unrooted. Thats the part I hear is giving people problems. Something about after flashing TWRP you get a fail to mount the data partition .... or something like that. Something to do with quotas
Heimdell vs odin
I wonder why most people use odin.
The official lineage OS installation instruction recommends heimdell. https://wiki.lineageos.org/devices/hero2lte/install
So what is the difference ? Heimdell vs odin
ZionMainframe said:
I wonder why most people use odin.
The official lineage OS installation instruction recommends heimdell. https://wiki.lineageos.org/devices/hero2lte/install
So what is the difference ? Heimdell vs odin
Click to expand...
Click to collapse
ODIN is made by Samsung developers and Hiemdell is a 3rd party option. They both do the same thing but some say that Heimdell is safer, easier and faster.
Personally I use Odin because I have got used to it and it has never let me down.
I mostly use it to install Stock UK firmware on cheaper Samsung phones that are from overseas.
Hello,
Thanks for your guide but I think there are too much steps, you can do it easier.
You can keep your sd card in the phone to transfer the ROM and magisk.
You can uncheck reboot in Odin instead doing this hard combination of "keep pressing volume up and power + press start on your computer at the same time", or let reboot checked, pressing start and keep pressing power+home+volume up when the screen turning off.
Even if you're in a bootloop, you can go back in recovery by forcing the phone to reboot (power+home+volume down) and when you see the Samsung logo (splahscreen) you keep pressing power+home+volume up until you see twrp screen appears.
Sorry men, it's not against you or your guide but to help beginners, we are always scared when we see a long and complicate list of steps, especially when we don't know.
But it's nice to share the links of the necessary tools to avoid searching everywhere :good:
And don't worry guys, if you do something wrong you can easily restore the stock firmware, it's very hard to brick a Samsung device, just be sure to get the last version of TWRP for the good model and the ROM corresponding to this model too.
I flashed my S7Edge the day I bought it without stress, take your time, read the tutorials and try to understand what you are going to do before doing it and all will be fine.
The simple version (IDK if it's better) is :
1 : Install Samsung drivers
2 : Copy ROM + magisk + noverity zips on sdcard
3 : Go into download mode (Power off phone and keep pressing power+home+volume down until the blue screen and follow the steps on the screen)
4 : Open Odin (last version), connect your phone to the computer, uncheck reboot box and flash TWRP on AP case
5 : Reboot on TWRP (keep pressing power+home+volume down until you see Samsung logo, and directly keep pressing power+home+volume up until you see TWRP screen)
6 : Wipe everything except sdcard + format data + (optionally) flash noverity zip
7 : Flash the ROM
8 : Reboot to system, configure the rom and wait some minutes to let the ROM create dalvik cache.
9 : Reboot normally and wait some minutes.
10 : Reboot to TWRP
11 : Flash Magisk zip (IMPORTANT ! Don't Flash Magisk just after the ROM, first boot on the ROM without root and reboot one time at least before to avoid lags in the system due to dalvik cache ! Steps 7 and 8)
12 : Reboot to system and install magisk manager apk
13 : I'm not superstitious but there is not step 13, you are done, enjoy !
Don't forget, don't flash Magisk directly after the ROM or you'll get a laggy ROM.
Just boot without flashing magisk and let the ROM doing his work in background during some minutes (5 to 10 minutes should be good), and do another reboot.
After that you can flash Magisk.
Use links shared by the creator of this topic, they are the officials. :victory:
psylooooo said:
Hello,
Thanks for your guide but I think there are too much steps, you can do it easier.
You can keep your sd card in the phone to transfer the ROM and magisk.
You can uncheck reboot in Odin instead doing this hard combination of "keep pressing volume up and power + press start on your computer at the same time", or let reboot checked, pressing start and keep pressing power+home+volume up when the screen turning off.
Even if you're in a bootloop, you can go back in recovery by forcing the phone to reboot (power+home+volume down) and when you see the Samsung logo (splahscreen) you keep pressing power+home+volume up until you see twrp screen appears.
Sorry men, it's not against you or your guide but to help beginners, we are always scared when we see a long and complicate list of steps, especially when we don't know.
But it's nice to share the links of the necessary tools to avoid searching everywhere :good:
And don't worry guys, if you do something wrong you can easily restore the stock firmware, it's very hard to brick a Samsung device, just be sure to get the last version of TWRP for the good model and the ROM corresponding to this model too.
I flashed my S7Edge the day I bought it without stress, take your time, read the tutorials and try to understand what you are going to do before doing it and all will be fine.
The simple version (IDK if it's better) is :
1 : Install Samsung drivers
2 : Copy ROM + magisk + noverity zips on sdcard
3 : Go into download mode (Power off phone and keep pressing power+home+volume down until the blue screen and follow the steps on the screen)
4 : Open Odin (last version), connect your phone to the computer, uncheck reboot box and flash TWRP on AP case
5 : Reboot on TWRP (keep pressing power+home+volume down until you see Samsung logo, and directly keep pressing power+home+volume up until you see TWRP screen)
6 : Wipe everything except sdcard + format data + (optionally) flash noverity zip
7 : Flash the ROM
8 : Reboot to system, configure the rom and wait some minutes to let the ROM create dalvik cache.
9 : Reboot normally and wait some minutes.
10 : Reboot to TWRP
11 : Flash Magisk zip (IMPORTANT ! Don't Flash Magisk just after the ROM, first boot on the ROM without root and reboot one time at least before to avoid lags in the system due to dalvik cache ! Steps 7 and 8)
12 : Reboot to system and install magisk manager apk
13 : I'm not superstitious but there is not step 13, you are done, enjoy !
Don't forget, don't flash Magisk directly after the ROM or you'll get a laggy ROM.
Just boot without flashing magisk and let the ROM doing his work in background during some minutes (5 to 10 minutes should be good), and do another reboot.
After that you can flash Magisk.
Use links shared by the creator of this topic, they are the officials. :victory:
Click to expand...
Click to collapse
Cheers for helping my out, my guide has a lot of steps as I literally wrote what I did every step.
I was going for a guide that spelt out every single detail for the less experienced people. I glad to see you approve of my links.
Great guide though, great that both guides can complement each others.
Owenboy89 said:
Cheers for helping my out, my guide has a lot of steps as I literally wrote what I did every step.
I was going for a guide that spelt out every single detail for the less experienced people. I glad to see you approve of my links.
Great guide though, great that both guides can complement each others.
Click to expand...
Click to collapse
You are right ! And your guide is more complete than mine, I don't talk about going into developers options to enable oem unlock etc, I wrote this too fast and too late :laugh:
Does this process work for latest March 1 2019 security patch?
Build number is G935FXXS4ESC6.
Thanks!
stenoo said:
Does this process work for latest March 1 2019 security patch?
Build number is G935FXXS4ESC6.
Thanks!
Click to expand...
Click to collapse
It does work
https://www.mediafire.com/folder/ka5kcad3w7awo/S7+
Hey are you sure it doesn't work for snapdragon?
SULkiller said:
Hey are you sure it doesn't work for snapdragon?
Click to expand...
Click to collapse
You can use this method for Snapdragon, but Snapdragon phones in certain regions have a built jailbreak that can complicate things. There are ways around it but as I am in a region that sell exynos then i have no experience with the Snapdragon Variant. ?
hey when i try flash galaxy s7edge sm-g935f with twrp when i go into recovery it red screen what am i doing wrong cheers inadvance
3 time flashing stock grrrrrrrrr
1337-oxide said:
hey when i try flash galaxy s7edge sm-g935f with twrp when i go into recovery it red screen what am i doing wrong cheers inadvance
3 time flashing stock grrrrrrrrr
Click to expand...
Click to collapse
When you booted into recovery the for the first time after installing it, did you wipe all your data??
Then go into reset and pressed reset to recovery???
Owenboy89 said:
When you booted into recovery the for the first time after installing it, did you wipe all your data??
Then go into reset and pressed reset to recovery???
Click to expand...
Click to collapse
i got twrp and root know ressuruction remix giving me error 7 i think what does that mean
cheers
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
sorry but know i lost twrp what am i doing wrong SM-G935F s7edge
is anyone going to help me or u just like the other sites dont reply i need this info asap its only reason i rooted was to use custom rom oh also turmux
Hey
Sorry I have been busy.
Best option is to flash the firmware and start again. Follow the steps of original comment.
Remember when you boot in to TWRP straight after installing it...then wipe all your data then press reboot and reboot back into RECOVERY....once your done this you have completed the install of TWRP.
Once that is all done....wipe your cashe davalik data and then insert your memory card with the custom Rom and Magisk root inside. Install Magisk first...then the ROM.
Once this is done wipe cashe/davalik data once more and reboot, your custom ROM should load up...once the ROM loads install the Magisk root manager and latest update for the root.
Other things to check have you installed the correct TWRP and correct custom Rom for your device.
Also check your customs ROM feed on XDA to see if anyone has issued like this on there as well, if so there might be specific answer to your issue there.
Hope this helps sorry for the delay
How can you switch back to root version of rom for Samsung Galaxy S7 Edge
You can install original ROM / firmware of Samsung Galaxy S7 Edge follow these simple steps :
1. Download and install the latest SamsungOdin 3 software
2. Now download ROM of S7 edge from sammobile.com .
3. Switch off your phone and connect your phone with PC using data cable.
4. Press Power+Vol down and home key together.
5. Now select recovery from your phone boost setup.
6. Open the Odin and select your phone and browse the ROM file.
7. Now press install ROM. Almost done!
8. Wait to complete installation it may take 10 - 15 minutes.
9. Enjoy!
psylooooo said:
Hello,
Thanks for your guide but I think there are too much steps, you can do it easier.
You can keep your sd card in the phone to transfer the ROM and magisk.
You can uncheck reboot in Odin instead doing this hard combination of "keep pressing volume up and power + press start on your computer at the same time", or let reboot checked, pressing start and keep pressing power+home+volume up when the screen turning off.
Even if you're in a bootloop, you can go back in recovery by forcing the phone to reboot (power+home+volume down) and when you see the Samsung logo (splahscreen) you keep pressing power+home+volume up until you see twrp screen appears.
Sorry men, it's not against you or your guide but to help beginners, we are always scared when we see a long and complicate list of steps, especially when we don't know.
But it's nice to share the links of the necessary tools to avoid searching everywhere :good:
And don't worry guys, if you do something wrong you can easily restore the stock firmware, it's very hard to brick a Samsung device, just be sure to get the last version of TWRP for the good model and the ROM corresponding to this model too.
I flashed my S7Edge the day I bought it without stress, take your time, read the tutorials and try to understand what you are going to do before doing it and all will be fine.
The simple version (IDK if it's better) is :
1 : Install Samsung drivers
2 : Copy ROM + magisk + noverity zips on sdcard
3 : Go into download mode (Power off phone and keep pressing power+home+volume down until the blue screen and follow the steps on the screen)
4 : Open Odin (last version), connect your phone to the computer, uncheck reboot box and flash TWRP on AP case
5 : Reboot on TWRP (keep pressing power+home+volume down until you see Samsung logo, and directly keep pressing power+home+volume up until you see TWRP screen)
6 : Wipe everything except sdcard + format data + (optionally) flash noverity zip
7 : Flash the ROM
8 : Reboot to system, configure the rom and wait some minutes to let the ROM create dalvik cache.
9 : Reboot normally and wait some minutes.
10 : Reboot to TWRP
11 : Flash Magisk zip (IMPORTANT ! Don't Flash Magisk just after the ROM, first boot on the ROM without root and reboot one time at least before to avoid lags in the system due to dalvik cache ! Steps 7 and 8)
12 : Reboot to system and install magisk manager apk
13 : I'm not superstitious but there is not step 13, you are done, enjoy !
Don't forget, don't flash Magisk directly after the ROM or you'll get a laggy ROM.
Just boot without flashing magisk and let the ROM doing his work in background during some minutes (5 to 10 minutes should be good), and do another reboot.
After that you can flash Magisk.
Use links shared by the creator of this topic, they are the officials. :victory:
Click to expand...
Click to collapse
Your certainly not wrong there. confusing isn't the word I would choose more like frustrating to hell. I'm new to this and I can't even get out the starting gate lol every time I move one step forward I move two steps back and that's no joke.
I can't read any more tutorials there coming out my ears it's just adding to the confusion I'm completely lost now. can't even pick a custom rom that's a headache for another time I was just wanting to root the phone but was told stock roms are temperamental and custom roms was the way forward. all I keep reading is tutorials telling you to down load files but never a mentioning once if they should be in zip format as downloaded or unpacked? then providing links to other files taht are in apk file! like Magisk. but continue to about the file as though it were a zip! as noob it's frustrating to keep asking for help and every key stroke at least for me anyway you feel like a pain in the rear! so for now I'm throwing in the towel at least I know one thing that works. giving up lol.