I have Htc sensation 4G with T-mobile locked. I have unlocked bootloader with Htc.com/dev.
But Somehow I have corrupted android GB on it while trying solution from here.
http://forum.xda-developers.com/showthread.php?t=1614617
I have tried installing rmk-pyramid-stock_ics_3.32.401.3-v1.zip ( mentioned in above link) with help of 4ext recovery but it is not booting I wiped/formatted each partition. . Every software try to boot in android mode which I don't on my device.
Hboot is 1.18.000
I am a noob in this field. I would be thankful if you help me.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.531.1
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4041mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Did you flash the boot.img after installing the rom?
Sajito said:
Did you flash the boot.img after installing the rom?
Click to expand...
Click to collapse
Yes, I did with boot.img extreacting from rmk-pyramid-stock_ics_3.32.401.3-v1.zip.I have tried many times. I have also tried jhboot.img, PG58DIAG.img,nbh of 3.12 & 3.33.
My phone is s-on.
rht125 said:
Yes, I did with boot.img extreacting from rmk-pyramid-stock_ics_3.32.401.3-v1.zip.I have tried many times. I have also tried jhboot.img, PG58DIAG.img,nbh of 3.12 & 3.33.
My phone is s-on.
Click to expand...
Click to collapse
the ics rom won't boot with gingerbread firmware
flash this rom from recovery
http://www.4shared.com/zip/NVqsJkGIba/2084011_stock_rooted_signed-FI.html (GB rom)
before flashing the rom:
format all partitions except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
done
after that use this method for S-OFF
http://revolutionary.io/
This update is wonderful. but revolutionary is just taking time & running for hours on both linux & windows..
Zerging root.. this might take a min. or so...
rht125 said:
This update is wonderful. but revolutionary is just taking time & running for hours on both linux & windows..
Zerging root.. this might take a min. or so...
Click to expand...
Click to collapse
i never used revolutionary method i don't know what to suggest
just keep trying
Hi I got S-off using http://unlimited.io/juopunutbear.htm & above mentuined link. but my network sim is stll blocked. It is still asking code.
Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.2008
(bootloader) version-baseband: 10.14.9035.01_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.24.401.1
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3f6ba3d6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I have upgrade firmware to 3.33 & installed rmk-pyramid-stock_ics_3.32.401.3-v1.zip successfully.
It is s-off but still network locked. Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
rht125 said:
I have upgrade firmware to 3.33 & installed rmk-pyramid-stock_ics_3.32.401.3-v1.zip successfully.
It is s-off but still network locked. Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
To get sim unlock you need to follow this guide http://forum.xda-developers.com/showthread.php?t=1232107.
I don't know how it's handled in your country, but in germany after 2 years you can let the provider remove sim lock for free, maybe you could try that too.
Both method don't work..
In adb shell method ( the command "strings -n 8 /dev/block/mmcblk0p6") in Windows
Pls see attachment, Why T-MOB010 is written above IMEI ? ( last 3-4 lines )
Strangely , my htc got sim unlocked itself.
I put a cdma sim in it. Android start updating & showed no network. Then I put my gsm sim & it started working.
Prior to this, my htc was synced with htc sync on windows.
Thanks to all.
I have been researching through a lot of threads for a few days and I have found out that I have a very much outdated firmware for my phone. So, through this researching many threads mention that this firmware M8SD_416.401.10_Modified_WWE_Euro.zip could be a possible solution for my problem. the specs of my phone are as follows:
c:\mini-sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.12.600.20
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0a41237a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
My question here is if I update this firmware will I have any radio, wifi or any issues on my phone?
The reason is that I want to install a custom ROM such as Skydragon or ViperOne Rom based on Lollipop and Sense 7.
Currently I am in Mexico with stock ROM 4.4.2 Kitkat and my carrier is Telcel.
I know I have to be u/l bootloader, be rooted and S-OFF.
Any help would be greatly appreciated.
Hello, I currently have a HTC One M8 and have used sunshine to unlock and s-off, also have used rootking to get the phone rooted and root has been verified with rootchecker. I am new to the whole process of rooting and flashing. I have fastboot setup. I am looking for a good new user friendly rom that is battery efficient. I was looking into getting a venom rom but was told I would need a RUU. Any suggestions on the route I need to go? I am currently on the stock rom and had put the supersu app on my phone but am getting a message that says I need to update my surpersu binaries.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.605.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ********
(bootloader) imei: *********
(bootloader) imei2: Not Support
(bootloader) meid: **********
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B2000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 66da6304
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done
Hi!
I have HTC One M8 Sprint Version accidentally i wipe the system using TWRP without making its nandroid backup.
Now by turrnig on its goes into boot-loader and and shows OS blank.
I googled its nandroid backup but didn't find, then i download RUU Firmware [all version].exe but didn't worked, I also try custom ROM but after flashing successful the result is same
Now what to do!
I have ;
TWRP v2.7.0.2
getvar detail
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: XXXXXXXXXXXXX
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8a0f02ff
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Wrong forum section. You already posted in the M8 device section, which is a better place for this type of question.
The phone had a problem closing applications so I installed the software. I have installed the RUU:
PN07IMG_M7_UL_L50_SENSE60_MR_Globalive_WWE_7.17.1500.8_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421062_signed.zip
After this has started well and without any error but my surprise is that it has the modified imei. Does not match the one on the label. I understand that should be corrected with the installation again with a stock but I do not know what to install according to your specifications because I do not get another. I would greatly appreciate the help you could give me. Thank you
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.1500.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: MB411W904423
(bootloader) imei: 3570xxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4011mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-eff4f609
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0