Hi to alll members
I need help or sp flash tool,When i try to flash my TELSDA T6183 , an error messege appearse it tells :
EBOOT ERROR : (16008)
[Android] Partition size changed!
[Hint]:
Partion image donwload error.
The Following partition must be down FULL downloaded all together.
i add a screenshot at the end to help you guys , Thank you for your helps and your attentions.
spetsnaz2016 said:
Hi to alll members
I need help or sp flash tool,When i try to flash my TELSDA T6183 , an error messege appearse it tells :
EBOOT ERROR : (16008)
[Android] Partition size changed!
[Hint]:
Partion image donwload error.
The Following partition must be down FULL downloaded all together.
i add a screenshot at the end to help you guys , Thank you for your helps and your attentions.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please consider asking the experts in our development and hacking section here:
http://forum.xda-developers.com/android/help
Good luck!
Thank you sir i thought that the xda assit was like general forum, i didn't know that it was specific sectiosn for tools ,thank you very much .
Related
I have intex aqua i5 and i have downloaded its stock rom from your site.
and followed the steps that were given by your developers!
i'm using SP Flash tool to install rom. When i click on MT6589_Android_scatter_emmc, it says image UBOOT checksum failed!!
how can i fix this problem? need your guidance to fix it!
hope you understood my problem and will help me!
Email me with the solution- [email protected]
thankyou!
XDA Visitor said:
I have intex aqua i5 and i have downloaded its stock rom from your site.
and followed the steps that were given by your developers!
i'm using SP Flash tool to install rom. When i click on MT6589_Android_scatter_emmc, it says image UBOOT checksum failed!!
how can i fix this problem? need your guidance to fix it!
hope you understood my problem and will help me!
Email me with the solution- [email protected]
thankyou!
Click to expand...
Click to collapse
Hello, and welcome to XDA! There is a thread where you could try and ask your question: http://forum.xda-developers.com/showthread.php?t=1982587. You will need to register to post there.
Good luck!
XDA Visitor said:
I have intex aqua i5 and i have downloaded its stock rom from your site.
and followed the steps that were given by your developers!
i'm using SP Flash tool to install rom. When i click on MT6589_Android_scatter_emmc, it says image UBOOT checksum failed!!
how can i fix this problem? need your guidance to fix it!
hope you understood my problem and will help me!
Email me with the solution- [email protected]
thankyou!
Click to expand...
Click to collapse
Need delete from rom folder,checksum files ,after working.I tested now.
GUYS PLEASE HELP !! I unlocked my bootloader using fast boot and It showed success then when I turned on my phone it was stuck on xperia waves . Then I read it on many of the threads to flash the stock rom using flash tool to repair the problem but the flash tool showing
04/033/2015 14:33:37 - INFO - Selected Bundle for Sony Xperia M (C1905). FW release : 15.4.A.1.9. Customization : CE
04/033/2015 14:33:37 - INFO - Preparing files for flashing
04/033/2015 14:33:37 - ERROR - invalid LOC header (bad signature)
04/033/2015 14:33:37 - INFO - Cannot open bundle. Flash operation canceled
im not getting what to do please help me revive my phone .
Hi, thank you for using XDA Assist. Try asking here, http://forum.xda-developers.com/xperia-m They are the experts on your device. Also see this, http://forum.xda-developers.com/showthread.php?t=2484622
Dit it by myslef .. Still thanks.
jd1639 said:
Hi, thank you for using XDA Assist. Try asking here, http://forum.xda-developers.com/xperia-m They are the experts on your device. Also see this, http://forum.xda-developers.com/showthread.php?t=2484622
Click to expand...
Click to collapse
Thanks but solved it by flashing rom from other source and keeping in mind of my model that was C1904 and the loc header vanished.
Great! Glad you got it fixed. I'll close this thread.
I bricked my E-tel Curiosity i2 smartphone.....
Help to make it working .....:crying::crying:
I need its firmware if any of you have that phone,please hard backup it and upload as a downloadable zip file for me please.....
Thanks in advance.....
Chipset:Mediatek MT6572
Please help me.....
I haven't its firmware and when I try to flash similar one,the error 5054 getting dram setting fail says.....
hishara99 said:
I bricked my E-tel Curiosity i2 smartphone.....
Help to make it working .....:crying::crying:
I need its firmware if any of you have that phone,please hard backup it and upload as a downloadable zip file for me please.....
Thanks in advance.....
Chipset:Mediatek MT6572
Please help me.....
I haven't its firmware and when I try to flash similar one,the error 5054 getting dram setting fail says.....
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.
I have a lenovo A328 stock in boot loop and i cannot fix it using flash because all the stock rom that i downloaded was all corrupted file cause when i extract it it said that file error / file corrupted specially the system.img,, can u give me a complete and not corrupted zip file stock rom of lenovo A328? can anyone help me/.. thanks in advance
AG143 said:
I have a lenovo A328 stock in boot loop and i cannot fix it using flash because all the stock rom that i downloaded was all corrupted file cause when i extract it it said that file error / file corrupted specially the system.img,, can u give me a complete and not corrupted zip file stock rom of lenovo A328? can anyone help me/.. thanks in advance
Click to expand...
Click to collapse
Hi AG143
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards.
.
Hello Everybody!
I've got a new phone HUAWEI Y5II (CUN L22) i decided to root it with Kingroot and it was working great! only problem : the SU binary impossible to update... its why i start to dig more...
After that i decide to install a rom custom but now i have those problems :
- imposible to restart in recovery mode no better using the volume and power button or through rom manager "restart recovery mode"
- So i try to hard reset it with the settings option, its running but when it start again nothing have change!
fo trying to give you all informations :
- with rom manger : says that my recovery is TWRP...
- with flashify app i flashed the recovery img Philz...
I'm aware i did too many stuff on this! i think i created i big mess!!
But if someone have a solution for make a clean restart.... it will be sooo great!! thanks
Hélène
PS : i just found this webpage with 3 options.... the 1 and 2 doesnt work for me ...should i try the 3rd one ? Ok...i can't post a link because i'm a newbie....the website is W.... hardreset.org
all specifications :
Model : HUAWEY CUN-L22
Build N° : CUN-L22C567B124
Band : MOLY.LR9.W1444.MD.LWTG.MP.V42.P1
Kernel : 3.10.65+ [email protected]#1
EMUI 3.1
ANdroid 5.1
LNFOLK69 said:
Hello Everybody!
I've got a new phone HUAWEI Y5II (CUN L22) i decided to root it with Kingroot and it was working great! only problem : the SU binary impossible to update... its why i start to dig more...
After that i decide to install a rom custom but now i have those problems :
- imposible to restart in recovery mode no better using the volume and power button or through rom manager "restart recovery mode"
- So i try to hard reset it with the settings option, its running but when it start again nothing have change!
fo trying to give you all informations :
- with rom manger : says that my recovery is TWRP...
- with flashify app i flashed the recovery img Philz...
I'm aware i did too many stuff on this! i think i created i big mess!!
But if someone have a solution for make a clean restart.... it will be sooo great!! thanks
Hélène
PS : i just found this webpage with 3 options.... the 1 and 2 doesnt work for me ...should i try the 3rd one ? Ok...i can't post a link because i'm a newbie....the website is W.... hardreset.org
all specifications :
Model : HUAWEY CUN-L22
Build N° : CUN-L22C567B124
Band : MOLY.LR9.W1444.MD.LWTG.MP.V42.P1
Kernel : 3.10.65+ [email protected]#1
EMUI 3.1
ANdroid 5.1
Click to expand...
Click to collapse
Greetings and welcome to assist. I found this thread which contains everything about your device, if you ask your question there the experts will be able to help you
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. I found this thread which contains everything about your device, if you ask your question there the experts will be able to help you
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Hey!
I'm sorry i'm not sure to understand what you suggest...sorry i'm a newbie here....
You said there is another thread about my device....but i don't see link to this.... or i'm totally lost...!
Hélène
LNFOLK69 said:
Hey!
I'm sorry i'm not sure to understand what you suggest...sorry i'm a newbie here....
You said there is another thread about my device....but i don't see link to this.... or i'm totally lost...!
Hélène
Click to expand...
Click to collapse
My sincere apologies I thought I'd linked the thread
http://forum.xda-developers.com/general/help/huawei-ascend-y511-u30-bootloader-root-t2829734
hopefully this will help
Good luck
Sawdoctor