[Completed] HTC Desire 310 Problems - XDA Assist

Hi Guys,
I am new to the world of android modifications and have been trying to upgrade my HTC desire 310 OS to 4.4.2 or higher. The reason for this is that PokemonGo is not supported on anything lower than 4.4.2.
After much research I have managed to install the firmware for the 320 onto my device (Comes with 4.4.2) which seems to be working fine, except that the WiFi does not work or the GPS (Strange though that after the factory reset, the WiFi worked for a couple of seconds and then disappeared).
I have seen that some people are running CM 12.1 or even 13, and have advised that this sorts out the wifi and gps issue, therefore I have been trying to flash this.
It is my understanding that I will need to follow the below steps:
1. Flash CWM
2. Unlock bootloader
3. Flash CM 12
4 Flash Gaaps
Now the problem that I am having is that when I try to sideload CMW I get the error "installation aborted apply adb sideload"
How can I get this to work?
I have also not been able to find a guide that I trust for unlocking the bootloader ( I believe this is reqiured)
Please can someone help me with this as I fear I will not be able to understand this process without some assistance.
Thank you all

HTCHell said:
Hi Guys,
I am new to the world of android modifications and have been trying to upgrade my HTC desire 310 OS to 4.4.2 or higher. The reason for this is that PokemonGo is not supported on anything lower than 4.4.2.
After much research I have managed to install the firmware for the 320 onto my device (Comes with 4.4.2) which seems to be working fine, except that the WiFi does not work or the GPS (Strange though that after the factory reset, the WiFi worked for a couple of seconds and then disappeared).
I have seen that some people are running CM 12.1 or even 13, and have advised that this sorts out the wifi and gps issue, therefore I have been trying to flash this.
It is my understanding that I will need to follow the below steps:
1. Flash CWM
2. Unlock bootloader
3. Flash CM 12
4 Flash Gaaps
Now the problem that I am having is that when I try to sideload CMW I get the error "installation aborted apply adb sideload"
How can I get this to work?
I have also not been able to find a guide that I trust for unlocking the bootloader ( I believe this is reqiured)
Please can someone help me with this as I fear I will not be able to understand this process without some assistance.
Thank you all
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
There isn't a specific forum for the 310 but you can ask the experts here:
http://forum.xda-developers.com/android/help
Good luck!

Related

Yet Another Problem Rooting

Hi all, and firstly I think I need to apologize in advance for what I'm about to ask, as it seems to be a common problem that must be simple to fix but I'll be darned if I can figure out how to do it or find out how to do it.
I've just got my first Android phone, a Moto G (a Tesco's 8G XT1032). It's updated to KitKat 4.4.2, it's been successfully unlocked from the Tesco's network, and I've got the bootloader unlocked based on Motorola's guide.
However, in order to install a privacy app (xprivacy is my current choice, I'm open to suggestions if there are other better ones) I need to complete the rooting on the device. However, despite trying to follow a few of the various guides out on the internet (including Modaco's, and one in Swedish) I don't seem to be able to get the adb command in the Windows Command Prompt window to see the device when fastboot-ed ('adb devices' just comes up blank). I believe this might be down to the drivers that Motorola supply in their 2.4.5 package, but I can't figure out how to get the device recognized.
So finally I've come here to see if anyone might be able to help out.
TIA
Ian
OK, I'm booted and rooted.
Turns out that this page http://theunlockr.com/2014/02/17/root-motorola-moto-g-running-android-4-4-2/ was basically right, but now the two bits to do with 4.3 and 4.4 can be 'ignored' and just the CWM and SU bits are required, as per this thread here: http://forum.xda-developers.com/showthread.php?t=2563599

Not able to update Verizon HTC ONE M8 to Android 4.4.3

Hello!
I have a Verizon HTC ONE M8 that no matter what it won't download the new update. I've bought 3 of them (identical) 1 month ago from Ebay. One of them was able to receive the update. On the other two i keep receiving the following message: "We were not able to download this update. To retry, go to Settings > Software update. "
My device is S-off (after a lot of effort). I've tried to get rid of all the bloatware and many more by flashing a new ROM. I have tried flashing ViperROM, ARHD, Clean ROM using TWRP Recovery, without any success. All of my attempts got stuck at the booting screen for more than 30 minutes without any success of booting into the OS. Clean ROM even refused to flash properly. Keep in mind that all the ROMs that I've flashed were based on 4.4.2 firmware, the one that my phone came with, not 4.4.3. I've searched on this forum for a flashable 4.4.3 OTA update, but no success either. What's to be done !?!? All my attempts of installing a new OS failed. Please HELP!
P.S: I'm a newbie when it comes to all of this stuff. First time doing S-off/ installing custom ROMs.
hgpt said:
Hello!
I have a Verizon HTC ONE M8 that no matter what it won't download the new update. I've bought 3 of them (identical) 1 month ago from Ebay. One of them was able to receive the update. On the other two i keep receiving the following message: "We were not able to download this update. To retry, go to Settings > Software update. "
My device is S-off (after a lot of effort). I've tried to get rid of all the bloatware and many more by flashing a new ROM. I have tried flashing ViperROM, ARHD, Clean ROM using TWRP Recovery, without any success. All of my attempts got stuck at the booting screen for more than 30 minutes without any success of booting into the OS. Clean ROM even refused to flash properly. Keep in mind that all the ROMs that I've flashed were based on 4.4.2 firmware, the one that my phone came with, not 4.4.3. I've searched on this forum for a flashable 4.4.3 OTA update, but no success either. What's to be done !?!? All my attempts of installing a new OS failed. Please HELP!
P.S: I'm a newbie when it comes to all of this stuff. First time doing S-off/ installing custom ROMs.
Click to expand...
Click to collapse
You probably won't be able to take the OTA with a custom recovery, it has to be stock. Best bet is to flash the 4.4.3 firmware from the development section since you're s-off, then flash an already rooted stock 4.4.3 rom. It's been a while since I've done this stuff so if I mentioned some incorrect info, my apologies.
dynofrk666 said:
You probably won't be able to take the OTA with a custom recovery, it has to be stock. Best bet is to flash the 4.4.3 firmware from the development section since you're s-off, then flash an already rooted stock 4.4.3 rom. It's been a while since I've done this stuff so if I mentioned some incorrect info, my apologies.
Click to expand...
Click to collapse
I flashed back again the stock ROM and i keep receiving the same message over and over again. No TWRP recovery this time, just the red triangle. I guess my best bet is to try and flash the CleanROM ODEX 4.4.3 as mentinoned here: @branmuffin17
I'll come back with the results.
hgpt said:
I flashed back again the stock ROM and i keep receiving the same message over and over again. No TWRP recovery this time, just the red triangle. I guess my best bet is to try and flash the CleanROM ODEX 4.4.3 as mentinoned here: @branmuffin17
I'll come back with the results.
Click to expand...
Click to collapse
If you are on the old firmware you need to update firmware separately.
And btw, if you freeze just one system app that can cause a Vzw ota to fail.
Question.....Is the phone active on your account? I also had one in the drawer and got the same error till I switched it to the active device on my account.
It honestly sounds like there is something preventing the ota to even download, if that's the case use dottat's ruu to return to a clean slate, if it still won't download the OTA then I would be willing to bet money that they are defective or not genuine Verizon M8s And if I were to guess it's more of the latter that would be the only valid reason every Rom you've tried fails no matter what.
sent from space
runandhide05 said:
It honestly sounds like there is something preventing the ota to even download, if that's the case use dottat's ruu to return to a clean slate, if it still won't download the OTA then I would be willing to bet money that they are defective or not genuine Verizon M8s And if I were to guess it's more of the latter that would be the only valid reason every Rom you've tried fails no matter what.
sent from space
Click to expand...
Click to collapse
Based on what you said i went on some websites to check the IMEI/ESN of the device it seems to be OK. After that i went to the Verizon Wireless website to try an activate my phone and when it comes to "Enter your Device ID to check eligibility", I type in the IMEI and the following message apears: "The phone associated with the Device ID you entered is not compatible with the Verizon Wireless network." To me is strange because on the back of the phone it says Verizon 4G LTE. When it comes to the identity of the phone it is a HTC6525LVW. The phone is GSM Unlocked (I use my phone in Europe so i needed it to be GSM unlocked). More strange it is to me that i don't receive the same message when i type in the IMEI of the others Verizon GSM unlocked HTC's ONE M8 that i bought along with this one.
I guess my only chance is to flash the new firmware @here[and after that flash the Deoxed 4.4.3 Stock Clean ROM @here. If it's not going to work i really don't know what's else it's to be done.
hgpt said:
Based on what you said i went on some websites to check the IMEI/ESN of the device it seems to be OK. After that i went to the Verizon Wireless website to try an activate my phone and when it comes to "Enter your Device ID to check eligibility", I type in the IMEI and the following message apears: "The phone associated with the Device ID you entered is not compatible with the Verizon Wireless network." To me is strange because on the back of the phone it says Verizon 4G LTE. When it comes to the identity of the phone it is a HTC6525LVW. The phone is GSM Unlocked (I use my phone in Europe so i needed it to be GSM unlocked). More strange it is to me that i don't receive the same message when i type in the IMEI of the others Verizon GSM unlocked HTC's ONE M8 that i bought along with this one.
I guess my only chance is to flash the new firmware @here[and after that flash the Deoxed 4.4.3 Stock Clean ROM @here. If it's not going to work i really don't know what's else it's to be done.
Click to expand...
Click to collapse
The message from the vzw site tells me something is not right.
Google goophone or knock off gs4, the goophone also has an m8 now too... Even with all the branding and everything. And I've seen some gs4s that run what appears to be TouchWiz cloned to a T.
I'd try calling vzw and talk to a rep and it's possible that they could give you more info other than just what the site said.
sent from space
So I did what I've said:
1. Installed firmware provided here @Tigerstown
2. Installed the Odex Stock Rooted ROM proivede here: @scrosler
I am pleased to announce you that everything is fully functional now
Phone is showing:
Android Version: 4.4.3
Software number: CleanROM 2.0.0 (after flashing it from @here)
Baseband version: 1.09.20.0702
Bulid number: 2.21.605.2 CL362279 release-keys
After managing to flash the 4.4.3 version of Android all went up without any problem. Tried to ARHD but it's still not booting. After that installed ViperROM which went up all, but to me it is not the pure HTC Sense 6 experience i was looking about and all that customization is to much for me, so i flashed CleanROM 2.0.0 and here I am. Everything is as it should be: no bloatware, pure HTC Sense 6, optimized performance... and above all the mobile hotspot is now fully functional, not to mention the EXT SAVER.
As a conclusion, to all that guys that are not able to update to the 4.4.3 version via the OTA updates provided by Verizon do what I did above (steps 1 and 2).
ATTENTION: Your device needs to be S-Off and bootloader unlocked + custom recovery!!!
Another thing worth to be mentioned: it would be great if the admins could flag this thread, cause I've seen so many users on different forums that are not able to update via the OTAs.
In the end i would like to thank to all the devs out there for their work and to the users for their support. Cheers!:highfive:

[Completed] how to install android update on moto x (xt1060) with TWRP

Hope to find someone to help an aging struggling guy. I have a moto x on which the boot loader has been unlocked and TWRP is installed. Obviously the latest VErizon android OTA will not install and continues to annoy me with attempts. I have been able to gather that i need to either a) return to stock and install OTA or b) find a custom update ROM to flash from TWRP (hope i said that all correctly), unfortunately I do not know how to properly do either.
Can anyone provide directions or point me to a thread that deals with this situation?
Thanks
Charlie
XDA Visitor said:
Hope to find someone to help an aging struggling guy. I have a moto x on which the boot loader has been unlocked and TWRP is installed. Obviously the latest VErizon android OTA will not install and continues to annoy me with attempts. I have been able to gather that i need to either a) return to stock and install OTA or b) find a custom update ROM to flash from TWRP (hope i said that all correctly), unfortunately I do not know how to properly do either.
Can anyone provide directions or point me to a thread that deals with this situation?
Thanks
Charlie
Click to expand...
Click to collapse
Hello, and welcome to XDA! The easiest alternative is probably b). There are lots of roms here: http://forum.xda-developers.com/moto-x/development and here: http://forum.xda-developers.com/moto-x/orig-development. As for flashing, here is a guide: http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android. If you need further help, there is a help forum for your device here: http://forum.xda-developers.com/moto-x/moto-x-qa.
Good luck!

how can i upgrade to android 8 without being root and bootloader closer

hello everyone I hope you help me I have the htc u11 with the android version 7 I do not get the update if there is any way to update my computer I have the software version 1.28.598.4
(ocnwhl_00598) and bootloader closed thanks in advance.
rommel0147 said:
hello everyone I hope you help me I have the htc u11 with the android version 7 I do not get the update if there is any way to update my computer I have the software version 1.28.598.4
(ocnwhl_00598) and bootloader closed thanks in advance.
Click to expand...
Click to collapse
Hello. I tried to use a Custom ROM. I unlocked my bootloader using ADB and htc's account in this site [ htcdev.com ] to get a key, and installed TWRP. Now i'm with problems. I tried many custom ROMs but the Wifi connection is broken and seems this version 1.28.598.4 is from America Latina (I'm from Brazil) and I couldn't get back to stock yet. If you would try, make a backup of your stock first by TWRP. I would really appreciate if you make it and share the Backup Folder.
kennerd_47 said:
Hello. I tried to use a Custom ROM. I unlocked my bootloader using ADB and htc's account in this site [ htcdev.com ] to get a key, and installed TWRP. Now i'm with problems. I tried many custom ROMs but the Wifi connection is broken and seems this version 1.28.598.4 is from America Latina (I'm from Brazil) and I couldn't get back to stock yet. If you would try, make a backup of your stock first by TWRP. I would really appreciate if you make it and share the Backup Folder.
Click to expand...
Click to collapse
Just a couple of ideas, have yoi tried factory reset in settings, also you did not say if you tried resetting with a ruu using the sd card method. That is another option. Also if you list your cid, mid we can help further. Hth

Firmware partitions question???

i've never flashed firmware partitions before on my other 2 moto devices, i understand having read the install of lineage that this step is req'd for this model.
i'll be using the lineage recovery to install the rom flash, this is the method ive done before. My question is once i sideload the firmware partitions, will this automatically asign which partion the rom will be written too or do i have to tell it which one, im understanding that it will be either A or B partition??
I'd like to wipe/erase as much of the stock rom off the phone, remove everything and then flash the operating rom to a clean phone. Am i understanding this correctly or missing anything? Is there anything that i need or should know or do when at this step? any help/advice would be greatly appreciated.
This is a brand new phone out of the box, is there other ways that any of you would approach this phone to totally wipe it, i'm hoping that ill get the android 11 update immediatley over ota, i understand that i will have to go through intial setup, to get to unlocking the bootloader, wish i didnt have to do that, also i dont believe kiev has an official android 12 oem/factory rom but lineage has 19.1, im thinking install 18.1 and then later reflash android 12 when it comes out. Im talking to much.... any advice be great. TIA
First things first, know your device. Is it an XT2113-2 RETUS variant or something else? As long as the bootloader can be unlocked, it seems any kiev (qualcom) variant should work with lineageos - just best to know what you started with in the event you need to ask for assistance or you want to revert back to stock.
My suggestion assuming you are starting from a new phone out of the box with the plan of putting official lineageos (either 18.1 - android 11 or 19.1 - android 12) on it:
Have the phone ota update to the most recent stock firmware. For XT2113-2 RETUS at the time of this post, this is android 11 version RZKS31.Q3-45-16-8-3 released 2022.06.30. Lineageos currently uses the binary blobs from this version. I suspect having the latest stock radios and bootloader on your device will result in fewer issues and may likely make your life easier later.
After updating to the most current stock version, request the bootloader unlock key from the moto www site. You may need to wait 24-72 hours or longer before the phone will allow unlocking. Leave the phone on, connected to your (primary) carrier, and use your carrier data (i.e. not wifi) during this time.
After updating to the most current stock version, put all the sims in the phone for the carriers you plan to use and let the phone provision the carriers (I've read this can only be done on stock firmware - switching carriers without having done this step apparently requires going back to stock). Test that you can swap sims and use the phone as you need to (e.g. wifi calling, try visual voice mail, try 5 G, etc).
Unlock the bootloader. Be sure to leave the oem unlocking toggle to allow after unlocking the bootloader.
Most important: when coming from stock (either now or in the future), follow the instructions on the lineageos www site. In particular, flash the copy-partitions.zip following the sequence described in the lineageos instructions. Don't worry about the A/B partitions for now, the device will take care of itself. You only need to flash the copy-partions.zip when comming from stock (either now or if you reflash stock in the future and then want to go back to lineageos).
Flash official linageos 18.1, android 11 (not 19.1- android 12). 19.1 is the newest version; however it may have issues. 18.1 works great (for me) and it will likely be easier for you to check if everthing is working as you expect. Upgrade (via ota) to lineageos 19.1 in a month or two.
Updating official lineageos via ota, the device will flash to the appropriate A or B partition. You should not need to do anything unless there is an issue.
I'd like to wipe/erase as much of the stock rom off the phone ...
Click to expand...
Click to collapse
Following the lineageos installation instructions will accomplish that.
Good luck.
notmyrealhandle, thanks for your time and reply, perfect write, i understood everything you said. i never thought of doing ota via data as opposed to wifi, thanks. perfect​

Categories

Resources