Database Info

[REF] GALAXY NOTE 3 (SM-N9005) GSM MODEM'S Collection (Odin)

[highlight]ALL MODEMS HERE ARE OFFICIAL by SAMSUNG and for the SM-N9005​[/highlight]
To decode what the letters/numbers of the modems mean, click here:
http://forum.xda-developers.com/showthread.php?t=1356325
FLASH GUIDE:
Switch off your device completely.
Connect to PC and Power on your phone in Download Mode (Vol Down+Home+Power)
Start Odin v3.09 (be sure it recognised your phone and show ID:COM port number)
Untick Autoreboot
Flash MODEM.BIN (CP slot - unzip it first)
Reboot once again into Download Mode using Vol Down+Home+Power
Tick Autoreboot and flash NON-HLOS.BIN
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off
DOWNLOAD MODEM+NON-HLOS N9005:
N9005XXUGBPB2 :good:New! as of 3/3/2016 Latest [Lollipop]!
Others
N9005XXUGPOK2
N9005XXUGBNL8
N9005DXUGNK1
N9005ZHUENJ1
N9005XXUGNI3
N9005DXUGNH1
N9005XXUGNG1
N9005XXUFNG2
N9005XXUENE3
...uploading previous modems
For bootloaders, older modems and stock ROM's, try here:
https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/

reserved

reserved last

help me
i follow all the step.... but still cannot success

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
odin shows "PASS" message? what error do you see?

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
Try taking out and put back your battery before flashing.

Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2

MuhammadZeeshan7 said:
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
Click to expand...
Click to collapse
no you can't... try re-flashing a new one

I have downloaded both g2 and g1 but got md5 error on each.

Questions
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?

Camela said:
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Click to expand...
Click to collapse
1- No
2- Yes
3- Not needed, i will soon upload other modems too. Anyway you can't go back from a newer version (i never needed to test it but people said it's almost impossible to do)

encho said:
I have downloaded both g2 and g1 but got md5 error on each.
Click to expand...
Click to collapse
Remove MD5 extension and unzip the tar file using winrar and then you will find two files, flash modem.bin.
---------- Post added at 07:11 PM ---------- Previous post was at 06:52 PM ----------
Tried lots of time, nothing worked out for me, still having MJ7 the old version..... Can anyone help???

Failed
finally i got whole flash process to work, but its still the same baseband version

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
sometimes baseband doesn't flash correctly, try again :fingers-crossed:

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over

KaszasM said:
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
Click to expand...
Click to collapse
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
not at all, I usually flash once and it's ok. Sometimes you need to flash twice or even more.

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
the diffrence is in the powr off way !! if you turn your device out usually way ,you flash you dont see the new baseband version in the rom , before flash you need to FORCE POWER OFF - HOLD POWER OFF button until BLACK SCREEN ,than right into download mode and flash ,and you get/see new baseband in rom too, if you dont do it like that then the baseband in rom gonna stay the same/old

worked...
Repeated the procedure twice ( 4 flashes ) and then it worked...

Lord Eko said:
no you can't... try re-flashing a new one
Click to expand...
Click to collapse
You were wrong actually. I was having Unknown baseband and flashing any KK modem didn't help.
Now i'm on KK and using JB modem.

Bootloop need Help!!!!

Hello Guys just rooted my lovely S6 and flash a recovery using flashify and now my phone wont boot, it stucks on Bootscreen ????
please help me to get working my S6 (
any idea ?

You're probably going to have to reset using Odin. What carrier do you have?

FlyingColors said:
You're probably going to have to reset using Odin. What carrier do you have?
Click to expand...
Click to collapse
im in austria (A1)
how do i do that ??

FlyingColors said:
You're probably going to have to reset using Odin. What carrier do you have?
Click to expand...
Click to collapse
im downloading now this firmware is this right ?
G920FXXU1AODG

Taker18 said:
im downloading now this firmware is this right ?
G920FXXU1AODG
Click to expand...
Click to collapse
Did you get it to work? If not, check this link to download the firmware: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387
I don't know which firmware Austria is supposed to download. I think it's based on carrier anyway.

FlyingColors said:
Did you get it to work? If not, check this link to download the firmware: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387
I don't know which firmware Austria is supposed to download. I think it's based on carrier anyway.
Click to expand...
Click to collapse
Hey yoo
I flah the firmware using odin, 3 times, everytime it fails!
Now flashed the 4rd time odin say Pass! But phone says nothing it stucks on Bootscreen again.
Than i was looking in forum, and find a post with a new recovery, it was a stock recovery, flashed this in odin and phone starts.
Phone says that memory is damaged, if i want to repair it, i click on it and pgone starts and no i have succsesfully installed TWRP and Root
This was the first time i get this type of peoblem since i have the S1,S2 thill S6 ???

930F revert to stock rom

hi there,i´ve tried superman rom but i think i canget away with root and sound mode, altough i´m having a problem in revert to stock,after downloading the rom from sammobile and flasit with Odin it always fail in the system part of the process,any hints please?

pbls said:
hi there,i´ve tried superman rom but i think i canget away with root and sound mode, altough i´m having a problem in revert to stock,after downloading the rom from sammobile and flasit with Odin it always fail in the system part of the process,any hints please?
Click to expand...
Click to collapse
Hi mate
What error do you get ?
Try with this guide
http://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431

When I'm trying to flash the original rom in the AP part it fails,says system read only,but I already manage to flash superman rom,although I would like to flash stock again

pbls said:
When I'm trying to flash the original rom in the AP part it fails,says system read only,but I already manage to flash superman rom,although I would like to flash stock again
Click to expand...
Click to collapse
Flashing with odin should not matter but your bootloader is unlock (developer options)
Try to flash it as described in the guide i posted before.
also her you have another way to go
http://forum.xda-developers.com/galaxy-s7/how-to/guide-revert-to-stock-anytime-kies-t3396314

Problem solved,flashed in another PC and solved it,probably it was a corrupt file downloaded,thanks

pbls said:
Problem solved,flashed in another PC and solved it,probably it was a corrupt file downloaded,thanks
Click to expand...
Click to collapse
Great news , thanks for letting us know

Bricked samsung galaxy grand prime G531H/DD

MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...

dhenewar said:
MY phone (Samsung galaxy grand prime SM-G631H/DD) got bricked after i tried to flash custom rom .. I forget to enable usb debugging mode and turn on OEM my pc was turned off during flashing process.. I am not able to flash anything from odin it gives error ..like... while flashing twrp fap lock prevents it from flashing it .. WHEN i turn on my phone "Firmware upgrade encountered an issue.Please select recovery mode in kies&try again . But the samsung kies software does noty support my device ..help me guys...
Click to expand...
Click to collapse
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Odin is the only way.
Try these troubleshooting steps for a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Odin can still flash the device while in the "encountered an issue, connect to Kies" screen.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default I have tried 3 of them one failed at system.img .another at boot.img .. another stucks at DO NOT TURN OFF THE TARGET! ..

$Ail.A$ce said:
Thnks for reply bro but I have seen it already don't know what to do but
Hey bro n there was many list of firmware version to download does it matter ? In Samsung official site I don't know which version is my phone's default
Click to expand...
Click to collapse
There should be a 3 letter code that represents the country/region/carrier for each firmware version.
Find the newest version for your model number that matches your country/region/mobile carrier.
Sent from my SM-S903VL using Tapatalk

Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin

-Hope- said:
Hello,
in addition to what Droidriven mentioned i would recommend also to use the latest stable odin
Click to expand...
Click to collapse
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
I usually recommend a version of Odin that was released shortly after the device was released because those versions were updated to be compatible with the device, whereas newer versions of Odin are less compatible with devices that were released a year or more before it.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download . the PDA version/code which has different number in last like (AOH .AOH2.AOI.AOQ ) so on ..do they need to match my device .. the below link is the source I downloaded
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .

$Ail.A$ce said:
sorry for late reply bro .. the firmwares I had got are the model version's of my country ..I got slow internet so takes time to download ..Should the PDA version/code match my device ..from the below link
https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531H/NPL/ .. n thanks bro I will try with Odin version suitable for device .
Click to expand...
Click to collapse
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
As long as what you flash is for your specific device model number and your region/carrier you should be fine.
Click to expand...
Click to collapse
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?

dhenewar said:
Well bro I downloaded all the firmware of it's carrier available .. and also tried with different Odin .... Still it fails at system.img .. ?
Click to expand...
Click to collapse
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Droidriven said:
The custom ROM that you tried to flash, was it for your model number? Or was it for a different device?
Try different USB ports, try a different PC, try a different cord.
If all else fails, try finding a copy of your device's PIT file and flash that in Odin along with the stock firmware. Place the firmware where it goes then place the PIT in the pit tab in odin, make sure the "re-partition" option is checked in Odin then start.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks

dhenewar said:
Tried everything bro .. I gave up on this phone ..However I appreciate your concern bro thanks
Click to expand...
Click to collapse
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Droidriven said:
Win some, lose some.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Haha there's no win bro .. gone is gone .. for new u should pay some or regret some for messing your lonely only phone ?

Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.

-Hope- said:
Hello, This could be kind of weird but
Download the Unified Android tool kit
Do a copy of the frimware you want to flash
remove the .md5 extension from the file name of the new file
the image file should now transfer into a zip file
extract it in the Unified Android tool kit INPUT folder
Run the ToolKit
it will do an update check
now type 99 and press enter
a list of choices will appear choose the " create tar files from image files" it's maybe number 8 as i remember
now choose to make a separate tar files of each image file
once done , the tar files will be placed in the OUTPUT folder
try to flash System tar file alone without the other partitions.
Click to expand...
Click to collapse
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file

dhenewar said:
Sorry for v.late reply bro .. for this to work fo I need to be rooted?? And I have done exactly what you said but I got stuck in that system.tar file flashing
How much time it would take to flash system.tar file
Click to expand...
Click to collapse
System.IMG is the largest file to flash so it would be the longest to flash

-Hope- said:
System.IMG is the largest file to flash so it would be the longest to flash
Click to expand...
Click to collapse
It got stuck at like 3 or 4 % .. for 20 minutes I waited it didn't progress any further
The imp. Thing is Fap lock n ?

And when I try flashing other .tar files it goes 100% n stuck at RQT_CLOSE!! FOR A WHILE and it fails

Failed Root Z flip 4 brick & recovery..now what

So long story short was trying to root went to sammobile they didn't have my vzw sm-f721u and I updated flip to 13 while prior. Bricked because I was high and forgot to do the Magick trick before flashing then had to take sammobiles f721u1 vzw 12 and flashed but still at 13 didn't downgrade , unbricked, tried Magick patch for sha256 fix but didn't work. No root. Sammobiles f721u1 is slower than my og f721u ..bvka which can only find for sale and shady at sammfrew.com

Can you access Download mode?

Someone Anyone said:
Can you access Download mode?
Click to expand...
Click to collapse
Yes

fbiheadquarters said:
Yes
Click to expand...
Click to collapse
Get a fresh copy of firmware from here:
Firmware from SamFw
Or get it from the Frija Tool.
Get to Download mode and run Odin 3 on your PC (Download Samsung USB drivers in case it doesn't recognizes your device.)
Flash AP, BL, CSC, CP
Do not flash userdata
(Remember: Untick Auto Restart)

Someone Anyone said:
Get a fresh copy of firmware from here:
Firmware from SamFw
Or get it from the Frija Tool.
Get to Download mode and run Odin 3 on your PC (Download Samsung USB drivers in case it doesn't recognizes your device.)
Flash AP, BL, CSC, CP
Do not flash userdata
(Remember: Untick Auto Restart)
Click to expand...
Click to collapse
There's no firmware for free anywhere . Frija doesn't have sm f721u....bvka. and the new fw I have didn't downgrade my android when I flashed. Tried again and wouldn't root. Did Magick correctly. Think I have to wait.
Once you go 13 you can't downgrade

fbiheadquarters said:
There's no firmware for free anywhere . Frija doesn't have sm f721u....bvka. and the new fw I have didn't downgrade my android when I flashed. Tried again and wouldn't root. Did Magick correctly. Think I have to wait.
Once you go 13 you can't downgrade
Click to expand...
Click to collapse
Yes exactly as you say I've tried. I get Sha 256 error. Even with patched odin

fbiheadquarters said:
Yes exactly as you say I've tried. I get Sha 256 error. Even with patched odin
Click to expand...
Click to collapse
I think it is because of the HOME CSC
I had this issue once and got it solve by referring to this thread : https://forum.xda-developers.com/t/...flash-unbranded-software-on-sm-g988u.4095409/

Someone Anyone said:
I think it is because of the HOME CSC
I had this issue once and got it solve by referring to this thread : https://forum.xda-developers.com/t/...flash-unbranded-software-on-sm-g988u.4095409/
Click to expand...
Click to collapse
Yes this is the patched version of Odin I've tried and stopped using home csc

Someone Anyone said:
I think it is because of the HOME CSC
I had this issue once and got it solve by referring to this thread : https://forum.xda-developers.com/t/...flash-unbranded-software-on-sm-g988u.4095409/
Click to expand...
Click to collapse
I'm going to try again with some new samfw files. Thanks for sharing. Hopefully it works. Still haven't found sm-f731usq.....bvka
That was the original firmware I had installed and have only seen it on an imposter sammfw site.
Going to do Magick and try again with and without patched Odin then will update

fbiheadquarters said:
I'm going to try again with some new samfw files. Thanks for sharing. Hopefully it works. Still haven't found sm-f731usq.....bvka
That was the original firmware I had installed and have only seen it on an imposter sammfw site.
Going to do Magick and try again with and without patched Odin then will update
Click to expand...
Click to collapse
fbiheadquarters said:
Yes this is the patched version of Odin I've tried and stopped using home csc
Click to expand...
Click to collapse
Someone Anyone said:
I think it is because of the HOME CSC
I had this issue once and got it solve by referring to this thread : https://forum.xda-developers.com/t/...flash-unbranded-software-on-sm-g988u.4095409/
Click to expand...
Click to collapse
I've tried every which way and ya man ill post pics in a bit. No dice