Database Info

[MOD][XPOSED][i9500]Enable Call Recording!

If you live in an area where call recording is legal, use this modification to enable the ability to record calls from within the in-call UI of the phone.[@rootr]. Modified the module to work with I9500.
This should work on any devices though i have not tested except on I9500! Feedback on other devices is appreciated!
For any reason, if you endup in bootloop, then try flashing xposed disabler from this thread. There is no need to restore nandroid backup or flashing the rom again. For all other devices, just install the module unless your device is exonos for which you need to flash the patch!
Requirements
1. Xposed Framework - Can be downloaded from HERE
2. Valid Recovery - CWM / TWRP
Installation
1. Download the attached module and install it on the phone
2. Download and Install Xposed framework from the ink above
3. Launch the Xposed Installer and go to the "Modules" tab (you will also get there if you click on the notification warning you that the module is not enabled yet)
4. Enable the Call Recording module by checking the checkbox
5. Reboot to recovery and flash the "
6. Flash the Patch_CallRecording_I9500.zip
7. Reboot
7. Done
8. All the recordings will be saved under /sdcard/sounds folder
Screenshot
Will come later
Credits
1. rovo89 - Source Code
Feel Helped, Press Thanks! Anyone is free to use this with Credits and link to this thread!

Has anyone tried this on the 9505?
Sent from my GT-I9505 using xda premium

Thanks friend!
grgsiocl you are amazing dev!
regards

working fine here. thanks.

Ya no work for t-mobile sgh-m919....sends it into bootloop

This will work on att samsung galaxy s4? Afraid.to try it, don't want to have to restore again
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

puffpuffpass702 said:
Ya no work for t-mobile sgh-m919....sends it into bootloop
Click to expand...
Click to collapse
use xposed disabler zip . thats all and there is no need to flash the rom or restoring your nandroid backup!

Solange82200 said:
This will work on att samsung galaxy s4? Afraid.to try it, don't want to have to restore again
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Nothing is going to happen. First copy the xposed disabler.zip which is mentioned in OP and copy it to SD card. Install the module and reboot. If the phone doesnt boot, then go to recovery and flash the xposed disabler.zip. Thats all. Your phone will boot again. Dont be afraid guys, just think, How many times I must have booted the phone before I released this module! This works aboslutely fine on any exonos device and for other devices, they might have to install the module only instead of patch!
Remeber all the call recording mods which are available here doesnt record the calls properly and you will "Trrrrrrrrrr" noise when you record and this module doesnt have that problem. I will be porting today almost all the modules of xposed which are available as of right now!

Where is screenshots ?

How do I uninstall the apk for the actual call recorder? It is nowhere to be found in my app list
Nevermind finally found it under E, enable call recording
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

does the rom need to be deodexed?

daviefl86 said:
does the rom need to be deodexed?
Click to expand...
Click to collapse
No need it does works on odeoxed
Sent from my GT-I9500 using Tapatalk 4 Beta

grgsiocl said:
No need it does works on odeoxed
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
after installing this framework (xposed)on my odex i9500. can i install mods(3mint) that require deodexed roms .without deodexing?

daviefl86 said:
after installing this framework (xposed)on my odex i9500. can i install mods(3mint) that require deodexed roms .without deodexing?
Click to expand...
Click to collapse
this mod is nothing to do with 3mint. This mod works both on odex and deodex roms. If 3mint mod requires the rom to be deodexed, then you need to be on deodexed rom and then install this module!

Any chanc for I9505 !!???
Thanks
Verstuurd van mijn GT-I9505 met Tapatalk

Thanks for the mod, gonna try it out on my Nexus 4 soon! Did you publish the sources somewhere, like github? I'd love to take a look at them, as I just started writing a few Xposed mods myself (see signature).
Cheers!

Can I use callrecorder.apk (https://play.google.com/store/apps/...sMSwxLDEsImNvbS5za3ZhbGV4LmNhbGxyZWNvcmRlciJd), and set in settings "two way call recording kernel depended" and all wil be fine?
Whitch call recording apk you are using?

stammler said:
Thanks for the mod, gonna try it out on my Nexus 4 soon! Did you publish the sources somewhere, like github? I'd love to take a look at them, as I just started writing a few Xposed mods myself (see signature).
Cheers!
Click to expand...
Click to collapse
Did you get it to work on the Nexus 4?
Thanks

During an INCOMING CALL, if the loudspeaker is used/activated BEFORE the the call recorder, then a recording for that conversation would no longer be possible - hitting the call recorder button will do nothing at all. As far as I'm concerned the only way to "reset" the call recorder and be able to record again, would be to (1) end the current conversation AND (2) toggle the screen On/Off. This issue seems to be occurring only for incoming calls - following the same testing steps for outgoing calls shows no negative impact on call recording. I have tested it with screen lock set On and then Off and also answered the incoming-test-calls while the screen was locked, and then unlocked and the issue was always the same for all 4 scenarios. I'll update this note if I'll find a work around. Please post updates/comments about this particular behavior.

Bradden1 said:
Has anyone tried this on the 9505?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
yes i have test it, very :good: MOD

[APPS][4.2.2] Galaxy Note 3 - 4.3 Apps - Testing / Working on Note 8.0 (WIP)

Playing around with some apps from the Note 3 to see what works on our 4.2.2 Note 8.0...
I'm currently running CivZ-FLEX-BEAM v3.3
Use at your own risk
These apps are from Android 4.3...expect some incompatibilities
Use at your own risk, feel free to add your own experiences.
Working
Scrapbook - Download
More Info: Hands On
***flash in recovery*** (I'm Using TWRP, have not attempted with CWM)
Can FC using certain features / no air command support
Click to expand...
Click to collapse
Needs Air Command Utility to function fully. Limited use without it. WIP
Gallery - Download
***flash in recovery*** (I'm Using TWRP, have not attempted with CWM)
Seems 100% Working, with framework issues
Click to expand...
Click to collapse
Both of these might take someone with more framework skills than I to port.
Gallery is usable, File Manager FC frequently
File Manager - Download
***flash in recovery*** (I'm Using TWRP, have not attempted with CWM)
FC quite a bit, with framework issues
Click to expand...
Click to collapse
Weather - Download
***flash in recovery*** (I'm Using TWRP, have not attempted with CWM)
Click to expand...
Click to collapse
Wallpaper Chooser - Download
***flash in recovery*** (I'm Using TWRP, have not attempted with CWM)
Click to expand...
Click to collapse
More tested files coming.
Credits:
The guys over in Note II forums for the files, and some tweaks for their device.

Scrapbook and gallery app both have same downloading link I mean I think u have by mistake added gallery app dropbox link into scrapbook app download link or I am wrong ????:what:

Link fixed! Thanks

Bandage said:
Link fixed! Thanks
Click to expand...
Click to collapse
OK downloading now will report later
BTW great work:thumbup:
Edit:- Scrapbook worked nicely just got fc when I try to add drawing
Other all works well
Sent from my GT-P3110 using Tapatalk 4

Thank you!! But I still can't figure out how to use the scrapbook. Whenever I make a scrap and then share it to the app, it won't show on the app later. Help!!
Enviado desde mi GT-N5110 usando XDA Premium HD app

macrolex said:
Thank you!! But I still can't figure out how to use the scrapbook. Whenever I make a scrap and then share it to the app, it won't show on the app later. Help!!
Enviado desde mi GT-N5110 usando XDA Premium HD app
Click to expand...
Click to collapse
Right now, it's just working as a clipboard only. Features like linking, etc aren't functional. Am playing around with the 4.3 Launcher, and trying to dig out the Air Command. Once / if we can get Air Command going it should improve scrapbook functionality.

Bandage said:
Right now, it's just working as a clipboard only. Features like linking, etc aren't functional. Am playing around with the 4.3 Launcher, and trying to dig out the Air Command. Once / if we can get Air Command going it should improve scrapbook functionality.
Click to expand...
Click to collapse
Yes you are right but it works well
U guys here made my mind for not buying note 3 by sharing its apps and mods :beer:
Sent from my GT-P3110 using Tapatalk 4

From Note 3 Bloomberg+ app works fine - see attached. Install as normal app.

Note 3 Active application widget also works on our Note 8.0 and Note 3 Alarm widget too.
push both apps to System\app folder, and change permission to - rw-r--r--, and reboot.
I will post more that I have tested and confirm working...

Note 3 VoiceNote app (works)
VoiceNote app from new Galaxy Note 3 - see attached
Push it to System\app folder, and change permission to - rw-r--r--, and reboot.
and give a try....

Installed fine using twrp on CivZ-FLEX-BEAM but some albums appear off screen to the right.
Any way to fix this or rollback to my previous gallery version? Stock gallery app?

Thanks!

[APP] Galaxy Lockscreen Effects

Just want to share another simple app of mine that allows you to use the hidden lockscreen effects available on Note 4 or S5. Just download and install. No root required. See screenshot for available lockscreen effects.
DOWNLOAD HERE
Tested on my Note 3 N9005 Lollipop but I believe some of the effects will work on other Galaxy devices.
Use at your OWN RISK.

Amazing.

It have me system ui force close when I selected ink effect, and for other effects they didn't seem to work. And I had a tough time to get my phone back to working. I almost thought I would have to reflash. Thanks anyway, maybe it is not for me.

sahil4u said:
It have me system ui force close when I selected ink effect, and for other effects they didn't seem to work. And I had a tough time to get my phone back to working. I almost thought I would have to reflash. Thanks anyway, maybe it is not for me.
Click to expand...
Click to collapse
All effects are working fine here on a stock ROM without any modification.

Working great on a stock XEO (Poland), rooted ROM.
Cheers mate.

Any chance for those who are unable to access Google Website including Google Play？

kmokhtar79 said:
All effects are working fine here on a stock ROM without any modification.
Click to expand...
Click to collapse
That means it will work only on stock ui. I am using xposed framework and many other xposed modules. So I guess it's conflicting with them.

sahil4u said:
That means it will work only on stock ui. I am using xposed framework and many other xposed modules. So I guess it's conflicting with them.
Click to expand...
Click to collapse
This I believe would only works on lollipop.

Oh then it should have been mentioned in op.

amazing on Note 3 thanks

Thank you soo much ive been looking for this for long time
Works perfectly on N900

Working on n900
Thank

but it gives me a little tag on effects i think
I9505 official Lollipop 5.0.1 rooted

the link in op is dead.
Can someone share it?
thanks in advance

Rajada said:
the link in op is dead.
Can someone share it?
thanks in advance
Click to expand...
Click to collapse
The link works great on my side. You also can go to the play store and search for"Galaxy Lockscreen Effects"

and2 said:
The link works great on my side. You also can go to the play store and search for"Galaxy Lockscreen Effects"
Click to expand...
Click to collapse
maybe is country block.
Here, the link is "empty":
had already done the search obviously not appear the apk.
Can you please, send me by PM?

Rajada said:
maybe is country block.
Here, the link is "empty":
had already done the search obviously not appear the apk.
Can you please, send me by PM?
Click to expand...
Click to collapse
Yeah, it looks like. I can post the apk here but not without xperiacles permission.

need apk plz send me this apk
Sent from my SM-N9005 using XDA Free mobile app

Hi! Your link is broken bro

can't download links are dead plz upload apk

Popular Xposed Mods

Hello all,
I was wondering what xposed mods you use and why.
Thanks,
Mike

XTouchWiz so that you can enable multiwindow for any app.

I'm looking for the xposed zip for our device..any help would be appreciated
Sent from my SM-G935U using XDA-Developers mobile app

Xposed for S7
knox0x1 said:
I'm looking for the xposed zip for our device..any help would be appreciated
Sent from my SM-G935U using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey, this is the link from @lahegry that worked for me. https://mega.nz/#F!b9hG1Y4Q!z4xHvUzAjjmr16_oHWAjIw
Instructions:
0) Be rooted (duh)
1) Flash .zip using FlashFire(best) or ODIN
2) Install the .apk provided
3) Check to see if it worked properly by going to the Framework tab
4) If you got the green, enjoy! If not,check to make sure root is properly installed and your FlashFire has proper access. Then re-flash and try the process over again.
Let me know if you need any help!

Maltego said:
Hey, this is the link from @lahegry that worked for me. https://mega.nz/#F!b9hG1Y4Q!z4xHvUzAjjmr16_oHWAjIw
Instructions:
0) Be rooted (duh)
1) Flash .zip using FlashFire(best) or ODIN
2) Install the .apk provided
3) Check to see if it worked properly by going to the Framework tab
4) If you got the green, enjoy! If not,check to make sure root is properly installed and your FlashFire has proper access. Then re-flash and try the process over again.
Let me know if you need any help!
Click to expand...
Click to collapse
That link takes me to the app store for an app called mega.. is that right?
Sent from my SM-G935U using XDA-Developers mobile app

Xposed for S7
knox0x1 said:
That link takes me to the app store for an app called mega.. is that right?
Sent from my SM-G935U using XDA-Developers mobile app
Click to expand...
Click to collapse
That's correct! If you don't want to download the MEGA app, here is a link to my site. I have uploaded them here
http://skyof.red/xposed/s7/
Let me know if you need any help!

Maltego said:
That's correct! If you don't want to download the MEGA app, here is a link to my site. I have uploaded them here
http://skyof.red/xposed/s7/
Let me know if you need any help!
Click to expand...
Click to collapse
Thank you.. I see the xposed apk.. but what is the other one?
Sent from my SM-G935U using XDA-Developers mobile app
---------- Post added at 03:35 AM ---------- Previous post was at 03:34 AM ----------
Maltego said:
That's correct! If you don't want to download the MEGA app, here is a link to my site. I have uploaded them here
http://skyof.red/xposed/s7/
Let me know if you need any help!
Click to expand...
Click to collapse
Thank you.. I see the xposed apk..but what's the other file?
Sent from my SM-G935U using XDA-Developers mobile app

Xposed for S7
knox0x1 said:
Thank you.. I see the xposed apk.. but what is the other one?
Sent from my SM-G935U using XDA-Developers mobile app
---------- Post added at 03:35 AM ---------- Previous post was at 03:34 AM ----------
Thank you.. I see the xposed apk..but what's the other file?
Sent from my SM-G935U using XDA-Developers mobile app
Click to expand...
Click to collapse
The other file is the flashable .zip file.
Assuming you already have your Galaxy S7 or S7 Edge rooted, you need to install FlashFire from the Google Play store.
After you have installed FlashFire, click the little plus button and select 'Flash ZIP or OTA'. Then select that zip file you downloaded from my site.
After that, it will pop up a box. Leave the settings as they are and continue, then click 'Flash'
Your screen WILL black out for a bit and take a while to boot. That is NORMAL. Please, DO NOT PANIC. The app will warn you this as well.
Do not install the apk file until you have flashed the zip
Let me know if you need anymore help!
Leave a thanks if I am helping you

Maltego said:
The other file is the flashable .zip file.
Assuming you already have your Galaxy S7 or S7 Edge rooted, you need to install FlashFire from the Google Play store.
After you have installed FlashFire, click the little plus button and select 'Flash ZIP or OTA'. Then select that zip file you downloaded from my site.
After that, it will pop up a box. Leave the settings as they are and continue, then click 'Flash'
Your screen WILL black out for a bit and take a while to boot. That is NORMAL. Please, DO NOT PANIC. The app will warn you this as well.
Do not install the apk file until you have flashed the zip
Let me know if you need anymore help!
Leave a thanks if I am helping you
Click to expand...
Click to collapse
Got it imstalled.. thanks..
Sent from my SM-G935U using XDA-Developers mobile app

Xposed for S7
knox0x1 said:
Got it imstalled.. thanks..
Sent from my SM-G935U using XDA-Developers mobile app
Click to expand...
Click to collapse
No problem! Let me or anyone else know if you need help with anything else. The community is here to help!

Hi there,
I use YouTube ad away, for obvious reasons.
Xkik for extra kik features such as disabling read receipts and slight theming choices
Whatsapp emoji replacer - choice of what emojis you want in kik, doesn't show for the other party though
Whatsapp extensions - more features for whatsapp such as always show online and more
Rootcloak- for apps that won't let you use them if you are rooted
iFont- change fonts, not only system wide but on a per-app level
Most of these are for theming, and there are probably more I would use, just haven't found them yet.

Xposed working for Nougat with stang5litre 5.0 Edition s7 Edge N Rom
Hello,
This is a update from my last post of Xposed install, no need to do any flash, just install Xposed Installer 3.1.2. I'm running the S7 Edge G935V with Xposed working great. Downloaded Xposed installer by Rovo89 from this link XposedInstaller_3.1.2.apk or "This Link" then updated Xposed Framework to 88.1, works amazingly with nougat!
Here is a helpful link "working modules for Nougat Xposed" I was also able to get Greenify working with Xposed, It will only work with this Beta version, you can get it from this link Greenify.v3.7.1.apk, I have also tried Amplify, convert it to System App and change all files permission to 777, then set "SELinux Toggler" to "PERMISSIVE" mode, reboot your device, once the device has booted back up, confirm the change. I've installed AFWall+ and its working well. One of the apps I installed called Xprivacy has had to many glitches and made the system slow, I wouldn't recommended installing Xprivacy. The new stang5litre 5.0 Edition s7 Edge N Rom runs great, love it!
If you notice a lag, then do a cache clean. I use TB to clean cache, system logs and Dalvik cache, now ram is back to normal. I also use a application from play store called "HEBF Optimizer Root" this application aims to increase the performance of your device.
Hopefully this helps :good:

DONT, do as said in this last post. I did.
Now to figure out how to get phone back to working. Never had to do this without twrp before.

{Aroma}S7/S7Edge Air Command for Nougat

Here's Air Command port for Nougat and Tested only on ROOTED S7/S7e variant (Nougat firmware) , Enjoy!!!
How to?!?
PHONE needs to be rooted or it wont work,(If using magisk download PHHSU in playstore)
1. Download , Hit thanks?!? (If it works) and FLASH AWAY (Recovery)
- Open Setting/Advance feat/Spen/Detachment option choose Air command
- Open Setting/Advance feat/Spen/Air command and enable floating icon
- Open air command and accept root . and your done
#Here's another friendly guide for beginners LINK Here
#For doing Clean Install rom
No need to setup air command like above it will automatically setup if you clean install the rom+aircommand
Whats new?
#Added more images
#Adjust some configuration
#Lock/Unlock Icon Working on Both Clean Odex and Deodexed rom stock(No Mod)
# Aroma Installer
# Different Background Colour
# Air command Removal
# Dark/Blue/Gray/Pink/Teal/vader123/monkey/car/butterfly/koi
Bugs:
#When unlock/unlock the devices the icon is gone due to Framework-res.apk has been modified.
#Smart Select
#Magisk v11.1 - You need to install PHHsu.apk in playstore
#Everything should work except Smart select (gif works) and maybe something else..
AirCommand Aroma Installer V2 - Link HERE
Ps:"Anyone can use it/add it on your rom aslong your giving a proper Credits. Thanks"
Credit and Thanks
@amarullz for Aroma
@ambasadii - for testing and help
@thereassaad for helping me alot.
@ravijani - APK to launch the Aircommand.
@sanoc69 - for testing and help
@Near_07 for colour background themes
@everyone
@Ouweshs28 for testing
@raakaysh for a nice friendly tutorial on how to install
@vnteam
@xda
@ANyOne i forgot please pm me

Permission denied when trying to download

intxeon said:
Permission denied when trying to download
Click to expand...
Click to collapse
Try now
Sent from my SM-G935F using Tapatalk

For me working perfect, thx man

re: air command
elkinguerrabarreto said:
For me working perfect, thx man
Click to expand...
Click to collapse
Do ALL the features in air command work
properly using your finger instead of the spen?
Good luck,
have a great day!

Misterjunky said:
Do ALL the features in air command work
properly using your finger instead of the spen?
Good luck,
have a great day!
Click to expand...
Click to collapse
Yes, all rigth, perfect

elkinguerrabarreto said:
Yes, all rigth, perfect
Click to expand...
Click to collapse
it isnt working from AOD screen!
but thanks for you work
its amazing

elkinguerrabarreto said:
For me working perfect, thx man
Click to expand...
Click to collapse
Awesome no worries . And enjoy
Sent from my SM-G935F using Tapatalk

Can I uninstall it with titanium backup?

Smart Select
Is the "Smart Select" in air command working?
For me it looks like the smart select option is
the only option in air command which does
not work.
If it is working is there some special way to use it?
I click on smart select and choose the rectangle or
oval but after doing that nothing happens when I
click on screen or swipe the screen.
How exactly is smart select supposed to
work?
Thanks in advance!

Misterjunky said:
Is the "Smart Select" in air command working?
For me it looks like the smart select option is
the only option in air command which does
not work.
If it is working is there some special way to use it?
I click on smart select and choose the rectangle or
oval but after doing that nothing happens when I
click on screen or swipe the screen.
How exactly is smart select supposed to
work?
Thanks in advance!
Click to expand...
Click to collapse
It doesnt work mate .. i even write it on Bugs:
Sent from my SM-G935F using Tapatalk

re: air command
Repulsa said:
It doesnt work mate .. i even write it on Bugs:
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Thanks for letting me know, I remember in the old
S3, S4, S5, S6 and the S6 Edge+ days when this
air command mod became available it had the
exact same issue as this mod here has.
There was only one developer here in xda who did get all
the air command features working in the S6 Edge+ phone
and that was @dr.ketan
Thanks, have a wonderful day!

Not working here
Using superman's Rom

ahmad 25 said:
Not working here
Using superman's Rom
Click to expand...
Click to collapse
Works fine .. make sure u follow the "How to"
Sent from my SM-G935F using Tapatalk

Hmm? Not working Renovate rom with Magisk root. Not open Apk???
Sent from my SM-G930F using Tapatalk

Works with magisk too
Enviado do meu SM-G935F através de Tapatalk

The Game said:
Hmm? Not working Renovate rom with Magisk root. Not open Apk???
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Same problem the apk file won't open

ahmad 25 said:
Same problem the apk file won't open
Click to expand...
Click to collapse
The Game said:
Hmm? Not working Renovate rom with Magisk root. Not open Apk???
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Go to playstore and download phh. I dont know why magisk v.11.1 not opening the app..
Sent from my SM-G935F using Tapatalk

Everything's working perfectly after changing to supersu root
Thank you for your effort

ahmad 25 said:
Everything's working perfectly after changing to supersu root
Thank you for your effort
Click to expand...
Click to collapse
Np and actually theres should not be any issue with magisk aslong you download phhsupersu in playstore . Have a nice day.
This one i made to my friend ambasadii
Sent from my SM-G935F using Tapatalk