Related
I'm currently using stock Nexus 5 firmware but would like to have some of Cyanogenmod apps too .
Like cLock widget, file manager, torch, sound recorder.
I'd like to get them from official Cyanogenmod website as I don't trust APK files distributed by third parties.
However when I extract APKs from latest Cyanogenmod M release for Nexus 5 (currently cm-11-20141008-SNAPSHOT-M11-hammerhead.zip) some of them forceclose on start .
So I extracted the apps I need from latest stable release for Nexus 4 (cm-10.2.1-mako.zip) and they seem to work fine.
But is there a way to make APKs from Nexus 5 Cyanogenmod releases work on stock Nexus 5 firmware?
Are APKs in Nexus 5 Cyanogenmod builds any different from APKs included in Cyanogenmod builds for other phone models? Or there is some kind of 'standard' Cyanogenmod APK set which is afterwards 'tuned' for each phone model?
Some may require libs or framework. For those that only require lib files, simply open the .apk in question on your PC using WinRAR or the equivalent (it is technically a renamed .zip file)
If it has a lib folder or any files ending in .so more likely than not, you'll need to move those files to system/lib before the app in question will function properly.
There's also CM Apps available in the playstore, no guarantee they'll work. But I think they've been optimised to work on any firmware as I've never had any issues with them.
Thanks for quick replys!
I guess the apps indeed need some custom CM libraries. I may try this after checking out official Lollipop firmware, not going to root untill then.
And yes, APKs from 'CM Apps' work well (app itself broke but APKs are still on autohor's website). I'm interested where did the author get them. Just by trial & error from builds on CM website or not.
radicalisto said:
There's also CM Apps available in the playstore, no guarantee they'll work. But I think they've been optimised to work on any firmware as I've never had any issues with them.
Click to expand...
Click to collapse
algus said:
Thanks for quick replys!
I guess the apps indeed need some custom CM libraries. I may try this after checking out official Lollipop firmware, not going to root untill then.
And yes, APKs from 'CM Apps' work well (app itself broke but APKs are still on autohor's website). I'm interested where did the author get them. Just by trial & error from builds on CM website or not.
Click to expand...
Click to collapse
They work on your ROM because your ROM has CM stuff in it. Most of them won't work at all on actual full AOSP ROMs without them, like PA.
He probably just downloaded the ROM zips and took the apk files out.
Lethargy said:
They work on your ROM because your ROM has CM stuff in it. Most of them won't work at all on actual full AOSP ROMs without them, like PA.
He probably just downloaded the ROM zips and took the apk files out.
Click to expand...
Click to collapse
Yeah err I don't have a CM ROM...
radicalisto said:
Yeah err I don't have a CM ROM...
Click to expand...
Click to collapse
Yeah, you'd be surprised how many ROMs have CM stuff in them.
Lethargy said:
Yeah, you'd be surprised how many ROMs have CM stuff in them.
Click to expand...
Click to collapse
That include stock too?
Serious note, I only use the Camera app, Apollo and torch from the CM apps application. Never had any issues with them in all honesty.
radicalisto said:
That include stock too?
Serious note, I only use the Camera app, Apollo and torch from the CM apps application. Never had any issues with them in all honesty.
Click to expand...
Click to collapse
Those should be fine anyways since they don't have CM dependencies.
[size=+4]LG F[/size][size=+3]RAMEWORK[/size]
[size=+3]~~ A[/size][size=+2]NNOUNCEMENTS[/size][size=+3] ~~[/size]
Dec 4 2016
Deleted github repo (it's not helping)
Oct 23 2016
4K + HFR Mod by @defcomg (manual install only, flashable zip later)
Oct 9 2016
Project is now online, partially (GitHub) details below
Sep 10 2016
Experimental LG Camera port uploaded
Aug 15 2016
Opened our GDrive folder to public and overhauled OP
[size=+3]~~ A[/size][size=+2]BOUT THE PROJECT[/size][size=+3] ~~[/size]
LG Framework is the backbone of every bloat feature LG added and this project aims to re-inject those important things to be able to run again OEM-implemented features like QuickCover, QuickMemo, QuickSlide Apps, etc. (LG Camera included in the list)
AOSP delivers the performance that we sought, but with those improvements come sacrifices. Other features shipped by LG aren't included in those lovely projects. So here we are, the X7 Team, and our kind and brave testers, to bring forth LG's bloat work to the world of Open-Source Softwares (not to open-source or reverse engineer it)
[size=+3]~~ M[/size][size=+2]ISCELLANEOUS[/size][size=+3] ~~[/size]
| LG Framework and Related Works |
G2 Camera Chromatix Mod (second page)
| G2 Camera by @B!GBOY |
[size=+1]What's Happening?[/size]
Currently testing the framework resource which is injected manually
The code part of LG Framework is now working to CM-based ROMs
(Low Priority) Bypass signature checks using selective exclusion to avoid security holes
Click to expand...
Click to collapse
[size=+2]Links[/size]
[size=+2]4K Mod + 60/120 HFR[/size]
Here's the zipped framework from CloudyG2: https://www.dropbox.com/s/ta3l3iwhdylkcwy/CloudyG2.zip?dl=0 Enjoy!
Startrek852 said:
Here's the zipped framework from CloudyG2: https://www.dropbox.com/s/ta3l3iwhdylkcwy/CloudyG2.zip?dl=0 Enjoy!
Click to expand...
Click to collapse
Thanks! But your account is overloaded by traffic :3
Well it's okay it doesn't matter as I already found the hard drive containing my CloudyG2 Backup recently and the backup was like years ago XD
Updating OP...
Well, if you want more up to date framework, here's the link: https://www.androidfilehost.com/?fid=24499762636001056
Just a little update here...
LG's framework seems to be properly named... their code's easy to track... LGCamera are disassembled... LGMemo are disassembled, LGMemo too... Maybe if I could just find "where" the hidden framework are ahahahhaha
So I will start porting the framework for running the most important!
STOCK LGCamera... (lemme re-emphasize ) "Stock" not ported LGCamera with all functions working
I already seen its possible since all codes are exposed... and native libraries are easy to modify too
Guys... we're seeing so much light here ahahahah
EDIT: BANG!!! Gotcha!!!
Code:
android.media.action.IMAGE_CAPTURE_OEM_MODE
xxoscarxx28 said:
Just a little update here...
LG's framework seems to be properly named... their code's easy to track... LGCamera are disassembled... LGMemo are disassembled, LGMemo too... Maybe if I could just find "where" the hidden framework are ahahahhaha
So I will start porting the framework for running the most important!
STOCK LGCamera... (lemme re-emphasize ) "Stock" not ported LGCamera with all functions working
I already seen its possible since all codes are exposed... and native libraries are easy to modify too
Guys... we're seeing so much light here ahahahah
EDIT: BANG!!! Gotcha!!!
Code:
android.media.action.IMAGE_CAPTURE_OEM_MODE
Click to expand...
Click to collapse
i really hope so thats what keeping me from going aosp. :good:
That's what's keeping all of us from going to AOSP, but as far as I know, this is not possible.
It's just not all open source.
Sent from my LG-D802 using Tapatalk
xxoscarxx28 said:
Just a little update here...
Click to expand...
Click to collapse
All our hopes are with you lol :fingers-crossed: keep us updated
If you are trying to port the camera and all the framework, you migh aswell have a look into the "advanced binaries 2.0.0" which XCAM uses that are ported from G Pro 2 LP 5.x.x. They seem to give overall better quality and you can get them as a .zip from the OT.
Keep us updated ^^
rdNNNN said:
If you are trying to port the camera and all the framework, you migh aswell have a look into the "advanced binaries 2.0.0" which XCAM uses that are ported from G Pro 2 LP 5.x.x. They seem to give overall better quality and you can get them as a .zip from the OT.
Keep us updated ^^
Click to expand...
Click to collapse
Dude, he's using a backup from CloudyG2 which already has an advanced camera driver.
Just a little clarification here... Even though a software is closed source, that doesn't mean you can't port it...
It is also open source... but in a hideous way Nothing can stop someone dedicated
And also that's why there are such a thing called "disassembly" and cross-referencing binaries ("diff" in short?)
Remember... someone already did port stock (Oxygen OS) camera binaries to CM for Oneplus One
I just realized that the framework used between Kitkat and Lollipop are so different... Ghash XD
But the function is pretty same, just refactored, and some are stripped out... Focusing now on just CloudyG2 3.3's framework...
Btw... does anyone here knows how to know the name of a library? XD
There is a library that LG Camera API uses which is named "hook_jni" in java interface but what *.so might it be looking? Who is "hook_jni"? Does anyone know?
Doing the lords work, sir!
For those who wants to be on the bleeding edge, you can have one now
But I can't ensure anything with this hyper alpha, stability, function, and safety... All of it is not assured... I haven't tried it also XD
Pm me if you want to try it
Wow u are amazing. Pls tell us if u try it
xxoscarxx28 said:
For those who wants to be on the bleeding edge, you can have one now
But I can't ensure anything with this hyper alpha, stability, function, and safety... All of it is not assured... I haven't tried it also XD
Pm me if you want to try it
Click to expand...
Click to collapse
Lollipop/Marshmallow/Doesn't matter?
YoDevil said:
Lollipop/Marshmallow/Doesn't matter?
Click to expand...
Click to collapse
As of now... only for CM13 as it is already a good base to start with and it is already CAF which means their software is already surpassing the qualities of an OEM one, but as always... OEMs have something we don't have :3
lollipo said:
Wow u are amazing. Pls tell us if u try it
Click to expand...
Click to collapse
Nope, I won't try it XD as I am pretty sure that it will cause havoc to CMSDK and to our precious SystemUI. I'll try it in a later stage
Those that already downloaded the alpha... I already tested it and it won't flash XD
And yeah I will let it now on the wilds (people demanded it so here it is now)... Its still the same software I just fixed updater error 6 (it was a syntax error, my bad)
[size=+2]Flash at your own risk, Haven't tested it yet, and is for CM13 only, MAKE NANDROID BACKUPS FIRST[/size]
LG Framework Fixed v0.01
EDIT: News here again, I tested it and then did another pass to the codes and my predictions are correct... I missed the permissions for executing the API inside so its like its worthless... but because LG seems to be exposing things too much, it seems that permissions are laid somewhere in /system/etc/permissions... @Startrek852 ???
Another news... It booted just fine testing for bugs but i think it booted fine because the whole framework is not allowed to execute ahahahha, will release again once this mess is fixed
RR-L (no cam)
https://onedrive.live.com/redir?resid=A8E8D2CE3C5C608!15015&authkey=!ACVNYTN7eKOiMpw&ithint=file,zip
install it as usual, in TWRP...wipe system/data/cache...install .zip
(NFC drains the battery and doesn't work, uninstall it with some of the root uninstallers)
??
andres_vlc said:
??
Click to expand...
Click to collapse
ummm sorry for no more description
ResurrectionRemix ROM for D2303, camera doesnt work
quake73 said:
RR-L (no cam)
https://onedrive.live.com/redir?resid=A8E8D2CE3C5C608!15015&authkey=!ACVNYTN7eKOiMpw&ithint=file,zip
Click to expand...
Click to collapse
Ok what about trying to fix some bugs this time? You do a great job building all these roms but you dont actually test or do proper "porting",I'll try to help!
I assume you use this kernel https://github.com/SonyAosp/kernel/commits/lp-5.1 and everything with the lp-5.1 tag...
1)NFC not working
You patch your sources properly like sony says in it's official guide,search the ROM's github to see if they use custom frameworks,hardware layers etc..you have to patch some things up to get everything working!
Also you have to change some things in device configuration (like the NFC hal name )
You can edit the post and explain the bugs and known issues
how to install? etc etc
Konstantinosj77 said:
Ok what about trying to fix some bugs this time? You do a great job building all these roms but you dont actually test or do proper "porting",I'll try to help!
I assume you use this kernel https://github.com/SonyAosp/kernel/commits/lp-5.1 and everything with the lp-5.1 tag...
1)NFC not working
You patch your sources properly like sony says in it's official guide,search the ROM's github to see if they use custom frameworks,hardware layers etc..you have to patch some things up to get everything working!
Also you have to change some things in device configuration (like the NFC hal name )
Click to expand...
Click to collapse
oh man, i dont patch anything...except a few minor things, this really goes smooth like knife through butter
i admit, cm isnt working (12/13), pac6, rr6, with Benevolent and with Sony vendor files...
honestly, i dont care about nfc (ok, a working camera would be nice but thats out of my league)...i just share what i built, roms that are acceptably ok, noone shared a rom since 11.2015 so, here are some toys to play with
quake73 said:
oh man, i dont patch anything...except a few minor things, this really goes smooth like knife through butter
i admit, cm isnt working (12/13), pac6, rr6, with Benevolent and with Sony vendor files...
honestly, i dont care about nfc (ok, a working camera would be nice but thats out of my league)...i just share what i built, roms that are acceptably ok, noone shared a rom since 11.2015 so, here are some toys to play with
Click to expand...
Click to collapse
So you share a rom that can work better and you dont care to fix it?! Man..i remember you saying "I wanna learn more about the build system and how android is built" what happened?!
Konstantinosj77 said:
So you share a rom that can work better and you dont care to fix it?! Man..i remember you saying "I wanna learn more about the build system and how android is built" what happened?!
Click to expand...
Click to collapse
)))....I havent reached that stage yet
and, if you ask me...the latest Sony software is the best rom for our phones.
nice work bro..but on your file just boot.img,system.img and userdata.img how to success instaal via trwp bro?
Konstantinosj77 said:
So you share a rom that can work better and you dont care to fix it?! Man..i remember you saying "I wanna learn more about the build system and how android is built" what happened?!
Click to expand...
Click to collapse
Do you know of any tool that thedevelopers use? Right now, all that I use is a text editor and google search for eliminating errors. Some kind of an IDE, that would make navigating the source code easier?
Omg RR rom [emoji38] but look you cant make camera work,i will wait until it work )
Sent from my D2305 using XDA-Developers mobile app
Nfc not work. Led not work
andres_vlc said:
Nfc not work. Led not work
Click to expand...
Click to collapse
true, corrected my first post, notified about nfc
Quake73 look Pm pls
quake73 said:
Do you know of any tool that thedevelopers use? Right now, all that I use is a text editor and google search for eliminating errors. Some kind of an IDE, that would make navigating the source code easier?
Click to expand...
Click to collapse
I don't know anything android specific,but a good IDE is geany
BTW i use a text editor too (pluma)
I'm syncing sources right now (using the lollipop5.1 branch of rr) hope we use the same
Let's focus on this ROM for a while
Konstantinosj77 said:
I don't know anything android specific,but a good IDE is geany
BTW i use a text editor too (pluma)
I'm syncing sources right now (using the lollipop5.1 branch of rr) hope we use the same
Let's focus on this ROM for a while
Click to expand...
Click to collapse
yeah, it is on my phone right now, seems good, gave up AOKP, had to give up of some rom, I had too many on my disk. But replaced it with aosp from SonyAosp. (its uploading right now, aosp6)
i use gedit as my IDE
So ok, you mentioned something about fixing the roms that i'm posting. What exactly should i do, what to look for? Performance, light/proximity sensors?
Are some of those .so files from the stock rom (that should be in the vendor folder) + stock kernel the key to making camera, sensors etc. work in any rom?
quake73 said:
yeah, it is on my phone right now, seems good, gave up AOKP, had to give up of some rom, I had too many on my disk. But replaced it with aosp from SonyAosp. (its uploading right now, aosp6)
i use gedit as my IDE
So ok, you mentioned something about fixing the roms that i'm posting. What exactly should i do, what to look for? Performance, light/proximity sensors?
Click to expand...
Click to collapse
For GPS,sensor was not working on DU6 you uploaded,the reason is that you didn't patch it like this https://github.com/omnirom/android_hardware_qcom_gps/commit/2b112bb17f7a76247d135bcae6ae87e56f4ec054
For performance,I've seen ZRAM commit on sony's github,I'll try it today and post the results
NFC works on Lollipop roms (dont try on MM it needs a new blob) but you have to use the correct naming in the device config (libnfc-brcm.conf)
Omni6 uses
Code:
NCI_HAL_MODULE="nfc_nci"
but CM12.1
Code:
NCI_HAL_MODULE="nfc_nci.pn54x"
(I'm not sure on that... @galaxyfreak knows for sure)
quake73 said:
Are some of those .so files from the stock rom (that should be in the vendor folder) + stock kernel the key to making camera, sensors etc. work in any rom?
Click to expand...
Click to collapse
Yes but it's not that simple,you have to use CAF frameworks too
Konstantinosj77 said:
For GPS,sensor was not working on DU6 you uploaded,the reason is that you didn't patch it like this https://github.com/omnirom/android_hardware_qcom_gps/commit/2b112bb17f7a76247d135bcae6ae87e56f4ec054
For performance,I've seen ZRAM commit on sony's github,I'll try it today and post the results
NFC works on Lollipop roms (dont try on MM it needs a new blob) but you have to use the correct naming in the device config (libnfc-brcm.conf)
Omni6 uses
Code:
NCI_HAL_MODULE="nfc_nci"
but CM12.1
Code:
NCI_HAL_MODULE="nfc_nci.pn54x"
(I'm not sure on that... @galaxyfreak knows for sure)
Click to expand...
Click to collapse
as for the performance, all the roms seems pretty smooth (LP & MM). As for the NFC, because I dont care about it, I dont even think about it, I just uninstall it on the first boot (maybe i should even remove it from the manifest)
One thing I noticed is that all of the roms lack the proximity and light sensor, i dont know if it is a kernel issue or maybe device tree/hardware issue (sorry, i still struggle with the terminology...device tree is the device/sony/eagle, right? under vendor folder are prebuilt 'blobs', something analogous to .dll files in windows?)
And about that Omni/CM naming, where did you find that info, I even read some info for qcom/arm/cortex, the cpu/hardware things (seemed too much to me), does one need to know the details of the inner workings of the phone's hardware in order to fix bugs?
quake73 said:
as for the performance, all the roms seems pretty smooth (LP & MM). As for the NFC, because I dont care about it, I dont even think about it, I just uninstall it on the first boot (maybe i should even remove it from the manifest)
One thing I noticed is that all of the roms lack the proximity and light sensor, i dont know if it is a kernel issue or maybe device tree/hardware issue (sorry, i still struggle with the terminology...device tree is the device/sony/eagle, right? under vendor folder are prebuilt 'blobs', something analogous to .dll files in windows?)
And about that Omni/CM naming, where did you find that info, I even read some info for qcom/arm/cortex, the cpu/hardware things (seemed too much to me), does one need to know the details of the inner workings of the phone's hardware in order to fix bugs?
Click to expand...
Click to collapse
I won't argue with you on the NFC thing I just like to have things-features working if they can work
You are correct on the terminology.Also you have to know at least how each rom works,HAL naming,flags etc
The AOSP project has simplified building and porting to new roms like A LOT! Only minor things have to changed each time...
BTW,syncing almost done...can you plz share the local manifest/sources you used for build rr-lp?
Konstantinosj77 said:
I won't argue with you on the NFC thing I just like to have things-features working if they can work
You are correct on the terminology.Also you have to know at least how each rom works,HAL naming,flags etc
The AOSP project has simplified building and porting to new roms like A LOT! Only minor things have to changed each time...
BTW,syncing almost done...can you plz share the local manifest/sources you used for build rr-lp?
Click to expand...
Click to collapse
NOOOO, NO WAY, OF COURSE NOT, THEY ARE MINE, THEY ARE PROPRIETARY!!!!
(ok ok here it is)
i experiment a lot but this is the manifest i used during building the posted RR5 rom. I'm not even sure if I need those qcom/common, media, display etc. Roms seem to build fine without them. SonyCM has some Init, I have no idea if it helps, as you can see, i'm just building blindly but it works
as you could see with pacrom, it is messy....the second half is remove-project, to help sync less (also use "repo sync ..... --depth=1", it helps a lot to keep the source at minimum)
And what do you think, is there a chance for the camera working in a MM rom since there isnt even a sony stock MM rom for M2? Or should we consider changing the phone?
Hello guys,
This is a project I was working on for a kernel for our SGY.
I made it with a few things in mind:
>Improve it's performance
>Be universally compatible (after I nearly given up on trying to get a snappier CM11 and after the need for a snappier SGY, I decided to go back to GB. However, BML is terrible, and it is annoying to come back to. I decided to build a MTD kernel for Gingerbread then, and it works!)
>Experiment and upgrade as much as I can (thanks @robcore!!!!)
But since I lost my device, I cannot continue developing it. I am then releasing the source code (sorry, no flashable stuff, I deleted it long ago ) for any of you to continue(?) my work if your heart so desires.
If I ever get myself another SGY (or another BCM21553 device), I will gladly continue development (and support whoever does it too), but before I lose all my data and the kernel code alongside it, I am making it available.
This kernel features:
-OC up to 1040MHz (It's questionable even today if the bcm21553 OCs really work, but I tried hacking a way that works very similarly to MarocOS's one, maybe even better. Be warned though, the source around it is messy)
-GPU hacks for performance (Again, even I don't know if they do work, probably the values are just there to be seen, I'm not sure. I do know though that increasing the CPU speed will much likely increase the speed of V3D too)
-DVFS disabled (I found out DVFS is mostly the culpirit in the "832MHz crisis" where the kernel would forcefully scale itself to 832MHz, so I eliminated any reference to it in kernel code. Apparently DVFS on the processor is only available under the bcm21553 governor, but it is present on the other drivers as well. The idea for disabling DVFS came from my friend @robcore)
-A few additional governors and a buggy interactive governor (which is the default xd)
-MTD support for Gingerbread (Thanks Samsung Epic 4G! Although it only works on TouchWiz (I tried it with SL v2 and v2.1 and it works, but under NougatME(CM7) I got no success and loads of segfaults), it works ALMOST perfectly. See bugs for details )
-Some scraped source code from Samsung's FSR I found on the internet (barely compilable, though)
Bugs:
>Gingerbread version:
-IMEI won't appear in the Status screen, I also faced problems with non-working radio for calls. Data works just fine, but calling and receiving calls is unavailable. I believe it is EFS-related. My suggestion is backing up the EFS partition's file structure, then converting it to MTD, then restoring the backup.
-TWRP will crash and panic when exiting, a workaround is force rebooting
>ICS version:
-TWRP will crash and panic when exiting (I believe fixing it here will fix the bug above too)
>KitKat version:
-Flashing images fail randomly, you may also be unable to reboot normally if you do so. I tried addressing this but I couldn't get anywhere.
DOWNLOAD THE SOURCE: Here!
Thanks to:
@robcore - his development on the Snapdragon S4 breathes life on my dev soul!
@zman0900 - I saw his thread on an MTD TW kernel for the Samsung Epic 4G, which led me to believe MTD on GB is possible.
nice kernel
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
vdhero said:
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
Click to expand...
Click to collapse
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Building and fixing
sonickles9 said:
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Click to expand...
Click to collapse
I don't sure so I decided to build a kernel from your source and another cm9 version from Mohamad.Afaneh's source and I'll merge the audio on both of them for the best think to fix the bug.Thank you .
Link for kernel?
(img files...)(stock/cm9/cm11)
TheRealModder said:
Link for kernel?
(img files...)(stock/cm9/cm11)
Click to expand...
Click to collapse
Compile one for yourself,man. It only takes like 15-25 mins
vdhero said:
Compile one for yourself,man. It only takes like 15-25 mins
Click to expand...
Click to collapse
I don't know how to compile....
TheRealModder said:
I don't know how to compile....
Click to expand...
Click to collapse
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
vdhero said:
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
Click to expand...
Click to collapse
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
TheRealModder said:
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
Click to expand...
Click to collapse
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Sent from my Zenfone 2 Laser using XDA Labs
TheRealModder said:
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Click to expand...
Click to collapse
zlimage? We don't have that here, we only have boot.img for kernel
vdhero said:
zlimage? We don't have that here, we only have boot.img for kernel
Click to expand...
Click to collapse
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
TheRealModder said:
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
Click to expand...
Click to collapse
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
vdhero said:
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
Click to expand...
Click to collapse
Ok. If you want to install linux i recommend using ubuntu or linux mint.
Ubuntu official website:https://www.ubuntu.com/
Linux mint official website:https://linuxmint.com/
Sent from my Zenfone 2 Laser using XDA Labs
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
vdhero said:
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Click to expand...
Click to collapse
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Assabtigle said:
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Click to expand...
Click to collapse
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Be fast bro!!
vdhero said:
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Click to expand...
Click to collapse
BE fast BRO Love U and Your WORK!!
All Your DEVELOPMENT are Faster than The ORIGINAL one Please Buy a NEW one!
and Yeah install the Stock Rom in your Phone by ODIN it will be fine!:laugh:
The DTS Port has been released publicly is available from the following link:
https://forum.xda-developers.com/android/software/port-dtsx-ultra-dts-headphonex-t3896233
There are kernel patches still necessary (for both ports) and the new guide is here:
https://gitlab.com/dts_project/intro/blob/master/README.md
Used msm8998 for sdm660. Seems to be working fine so far. Thanks.
How to get it?
How to install on SD821?
Oneplus3T?
Actually we haven't released the kernel and stuff, yet. I'm working with those guys on it and we have a first beta Kernel running on my device, which is also a OP 3t. By now, it will be just for OxygenOS Oreo.
Gauravlonkar said:
How to get it?
How to install on SD821?
Oneplus3T?
Click to expand...
Click to collapse
OP3/T is MSM8996. Just pick the commits into your kernel source.
We are actually changing some stuff to get this fully running. We have already one kernel DTS eagle is fully working. Hopefully more devs will implement the driver.
Thanks for posting and porting this!
I know you guys are still working on fleshing out the commits for this, but as-is on the OP3 I needed to make a change in order for it actually compile the new dts_eagle_drv.o module and work:
https://github.com/holyangel/OP3/commit/c8b84a701fdcf82dc725beaaa40f740b13e84f7a
Basically was missing sourcing the dts_eagle/Kconfig file in drivers/misc/Kconfig, and had to remove the 'depends on CONFIG_SND_SOC_QDSP6V2' as i'm its not seeing that option during build time.
Once that was done it compiles and works great :good:
HolyAngel said:
Thanks for posting and porting this!
I know you guys are still working on fleshing out the commits for this, but as-is on the OP3 I needed to make a change in order for it actually compile the new dts_eagle_drv.o module and work:
https://github.com/holyangel/OP3/commit/c8b84a701fdcf82dc725beaaa40f740b13e84f7a
Basically was missing sourcing the dts_eagle/Kconfig file in drivers/misc/Kconfig, and had to remove the 'depends on CONFIG_SND_SOC_QDSP6V2' as i'm its not seeing that option during build time.
Once that was done it compiles and works great :good:
Click to expand...
Click to collapse
Take a look at the repo. @LazerL0rd force pushed new commits with the fix.
Will this work on SD625??
using this on hima "LineageOS 15.1 Unoffical" and "AICP 13.1 Official". Works great so far!
crian said:
Take a look at the repo. @LazerL0rd force pushed new commits with the fix.
Click to expand...
Click to collapse
yep builds now by itself without my commit :good:
HolyAngel said:
Thanks for posting and porting this!
I know you guys are still working on fleshing out the commits for this, but as-is on the OP3 I needed to make a change in order for it actually compile the new dts_eagle_drv.o module and work:
https://github.com/holyangel/OP3/commit/c8b84a701fdcf82dc725beaaa40f740b13e84f7a
Basically was missing sourcing the dts_eagle/Kconfig file in drivers/misc/Kconfig, and had to remove the 'depends on CONFIG_SND_SOC_QDSP6V2' as i'm its not seeing that option during build time.
Once that was done it compiles and works great :good:
Click to expand...
Click to collapse
sound/soc/msm/Kconfig
14:config SND_SOC_QDSP6V2
It's there alright. I fixed the other issues with a force-push btw.
@Claymore1297 @crian @HolyAngel another update has been pushed - I've joined the normal naming and folder placement scheme of the Linux Kernel and therefore have decided to move the Kconfig and dts_eagle folder to under drivers/misc/qdspv2 (well the Kconfig was added to drivers/misc/Kconfig as there is no child Kconfig for this folder)
shanks125 said:
Will this work on SD625??
Click to expand...
Click to collapse
There's no way you will know except you test it yourself. Pick 8996 commits, btw.
Sent from my Redmi Note 4 using XDA Labs
Do we need any application for controlling it?
NATO66613 said:
Do we need any application for controlling it?
Click to expand...
Click to collapse
Need, not really. Should have, yes. The module for that still isn't public yet because it's in beta. Join the ICESOUND group on TG for an show public version.
Kernel stuff works tho.
I'm on Omnidragon, the devs implemented DTS Eagle in kernel. As this an 'always on feature' I was wondering how this works/interferes with mods like v4a or James DSP?
mvn66 said:
I'm on Omnidragon, the devs implemented DTS Eagle in kernel. As this an 'always on feature' I was wondering how this works/interferes with mods like v4a or James DSP?
Click to expand...
Click to collapse
Works fine, it's just an addition to the many audio effects Android has. The kernel stuff is just a backend and allows it to be integrated deeply into the system.
LazerL0rd said:
Need, not really. Should have, yes. The module for that still isn't public yet because it's in beta. Join the ICESOUND group on TG for an show public version.
Kernel stuff works tho.
Click to expand...
Click to collapse
Can't find it can you please send it link
tested and seem working fine with SD435, really interesting sound enhancement.
Thanks