Related
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
rr0yy said:
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
Click to expand...
Click to collapse
My issue is now fixed, but in a hard way. Formatted the secondary SD card partition, and then Link2SD automatically recognized it. All the apps are gone, but at least I got the secondary partition active. Spent another half-hour downloading all the needed apps again from the Play store.
Link2Sd not working for me on CM10.1 Rom
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
adcool2007 said:
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
Click to expand...
Click to collapse
Hi
І have also had the problem.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
format ext2 or ext4.
Run Link2sd
Apparently there was no room in the system or chmod / chown
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
rishabhgangwar said:
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
Click to expand...
Click to collapse
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
I also had problems with link2SD.
piavia said:
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
Click to expand...
Click to collapse
Thanks a lot man Pavai
u save me ....:victory:
The standard and not-really-necessary idea of doing a factory-reset wipe when flashing is the problem here. I also had that zong my sdext making it read-only and nothing, nothing except re-partitioning the sdcard helped.
not working !
hi ! I have a problem , I've tried to partition sd card with cwm, minitool partition , tried ext 2,ext 3 , ext 4 , flash again ROM , install first link2sd , recreate mount scripts every time i change the method but no matter what i do , it keep telling me that the 2nd partition is not mounted and wont let me recreate mount script . ( Mount script cannot be created ) . If anyone can help me , i'll very much appreciate . Thanks !
LG P500 , CM10.1
Edit : Got it to work with CM7 .
Link 2 sd second partition is removed after installing a new custom ROM , help plz
Hi, Link 2 sd second partition is removed after installing a new custom ROM , (i lost my 2gb) how to fix it ??? how can i get my second partition storage back ? Please help me out
You can open menu on link 2 sd, and in the "more" section, click 2 re-link libraries and re-link files.
Sent from my LG-P500 using xda app-developers app
HELPPP
i used link2sd and i deleted something and all of a sudde the network disappeared after restarting when i go to mobile networks it says THIS OPTION DOES NOT SUPPORT CURRENT ROM... help pls asap.. **** i regret it so much
---------- Post added at 11:32 AM ---------- Previous post was at 11:18 AM ----------
I deleted something probably dialer with LINK2SD and now my mobile network doesnt work when i do to the settings it says THIS OPTION DOES NOT SUPPORT CURRENT ROM.. please help asap..
hashdoom said:
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hi, you can do one of these things, by adb shell run e2fsck -fpDC0 /dev/block/mmcblk0p2 to your second partition or using gparted run a full check of second partition of your SD card in a computer card reader, after that will work. I have the same problem, but in my case i have to do this procedure EVERY DAY because at next start the read only problem starts over... ANY BETTER SOLUTION APRECIATED !!!
After factory reset, I had a read-only ext4 partition. Had to start over.
Common cause of link2sd not creating its mount scripts is too little room on /system. Try adb shell df | grep system. Need a few meg. If this be the problem, need to trim the ROM.
Can,t understand ... How to Do it In Micromax A27...in custom Rom
tell me how to do it in Micromax A27 in custom Rom Dreamboltxv2
A lot of separate issues here and in various threads:
1. Sd-ext read only after factory reset. I never do that. Had that very thing happen. Save all data from partitions to computer, repartition and copy it back.
2. Not enough room on system to process/form mount script. JB and onward, ROMs need trimming. > 3meg needed, 9meg should be plenty.
3. No room on data. Link2sd can still work and fix that. If sdext can be mounted, that is ... and a launcher can live long enough to get to lin2sd and start it!
4. Other errors creating the mount script. I am now getting "device busy ... maybe ext4 not supported ... try vfat ... etc." Ext4 is supported. I have a copy of the script which I can place myself.
5. Data integrity problems in Kitkat based ROMs. Repeated recreation of dexes on data, using it up (Link2sd's Achilles heel). Sometimes, recreating that script can stop this. If one can get it re-created. Issues 3, 4. Link2sd can get the space back, problem is keeping it.
I have raised the issues with Link2sd authors.
Hi,
first of all sorry for my english.
I like very much your app. I use your app in all phones. When a friend asks me how can he boost his phone, i suggest him to install link2sd because is the only app that move all apps into external sd.
But i have a problem. In my phone, when i have upgrated to KitKat version of Andoid, Link2sd doesn't work with the second partition. I've tried to format the second partition in ext2, and Link2sd said me that "script cannot be created".
I've tried to format the second partition in ext3, but it was the same. I've tried to format the second partition in f2fs, but it was the same.
Only in ext4 Link2sd can create the script and it can see the second partition!!
But when i link an app to the second partition, it doesn't and say me "reboot the phone".
When i've rebooted the phone, the app that i've linked is corrupted.
I researched on internet and it seems that is a problem of Kitkat that prevent to write in the external storage. So i've resolved this problem with this tutorial --> http://forum.xda-developers.com/showthread.php?t=2524277
But Link2sd still does not work....
My device name is: 706v92_jbla_fhd
Finally, i want to say that with Jelly bean version of Android, Link2sd was perfect and it worked very well. Now, with Kitkat Android, i cannot link apps to second partition!!
What can i do??
gioriccio92 said:
What can i do??
Click to expand...
Click to collapse
Hi there,
For these problems go to app thread and ask the developer:
[APP][1.6+] Link2SD
Or ask in the right Q&A forum here: > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello,
after googling a lot and trying so many sugestions to fix my problem, I decided to ask for your help here!!
I rooted my android using kingo root.
After this, I partitioned my 32 Gb SD Card into 2 partitions (1st FAT32 and 2nd as EXT4, both as primary) using Mini Tool Partition and following a tutorial guide in rootmyandroid.org.
I changed the configuration of superSU to "enable SU during boot".
Installed the Link2SD granting root access. Change configuration of Link2SD to "relink libraries during boot" and "relink dex during boot". Choose EXT4 for 2nd partition and after rebooting, it seems that worked. When I see the "storage information" it shows "SD card 2nd Part" in /data/sdext2.
But, when I created a link to an app and rebooted, it simply disappeared. Is weird because using a terminal emulator, I accessed /data/sdext2 and his apk was there. I also could create a dir there for testing.
I tried to make the Link2SD a system app (mv /data/app/com.buak.Link2SD-1.apk /system/app/com.buak.Link2SD-1.apk), but this error messagen was shown: "failed on '/data/app/com.buak.Link2SD-1.apk' - Cross-device link".
I saw the suggest to remove the scripts 05mountsd and 11link2sd from /etc/init.d, but my android doesn't have this directory.
So, what did I forget?
Configuration:
Mobile phone: THL 5000 (it's a chinese model)
android version: 4.4.2
kernel version: 3.4.67
version number: thl.5000.007D.20140928.KK.FHD.EN.COM.16P128_MT6592T_V1.1.0
I thank in advance for all help, and sorry for my english or if I forgot something
XDA Visitor said:
Hello,
after googling a lot and trying so many sugestions to fix my problem, I decided to ask for your help here!!
I rooted my android using kingo root.
After this, I partitioned my 32 Gb SD Card into 2 partitions (1st FAT32 and 2nd as EXT4, both as primary) using Mini Tool Partition and following a tutorial guide in rootmyandroid.org.
I changed the configuration of superSU to "enable SU during boot".
Installed the Link2SD granting root access. Change configuration of Link2SD to "relink libraries during boot" and "relink dex during boot". Choose EXT4 for 2nd partition and after rebooting, it seems that worked. When I see the "storage information" it shows "SD card 2nd Part" in /data/sdext2.
But, when I created a link to an app and rebooted, it simply disappeared. Is weird because using a terminal emulator, I accessed /data/sdext2 and his apk was there. I also could create a dir there for testing.
I tried to make the Link2SD a system app (mv /data/app/com.buak.Link2SD-1.apk /system/app/com.buak.Link2SD-1.apk), but this error messagen was shown: "failed on '/data/app/com.buak.Link2SD-1.apk' - Cross-device link".
I saw the suggest to remove the scripts 05mountsd and 11link2sd from /etc/init.d, but my android doesn't have this directory.
So, what did I forget?
Configuration:
Mobile phone: THL 5000 (it's a chinese model)
android version: 4.4.2
kernel version: 3.4.67
version number: thl.5000.007D.20140928.KK.FHD.EN.COM.16P128_MT6592T_V1.1.0
I thank in advance for all help, and sorry for my english or if I forgot something
Click to expand...
Click to collapse
Hmm ... not sure what the issue is here.
I recommend to check this thread about your device: THL 5000 OctaCore MTK6592T,ROOT,RECOVERY.
There you may get a clue.
There seems to be at least one user with working link2SD moved system apps: Post #164.
If you register on xda, you can post in the thread, or send him a PM.
Here are some useful threads about link2SD in general:
Using Link2SD Most effectively for Android Phones
[LINK][GUIDE]Link2SD
[GUIDE] [FAT32] [EXT2] [2.3+] How to Partition your Android MicroSD Card
Good luck !
Thread closed. Thank you.
Hi guys
I have a little problem and maybe some of you also have it.
First i own a xt1541 8GB
On Lollipop i use link2sd (payed app) and i'm very happy.
Now on MM i cannot use it cause it cannot make mount point. allready tried with apps2sd but on reboot it wont work again.
Also on MM external sdcard is no longer sdcard1 but something like xxxx-xxxx. Tried create a symlink with name sdcard1 pointing to xxxx-xxxx but on reboot the symlink is erased.
I saw this kind of trick on Huawei honor 4c marshmallow stock rom.
With that symlink link2sd shows me sdcard space available, thing that without it it shows nothing.
Does anyone has a solution for this?
same here
Same here I can't make it to work on marshmallow.
Adaptable storage option build in the system really needs work. It still uses internal storage anyway causing problems when too much apps installed.
Probably a solution
Hey, I had the same problem as you, but I think that I solved this... at last in my phone. I don't know if it will work for you too and I'm not capable of explain details, since I'm new in this world of rooted cellphones, but I'll try my best.
First I tried another similar app called App2sd to check if it was a problem with my phone or with Link2sd only. And that app properly mounted the 2nd partition of my sd card. After that I opened Link2sd and my 2nd partition was mounted there too. But after rebooting the system, Link2sd was not working again, my sd was not mounted. I understood that Link2sd was having a problem in mounting my card at boot. Then I remembered that I read here in another forum (androidforums.com) that Link2sd need that your cellphone has init.d support to work. I donwloaded an app called Universal init.d and tested if my cell has that support, and it has. That app has an option of automatic execute scripts at each boot if you turn it ON, then I did it. Now Link2sd is working 100%. Sorry about the poor explanation, but I hope that it can help someone.
Danylyca said:
Hey, I had the same problem as you, but I think that I solved this... at last in my phone. I don't know if it will work for you too and I'm not capable of explain details, since I'm new in this world of rooted cellphones, but I'll try my best.
First I tried another similar app called App2sd to check if it was a problem with my phone or with Link2sd only. And that app properly mounted the 2nd partition of my sd card. After that I opened Link2sd and my 2nd partition was mounted there too. But after rebooting the system, Link2sd was not working again, my sd was not mounted. I understood that Link2sd was having a problem in mounting my card at boot. Then I remembered that I read here in another forum (androidforums.com) that Link2sd need that your cellphone has init.d support to work. I donwloaded an app called Universal init.d and tested if my cell has that support, and it has. That app has an option of automatic execute scripts at each boot if you turn it ON, then I did it. Now Link2sd is working 100%. Sorry about the poor explanation, but I hope that it can help someone.
Click to expand...
Click to collapse
Thanks. I will try again just like you said. I'll post results
tried with apps2sd and after link2sd works. but i keep apps2sd also installed.
Hi,
thanks lloco73.
Recently I have updated My Note4 T-Mobile to custom ROM with Maximum_OvrDriVE_MM_v2.1 (MarshMallow 6.0.1)
and I have use the "Apps2SD PRO All in One Tool v8.0.apk" file to solve All my problem like Link2SD and Folder Mount.
Thanks Again and sorry for NOTE4 Post.
THX!
anielkumar said:
Hi,
thanks lloco73.
Recently I have updated My Note4 T-Mobile to custom ROM with Maximum_OvrDriVE_MM_v2.1 (MarshMallow 6.0.1)
and I have use the "Apps2SD PRO All in One Tool v8.0.apk" file to solve All my problem like Link2SD and Folder Mount.
Thanks Again and sorry for NOTE4 Post.
Click to expand...
Click to collapse
thx dude for helping..:good::good::good::good::good::good::good::good::good::good:
anielkumar said:
Hi,
thanks lloco73.
Recently I have updated My Note4 T-Mobile to custom ROM with Maximum_OvrDriVE_MM_v2.1 (MarshMallow 6.0.1)
and I have use the "Apps2SD PRO All in One Tool v8.0.apk" file to solve All my problem like Link2SD and Folder Mount.
Thanks Again and sorry for NOTE4 Post.
Click to expand...
Click to collapse
where I find this app? in the Pro version of All-in-one?
faoineag said:
where I find this app? in the Pro version of All-in-one?
Click to expand...
Click to collapse
use Apps2SD PRO: All in One Tool - Android Apps on Google Play
https://play.google.com/store/apps/details?id=in.co.pricealert.apps2sd.pro&hl=en
use latest version.
Enjoy
Unfortunately it does not work, the 2 partition cannot be mounted
Link2sd is working with the apps2sd installed and it's partition mount script..
Where is the dev of link2sd?
I've paid to have it working and it isn't.
lloco73 said:
Hi guys
I have a little problem and maybe some of you also have it.
First i own a xt1541 8GB
On Lollipop i use link2sd (payed app) and i'm very happy.
Now on MM i cannot use it cause it cannot make mount point. allready tried with apps2sd but on reboot it wont work again.
Also on MM external sdcard is no longer sdcard1 but something like xxxx-xxxx. Tried create a symlink with name sdcard1 pointing to xxxx-xxxx but on reboot the symlink is erased.
I saw this kind of trick on Huawei honor 4c marshmallow stock rom.
With that symlink link2sd shows me sdcard space available, thing that without it it shows nothing.
Does anyone has a solution for this?
Click to expand...
Click to collapse
"Also on MM external sdcard is no longer sdcard1 but something like xxxx-xxxx. Tried create a symlink with name sdcard1 pointing to xxxx-xxxx but on reboot the symlink is erased."
Has anyone come up with a fix for this annoying problem of sdcard1 getting renamed in mm roms? I notice that not all mm roms do this like Temasek's.
Hi everyone. This is my first thread and i aint any dev. Link2sd is the peoperty of its owner and i am here with just a small fix which is faced by many.
This is a fix to the MOUNT SCRIPT ERROR that is faced by many Link2sd users.
The error is faced while creating mount script, a message pops up [SIZE="5]""mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: device or resource busy"" [/SIZE][/B] or [B][SIZE="5"]""mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: nos uch directory found""[/SIZE]
If you too are facing this problem then here is the fix. The fix wont brick your phone or damage it and result is guranteed. Please follow the below steps.
Before Proceeding further Keep in mind the requirements:-
1. Rooted device
2. Partitioned memory card (First partition to be used for media is to be in Fat32 format and 2nd partition to be used as secondary internal storage is to be in ext4 format (or ext2,ext3 but i prefer ext4) (Refer to any tutorials of partitioning a memory card available on the internet. I prefer to use Minitool partition wizard in a pc.
STEPS
1. Install Link2sd (From market)
2. Install App2sd (from market)
3.Convert Link2sd into System app.
This can be done by installing any app from the market which converts user app into system app. Or follow this steps A) Go to /data/app/com.bauk.Link2SD-1 B)Copy base.apk C) Go to /system/app D)paste the apk E) Rename it to com.bauk.Link2sd-1.apk (Do not create any folder) (You will need a file explorer with root access such as root explorer or es explorer)
4.Restart your phone.
5.Now open App2sd
6. Select Link application (or something like that option)
7. It will ask for mounting scripts. A pop up will occur with options to select.
8. Select the format of the 2nd partition (Ext2,Ext3 or Ext4 preferably) and method is to be selected "Normal" (If available)
9. Click on apply.
10. Restart your phone
11. Open link2sd and click the 3 dots in the top right corner and click on Storage info. If Sd card 2nd partition shows the size then you are good to go.
12. Uninstall app2sd.
13. Done
14. Enjoy
Note:- Name of apps mentioned above such as Link2sd, App2sd, Minitool partition wizard, Root explorer, Es file manager are not my creation and are property of their respective owner.
Thank you
Well... I'll try it out later. Thank you so much for this solution. Hope this works.
Enviado desde mi GT-S5301 mediante Tapatalk
Hi, there are several Apps2SD apps on PlayStore....... Which one is the one to use ?
Thx
UPDATE : Well, the answer to my "Link2SD issue" is : Apps2SD Pro ( note the "s" after App, there are many App2SD apps out there....... so it's " Apps2SD Pro"
With this app I could partition and format my sdcard, create the mount script and move most system and user apps to the sdcard. However, the developer does not recommend moving any "Google apps" to the sdcard ( I moved Google Drive before I read this and it works fine. Just be careful ! Also, the Pro version does not have ad's and has many, many additional features and this app is updated frequently.
Now I am happy !
tried everithing with this A2107A-H and nothing works my mount path is /dev/block/platform/mtk-sd.1/mmcblk1p2
if i do the same thing what u say everything is ok with partition but it still not shows the storage on storage info and if i try to move to sd card it gives me a java error i restored 3 times my phone and trying 2 days to get it work but it not works im using galaxy s8 plus with nougat and my memory card is exfat im converting it to fat32 and creating an ext2 partition but IT NOT WORKS
NO ONE HAVES A GOOD METHOD FOR THIS PLS SOME ONE SAY ME HOW TO USE THIS APP!?!?!?!?!?!?!?
Thank you very much....!!!
I just tried it and for the moment it works ... we will see how it evolves with the passing of days .... and several "intentional" reboots (verify that the script is not lost).
Again thank you very much, I looked for lost the link2sd on android 7.
Greetings.
This is a Google translation.
Mount Script Cannot be Created
I can't find com.bauk.Link2SD-1 anywhere with ES Explorer nor with the file manager. Tried after installing Link2SD several times still no result.
sarmamanashjyoti2012 said:
Hi everyone. This is my first thread and i aint any dev. Link2sd is the peoperty of its owner and i am here with just a small fix which is faced by many.
This is a fix to the MOUNT SCRIPT ERROR that is faced by many Link2sd users.
The error is faced while creating mount script, a message pops up [SIZE="5]""mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: device or resource busy"" [/SIZE][/B] or [B][SIZE="5"]""mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: nos uch directory found""[/SIZE]
If you too are facing this problem then here is the fix. The fix wont brick your phone or damage it and result is guranteed. Please follow the below steps.
Before Proceeding further Keep in mind the requirements:-
1. Rooted device
2. Partitioned memory card (First partition to be used for media is to be in Fat32 format and 2nd partition to be used as secondary internal storage is to be in ext4 format (or ext2,ext3 but i prefer ext4) (Refer to any tutorials of partitioning a memory card available on the internet. I prefer to use Minitool partition wizard in a pc.
STEPS
1. Install Link2sd (From market)
2. Install App2sd (from market)
3.Convert Link2sd into System app.
This can be done by installing any app from the market which converts user app into system app. Or follow this steps A) Go to /data/app/com.bauk.Link2SD-1 B)Copy base.apk C) Go to /system/app D)paste the apk E) Rename it to com.bauk.Link2sd-1.apk (Do not create any folder) (You will need a file explorer with root access such as root explorer or es explorer)
4.Restart your phone.
5.Now open App2sd
6. Select Link application (or something like that option)
7. It will ask for mounting scripts. A pop up will occur with options to select.
8. Select the format of the 2nd partition (Ext2,Ext3 or Ext4 preferably) and method is to be selected "Normal" (If available)
9. Click on apply.
10. Restart your phone
11. Open link2sd and click the 3 dots in the top right corner and click on Storage info. If Sd card 2nd partition shows the size then you are good to go.
12. Uninstall app2sd.
13. Done
14. Enjoy
Note:- Name of apps mentioned above such as Link2sd, App2sd, Minitool partition wizard, Root explorer, Es file manager are not my creation and are property of their respective owner.
Thank you
Click to expand...
Click to collapse
thanks
thanks sarmamanashjyoti2012
huawei P10 plus custom rom fRomFuture_Genesis_B172_V3.0
Link2sd work now
Doesn't work for me, I get stuck at point 8...
Apps2sd won't load partition due to error: mounting /dev/block/mmcblk1p2 on /data/sdext2
Ag0n1a said:
Doesn't work for me, I get stuck at point 8...
Apps2sd won't load partition due to error: mounting /dev/block/mmcblk1p2 on /data/sdext2
Click to expand...
Click to collapse
Same for me, no new ideas?
Kind of frustrating running out of internal storage.
umtalilives said:
Same for me, no new ideas?
Kind of frustrating running out of internal storage.
Click to expand...
Click to collapse
I used Samsung Galaxy Note 3 N9005 with Resurrection Remix Nougat v5.8.3 with Magisk v12.0 and Dual Boot Patcher.
I had the same problem with Link2SD, got the same error.
The Link2SD developer suggested me to upgrade to Magisk v16.0. I also upgraded to Resurrection Remix Nougat v5.8.5.
This solved the problem with Link2SD at least in my case.
Sent with Tapatalk from my Samsung Galaxy Note 3 SM-N9005
klorinczi said:
I used Samsung Galaxy Note 3 N9005 with Resurrection Remix Nougat v5.8.3 with Magisk v12.0 and Dual Boot Patcher.
I had the same problem with Link2SD, got the same error.
The Link2SD developer suggested me to upgrade to Magisk v16.0. I also upgraded to Resurrection Remix Nougat v5.8.5.
This solved the problem with Link2SD at least in my case.
Sent with Tapatalk from my Samsung Galaxy Note 3 SM-N9005
Click to expand...
Click to collapse
I used to have SM-N9005 but I lost it so for something different , got a moto g4 plus.
I have Magisk v16.0 and lastest RR Nougat.
I was able to get Link2sd to recognize the partition but best I can get is the link to sd function, will not move any apps to sd.
Was wondering if that is just the same as integrating the Ext4 partition as internal?.
Do I need bother with Link2SD if it will not move the apps?.
umtalilives said:
I used to have SM-N9005 but I lost it so for something different , got a moto g4 plus.
I have Magisk v16.0 and lastest RR Nougat.
I was able to get Link2sd to recognize the partition but best I can get is the link to sd function, will not move any apps to sd.
Was wondering if that is just the same as integrating the Ext4 partition as internal?.
Do I need bother with Link2SD if it will not move the apps?.
Click to expand...
Click to collapse
Link to sd works for me, app move does not work, I get error.
Sent with Tapatalk from my Samsung Galaxy Note 3 SM-N9005
klorinczi said:
Link to sd works for me, app move does not work, I get error.
Sent with Tapatalk from my Samsung Galaxy Note 3 SM-N9005
Click to expand...
Click to collapse
Link2SD pro (I bought the licence) doesn't move the apps, but It works with links.
desolli said:
Link2SD pro (I bought the licence) doesn't move the apps, but It works with links.
Click to expand...
Click to collapse
Yes, linking works, but standard app move does not.
Sent with Tapatalk from my Samsung Galaxy Note 3 SM-N9005
cela n'a pas marché pour moi
Why my link2sd force close after mount sd with app2sd and restart?