Related
I have a Nexus 5 32GB that's about 14 month old. Was running Lollipop 5.1 which was installed through OTA updates (4.44 >5.0 >5.01>5.1). The device is stock and unrooted.
One day, after powering the device up, it went into the boot screen and never managed to finsih the boot (for hours).
After reading extensively on this and other forums , here are the steps I tired , without success:
1. Go to bootloader and press Start
2.Go to bootloader , erase cache
3.Go to bootloader erase user data (factory reset).
I then tried to flash the factory image back. I tried all Lollipop versions from the google developers page of factory images.
starting with 5.1.0 (LMY47I) and going down. All flashing was completed successfully, but the problem remains.
Then I tried 4.4.4 (KTU84P) and the device finally booted up, but it was crippled: Most times It only sees a storage of 16GB , the phone does not recognize any cellular carriers, google play crashes, camera crashes, gallery crashes. An error states that "no external memory is available". Basically it was useless.
I took the phone to an LG lab. They said I need to replace the motherboard. Costs about 200$ !!
I was about to get a new phone , but decided to try one more google search for a fix.
This guide is for any poor soul in the same state.
This issue can be solved without replacing the motherboard for 200$.
The problem in my case was that the /persist partition was degraded, and could not mount.
I found out by trying to follow this guide: http://android.stackexchange.com/qu...dots-lollipop-screen-after-hard-factory-reset
I got as far as activating ADB Sideload when I got the error "cannot mount /persist".
This is a software problem.
Her's how to fix it (It's a long and detailed guide - but worth the result):
First, you must enable USB debugging mode , if it was not enabled (if it is enabled you can skip the first step of this guide) . The way to do that is to flash a stock image that will load, even if not fully working. In my case I could flash version 4.4x and get the phone to load. I am not aware of any other way to enable USB debugging, other than from within a working OS. If someone knows a way - please post it.
The easiest way I found to flash my phone is using Julian OS' script. You can download the stock image5.0 and 5.01 with the script from here:
https://www.androidfilehost.com/?w=files&flid=22367
You will need to adapt the 4.4x firmware to have the script flash it, but it's very easy, just a couple of files to rename.
When you open Julian's zip file you will see that he uses a script that flashes the firmware's images one by one. What I did was download the stock images from Google https://developers.google.com/android/nexus/images , used winrar to extracrt all the files from the .tgz file to a folder, then unzip the only zip file there (image-hammerhead-xxxxx.zip) which contains 5 img files. I then renamed the radio-hammerhead-xxxxx.img to radio.img and bootloader-hammerhead-xxxx.img to bootloader.img. Now all the file names comply with Julian's script. From Julian's archive copy the files "From Bootloader.bat" and "fastboot.exe" to the folder where all the images you just renamed are.
Put the phone in bootloader mode (turn the phone off, press the Vol- and the power buttons). Once the the phone is in bootloader mode, connect it to the PC and run "From Bootloader.bat" and follow the onscreen instructions. In about 2 minutes, your phone will be flashed.
Turn the phone on, it should load the OS. Disregard all the error messages, and don't bother setting the phone up. If you skip wifi, and don't have a sim in the phone you can finish the basic setup quickly.
Next you need to get developer tools activated: Settings>about phone>Build number. Tap 7 times on the build number and this will unlock Developer tools. Go back to settings and the new Developer Tools and enable usb debugging. Approve any popups.
*** I am not aware of how to enable usb debugging if you cannot go into the settings. If non of the stock images loads for you, search for a way to get usb debugging working , or else you cannot continue. You need this for ADB to connect to the phone.****
Next, you need to have ADB on your PC, and it should be able to reach your phone. If you already have - then skip to the next step. If you don't - then here is how to get the latest version:
Go here and download the installer https://developer.android.com/sdk/index.html#Other
Install the file and when it's done run SDK manager. Choose only the first 2 tools (Android sdk tools and Platform tools), this will install the latest adb and fastboot tools. To make sure all is installed open a command prompt (Click Start, type cmd in the search and run cmd.exe) and type adb. You should see all the adb possible commands typed. Now you can test if your phone can be reached by adb: connect your phone (remember usb debugging must be on!) and type: adb devices. After a few seconds you should see something like this:
List of devices attached
024703f599cc8feb device
If you get this, it means you have usb debugging enabled and a proper usb driver installed and you can go to the next step . If there is no device in the list you need to install/update the USB driver:
You have to make sure that when you connect your phone with USB debugging on, you have 2 entries in Winodws Device manager:
Under Portable devices >Nexus 5 , and under Android device> Android composite ADB Interface.
If the second one is missing, ADB will not work and you can't continue. There are 2 ways to fix that :
1. You can install an Android driver called Universal Naked Driver 0.73 from here: http://forum.xda-developers.com/showthread.php?t=2386956. Unzip the file to a folder.
The author of that guide states you need to uninstall any driver that already exists. This proved tricky because Windows would not uninstall the Nexus 5 driver. I decided to install it on a PC that has no android driver.
When you connect the phone to a windows 7 pc for the first time it will search for a driver. I disconnected the internet and windows installed a generic driver. In device manager I saw Nexus 5 with a yellow triangle. I Right clicked on it > update driver software > Browse my computer for driver software and point to the folder you unzipped the driver. You will get a warning - allow the installation.
2. If that does not work or if you don't have another "virgin" PC try this:
Run SDK Manager, under Extras mark Google USB driver. You don't need anything else marked. Install the driver.
Now connect your phone to the PC in normal mode (not bootloader!) . Open device manager. You should have two entries: Portable devices >Nexus 5 and Android device > Android Composite ADB Interface
If the second one is missing, but the Nexus 5 is properly installed, Right click on the Nexus 5 device >Update driver software > Browse my computer for driver software >Let me pick from a list. Now make sure that "Show compatible Hardware" is ticked . You should now have an entry called "USB composite device". Choose that and let it install. When it's done, if you still have an an Unknown device >Nexus 5 and no Android Composite ADB Interface in device manager, then unplug the phone and reconnect it again . You should now have both devices installed.
If by chance this does not work, and you have a Nexus 5 with a yellow error , right click it>update software driver> Browse my computer.> and point it to the Universal Naked Driver folder or the SDK>Extras>Google USB driver folder and it should update so both devices appear (Nexus 5 and ADB).
Once adb can see your pohne go here, to read bitdomo's guide to fix the broken persist partition.
http://forum.xda-developers.com/google-nexus-5/general/guide-to-fix-persist-partition-t2821576
There are some prerequisites to getting this to work:
The first one is that the phone can be reached by ADB, this is why you needed the usb debugging mode to be turned on, and the proper usb driver installed.
Second, you need to install a custom recovery image. Don't worry, you will overwrite it later. The one I used is TWRP. Get the latest version from here:
http://techerrata.com/browse/twrp2/hammerhead
To install I recommend you copy Fastboot.exe and the TWRP file to an empty folder on your PC . Rename the TWRP file to "recovery.img". Open a command prompt in the folder (see here if you don't know how http://www.techsupportalert.com/content/how-open-windows-command-prompt-any-folder.htm) , in the black window type: fastboot flash recovery recovery.img and hit Enter. Wait a few seconds and it will finish.
Last, you need to root your device. There are many ways to do this. I did this very simply by downloading CF-Auto-Root from https://autoroot.chainfire.eu/ The file you need is this: https://download.chainfire.eu/363/CF-Root/CF-Auto-Root/CF-Auto-Root-hammerhead-hammerhead-nexus5.zip . Unzip it, put your phone in bootloader, run root-windows.bat.
Now you are prepaired... Follow the guide by bitdomo . Open a command prompt , and run the 2 commands bitdomo wrote. You will get a series of questions , type y followed by Enter until it's all done.
SInce you are still in bootloader mode, and a big START is at the top of the screen, click the power button to reboot. Now your oS 4.4x should load properly. Make sure everything is working.
I did not follow the steps for the wifi and BT fix , because they worked fine (and still do 4 months later) , but you can go ahead and do that too.
Now you can flash to the latest firmware 5.10 - download the file from the developer site I gave before, use Jason Os's script to flash the image, and lock the device. Done! Boot up the device and make sure it recognizes the right amount of RAM on your phone (16 or 32GB). If it does, then all is well .
When I first booted the device , I saw that it only recognized 16GB instead of 32GB. To solve this install TWRP again, go to Wipe>Format data . Then reboot the device and make sure you have 32GB.
If you like the stock recovery instead of TWRP you can use Fastboot to flash the original recovery.img.
Now you have a working Nexus 5 , v5.10.
Thanks to LyricWulf and bitdomo for their life saving guides. I hope this helps others in the same spot, and saves them 200$ .
stuck at unlock step
how u unlock nexus 5 when stuck booplop n cnt go to android screen?alrdy using ths step "fastboot oem unlock" when i reboot for unlock,stuck at bootloop n alrdy w8ing 24hr still bootloop cnt see android home screen...n i go to restart nexus5,n locked again... i just stuck on this place,cnt go to next step..pls help me
sry my englsh so bad
Thanks! Helped me to save my N5!
Do not need to exactly as it is posted but the directions is good!
Thanks again.
killian.1140 said:
how u unlock nexus 5 when stuck booplop n cnt go to android screen?alrdy using ths step "fastboot oem unlock" when i reboot for unlock,stuck at bootloop n alrdy w8ing 24hr still bootloop cnt see android home screen...n i go to restart nexus5,n locked again... i just stuck on this place,cnt go to next step..pls help me
sry my englsh so bad
Click to expand...
Click to collapse
Not sure what your problem is, but if you are stuck at the boot screen (with the colored dots spinning) you might have the smae problem I describe. You can try to go to bootloader and wipe the cache, if that does not help and you don't mind a wiping all your data do a factory reset. , Go to recovery mode (third option in bootloader), then press the powr and vol up buttons together several times until you get into recovery. Then choose what you want to wipe.
If that does not restore your phone you need to follow my guide. Probably your persist partion is degraded and needs to be fixed. If you follow my guide you will find out what your problem is.
Good luck
Or just read the stickies.
I had the same problem, and for me, simple NAND restore from TWRP recovery solved this issue. I recently made this NAND backup for no reason and it happens to be a very good move. Cheers
Thank you so much for this! You saved my phone!
volvoxxda said:
I had the same problem, and for me, simple NAND restore from TWRP recovery solved this issue. I recently made this NAND backup for no reason and it happens to be a very good move. Cheers
Click to expand...
Click to collapse
But for that you have had to install TWRP in the first place...
Mine was stock.
Where is the backup saved?
Mine was rooted + TWRP recovery and I saved my backup on flash drive with TWRP's backup option. I was able to boot into boot menu (pwr + vol-) and it would let me to enter into TWRP only. For me it was enough to initiate a restore process..
volvoxxda said:
Mine was rooted + TWRP recovery and I saved my backup on flash drive with TWRP's backup option. I was able to boot into boot menu (pwr + vol-) and it would let me to enter into TWRP only. For me it was enough to initiate a restore process..
Click to expand...
Click to collapse
Flash drive? Do you mean the Nexus internal memory?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
External, like on this picture.
Final solution: power button micro tactile switch was faulty, causing boot loop from time to time. Replacing that little bastard solved this heartbreaking issue
volvoxxda said:
Final solution: power button micro tactile switch was faulty, causing boot loop from time to time. Replacing that little bastard solved this heartbreaking issue
Click to expand...
Click to collapse
Did you just replace the button or did you have to replace something more?
Thanks
Just the button. You can DIY, it's easy.
worked
worked great. confusing in the start but got it working. Thanks for a life saving guide for nexus 5
incredible
Hi eross,
I registered and logged in just to say thank you for this amazing tutorial. I've been trying to repair my N5 for about 12 hours, and I was about to give up when I saw this post. You saved my Nexus!!
Thanks again. :victory::highfive::good:
eross said:
Not sure what your problem is, but if you are stuck at the boot screen (with the colored dots spinning) you might have the smae problem I describe. You can try to go to bootloader and wipe the cache, if that does not help and you don't mind a wiping all your data do a factory reset. , Go to recovery mode (third option in bootloader), then press the powr and vol up buttons together several times until you get into recovery. Then choose what you want to wipe.
If that does not restore your phone you need to follow my guide. Probably your persist partion is degraded and needs to be fixed. If you follow my guide you will find out what your problem is.
Good luck
Click to expand...
Click to collapse
What if you cannot even get into recovery because it is missing?
Sent from my SM-G920T
ambervals6 said:
What if you cannot even get into recovery because it is missing?
Sent from my SM-G920T
Click to expand...
Click to collapse
You can try to download the stock firmware that's installed on your phone and flash the recovery img, or flash twrp recovery.
help
eross said:
This is a Nexus 5 32GB that's about 14 month old. Was running Lollipop 5.1 which was installed through OTA updates (4.44 >5.0 >5.01>5.1). The device is stock and unrooted.
Yesterday after powering the device up, it went into the boot screen and never managed to finsih the boot (for hours).
After reading extensively on this and other forums , here are the steps I tired , without success:
1. Go to bootloader and press Start
2.Go to bootloader , erase cache
3.Go to bootloader erase user data (factory reset).
I then tried to flash the factory image back. I tried all Lollipop versions from the google developers page of factory images. (can't post links yet...)
starting with 5.1.0 (LMY47I) and going down. All flashing was completed successfully, but the problem remains.
Then I tried 4.4.4 (KTU84P) and the device finally booted up, but it is crippled: Most times It only sees a storage of 16GB , the phone does not recognize any cellular carriers, google play crashes, camera crashes, gallery crashes. An error states that "no external memory is available". Basically it is useless.
I am wondering if it is a software or hardware problem. It appears as though part of the phone's memory is not functioning . Is there a way to check this? Is there a way to fix this?
Thanks
Edit: Just came back from an LG lab. Bad news. Need to replace the motherboard. Costs about 200$ !! Can't find anything cheaper on ebay. Guess it's time for a new phone
Edit #2 - SOLVED !!:laugh:
OK, this for any poor soul in the same state. This issue can be solved without replacing the motherboard for 200$.
The problem in my case was that the /persist partition was degraded, and could not mount. Here is how I found it out, and how I fixed it:
First, try to flash a stock image that will load, even if not fully working. You will need this later. In my case I could flash version 4.4x and get the phone to load.
The easiest way I found to flash my phone is using Julian OS' script. You can download the stock image5.0 and 5.01 with the script from here:
https://www.androidfilehost.com/?w=files&flid=22367
You will need to adapt the 4.4x firmware to have the script flash it, but it's very easy, just a couple of files to rename.
When you open Julian's zip file you will see that he uses a script that flashes the firmware's images one by one. What I did was download the stock images from Google https://developers.google.com/android/nexus/images , used winrar to extracrt all the files from the .tgz file to a folder, then unzip the only zip file there (image-hammerhead-xxxxx.zip) which contains 5 img files. I then renamed the radio-hammerhead-xxxxx.img to radio.img and bootloader-hammerhead-xxxx.img to bootloader.img. Now all the file names comply with Julian's script. From Julian's archive copy the files "From Bootloader.bat" and "fastboot.exe" to the folder where all the images you just renamed are.
Put the phone in bootloader mode (turn the phone off, press the Vol- and the power buttons). Once the the phone is in bootloader mode, connect it to the PC and run "From Bootloader.bat" and follow the onscreen instructions. In about 2 minutes, your phone will be flashed.
Turn the phone on, if you are lucky it will load the OS. Disregard all the error messages, and don't bother setting the phone up. If you skip wifi, and don't have a sim in the phone you can finish the basic setup quickly.
Next you need to get developer tools activated: Settings>about phone>Build number. Tap 7 times on the build number and this will unlock Developer tools. Go back to settings and the new developer tools and enable usb debugging. Approve any popups.
I am not aware of how to enable usb debugging if you cannot go into the settings. If non of the stock images loads for you, search for a way to get usb debugging working , or else you cannot continue. You need this for ADB to connect to the phone.
Once this is done , boot the phone into debugging mode.
Read the guide here http://android.stackexchange.com/qu...dots-lollipop-screen-after-hard-factory-reset
I got as far as activating ADB Sideload when I got the error "cannot mount /persist". I then understood what the problem was. If you get the same error - you are in luck!
Then go here, to learn how to fix the broken persist partition.
http://forum.xda-developers.com/google-nexus-5/general/guide-to-fix-persist-partition-t2821576
There are some prerequisites to getting this to work.
The first one is that the phone can be reached by ADB, this is why you needed the usb debugging mode.
Second, you need to install a custom recover image. Don't worry, you will overwrite it later. The one I used is TWRP. Get the latest version from here:
http://techerrata.com/browse/twrp2/hammerhead
To install I recommend you copy Fastboot.exe and the TWRP file to an empty folder on your PC . Rename the TWRP file to "recovery.img". Open a command prompt in the folder (see here if you don't know how http://www.techsupportalert.com/content/how-open-windows-command-prompt-any-folder.htm) , in the black window type: fastboot flash recovery recovery.img and hit Enter. Wait a few seconds and it will finish.
Third, you need to install an Android driver called Universal Naked Driver 0.73 from here: http://forum.xda-developers.com/showthread.php?t=2386956. Unzip the file to a folder.
Since the author of that guide states you need to uninstall any driver that already exists, I decided to install it on a PC that has no android driver. When you connect the phone to a windows 7 pc for the first time it will search for a driver. I disconnected the internet and windows installed a generic driver. In device manager I saw Nexus 5 with a yellow triangle. I Right clicked on it > update driver software > Browse my computer for driver software and point to the folder you unzipped the driver. You will get a warning - allow the installation.
Last, you need to root your device. (I think this can also be done from within TWRP , but I am not sure how...) I did this very simply by downloading CF-Auto-Root from https://autoroot.chainfire.eu/ The file you need is this: https://download.chainfire.eu/363/CF-Root/CF-Auto-Root/CF-Auto-Root-hammerhead-hammerhead-nexus5.zip . Unzip it, put your phone in bootloader, run root-windows.bat.
Now you are prepaired... Follow the guide by bitdomo . Open a command prompt where adb.exe is located , and run the 2 commands bitdomo wrote. You will get a series of questions , type y followed by Enter until it's all done.
SInce you are still in bootloader mode, and a big START is at the top of the screen, click the power button to reboot. Now your oS 4.4x should load properly. Make sure everything is working.
Now you can flash to the latest firmware 5.10 - download the file from the developer site I gave before, use Jason Os's script to flash the image, and lock the device.
When I first booted the device , I saw that it only recognized 16GB instead of 32GB. To solve this install TWRP again, go to Wipe>Format data . Then reboot the device and make sure you have 32GB.
If you like the stock recovery instead of TWRP you can use Fastboot to flash the original recovery.img.
Now you have a working Nexus 5 , v5.10.
Thanks to LyricWulf and bitdomo for their life saving guides. I hope this helps others in the same spot, and saves them 200$ .
Addendum: According to bitdomo, installing a custom recovery like TWRP enables USB debugging by default even if the phone does not boot. I have not tried this myself, but this means you can foergo installing os 4.4x , and go straight to ADB and run the command that fixes the persist partition.
Go ahead and try it. It will save you a lot of time!
Click to expand...
Click to collapse
My N5 has exact problem as yours even same errors of camera and playstorw crashing when i loaded older android version.. now im positive your instructions will help me but im having some trouble with your steps i do not know how to type comnands with ADB .. im truly novice and dont want to damage the phone more could you simplify the steps or make a video please? Thank you
Sorry, I can't make it any simpler than that. I can't make a video now because my phone is fixed. Adb is very simple, it's like an old DOS window where you type the text. I would follow Bitdomo's advice and start by installing TWRP. This will get you USB debugging, and you can run ADB and follow his instructions to fix the persist partition.
I'd like to create a new thread on installing TWRP and rooting Android Nougat (7.x) on version B360 of the Honor 8. All the threads I see are people frantically trying to restore their phone to their previous glory. To keep people from asking "will this work on yada yada model, *I* have a FRD-L04 which is the 32gb unlocked SINGLE SIM variant sold locally at Best Buy here in the states and I'm pretty sure the FRD-L09 is the international DUAL SIM version with 64GB and I believe firmware for both of these are different? If not, please correct me. The process should be the same for all variants, but the files used will be different.
I want to update this OP and keep it as up to date as possible. If we can get 3 or more people to confirm a certain process works in this thread, I will update it with the proper links to all tools/files/versions of TWRP and SuperSU as well as firmware that's needed. I think I currently count eleven different threads all over the place on this and would be nice to have it centralized. Let's help out and get this phone going with a working root on Nougat!!!
Here are the questions I propose:
1. What is the actual steps to root the Honor 8 running a FULL STOCK version of B360 (Android 7.x)?
A. Unlock Bootloader (This process should be the same as always)
B. Flash TWRP (Which version?) This should be a simple flash with fastboot
C. Flash SuperSU (Which version?) This should be a simple flash with TWRP
D. What are the current issues with this process? (encryption issues, formatting, unable to access the Data partition, etc)
E. How to revert back (and when I say back, I mean ANY working state of Nougat (Android 6.x) or Marshmallow(Android 7.x))
F. How to install extras (Xposed for example, etc)
If I can have answered the questions above, I will clean it up and move it over to the guide section. As it stands now we have no guide. We just need clarification on what works, what doesn't and the process.
Also, PLEASE be kind to those who don't speak English as their primary language. The Honor 8 is an international phone and I see many people getting angry because they don't understand or don't follow instructions correctly because the OP didn't clearly state what they did. Let's help each other out!
Here's an example step by step for unlocking the bootloader below. This is what I'd like to do for each of the questions above.
A: Unlocking the bootloader (UNDERSTAND THAT BY UNLOCKING THE BOOTLOADER ALL YOUR DATA ON THE PHONE WILL BE ERASED AS IF YOU'RE PULLING IT OUT OF THE BOX FOR THE FIRST TIME)
1. Go to Huawei's EMUI site and log in. If you need to create a new account, do so. Link here: http://www.emui.com/en/plugin/hwdownload/download
2. Click on the DOWNLOAD link at the top of the site.
3. Underneath the search field you will see a green link that says "Unlock Bootloader". Click it and follow the instructions. You will be asked to enter in several pieces of information about your phone.
4. Once you've filled out all the information, you will receive your unlock code at the bottom of the screen. Write this down and save it. This number will NEVER change.
5. On your Honor 8, go to Settings > About and tap on the Build Number seven times until you unlock the Developer Settings.
6. In Developer Settings, check Enable OEM Unlock.
7. Scroll down a bit more and check USB Debugging.
8. Go to Huawei's site and download their HiSuite and install it. This installs the OFFICIAL Honor 8 USB driver. Link here: http://consumer.huawei.com/minisite/HiSuite_en/index.html Once the app is installed, you can unselect start with Windows under settings.
9. Plug in your Honor 8 with the provided USB cable. Give it about 45 seconds to install the driver and recognize it. You may need to go to your phone and tap on "Allow File Access". You will be presented with a question asking if you'd always like to trust the computer you just connected to. Select yes, if this is your primary computer you will be working with.
10. Now download the most up to date ADB drivers. A Google employee has created one link to get that and make it easy. Link here: https://developer.android.com/studio/releases/platform-tools.html
11. Open the zip file you just downloaded and create a folder on your computer easy to get to (I recommend c:\ADB) and paste those files there so they are extracted.
12. Now open the folder up in Windows Explorer if you closed it and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
13. Type adb devices and hit enter. You should see a device ID as a response in the window.
14. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
15. Now type fastboot devices and hit enter. You should see your device ID appear again.
16. LAST CHANCE before it wipes everything and unlocks the booloader!!! Type fastboot oem unlock XXXXXXXXXX (where XXXXXXXXXX is the unlock code you received on step 4) and hit enter. It will ask if you're sure. Once this is done, the phone will wipe your data, unlock the phone and reboot. Your Honor 8's bootloader is now unlocked.
B. Flash TWRP (Which version?) This should be a simple flash with fastboot. This is already discussed in another post, but I will put here for reference.
1. Grab a working copy of TWRP for the Honor 8 here: https://forum.xda-developers.com/showpost.php?p=70893767&postcount=408
2. Download TWRP into the same folder you used in step A above (where you're keeping all your files)
2. Navigate in Windows Explorer to this location and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
3. Type adb devices and hit enter. You should see a device ID as a response in the window.
4. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
5. Now type fastboot devices and hit enter. You should see your device ID appear again.
6. Type fastboot flash recovery frd-twrp.img and hit enter.
7. Once this is complete, unplug your phone.
8. Hold Volume UP and Power at the same time. Release ONLY the Power button after the blue Honor logo appears.
9. You now are booted into TWRP and it's been successfully flashed.
C. Flash SuperSU (Which version?) This should be a simple flash with TWRP. This is a crazy process because of the encryption on the Data partition. Below is the exact steps I can confirm works from the help of others on here.
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system
Once here, you can download root checker and it will verify you have root access - BUT.. see section D below!
D. What are the current issues with this process? (encryption issues, formatting, unable to access the Data partition, etc)
Some applications like Root Checker will verify that you have root. Other applications will even prompt you (like any of the basic quick reboot apps that easily let you back into recovery) but other major apps like BusyBox and Viper4Audio (when asking to load the driver) will simply fail upon installation. I'm not sure why, since you have R/W access to both the system and the newly unencrypted data partition. I'm really hoping someone can help with this one!
E. How to revert back (and when I say back, I mean ANY working state of Nougat (Android 6.x) or Marshmallow(Android 7.x))
F. How to install extras (Xposed for example, etc)
I know and have done A, B, and C, but as for the rest I'm not too sure about those.
Maybe in the wrong section but thank you.
joesee said:
14. It will format data using make_ext4fs..
Click to expand...
Click to collapse
The Honor 8 defaults file system for /data is F2FS. Do you see any performance changes going back to EXT4? Is it possible to keep F2FS?
joesee said:
15. When finished, tap Reboot System
Click to expand...
Click to collapse
When I wipe then reboot I get stuck in the bootup screen
EDIT； Nevermind I just didn't wait long enough for my phone to boot up
KevinN206 said:
The Honor 8 defaults file system for /data is F2FS. Do you see any performance changes going back to EXT4? Is it possible to keep F2FS?
Click to expand...
Click to collapse
Yes, but twrp read it as ext file, i tested both format f2fs and ext4, i dont feel any different between those 2.
Yes, you can changed the data format to f2fs with twrp but if you reverted back to MM, its requred to changed the data to ext4 format, if not, you'll get bootloop. (dont know if its twrp bugs or not)
Worst scenario, you'll lost all stock recoveries and everything.
I've been there... Lol
faizalotai said:
Yes, but twrp read it as ext file, i tested both format f2fs and ext4, i dont feel any different between those 2.
Yes, you can changed the data format to f2fs with twrp but if you reverted back to MM, its requred to changed the data to ext4 format, if not, you'll get bootloop. (dont know if its twrp bugs or not)
Worst scenario, you'll lost all stock recoveries and everything.
I've been there... Lol
Click to expand...
Click to collapse
Are you saying I can format /data with F2FS to remove the encryption? I am assuming TWRP does not support the encryption yet. Bootlop sux but most important stuffs on my phone is stored on the SD card anyway so it's not too bad to start over.
Maybe it's just me but it seems encryption adds a bit of risks when playing around with rooting. Has there been a scenario where you *can't* recover from bootloop permanently?
KevinN206 said:
Are you saying I can format /data with F2FS to remove the encryption? I am assuming TWRP does not support the encryption yet. Bootlop sux but most important stuffs on my phone is stored on the SD card anyway so it's not too bad to start over.
Maybe it's just me but it seems encryption adds a bit of risks when playing around with rooting. Has there been a scenario where you *can't* recover from bootloop permanently?
Click to expand...
Click to collapse
So far, i've experienced with bootloop and no recoveries available,
As long as you have fastboot mode and bootloader key, you're safe.
faizalotai said:
So far, i've experienced with bootloop and no recoveries available,
As long as you have fastboot mode and bootloader key, you're safe.
Click to expand...
Click to collapse
I am afraid of running into this issue from a fellow xda. The person still doesn't have a solution. https://forum.xda-developers.com/mate-8/help/encrypted-data-mount-t3537645
I'm running into issues with Bluetooth activation, and previously NFC, which i fixed by reflashing the hw_update package, but still no Bluetooth.
I've followed each and every single step on this guide, and BT was working perfectly before.
Any ideas where this may be coming from ?
Still, thanks or the guide
For the SuperSU instructions, you don't have to reformat /data. Yes, TWRP won't be able to access it, but you really only need that for making full system backups. You can access everything in /system/ and then ADB push to /data/ after boot, or fastboot flash an image to /data/ from bootloader. It's not ideal, but it saves you from having to wipe out your configuration.
I'll echo the above poster, as long as you're bootloader unlocked and can issue fastboot commands I'm not sure you're truly bricked. Worst case scenario you ought to be able to flash individual partition images to recover, I unpacked the Nougat update zip to extract the partition images and I've been using those when my tinkering results in a bootloop -- corrupted boot and corrupted recovery I fixed easily.
Hello. Im coming from general topic on Honor 8 rooting but my issue is related to Android MM.
So i had stock EMUI 4.1 (Android 6.0) which i unlocked, flashed TWRP and SuperSU.
Today EMUI 5 (Android 7 ) update came by air so i installed it. After update - no TWPR neither SuperSU.
I enabled Developer options and saw "Enable OEM unlock" switch in OFF state and grayed out (impossible to switch ON).
So now i cannot flash TWPR as fastboot gives error "Command not allowed".
During boot phone says that it is unlocked, FRP lock. Otherwise it boots and works fine but no root.
Any solution possible?
Thank you.
Telperion said:
For the SuperSU instructions, you don't have to reformat /data. Yes, TWRP won't be able to access it, but you really only need that for making full system backups. You can access everything in /system/ and then ADB push to /data/ after boot, or fastboot flash an image to /data/ from bootloader. It's not ideal, but it saves you from having to wipe out your configuration.
I'll echo the above poster, as long as you're bootloader unlocked and can issue fastboot commands I'm not sure you're truly bricked. Worst case scenario you ought to be able to flash individual partition images to recover, I unpacked the Nougat update zip to extract the partition images and I've been using those when my tinkering results in a bootloop -- corrupted boot and corrupted recovery I fixed easily.
Click to expand...
Click to collapse
can u please tell more or make a step by step tutorial on rooting? I'm stuck in rooting, when I format data and boot agai into recovery and flash su It still ends with error 1, dnt know which error it is..
I have FRD-L09 C432B360 Honor 8 (Sweden) with EMUI 5.0, i have TWRP 3.1.0.0, unlocked bootloader
I could not root my phone since it uppdated to nougat (EMUI 5.0)
I tried everything what i could find on the net, but nothing worked yet, any suggestions ?
thanks
Is there any way to do this without rooting?
I recently got my phone and I didn't get the update. I am still running on EMUI 4.1
ajmdrh said:
I have FRD-L09 C432B360 Honor 8 (Sweden) with EMUI 5.0, i have TWRP 3.1.0.0, unlocked bootloader
I could not root my phone since it uppdated to nougat (EMUI 5.0)
I tried everything what i could find on the net, but nothing worked yet, any suggestions ?
thanks
Click to expand...
Click to collapse
Update to latest TWRP and try again
Shehzaan said:
I recently got my phone and I didn't get the update. I am still running on EMUI 4.1
Click to expand...
Click to collapse
Indian version?? Frd-l02?
venugopalu007 said:
Indian version?? Frd-l02?
Click to expand...
Click to collapse
Nope, it is FRD-L09C636B130. I think this is the Middle East version.
Shehzaan said:
Nope, it is FRD-L09C636B130. I think this is the Middle East version.
Click to expand...
Click to collapse
Yes, it is middle east variant
PalakMi said:
Yes, it is middle east variant
Click to expand...
Click to collapse
Do you have any idea how can I get EMUI 5.0 without rooting?
EDIT 2019: rooting with TWRP from 038 read at the bottom of this post
HOW TO.... Stock, Update, custom recovery and root your s60 !!!!
Disclaimer: if you brick your phone, it's your fault, i have tested this way of rooting my s60 now for a several times and it works 100%
SO READ TWICE, CHECK TWICE, BEFORE YOU CLICK ONCE !!!!! i will not take any responsibility !!!
!!! ONCE AGAIN, READ THE WHOLE GUIDE BEFORE YOU START !!!
OK, now we start:
Thanks to everybody who contributed and made the root possible, here in this thread (Cesarq, OpenMinded, Tuschi, BetonJohn, etc.......) the software in the link further down, is the collected data, freely available in the net and linked in the original Thread several times, i have only bundled one package and wrote this, hopefully usefull guide.
in principle do as follows: (I will only explain once how to sideload or load via recovery, afterwards i will only state what kind and what file)
Prerequisites
- switch phone OFF
- download my collection of the essential s60 files : Here is my collection
EDIT 2019: - grap the 035 update here from the Thread: Thanks to tusch00101
i did not find the 038 update as a single zip file to download. if somebody could provide it ?
(there are ALL files included to flash stock, update to .035, flash twrp recovery and root.)
(this is for Win7 x86, you have to check if it works for other versions yourself, sy..)
- install USB drivers
(for recovery and adb !!! There are two different USB drivers needed)
- install "minimal ADB and fastboot"
- copy the two updates (update032.zip & update033.zip) into the folder, where you have installed "minimal ADB and fastboot" (makes live easier later)
- install QPST (the version of QPST is the one from Androidmtk and should be virusfree.)
(The version of QFIL in my collection is the one without reboot, so you have to reset/reboot your phone manually (resetbutton below hatchdoor on your phone) whenever stated in this guide.)
- format micro SD card in fat32 ! and copy SuperSU.zip onto it. Then insert microSD card into your phone.
- switch phone ON
- enable Developer Options, by going into the settings menu and go to "About Device". tip/touch/tap 7x the -build number- field. A message will appear: "You're now developer" (something like this)
- enable USB-debugging. Go again to settings, then "Developer Options" and enable USB-debugging.(flick the switch)
- connect a WORKING USB cable to your phone (Not to your PC atm !!!)
- dial *#06# to see the iMEI('s) of either one or both simslots. dial #02# to check what firmware version you are on
(just for your info: It looks like the "S" in the firmware version (LTE_X.....) indicates, that SingleSim only is activated, while the "D" stands for DualSim activated. my s60 had an "S"... )
(In my phone the second Sim slot (under the microSD card slot), was blocked with a small piece of, simcard shaped, black plastic. With the help of some tweezers the scrap
plastic was gone easily. Anyway --- BE CAREFULL --- when removing it.)
If you are allready on an LTE_D... Firmware version 033 or above (atm only confirmed up to 035) and you want to root with custom recovery, you only need to follow the last step in this guide ("getting twrp and Root") everybody else, continue reading...
getting twrp (for saving your old firmware only)
- power off phone.
- start minimal adb on your PC
- start QFIL (part of QPST) on your PC
- press VOL+ & VOL- simultanousely and connect phone with PC (it will vibrate once, top right LED starts blinking red, screen stays black) (- DOWNLOAD MODE -)
(just in case: to leave Download mode, disconnect phone from PC, press and hold power button for apprx. 15 seconds)
- as soon as you connect your phone to the PC, QFIL should show the Phone/port in the topline allready
(if not, either try to manually select the port, or you probably still have a problem with the USB drivers or the USB cable !)
- QFIL - tick "Flat Build" (top left)
- QFIL - select Programmer, "browse" to the saved location of "update-twrp-recovery-nobootpatch" and select the "prog_emmc.blablabla...mbn" file and doubleclick
- QFIL - "load XML" ,select rawprogramm, doubleclick, select patch0, doubleclick
- QFIL - click on "download"
- if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. If so, do a full backup now to your (allready inserted and fat32 formatted) microSD card!!!
when done
- Power off your phone !
flashing stock 31.02
- enter download mode again (Vol+ & Vol-, connect phone to PC.......)
- this time in QFIL, browse in programmer path to "s60_stockFW_31.02" and select the programmer from there
- load XML's (the ones that belong to Stock31.02)
- start download... this will take a while !!!! BE PATIENT !!!!
- when QFIL status window shows finish download, push the reset button on the phone and let it reboot.
(it is normal, that the phone should restart itself 2, maximum 3 times during the first startup, but sometimes it ends up in a bootloop (Cat Logo, reboot, CAT logo, reboot, etc, etc, .......))
(The bootloop mainly happens, if you clear, in twrp recovery, the whole OS, or if you came from another firmware version (LTE_S... -> LTE_D... i.e., but that's no issue either...).
- if it ends up in a bootloop, no worries, just continue ! Believe me, i did this process now several times !
you are back on stock 31.02 !
- Power off your phone again
Updating to 032
- bring up minimal ADB sideload on your PC (start it, if not allready done in previous step (getting twrp)).
- press and hold POWER and VOL+ button on your phone
- when in stock recovery select (with Volume keys) "adb sideload" and click the Powerbutton
- connect your phone to the PC
- on PC, type into the black ADB Terminal window "adb sideload update032.zip" and hit enter
- if correct USB drivers are installed, phone will start downloading the update now.
- when complete, select clear cache, and clear data then reboot your phone.
(again, same as in the step (flashing stock), if bootloop, no worries, just continue, if it boots up, let it boot up and then..)
you're on 032 now
- Power off the phone again
Updating to 033
- do the same steps as described under "Updating to 032" only difference, type in adb window " adb sideload update033.zip"
EDIT2019: - do the same steps for 035 and 038
(After updating to 038, your phone should boot up normally by now. NO MORE BOOTLOOP !)
getting twrp and Root
- this is the same step as above "getting twrp" only difference, this time, no backup needed and...
- when in twrp-recovery, select "install" browse to your micro SD-card, and...
- install SuperSU.zip from SDcard.
- once more, clear cache and data and reboot.
The phone should boot up now, you should be on FW 033, with custom recovery and root !!!
That's all !!!
Oh, one last thing, whoever is having an s60, where only one simslot is working, this guide unlocks the second Simslot as well !!!
Also the problem, some people had, following the other guides (incorrectly) ! (me included) ! , by not using the right QFIL (the one without reboot), in the old Thread, resulting in a
not working WIFI is no issue anymore
EDIT 2019 !!!
Getting TWRP with stock 038 thanks to: CDMCCDMC for the addition !
https://forum.xda-developers.com/showpost.php?p=77978181&postcount=135
thanks for the awesome guide. works perfectly, but i will say every time I plugged my phone in it recognized it as a new device and had to reinstall drivers.... the first few times i did it i thought QFIL froze so i unplugged to reset, this caused an install failure that could not be rectified. I fixed this by uninstalling and reinstalling the drivers from step one and being more patient.
Dear adtbm,
the firmware updates (both) are extracted... became signature failure.
Please update your very useful package... thx
best regards
yanardag
Please i cant use my phone it hangs in a bootloop i need the update.zip 32 and 33
Yanardag said:
Please i cant use my phone it hangs in a bootloop i need the update.zip 32 and 33
Click to expand...
Click to collapse
Thanks for letting me know !
You can get the files from OpenMinded link here
You only need the two update files.
Untill i have updated my package.
EDIT: Package is updated now !
After flash 32 it is starting and i see the wizzard.
But after flashing 33 and rooting i have no wifi.
İ flashed 31.02 then update 32 and after this i update it ota
To 33 and last to 35 and everything is working root (supersu) (dont use magix)is working with 35 very well. Everything ok (xposed, gravity and so on) thx
Yanardag said:
After flash 32 it is starting and i see the wizzard.
But after flashing 33 and rooting i have no wifi.
İ flashed 31.02 then update 32 and after this i update it ota
To 33 and last to 35 and everything is working root (supersu) (dont use magix)is working with 35 very well. Everything ok (xposed, gravity and so on) thx
Click to expand...
Click to collapse
If you don't have Wifi after going to 033, you didn't followed the part of "getting twrp" correctly.
"...... - if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. ....."
If you let the phone reboot after flashing the recovery, it will overwrite the boot and your wifi is gone !
But nice to hear, that everything is OK now. Do you have problems with 035 ? some people report, that they having issues with the display camera on 035 ...
Sorry for this silly question, but i´ve seen that in other models once you install twrp then you can flash super su, why here you have to downgrade to 0.31 first?
Thank you in advance.
javizap said:
Sorry for this silly question, but i´ve seen that in other models once you install twrp then you can flash super su, why here you have to downgrade to 0.31 first?
Thank you in advance.
Click to expand...
Click to collapse
Hi,
not sure, if you have read the complete guide, or if you have read through the 28 pages of the original Thread.
I think, it could be possible, (but i did not tested it) to flash the recovery via QFIL directly and then install SuperSU, without going back to 031. But since there are models of the s60 out, where only one Simslot is available (Please read my guide), to get the second slot activated you have to flash an LTE_D... firmware and, thanks to Cesarq, we (only) have atm his 031 firmware available, which is luckywise an LTE_D. firmware !
Like i mentioned in this guide allready, i did not found out the way how to root the s60 (the credit goes to Cesarq) and i also did not find out, how to update to 033 (this credit goes to OpenMinded), i have only collected the software & tools, bundled it and wrote this guide, with the available information written throughout the 28 pages of the original Thread.
So please feel free and test it and write us your result !
ok, just did my s60 last night, everything seemed to go just as described. i just checked and it seems it took the update and the dual sim activation. it didnt take root tho. i tried root checker and titanium and both say no root access. maybe i did the final step wrong? i tried it again with no success. am i supposed to be loading the nobootpatch recovery in qfil as the last step and then install su? thats how i attempted it. any help would be greatly appreciated. thanks in advance!
adtbm said:
If you don't have Wifi after going to 033, you didn't followed the part of "getting twrp" correctly.
"...... - if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. ....."
If you let the phone reboot after flashing the recovery, it will overwrite the boot and your wifi is gone !
But nice to hear, that everything is OK now. Do you have problems with 035 ? some people report, that they having issues with the display camera on 035 ...
Click to expand...
Click to collapse
Nope everything is well. 35 runs without any bugs. For me is importend that xposed is running and that does.
yesca213 said:
am i supposed to be loading the nobootpatch recovery in qfil as the last step and then install su? thats how i attempted it. any help would be greatly appreciated. thanks in advance!
Click to expand...
Click to collapse
I asume, you have SuperSU copied onto your microSC card ?!
When you have finished flashing the nobootpatch recovery (QFIL shows finish download), you have to disconnect the phone from the PC, push Vol+ and Power and Reset (under the hatch) at the same time.
Otherwise Bootloader gets overwritten, your Wifi is gone, no custom recovery and no root.
If you are not using the version of QFIL from my package, you probably have a version that automatically reboots when download is finished and you're screwed !!!
If you did it correctly your phone should boot into twrp custom recovery and you should be able to install SuperSU from SD.
adtbm said:
I asume, you have SuperSU copied onto your microSC card ?!
When you have finished flashing the nobootpatch recovery (QFIL shows finish download), you have to disconnect the phone from the PC, push Vol+ and Power and Reset (under the hatch) at the same time.
Otherwise Bootloader gets overwritten, your Wifi is gone, no custom recovery and no root.
If you are not using the version of QFIL from my package, you probably have a version that automatically reboots when download is finished and you're screwed !!!
If you did it correctly your phone should boot into twrp custom recovery and you should be able to install SuperSU from SD.
Click to expand...
Click to collapse
Yes I did have it copied and installed it. I went back and did it again and hit wipe dalvic cache instead of going back in the recovery menu and wiping cache and data. Up and running 33 rooted, everything seems good so far! Thanks [emoji2]
Sent from my S60 using Tapatalk
adtbm said:
Hi,
not sure, if you have read the complete guide, or if you have read through the 28 pages of the original Thread.
I think, it could be possible, (but i did not tested it) to flash the recovery via QFIL directly and then install SuperSU, without going back to 031. But since there are models of the s60 out, where only one Simslot is available (Please read my guide), to get the second slot activated you have to flash an LTE_D... firmware and, thanks to Cesarq, we (only) have atm his 031 firmware available, which is luckywise an LTE_D. firmware !
Like i mentioned in this guide allready, i did not found out the way how to root the s60 (the credit goes to Cesarq) and i also did not find out, how to update to 033 (this credit goes to OpenMinded), i have only collected the software & tools, bundled it and wrote this guide, with the available information written throughout the 28 pages of the original Thread.
So please feel free and test it and write us your result !
Click to expand...
Click to collapse
I took your advice and rooted without downgrading firmware. My CAT is double SIM from factory and on 0.35 OTA.
I followed your guide but jumped from backup with twrp to install supersu, following all the steps from there.
Until now everything working fine with root.
One more time I can say that people on XDA is the best!
Regards
Dear friends,
How can i uninstall google assistant apk?
When i delete it the phone not restart and ended in a bootloop.
When i deactivate it the same bootloop.
very very good
Hello to this wonderful group. I did the rooting and it worked wonders, I was very disappointed with my Cat s60, for not being able to use the second sim and for the poor quality of the camera. After the root it became dualsim and the camera improved a lot. in addition to everything that means to be root. I am very grateful to ADTBM and to all those who made this possible. thanks thanks. regards
Yanardag said:
Dear friends,
How can i uninstall google assistant apk?
When i delete it the phone not restart and ended in a bootloop.
When i deactivate it the same bootloop.
Click to expand...
Click to collapse
Hi Yanardag,
i have the same problem. Unfortunatley Android IS Google . I really don't know how to disable it. Did you try to freeze it with Titanium ?
That's the only thing i could think of. I am annoyed by that Google stuff as well (especially the google assistant....)
This is one of the reasons, why i had to redo my s60 a several times.
So if anybody here finds a way to disable Google assistant, pleasse let us know !!!
@varonv: Nice to hear and thanks for the feedback !
Hi,
I am on 027 now. No OTA update available. Can I try this guide?
Thanks
freeze it with Titanium
adtbm said:
Hi Yanardag,
i have the same problem. Unfortunatley Android IS Google . I really don't know how to disable it. Did you try to freeze it with Titanium ?
That's the only thing i could think of. I am annoyed by that Google stuff as well (especially the google assistant....)
This is one of the reasons, why i had to redo my s60 a several times.
So if anybody here finds a way to disable Google assistant, pleasse let us know !!!
@varonv: Nice to hear and thanks for the feedback !
Click to expand...
Click to collapse
I froze it with Titanium: no problems whatsoever.
This Guide works on win 10 also. .. But ending in Win 10 Test mode
STEP BY STEP GUIDE FOR LG V20 H918 UNLOCKING BOOTLOADER, DOWNGRADING, ROOTING AND INSTALLING CUSTOM ROMS (NOOB FRIENDLY)
DISCLAIMER: I'M NOT THE DEVELOPER OF ANY OF THE BELOW SOFTWARE'S AND YOU PROCEED WITH YOUR OWN RISK AS THIS INVOLVES BRICKING OR DAMAGING YOUR MOBILE IF THE PROCEDURE IS NOT FOLLOWED CORRECTLY. I'M JUST SHARING THE WHOLE PROCESS WHICH I HAVE FOLLOWED TO ROOT AND INSTALL TWRP IN MY LGV20 H918 UNLOCKED T MOBILE.
AND I HAVE TESTED THIS IN MY OWN DEVICE AND WAS ABLE TO ROOT AND ACHIEVE TWRP.
THIS IS ONLY FOR LGV20 H918 VERSION
ENSURE INTERNET IS UP AND RUNNING IN YOUR PC
EDIT: THE WHOLE PROCESS HAS NOW BEEN AUTOMATED IN TWO SIMPLE STEPS TO PREVENT ANY POTENTIAL DAMAGE TO YOUR DEVICE. THANKS TO THE LAFSPLOIT CREATOR BRIAN @runningnak3d.
JUST FOLLOW THE PROCEDURE BELOW AND YOU SHOULD HAVE YOUR DEVICE ROOTED IN NO TIME
1. BACKUP ALL YOUR IMPORTANT DATA BEFORE PROCEEDING.
2.MAKE SURE YOU HAVE CHARGED YOUR PHONE TO AT LEAST 90 PERCENT
CHECK YOUR PHONE SOFTWARE VERSION IN SETTINGS---ABOUT PHONE----SOFTWARE INFO
IF IT IS ANYTHING BETWEEN H91810P TO H91810U MEANS IT IS ARB1 (ANTI ROLL BACK 1) AND YOU NEED TO USE LAFSPLOIT METHOD TO ROOT AND INSTALL TWRP,
IF YOUR VERSION IS H91810O OR BELOW (ARB0), YOU CAN EITHER USE DIRTYCOW OR LAFSPLOIT METHOD FOR THE SAME.
IF YOU ARE ON ARB1, PLEASE FOLLOW THE METHOD BELOW,
PART 1: DOWNGRADING
IF YOUR VERSION IS H91810 (Q, R, S, T, U) YOU NEED TO DOWNGRADE TO A LOWER VERSION ( H91810P) TO EXECUTE LAFSPLOIT.
IF YOU ARE ALREADY ON H91810P, YOU STILL NEED TO RE FLASH THE H91810P KDZ AGAIN FOR THE LAFSPLOIT SCRIPT TO WORK CORRECTLY.
DOWNLOAD H91810P KDZ FILE FROM BELOW
https://androidfilehost.com/?w=files&flid=282709
DOWNLOAD AND INSTALL ALL THE FILES BELOW IN YOUR PC
UPPERCUT AND LGUP----
http://downloads.codefi.re/autoprime/LG/Flash_Tools/LGUP/
LG DRIVERS---
http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
CONNECT YOUR MOBILE TO YOUR PC IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
RUN UPPERCUT.EXE WHICH WOULD OPEN LG'S UPDATER TOOL AUTOMATICALLY.
INSIDE THE LG UPDATER TOOL, CLICK ON BIN AND SELECT THE H91810P KDZ FILE DOWNLOADED EARLIER.
NOW SELECT UPGRADE AND FLASH
ENSURE THE USB CABLE IS CONNECTED THROUGH THE FLASHING PROCESS AND WAIT FOR YOUR PHONE TO REBOOT AND THEN REMOVE THE USB CABLE.
CHECK THE SOFTWARE VERSION AND ENSURE IT IS H91810P
PART 2: UNLOCKING BOOTLOADER
HEAD TO SETTINGS---ABOUT PHONE----SOFTWARE INFO (ENSURE IT IS H91810P)
ENABLE DEVELOPER OPTION IN YOUR PHONE BY CLICKING ON THE BUILD NUMBER MULTIPLE TIMES
NOW HEAD TO SETTINGS---DEVELOPER OPTIONS
TURN ON OEM UNLOCKING, ENABLE USB DEBUGGING AND DISABLE 'VERIFY APPS OVER USB'
NOW CONNECT YOUR PHONE TO PC AND OPEN ADB COMMAND CENTER PROMPT IN YOUR PC
adb devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN ADB
adb reboot bootloader--->THIS REBOOTS YOUR DEVICE IN FASTBOOT MODE
fastboot devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN FASTBOOT
fastboot oem unlock---->THIS COMMAND WOULD UNLOCK YOUR BOOTLOADER AND RESET's YOUR DEVICE.
fastboot oem device-info OR fastboot getvar unlocked ----->THIS WOULD CONFIRM IF YOUR BOOTLOADER HAS BEEN UNLOCKED OR NOT.
fastboot reboot-----> THIS WOULD REBOOT YOUR DEVICE
IF THE BOOTLOADER HAS BEEN SUCCESSFULLY UNLOCKED, THE DEVICE WILL SHOW AN UNLOCKED BOOTLOADER WARNING MESSAGE WHILE BOOTING (THIS CAN BE IGNORED OF COURSE)
PART 3: CREATING A BOOTABLE LINUX USB USING FWUL
DOWNLOAD FWUL_v2.7_x86_64_15GB.zip FROM THE LINK BELOW AND EXTRACT THE IMAGE FILE SOMEWHERE IN YOUR PC.
https://androidfilehost.com/?w=files&flid=214529
DOWNLOAD RUFUS FROM BELOW AND INSTALL
https://rufus.akeo.ie/
INSERT A PEN DRIVE IN YOUR PC AND RUN RUFUS.
INSIDE RUFUS SELECT THE IMAGE FILE AND SELECT START (AFTER SELECTING START SELECT DD MODE IN THE DIALOGUE BOX) TO CREATE A BOOTABLE PEN DRIVE (WARNING: THIS WOULD FORMAT YOUR PEN DRIVE)
NOW YOU SHOULD BOOT YOUR PC FROM THE BOOTABLE USB STICK WHICH YOU HAVE JUST CREATED
THIS WOULD MAKE YOUR PC RUN LINUX OS
TYPE PASSWORD AS linux AND ENTER
PART 4: INSTALLING TWRP AND ROOTING USING LAFSPLOIT
BEFORE PROCEEDING ENSURE YOU BOOT YOUR PHONE AND DONE ALL THE BASIC SETTINGS
NOW HEAD TO THE DEVELOPER OPTIONS IN YOUR DEVICE AND ENSURE OEM UNLOCKING AND USB DEBUGGING ARE SWITCHED ON.
NOW CONNECT YOUR DEVICE TO THE PC (RUNNING LINUX OS FROM PENDRIVE) IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
DOUBLE CLICK ON THE LG FOLDER INSIDE FWUL DESKTOP
INSIDE THAT, DOUBLE CLICK ON LGLAF(RUNNINGNAK3D) ICON WHICH WILL OPEN A TERMINAL
ENTER THE BELOW COMMANDS
git pull
git checkout h918-miscwrte
./step1.sh
THE ABOVE COMMAND FLASHES TWRP RECOVERY ONTO YOUR DEVICE.
WAIT AND PULL OUT YOUR DEVICE WHEN IT ASKS TO.
RECOMMENDED: NOW THAT TWRP HAS SUCCESSFULLY INSTALLED, YOU CAN MANUALLY FORMAT,FLASH LATEST TWRP RECOVERY AND USE ANY METHOD LIKE MAGISK OR SU FOR ROOTING.
INSIDE TWRP RECOVERY. FIRST FORMAT USING WIPE--ADVANCED FORMAT--TYPE yes AND FULL DO A FULL FORMAT, THEN FLASH MAGISK AND THE LATEST TWRP RECOVERY BELOW.
MAGISK ZIP DOWNLOAD:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
LATEST TWRP BY PHOENIX(H918):
https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239
OR
IF YOU ARE UNSURE ABOUT FORMATTING AND FLASHING, JUST USE THE BELOW COMMAND TO DO ALL THE WORK AUTOMATICALLY
CONNECT YOUR DEVICE AGAIN IN DOWNLOAD MODE AND ENTER THE FOLLOWING COMMAND
./step2.sh
THE ABOVE COMMAND FORMATS YOUR DEVICE AND FLASHES MAGISK TO ACQUIRE ROOT.
TIP : IF YOU FACE ANY ENCRYPTION ERROR AFTER USING STEP2. SH, DO A ADVANCED FORMAT WITHIN TWRP AND FLASH MAGISK AND LATEST TWRP BY PHOENIX MANUALLY.
YOU ARE NOW ROOTED WITH TWRP RECOVERY INSTALLED.
REMEMBER TO BACK UP THE CURRENT ROM BEFORE FLASHING ANYTHING..... DO CHECK POST #2 FOR OTHER TWEAKS
IF YOU WISH TO UPDATE TO LATEST STOCK (10U) AND KEEP ROOT AND TWRP, JUST FOLLOW THIS LINK AND DO REMEMBER TO ROOT USING MAGISK AFTER FLASHING THE ROM BEFORE YOU BOOT.
https://forum.xda-developers.com/v20/development/rom-h91810q-stock-rom-twrp-flashable-zip-t3681312
I WOULD LIKE TO THANK ALL THE DEVOLEPERS WHO HAVE CREATED THE ABOVE SOFTWARES WITHOUT WHICH THIS ISNT POSSIBLE.
CREDITS:
@autoprime FOR HIS UPPERCUT TOOL
@steadfasterX FOR HIS FWUL TOOL
@Phoenix591 FOR HIS WORKS ON TWRP RECOVERY
AND FINALLY, @runningnak3d FOR HIS EXCELLENT WORK IN ROOTING OUR DEVICE :good:
WHAT NEXT?
NOW THAT YOU HAVE ROOTED YOUR MOBILE, I WOULD RECOMMEND DOING THE BELOW TWEAKS FOR FURTHER ENHANCED EXPERIENCE....
1.THERMAL THROTTLING
IF YOUR ARE STILL ON A STOCK BASED ROM , I WOULD STRONGLY RECOMMEND TO RECONFIGURE YOUR THERMAL FILE TO PREVENT ANY POSSIBLE LAG WHEN USING EXTENSIVELY...
FIRST DOWNLOAD THE FILE BELOW:
https://drive.google.com/file/d/0B0W3xXHgfOxvLUpKNWhrWDE0TDg/view
USE A ROOT EXPLORER (PREFERABLY ES EXPLORER) AND GO TO ROOT/SYSTEM/ETC.
YOU SHOULD HAVE A FILE NAMED thermal-engine-8996.conf
RENAME IT TO thermal-engine-8996.conf.bak (JUST FOR A BACKUP IF ANYTHING GOES WRONG)
ENSURE THE ABOVE DOWNLOADED FILE IS IN .conf FORMAT
IF IT ISN'T , RENAME TO thermal-engine-8996.conf
NOW SAVE THE FILE TO THE SAME DIRECTORY VIZ ROOT/SYSTEM/ETC
GIVE PERMISSION TO THIS FILE TO rw-r--r-- USING THE ROOT EXPLORER ( SELECT FILE--->PERMISSION--->READ WRITE, READ, READ)
FINALLY SAVE AND REBOOT.
THIS WOULD OVERWRITE THE THERMAL LINKED PERFORMANCE OF THE CPU TO AVOID ANY LAG WHEN USING EXTENSIVELY.
2. RCTD REMOVER
ALSO I WOULD STRONGLY RECOMMEND TO REMOVE THE LG'S RCTD CCMD AND TRITON MONITORS AS THESE WOULD RUN CONTINUOUSLY IN A ROOTED LG PHONE AND CONSUME LOT OF RESOURCES...
JUST INSTALL THE RCTD REMOVER APP FROM BELOW LINK:
https://labs.xda-developers.com/store/app/com.zacharee1.rctdremoverforlg
GRANT SU PERMISSION AND CHECK THE DESIRED FILES (I CHOSE ALL THREE FILES) AND CLICK ON PATCH, FLASH IMAGE AND REBOOT (THIS WOULD PATCH THE BOOT FILE, SO AGAIN IT IS ADVISABLE TO CREATE A BACKUP OF THE CURRENT BOOT IMAGE USING TWRP OR WITHIN THIS APP ITSELF)
3. SCREEN CALIBRATION:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
INSTALL KERNAL AUDITOR APP FROM PLAY STORE AND GRANT SU ACCESS
CHANGE THE BELOW VALUES WITHIN THIS APP (SCREEN SETTINGS)
Minimum RGB value = 35
Saturation Intensity = 27
Screen Hue = 1520
Screen Value = 112
Screen Contrast = 132
THIS WOULD SOMEWHAT REDUCE THE BLUE TINGE AND GHOST APPEARANCES OF THE SCREEN
CREDITS: @Holyman007 for his thermal tweak @Zacharee1 for his rctd remover app
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
turdbait said:
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
Click to expand...
Click to collapse
this would end up with a stock rooted phone with twrp recovery if all the methods are correctly followed..
......final result would be.... you would end up with a rooted stock rom with a twrp recovery....
your second screen will work perfectly.....
please let me know if you need a different thread for installing custom rom, and to reduce the lag., install sound mod to get maximum sound output and customize second screen... i will create a noob friendly thread for these as well......
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
kish9046 said:
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
Click to expand...
Click to collapse
Thank you, I've been reading up on the main lafsploit thread for awhile but I was still not sure about the whole flashing KDZ file and stuff so when you posted this thread it was a motivator to try it out. Got a day off from work tomorrow so gonna try it then so I don't got to worry about the time.
I'm interested in the max sound output and second screen customization if you got the time and its not to much to ask. If you want to wait till either someone else comes along thats interested or till I root just so you don't waste your time I shall update hopefully sometime tomorrow. Thanks again.
kish9046 said:
sha256sum h918-twrp.img ----> THIS WOULD AGAIN THROW A HASH, CHECK IF BOTH THE HASHES ARE ABSOLUTELY SIMILAR
Click to expand...
Click to collapse
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
onlineaces said:
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
Click to expand...
Click to collapse
Thanks for the heads up.... Changed to EXACT...
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
turdbait said:
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
Click to expand...
Click to collapse
great to hear that u have root now.... will post soon on other mods including a step-by-step process on removing rct soon....
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
cnjax said:
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Glad someone actually laid it out step by step.
kish9046 said:
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Click to expand...
Click to collapse
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
BROKEN1981 said:
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
Click to expand...
Click to collapse
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
kish9046 said:
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
Click to expand...
Click to collapse
Abr1 yes I am rooted with twrp.
As I said, the commands to push magisk and twrp to sd did not work. I used usb otg in twrp to push magisk, but forgot to put twrp to flash as well.
I forgot that twrp had replaced download mode, so I was going a bit nuts trying to figure out how to get twrp to recovery. Lolol
Now I'm on latest update with rtcd removed thanks to the op who hosted it on xda as a flashable zip.
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
As you are in twrp, you can manually flash magisk zip and twrp recovery.....
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming. Being a noob at the time, i was also extremely nervous that i could possibly brick my phone or screw something up. i didn't, and no part of this should brick yours either. ***However - if you do somehow break your device in any way, that is on you. by completing these steps, you assume full responsibility. now that we have that out of the way, lets continue. at the end of this guide, you should have a rooted device with your choice of os (7 or 8 - or even a custom rom if you choose!). you should also have twrp. this guide would not have been possible without users runningnak3d and clsA
**** Also, during this Proccess, Your Phone WILL be wiped clean!!! don't forget to back up photos, videos, etc...*****
don't download any other files than from this guide.
1. download these files (required) https://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz (for a rootable os that we can flash, - get this also (required) https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222 this program is called lg up and has been patched to work with this phone. you will also need this. https://androidfilehost.com/?fid=1322778262903990218. these are the root files and need to be all in the same folder as where lg up is installed. you will also need to have access to fastboot and need to have adb installed. that is pretty easy, give it a google search if you still need help.
if you are running 32 bit, get this https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
this is the OS. get nougat, which has like three less steps (you can't upgrade to oreo on this os once rooted) or scroll down and get the oreo file. nougat (really old version) https://drive.google.com/file/d/1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X/view
Oreo - get this first file, and the ones under it. https://www.androidfilehost.com/?fid=1322778262904015326
***https://androidfilehost.com/?w=files&flid=283977*** You have to have this file if getting oreo. if you chose nougat, then don't get this.
2. Now that you have everything downloaded and installed, put your phone into download mode. (power it off, hold the volume down button and plug in a usb c cable attached to your pc. don't stop holding volume down until you see download mode.)
3. once it is in download mode, open up lg up. select your device, (it should be in standby mode, according to lg up) and click dump (this is a total backup of the phone, you are lucky you know this right now, I didn't when i rooted mine) . it will bring up a file explorer, select where you want it to save to. (I chose my desktop). once you have a folder selected., it will bring up a bunch of options for partitions. click select all and uncheck user data. ****Make SURE that you don't unplug your phone during any part of this process or any other process in this guide, it will permanently brick it. ***** ow that you have selected everything but userdata, click start.
4. once that finishes, you will have made a full backup of your phone in case something goes wrong.
then click the partition DL button and select the h915 v10e kdz file (the file that i said was the rootable os we can flash) (the first file you downloaded). make sure bin file stays checked. then click start. once that finishes, your phone should automatically reboot into an old nougat operating system. then go to settings, enable developer options, and turn on usb debugging. that is easy, if you can't figure it out, google is your friend. now you should have no cellular signal. this is not the permanent ROM.
5. go to the play store and download terminal emulator for android. (once usb debugging has been enabled
then go ahead and go to the folder where you extracted the root files/package. hold shift and right click to open a command windows there or powershell, whatever your pc says. open 2 of those windows. then, in the first one, type, adb logcat -s dirtysanta
****don't close this window.*****
then in the other window, type STEP1.BAT
*****don't close this window.***** It may take a minute, but after a while it will let you type again. once you can, type run-as con
chmod 0777 /storage/emulated/0/*
6. then, pull up the window you used the logcat command in. leave it there so you can watch it
then, on your phone, go to the terminal emulator and type applypatch /system/bin/atd /storage/emulated/0/dirtysanta
once you do that, glance at the logcat window. once it says to run step 2, go to the window where you typed step1.bat. type STEP2.BAT
at this point, your phone should go ahead and reboot and say fastboot mode up at the top. now, go to your window where you typed all the .bats and type STEP3.BAT. wait until your phone reboots and you will see a screen saying that you can;'t use your phone. this is bogus, just ignore it and wait like 10-15 seconds for it to get past that screen. then it will boot that android and you should get a green screen.
Now, quickly, pull the battery from your phone. leave it out for a little while while we prepare the next steps.
If you want oreo, scroll to where it says OREO in capital letters. if you want nougat, scroll to where it says NOUGAT.
NOUGAT
use the file that you downloaded if you selected nougat - it should be a zip. it will be called h910-10r. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the h910 zip file and install it. then go ahead and reboot your phone, you will have a rooted android 7 rom. you will also have signal. then download supersu from the play store and open it to have root.
OREO
use the file that you downloaded if you selected oreo - it should be a zip. it will be called something along the lines of full stock oreo rooted. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. also, go to your root package folder and find the twrp image file and put that on your sd card. then go get the mk200 zip file and also place that on your sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the oreo full rooted zip and install it then, install the mk2000 file. after you have done this, click install image and select the twrp. the reason you need to re flash this is because that oreo file re installs the stock recovery. then install the twrp. now reboot your phone. you will have a rooted android 8 rom. you will also have signal. then download a magisk 6.0 manager apk from chrome browser to have root.
IF this worked and your enjoying root give me a thanks.
This is redundant to the existing h910 root guide, all you did was copy their work and re-post it
Sent from my LG-H910 using XDA Labs
cnjax said:
This is redundant to the existing h910 root guide, all you did was copy their work and re-post it
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Yes, that is why i gave them credit. However, It is more noob friendly and takes the time to explain what they are doing to their own phones as well as give them the option for nougat or oreo, something that none of the other guides have.
Ok, so I did it sucessfully, it's was still very complicated for me as some info is vague for a beginner. But after searching and retrying, and retrying, it worked. but go to runningnak3d post to get more info, and he wanted me to use sd card to root, but that did not work for me.. Your method worked for me. Thanks
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming....
Click to expand...
Click to collapse
your guide is good
+1 for for linking to the missing files from the old guide
+1 for mentioning me and @runningnak3d
you could break up the long paragraphs and bullet style the steps in order so it's easy to follow
theirs a video here of the steps and how the command windows should look > https://www.youtube.com/watch?v=jnRWnSHLGSc
this is where allot get confused in the guide.
I also don't remember you mentioning doing the battery pull after STEP1 when the phone sometimes hangs then run STEP2
I would also change the link to the H915 kdz to the android file host file in case LG changes it.
Their was a guy recently that could not get LGUP working you could make note that you may need the 32 bit VS 2010 > https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
Any how, the guide is OK and the steps are not that bad, after a few tries most anyone can learn it.
clsA said:
your guide is good
+1 for for linking to the missing files from the old guide
+1 for mentioning me and @runningnak3d
you could break up the long paragraphs and bullet style the steps in order so it's easy to follow
theirs a video here of the steps and how the command windows should look > https://www.youtube.com/watch?v=jnRWnSHLGSc
this is where allot get confused in the guide.
I also don't remember you mentioning doing the battery pull after STEP1 when the phone sometimes hangs then run STEP2
I would also change the link to the H915 kdz to the android file host file in case LG changes it.
Their was a guy recently that could not get LGUP working you could make note that you may need the 32 bit VS 2010 > https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
Any how, the guide is OK and the steps are not that bad, after a few tries most anyone can learn it.
Click to expand...
Click to collapse
alright, thank you so much for the advice! 1. i don't want to switch to bullets because when i was trying runningnak3d's guide, it seemed overwhelming. also people can comment on the step number that they were lost at. 2. i will change the kdz to something else if the file does change. i did in fact mention the battery pull step, if you ever need to find something in a page, hit control and f and then search the page.. i will add the 32 bit file. Thanks!
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available
. . .
this guide would not have been possible without users runningnak3d and clsA
IF this worked and your enjoying root give me a thanks.
Click to expand...
Click to collapse
W O W . . .
What a way to rip-off runningnak3d's guide.
I mean, I can understand rewriting it... I did the same. But, just to parse it out for me to follow better.
But your statement "...there was no root guides available..." is just BS.
Below is my guide... for me to do the process.
Creation date on the text file was November 7, 2017. Just over a week after runningnak3d made the original post.
Difference is, I didn't feel the need to post someone else's work, in an attempt to try claiming credit for it, due to nothing more than a "rewrite".
What you meant to do is this: (FIFY)
Cool guide for rooting your LG V20. Works for 20h, too!
--------------------------------------------------------------------------------------------------------------------
Materials:
8+GB microSD Card - formatted exFAT or ext4
LG Up (patched)
C:\Program Files (x86)\LG Electronics\LGUP <- install here, or it won't read DLL correctly
ADB
DirtySanta root package - (No working Link)
H91510e_00_VTR_CA_OP_1205.kdz - http://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz
h910-10r.zip - https://drive.google.com/open?id=1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X
- Check the SHA hash: 5451146030393e490dcfba3558b620badefe75cd
Terminal Emulator APK
Root Checker APK
Settings Database Editor APK
1) Copy h910-10r.zip, SuperSU-v2.82.ZIP, SuperSU.Pro.APK, Terminal Emulator, Root Checker, and Settings Database Editor to microSD Card and insert into phone.
2) Put phone into download mode (power off / hold vol. up & plug in USB cable)
Use LG UP to dump phone. When you run it, there will be additional radio buttons.
- Pick the one that says DUMP and click Start. You will be asked what partitions to dump, click the "select all" checkbox, and then you can uncheck "userdata".
3) When finished with the Dump, click the PARTITION DL radio button, pick the H915 v10e KDZ, and click start. Make sure all partitions are checked.
- Select H91510e_00_VTR_CA_OP_1205.kdz, Tick box to set as input file.
- Select all partitions
- Confirm all partition changes
- Once it is complete, phone will reboot into old Freedom Mobile ROM
- Disconnect USB Cable
- Complete Android setup, and you may not have signal (this is normal).
- Enable developer mode, and enable USB debugging.
- Enable Unknown Sources
- Connect USB Cable
- Make sure that your PC is authorized (tick always allow, and then OK).
4) Install Terminal Emulator for Android -- NOT Termux.
5) Extract root kit somewhere that you can run adb and fastboot from.
6) Open [2] Command Prompts in the directory containing ADB.EXE.
A) In first window, execute: adb logcat -s dirtysanta
B) In the secxond window, excute: STEP1.BAT
- Wait until prompt returns (several minutes)
C) Window 2: run-as con
D) Window 2: chmod 0777 /storage/emulated/0/*
E) Open Terminal Emulator on phone, enter: applypatch /system/bin/atd /storage/emulated/0/dirtysanta
- Watch window 1. Wait for "Finished. Please run Step 2 now."
F) Window 2: "exit"
- Window 2. "exit" again.
- STEP2.BAT (adb reboot bootloader)
- Phone now shows FASTBOOT MODE
G) STEP3.BAT
- This flashes TWRP and WW 2.0 kernal
- Phone will reboot on completion
7) If phone reboots to Android, in Window 2 execute: adb reboot recovery
- If phone is stuck at secure start-up, pull battery and boot into TWRP (same as factory reset)
8) In TWRP:
A) Settings: UN-Check Enable Screen timeout
B) Format Data (type "yes" to proceed)
C) Wipe Cache & Dalvic Cache
D) Install (flash) h910-10r.zip
E) Install (flash) SuperSU-v2.82.zip
F) Format Data
G) Reboot Phone
Problem Occured:
I seem to have a problem at running this, "run-as con chmod 0777 /storage/emulated/0/*" command.
the error i get is,
xelsa:/ $run-as con
chmod 0777 /storage/emulated/0/*run-as con
run-as: Package 'con' is unknown
Help?
SheMi363 said:
I seem to have a problem at running this, "run-as con chmod 0777 /storage/emulated/0/*" command.
the error i get is,
xelsa:/ $run-as con
chmod 0777 /storage/emulated/0/*run-as con
run-as: Package 'con' is unknown
Help?
Click to expand...
Click to collapse
This "run-as con chmod 0777 /storage/emulated/0/*" actually is a two commands:
- first type "run-as con" and press ENTER
- second type "chmod 0777 /storage/emulated/0/*" and press ENTER
Search in You Tube for "How to Root install TWRP for LG V20 H910 Edition!" from user NewTechBegins. This is very good video tutorial, step by step.
Hello, so nothing happens for me after I enter the code into terminal emulator, what am I missing?
After all these done I'm rebooted to secure start-up where I need to enter password. Tried my 4 digit VIN and didn't work. As suggested earlier in this thread I pulled battery and wipe everything and install Oreo_full_rooted.zip, mk2000, and TWRP 3.3.1-0. It boots up the same to the secure start-up.
I might have done differently in process.
1. H91510e_00_VTR_CA_OP_1205.kdz I downloaded did NOT match MD5 on its download page. Tried twice and it was the same. I went ahead and used it.
2. I ran into "adb server is out of date, killing.." message but was able to download an adbfix and somehow got through
3. STEP1.BAT and the rest of BAT were not accepted in Win10 powershell so I had to enter them by hand and it went smoothly with no error
4. I used twrp 3.3.1-0 as suggested in NewTechBegins' youtube clip
5. Phone boots into scramble messages like shattered warning sign before LG logo appeals. It will eventually enter twrp or secure start-up after some wait. Takes longer than it should, 5 minutes or so.
Wish to stay on Oreo but might try the 10R Rom if I have no other choice.
Please help.
(Secure start-up appeared the first time after step 3 where it was supposedly be a green screen and I can pull battery. It didn't. It went to secure start-up. I pulled battery anyways and rebooted into TWRP, I was asked to enter password again. After a few wrong attempts I was able to bypass it and enter TWRP to proceed with install)
edit: Eventually succeed by not installing TWRP after flashing OREO and MK2000. Rebooted into Secured Start-up again, pull battery and rebooted into FACTORY Recovery and deleted all user data from there. Rebooted and Android setup began.
Note: BE SURE TO FORMAT DATA AGAIN in TWRP after flashing OREO and MK2000 to have a clean start. Would be nice if it was mentioned in this tutorial.
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming. Being a noob at the time, i was also extremely nervous that i could possibly brick my phone or screw something up. i didn't, and no part of this should brick yours either. ***However - if you do somehow break your device in any way, that is on you. by completing these steps, you assume full responsibility. now that we have that out of the way, lets continue. at the end of this guide, you should have a rooted device with your choice of os (7 or 8 - or even a custom rom if you choose!). you should also have twrp. this guide would not have been possible without users runningnak3d and clsA
**** Also, during this Proccess, Your Phone WILL be wiped clean!!! don't forget to back up photos, videos, etc...*****
don't download any other files than from this guide.
1. download these files (required) https://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz (for a rootable os that we can flash, - get this also (required) https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222 this program is called lg up and has been patched to work with this phone. you will also need this. https://androidfilehost.com/?fid=1322778262903990218. these are the root files and need to be all in the same folder as where lg up is installed. you will also need to have access to fastboot and need to have adb installed. that is pretty easy, give it a google search if you still need help.
if you are running 32 bit, get this https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
this is the OS. get nougat, which has like three less steps (you can't upgrade to oreo on this os once rooted) or scroll down and get the oreo file. nougat (really old version) https://drive.google.com/file/d/1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X/view
Oreo - get this first file, and the ones under it. https://www.androidfilehost.com/?fid=1322778262904015326
***https://androidfilehost.com/?w=files&flid=283977*** You have to have this file if getting oreo. if you chose nougat, then don't get this.
2. Now that you have everything downloaded and installed, put your phone into download mode. (power it off, hold the volume down button and plug in a usb c cable attached to your pc. don't stop holding volume down until you see download mode.)
3. once it is in download mode, open up lg up. select your device, (it should be in standby mode, according to lg up) and click dump (this is a total backup of the phone, you are lucky you know this right now, I didn't when i rooted mine) . it will bring up a file explorer, select where you want it to save to. (I chose my desktop). once you have a folder selected., it will bring up a bunch of options for partitions. click select all and uncheck user data. ****Make SURE that you don't unplug your phone during any part of this process or any other process in this guide, it will permanently brick it. ***** ow that you have selected everything but userdata, click start.
4. once that finishes, you will have made a full backup of your phone in case something goes wrong.
then click the partition DL button and select the h915 v10e kdz file (the file that i said was the rootable os we can flash) (the first file you downloaded). make sure bin file stays checked. then click start. once that finishes, your phone should automatically reboot into an old nougat operating system. then go to settings, enable developer options, and turn on usb debugging. that is easy, if you can't figure it out, google is your friend. now you should have no cellular signal. this is not the permanent ROM.
5. go to the play store and download terminal emulator for android. (once usb debugging has been enabled
then go ahead and go to the folder where you extracted the root files/package. hold shift and right click to open a command windows there or powershell, whatever your pc says. open 2 of those windows. then, in the first one, type, adb logcat -s dirtysanta
****don't close this window.*****
then in the other window, type STEP1.BAT
*****don't close this window.***** It may take a minute, but after a while it will let you type again. once you can, type run-as con
chmod 0777 /storage/emulated/0/*
6. then, pull up the window you used the logcat command in. leave it there so you can watch it
then, on your phone, go to the terminal emulator and type applypatch /system/bin/atd /storage/emulated/0/dirtysanta
once you do that, glance at the logcat window. once it says to run step 2, go to the window where you typed step1.bat. type STEP2.BAT
at this point, your phone should go ahead and reboot and say fastboot mode up at the top. now, go to your window where you typed all the .bats and type STEP3.BAT. wait until your phone reboots and you will see a screen saying that you can;'t use your phone. this is bogus, just ignore it and wait like 10-15 seconds for it to get past that screen. then it will boot that android and you should get a green screen.
Now, quickly, pull the battery from your phone. leave it out for a little while while we prepare the next steps.
If you want oreo, scroll to where it says OREO in capital letters. if you want nougat, scroll to where it says NOUGAT.
NOUGAT
use the file that you downloaded if you selected nougat - it should be a zip. it will be called h910-10r. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the h910 zip file and install it. then go ahead and reboot your phone, you will have a rooted android 7 rom. you will also have signal. then download supersu from the play store and open it to have root.
OREO
use the file that you downloaded if you selected oreo - it should be a zip. it will be called something along the lines of full stock oreo rooted. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. also, go to your root package folder and find the twrp image file and put that on your sd card. then go get the mk200 zip file and also place that on your sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the oreo full rooted zip and install it then, install the mk2000 file. after you have done this, click install image and select the twrp. the reason you need to re flash this is because that oreo file re installs the stock recovery. then install the twrp. now reboot your phone. you will have a rooted android 8 rom. you will also have signal. then download a magisk 6.0 manager apk from chrome browser to have root.
IF this worked and your enjoying root give me a thanks.
Click to expand...
Click to collapse
hey reply to me fast is it ok to flash h915 firmware in my h910 10I cuz already hard bricked the previous h918 motherboard cuz I don't know I accidentally flashed h990 firmware plz tell me also is it necessary to flash h915 in h910 to root and TWRP.
Isn't that what it says in the OP?
pakwarrior said:
hey reply to me fast is it ok to flash h915 firmware in my h910 10I ....
Click to expand...
Click to collapse
MaverickNextDoor said:
Isn't that what it says in the OP?
Click to expand...
Click to collapse
Dont try to install h915 instead just try dirty santa method which will install temporary twrp recovery there install h910 20h pre rooted 8.0 rom and install mk2000 v2.2 kernel and install newer version of twrp and you are good to go
No bricking risk and nothing dont try to do corss flashing of h915 its not that accurate also there is model issue in crossflashing instead doing that do dirsty santa and install h910 20h simple
pakwarrior said:
Dont try to install h915 instead just try dirty santa method which will install temporary twrp recovery there install h910 20h pre rooted 8.0 rom and install mk2000 v2.2 kernel and install newer version of twrp and you are good to go
No bricking risk and nothing dont try to do corss flashing of h915 its not that accurate also there is model issue in crossflashing instead doing that do dirsty santa and install h910 20h simple
Click to expand...
Click to collapse
So how do you use dirty santa method for h910 20h? All the guides I've seen want you to crossflash.
jxsilicon9 said:
So how do you use dirty santa method for h910 20h? All the guides I've seen want you to crossflash.
Click to expand...
Click to collapse
I didn't do crossflashing i first installed twrp throught dirty santa which then you have to open from recovery then there is android 8.0 h910 stock rom pre rooted i used or you can use your custom rom to flash then there is an kernel mk2000 file also to flash from twrp after you installed new rom for fixing errors like static screen and like that thats it also if you flash android 8.0 stock of h910 rom you will get a password during booting process just attempt it wrongs for many trys wrotten on it until you see wipe the data prompt and you will factory reset your phone and its ready to go maybe you will be promoted to twrp so you have to factory reset through wipe option ok and you are good to go one thing do it only on h910 not other model there is 0% chance of hard bricking your phone if you did this and no signal problem
Also to understand more go a see my qna with author of this post in this post obviously ok or if you meed more help reply me i will text you
pakwarrior said:
I didn't do crossflashing i first installed twrp throught dirty santa which then you have to open from recovery then there is android 8.0 h910 stock rom pre rooted i used or you can use your custom rom to flash then there is an kernel mk2000 file also to flash from twrp after you installed new rom for fixing errors like static screen and like that thats it also if you flash android 8.0 stock of h910 rom you will get a password during booting process just attempt it wrongs for many trys wrotten on it until you see wipe the data prompt and you will factory reset your phone and its ready to go maybe you will be promoted to twrp so you have to factory reset through wipe option ok and you are good to go one thing do it only on h910 not other model there is 0% chance of hard bricking your phone if you did this and no signal problem
Also to understand more go a see my qna with author of this post in this post obviously ok or if you meed more help reply me i will text you
Click to expand...
Click to collapse
Ok,you know where to get the latest firmware and files? Most dirtysanta tutorials bat have the downgrade added. How do I just add the twrp without the downgrade? Any dirtysanta bat and files?
jxsilicon9 said:
Ok,you know where to get the latest firmware and files? Most dirtysanta tutorials bat have the downgrade added. How do I just add the twrp without the downgrade? Any dirtysanta bat and files?
Click to expand...
Click to collapse
no no need to downgrade anything just find any video which says TWRP installation for LG v20 h910 dirty Santa and flash it but wait I seen in all zip files of dirty Santa there will a final step in that folder called step 3 that file is a batch file just open it in notepad and you will see there is written TWRP for I think us995 just rename it all of them to that name which TWRP in that folder ok for example if the name of the TWRP in dirty Santa folder is twrph910.img
you have to rewrite the same and exact name with .img in that batch file this ting will not tell any YouTuber or in the website cuz, I find it in curiosity and founded that the TWRP name was wrong so I just renamed it in that batch file and it worked before it it wasn't working also download the exact LG v20 h910 TWRP, not any other model TWRP or you will hard brick it man it feels so bad I one time hard bricked my LG next day I bought the device now I just sold it I change the mobo to LG h910 then I did all that root things and then I sell that phone no I have sony xz3 which is way better and have snapdragon 845 octa-core which is the thing I needed in just 135$ I found that it was japan model refurbished but has all things new and original like poled panel and stuff... well if you need more help just don't reply m on XDA you will not get the answer quickly here my social media account
discord: PAKWARRIOR#6115
Facebook: https://www.facebook.com/hafiz.saad.712161/
Instagram: https://www.instagram.com/zero_saad_sixs/
reply me on that I am online all the time but not online on XDA all the time ok
Installed twrp no problem. Had installation issues (error 7) and edited the file. Tried it again and came up with error 1. Saw someone else on xda say to extract the boot img and mount to the recovery partition successfully. Welp, I guess I wasn't so lucky. I can not get into twrp recovery or any recovery and my v20 (910) boots into the Lg android splash screen. My desktop can not see any adb device but it registers a device being plugged in. What's the verdict, soft or hard bricked? Everything was cleared besides twrp prior to error 7 and 1.
Lgv20usr said:
Installed twrp no problem. Had installation issues (error 7) and edited the file. Tried it again and came up with error 1. Saw someone else on xda say to extract the boot img and mount to the recovery partition successfully. Welp, I guess I wasn't so lucky. I can not get into twrp recovery or any recovery and my v20 (910) boots into the Lg android splash screen. My desktop can not see any adb device but it registers a device being plugged in. What's the verdict, soft or hard bricked? Everything was cleared besides twrp prior to error 7 and 1.
Click to expand...
Click to collapse
Re-flash the H91510e_00_VTR_CA_OP_1205.kdz with LG UP. And again.