Hi guys, the three main recoveries for Lenovo A706 are given below with download links
No need to go to other sites when all 3 recoveries are present at the same place.
All recoveries are of latest version.
1. ClockWorkMod Recovery (CWM) click here to download
2. Team Win Recovery Project (TWRP) click here to download
3. Philz Touch Recovery click here to download
Tutorial to flash recovery on Lenovo A706
1. Download any one of the recovery from above.
2. Extract only "recovery.img" from the archive.
3. Copy the "recovery.img" file on your Lenovo A706.
4. Download and install 'Rashr' on your A706.
5. Run 'Rashr' make a backup of your stock recovery using a option there and then flash the recovery, navigate to the location where "recovery.img" file is present.
It will take a few minutes and then bingo!! you are done flashing your recovery.
Don't forget to hit the thanks button. :good:NOTE : Every thread I start is "DWYOR" so don't blame me if you got ur device bricked...
"DWYOR" means "DO WITH YOUR OWN RISK"
Related
after so many hours of work i have dumped the stock recovery.img and i have build working CWM recovery using recovery builder
thanks to Kaushik Dutta
so INTEX AQUA FLASH now can enjoy CWM on thier mobiles
procedure to flash new recovery...
- Rename the recovery file you downloaded file to recovery.img
- Copy file to the root of your sdcard. ( Root of sdcard means in the sdcard, outside any folders.)
- Open up play store and download the MobileUncle MTK Tools.
- Start the MobileUncle app you just downloaded. Tap the option “Update Recovery”.
- Browse to the file you downloaded and renamed in above steps.
- CWM will be flashed and your phone will reboot.
get mobileuncle MTK.apk from google playstore
download cwm recovery for intex aqua flash from below attachment...
:fingers-crossed::fingers-crossed::fingers-crossed::angel::victory::victory::victory:
I'm not responsible if it bricks ur device...
drganbds said:
after so many hours of work i have dumped the stock recovery.img and i have build working CWM recovery using recovery builder
thanks to Kaushik Dutta
so INTEX AQUA FLASH now can enjoy CWM on thier mobiles
procedure to flash new recovery...
- Rename the recovery file you downloaded file to recovery.img
- Copy file to the root of your sdcard. ( Root of sdcard means in the sdcard, outside any folders.)
- Open up play store and download the MobileUncle MTK Tools.
- Start the MobileUncle app you just downloaded. Tap the option “Update Recovery”.
- Browse to the file you downloaded and renamed in above steps.
- CWM will be flashed and your phone will reboot.
get mobileuncle MTK.apk from google playstore
download cwm recovery for intex aqua flash from below attachment...
:fingers-crossed::fingers-crossed::fingers-crossed::angel::victory::victory::victory:
I'm not responsible if it bricks ur device...
Click to expand...
Click to collapse
Not orking cwm
Hi Guys, I faced lots of problems while flashing CWM recovery then I found a way on a blog.
So all credits for this Tutorial goes to Dean of appsapkmirror.com.
Note: Before proceeding please enable USB-Debugging option
Now here is the Tutorial for Flashing Custom Recovery on MI3/MI4:
1) You need to have a Developer Rom installed on your phone.
for that download the Developer Rom from the links below. Flash it using the Updater option in your phone and select the update package.
2) After you have installed the Developer Rom you need to have custom recovery for that what you need to do the following:
Download the CWM Recovery from the links below and extract the .zip file.
Download and install the [ROOT] Rashr – Flash Tool apk file from below and install it.
After that Go to the Security app and provide Root permission to the Rashr – Flash Tool application.
Now open the Rashr- Flash Tool and grant Root Permissions asked.
After that choose “Recovery from Storage” and select the file recovery.img from the .zip you extracted earlier and flash that file.
3) That’s it now you have CWM Recovery installed as your recovery.Now you can flash any Rom you want.
For more information and screenshots with detailed steps and Download links visit:
http://www.appsapkmirror.com/easily-flash-custom-recovery-in-xiaomi-mi4/
How to rollback to MI Recovery...
can you provide the tutorial...please
Here is the Tutorial Video
mamedz said:
How to rollback to MI Recovery...
can you provide the tutorial...please
Click to expand...
Click to collapse
Link to the Video Tutorial:
https://www.youtube.com/watch?v=8DAXoLjknus
Link to the written tutorial:
http://www.appsapkmirror.com/flashing-stock-mi-recovery-in-xiaomi-mi3mi4/
Hey Xda brothers
..................................................................................................................................................................................................
This step by step guide will let you install recovery on your Canvas A104 {Fire 2}
There are lots of method for installing a recovery but it is the easiest one.
You can install all available recoveries for canvas A104 with this method.
A custom recovery allows you to flash custom roms ,files etc...
Requirements:
1. A rooted phone.
2. A Custom recovery
Link for all recoveries
https://drive.google.com/folderview...hnQzJUM3ItbnRSZXFqN3BqQm16czY2ejA&usp=sharing
3. Rashr and ES file explorer. {You can also use Flashify ]
Steps:
1. First of all download a recovery and paste it anywhere on your SD card.
2. Open the ES file explorer and extract the recovery.img from the downloaded zip file.
3. Now install Rashr and grant Root access.
4. You will see an option in the list saying
" Recovery from storage "
5. Click on that.
5. Now browse to the extracted recovery.img and click on yes please.
6. After that click on yes please again.
7. The recovery will be flashed and you will be booted into recovery mode.
8. WHoa!
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices.It provides a touch screen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Here i sharing all TWRP recoveries ported to Pop C1
TWRP 2.6.3.0:
https://mega.nz/#!fkcUEBYT!lTQZIslaNdzVYIZBkS099g3u260RwJh6WNuUjg77hs4
TWRP 2.8.2.0:
https://mega.nz/#!Tk8HzJAR!TH8J1ojMQ4leQyIm1kYjcGd2pu7tdwVgTqqe9PdYOCY
TWRP 3.0.0-0:
https://mega.nz/#!2hcGXLLK!s--fk3FmkV6BeCvUKrzTh8X6tnWYCts2XsVijHE9pHE
TWRP 3.0.2-1:
https://mega.nz/#!S5sEAaQB!OURmOAyHACH4fBxU1RcazLMXoj8nNDazNqtyYQsar6M
TWRP 3.1.0-0:
https://mega.nz/#!j9VhEJbR!1tqGktPi-5lIetpfRsSg_ymdMnA_Jdnx2Od1fU531ro
TWRP 3.1.1-0:
https://mega.nz/#!T4tUDDQL!QLmxJjLLqf6_BARGi__j04Ljt1TAz9wN8d_UI0QrHSs
Instruction to flash recovery:
Using Custom Recovery:
1) Download zip and paste it in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot recovery
Using Rashr
1) Download Rashr
2) Extract zip
3) Open Rashr
4) Goto to the folder where you extracted zip
5) Select recovery.img
6) Flash it
7) Reboot to recovery
Credits:
1) GETAKGT1
2) Team Win Team
3) Kirito9
4) Team Dev Pop
hmd_msrf_k said:
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices.It provides a touch screen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Here i sharing all TWRP recoveries ported to Pop C1
TWRP 2.6.3.0:
https://mega.nz/#!fkcUEBYT!lTQZIslaNdzVYIZBkS099g3u260RwJh6WNuUjg77hs4
TWRP 2.8.2.0:
https://mega.nz/#!Tk8HzJAR!TH8J1ojMQ4leQyIm1kYjcGd2pu7tdwVgTqqe9PdYOCY
TWRP 3.0.0-0:
https://mega.nz/#!2hcGXLLK!s--fk3FmkV6BeCvUKrzTh8X6tnWYCts2XsVijHE9pHE
TWRP 3.0.2-1:
https://mega.nz/#!S5sEAaQB!OURmOAyHACH4fBxU1RcazLMXoj8nNDazNqtyYQsar6M
TWRP 3.1.0-0:
https://mega.nz/#!j9VhEJbR!1tqGktPi-5lIetpfRsSg_ymdMnA_Jdnx2Od1fU531ro
TWRP 3.1.1-0:
https://mega.nz/#!T4tUDDQL!QLmxJjLLqf6_BARGi__j04Ljt1TAz9wN8d_UI0QrHSs
Instruction to flash recovery:
Using Custom Recovery:
1) Download zip and paste it in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot recovery
Using Rashr
1) Download Rashr
2) Extract zip
3) Open Rashr
4) Goto to the folder where you extracted zip
5) Select recovery.img
6) Flash it
7) Reboot to recovery
Credits:
1) GETAKGT1
2) Team Win Team
3) Kirito9
4) Team Dev Pop
Click to expand...
Click to collapse
Where can I find TWRP 3.1.1-0 for this model, the links are broken
silhouette said:
Where can I find TWRP 3.1.1-0 for this model, the links are broken
Click to expand...
Click to collapse
Hello, it's nice to see you guys still using Pop C1 after all these years.
Here you go:
File on MEGA
mega.nz
Good luck
hmd_msrf_k said:
Hello, it's nice to see you guys still using Pop C1 after all these years.
Here you go:
File on MEGA
mega.nz
Good luck
Click to expand...
Click to collapse
Thanks, I did not think I'd get a reply. While on the topic, can someone suggest the best custom rom with the fewest bugs. About using c1 rom after all these years, it really is for a customer who has a whole lot and needs a higher android version so the newer apps work. FB Team Dev Pop has also been really helpful finding recoveries and roms, tough a lot of the old links are broken as you would expect
PHONE SPECIFICATIONS :
MODEL: LAVA V23GB
KERNEL VERSION : 3.18.19
ANDROID 6.0
STAR OS
MT 6735M
The rooting method is for the phone with above specifications
ROOTING METHOD
1)FLASHING TWRP
2)FLASH SUPERSU
TWRP FLASHING:
LAVA V23GB is a very good phone and has very good configuration but it is less popular and less used by developers because of other similar models like lava pixel v2 2gb and lava pixel v2 3gb.
So I made the twrp myself.
Inorder to flash twrp u have to install spflash tool in your pc
After installing spflash tool run flash_tool.exe select scatter file and tick on recovery (download link for twrp and scatter file below)
Then keep download only and click download button and connect your phone to pc
The flashing process will start automatically
After flashing twrp dont power on your phone. Just disconnect the usb and enter into recovery mode by clicking power + volume button and select recovery mode (If u simply power on your stock recovery would replace twrp so dont directly power on)
Now u will enter into recovery mode
Thats it u flashed twrp
2)flashing Supersu :
Download the supersu zip file and copy it to sd card
Then go to recovery mode into twrp
Click install and select storage and select sd card then select the supersu.zip file and swipe to flash
Clear cache/dalvik cache
Then reboot your phone
Your phone will be rooted. you can check using root checker app
Download links :
Twrp and Scatter file :https:// drive .google .com/ open?id=0B_Ic1h9dY4J8VVNtWDB1dmt2UDQ (remove spaces )
Supersu : https:// drive.google.com/ open?id=0B_Ic1h9dY4J8WWRGN0k5dUZ4aVE
Twrp made by Azizur Rehman Shikdhar
Ported by Mudunuri Sriram (me)
Porting guide by Keng Natan Singse and Utkarsh
My contact details
fb.com/ mudunurisriram
phone no:8106357947
thanx a lot man..
please make scatter file and twrp for lava x81 also i will be very thankful of you
send the stock recovery
GAGAN MALLI said:
please make scatter file and twrp for lava x81 also i will be very thankful of you
Click to expand...
Click to collapse
send the stock recovery