I can't make calls nor use internet in my Sony Xperia J as even though i inserted my Sim card[which by the way is fine with other mobiles]
the phone is showing No Service
So I have been googling a lot for a solution and many suggested the following
1. Flashing with lastest firmware [ST26i_11.0.A.7.5_CE.ftf] .......which did no change and the problem persists
2. Flashing with Custom ROM [jlo]........Didn't yet try that
3. Flashing the RADIO's and BASEBAND.......which i don't know how......So looking for your all HELP!...please
if so please guide me and post necessary files or links regarding the baseband.ftf & Radios.......MOD's...please...
THANKS in advance
Try complete format and flash ftf file if this doesnt works try to flash cm10
if this doesnt works show ur phone to sony
Is it possible your phone has a sim lock?
satan89 said:
Is it possible your phone has a sim lock?
Click to expand...
Click to collapse
that would be my gues lol
gavster26 said:
that would be my gues lol
Click to expand...
Click to collapse
it was working fine fnr a week and then this.....any body know about baseband and radio flashing
Your simcard MAY BE dead, try putting it on another phone. If your sim is dead you should ask for a replacement for it. If it works thenr
take your phone to the service center.
Sent from my ST23i
sabbuspy said:
it was working fine fnr a week and then this.....any body know about baseband and radio flashing
Click to expand...
Click to collapse
iv searched for a baseband ftf file for flashtool thats how you flash one but no one has extracted the baseband yet but you can try flashing 7.5 firmware and uncheck wipe data & Wipe cach and cheak exclued fota, system, kernel. which in theory just flash the baseband.
I have same problem
[Q] Sony Xperia J.....No Service
I can't make calls nor use internet in my Sony Xperia J as even though i inserted my Sim card[which by the way is fine with other mobiles]
the phone is showing No Service
So I have been googling a lot for a solution and many suggested the following
1. Flashing with lastest firmware [ST26i_11.0.A.7.5_CE.ftf] .......which did no change and the problem persists
2. Flashing with Custom ROM [jlo]........Didn't yet try that
3. Flashing the RADIO's and BASEBAND.......which i don't know how......So looking for your all HELP!...please
if so please guide me and post necessary files or links regarding the baseband.ftf & Radios.......MOD's...please...
Click to expand...
Click to collapse
If you have unlocked bootloader,then relock it and try if it works. If not,try to unlock bootloader if u can! :laugh:
try this !!! for CM10 GSM fix
I've successfully flashed the CM10 with GSM fix.. hope this helps you
Xperia TIPO
Ok, after restore my phone from brick i found another problem. Sim card invalid. No- sim card works fine on other phones, but other sim cards doesnt work on my phone. Slot is fine.
But week ago same problem with same story. But in non-authorised service they flash my phone with stock rom i think and its works. but i wanna flash now my phone too. Any solutions? New update or old?
Hai there bro,so u wanna flash your phone?or get around the problem without flashing?...sorry I didn't get u!!
hit the thanks if I helped you,don't just say it...
sent from my E dual C1604
Zmeyev said:
Xperia TIPO
Ok, after restore my phone from brick i found another problem. Sim card invalid. No- sim card works fine on other phones, but other sim cards doesnt work on my phone. Slot is fine.
But week ago same problem with same story. But in non-authorised service they flash my phone with stock rom i think and its works. but i wanna flash now my phone too. Any solutions? New update or old?
Click to expand...
Click to collapse
u want to flash with other ROMs u mean??....
to help you we will need other info like how did u brick your phone,how did u fix it?...what rom were u running b4 dat?..wat rom do u want to use now?..
ur sim card not working (or rather the phones's radio not working) has to be software issue as its working on stock.So to use/flash new Rom u have to be careful about using roms specifically for ur model....it would be helpful if u have a logcat of the problem,but since u have flashed stock no hopes of that....
newaz ans the above questions,we can try to help you!!
My phone model is O+ 8.31z (MT6572_S00), and now its dead. No boot, No recovery. I think I deleted the whole os. Im using sp flash tool to flash it, back then I had no problem and I can flash it again and again using the same tool. But lately I experienced no sim card detected problem, even if I reflashed it, still sim cards are still not detected. So my mistake Im so desperate I experimented with SP flash tool's option "format whole flash", and it formats the device expecting it will resolve the issue. So then I tried to flash it again to restore the stock rom I have, but it is now looking for a bootloader. It shows me this error "Bootloader doesnt exists on nandflash". Now how can I revive this phone, with my only option is to flash my stock rom to it. Is there any other options here? please help me
Here's my phone specs
O+ 8.31z Specs
3.5″ 320 x 480 pixels (HVGA) capacitive touchscreen LCD TFT display
1GHz Dual Core ARM Cortex A7-based MediaTek MT6577 processor
Dual SIM , Dual Standby
Android Jelly Bean 4.2.2
256MB RAM
256MB ROM
Expandable storage up to 32GB
3.2MP auto focus main camera with LED Flash, 0.3MP Secondary camera
WiFi 802.11 b/g/n, WiFi Hotspot
3G, HSDPA, HSUPA
Bluetooth
3.5mm Audio Jack
Stereo FM Radio
1,500 mAh Li-Ion battery
flashtool version?
owplus said:
My phone model is O+ 8.31z (MT6572_S00), and now its dead. No boot, No recovery. I think I deleted the whole os. Im using sp flash tool to flash it, back then I had no problem and I can flash it again and again using the same tool. But lately I experienced no sim card detected problem, even if I reflashed it, still sim cards are still not detected. So my mistake Im so desperate I experimented with SP flash tool's option "format whole flash", and it formats the device expecting it will resolve the issue. So then I tried to flash it again to restore the stock rom I have, but it is now looking for a bootloader. It shows me this error "Bootloader doesnt exists on nandflash". Now how can I revive this phone, with my only option is to flash my stock rom to it. Is there any other options here? please help me
Here's my phone specs
O+ 8.31z Specs
3.5″ 320 x 480 pixels (HVGA) capacitive touchscreen LCD TFT display
1GHz Dual Core ARM Cortex A7-based MediaTek MT6577 processor
Dual SIM , Dual Standby
Android Jelly Bean 4.2.2
256MB RAM
256MB ROM
Expandable storage up to 32GB
3.2MP auto focus main camera with LED Flash, 0.3MP Secondary camera
WiFi 802.11 b/g/n, WiFi Hotspot
3G, HSDPA, HSUPA
Bluetooth
3.5mm Audio Jack
Stereo FM Radio
1,500 mAh Li-Ion battery
Click to expand...
Click to collapse
try to upgrade firmware with scatter loading
& i m afraid u have lost imei so u have to fix it search for imei fix for that
nilaydani said:
try to upgrade firmware with scatter loading
& i m afraid u have lost imei so u have to fix it search for imei fix for that
Click to expand...
Click to collapse
Hello thanks for the reply. I was able to revived my phone, but the sim cards are still not detected. Now I tried flashing some roms(downloaded on the net) from devices which have the same chipset like mine(mt6572) hoping it would resolve the sim card issue and Im pretty confident in flashing even Im not sure exactly that these roms could work in my device. I was confident in flashing different roms since I was able to revive my phone and would be able again as long as I have my stock rom.
So unfortunately the rom(not my stock rom) I flashed to my device didn't work. So I tried to flash my stock rom back to my device, but now SP flashtool shows me an error saying "PMT is ready and layout has been changed". Why this error would come up? I've never experienced this before, since I've been doing flashing my stock rom back then.
I was thinking that it has something to do with the scatter file. The rom(not my stock rom) I was flashing says in its scatter file that it has a block size of 0x40000, while my stock rom's scatter file has a block size of 0x20000. So because of that, I changed my stock rom's block size to 0x40000 and flashed it again and it worked, but when I opened my device, it was stuck in the boot logo. Now I cant use my phone,. I tried formatting the whole flash and flash my stock rom again but still stuck on its boot logo. Please tell me how could I possibly solve this problem. Sorry for my grammar. And sorry moderators, should I make a new thread for this?
attntn
owplus said:
Hello thanks for the reply. I was able to revived my phone, but the sim cards are still not detected. Now I tried flashing some roms(downloaded on the net) from devices which have the same chipset like mine(mt6572) hoping it would resolve the sim card issue and Im pretty confident in flashing even Im not sure exactly that these roms could work in my device. I was confident in flashing different roms since I was able to revive my phone and would be able again as long as I have my stock rom.
So unfortunately the rom(not my stock rom) I flashed to my device didn't work. So I tried to flash my stock rom back to my device, but now SP flashtool shows me an error saying "PMT is ready and layout has been changed". Why this error would come up? I've never experienced this before, since I've been doing flashing my stock rom back then.
I was thinking that it has something to do with the scatter file. The rom(not my stock rom) I was flashing says in its scatter file that it has a block size of 0x40000, while my stock rom's scatter file has a block size of 0x20000. So because of that, I changed my stock rom's block size to 0x40000 and flashed it again and it worked, but when I opened my device, it was stuck in the boot logo. Now I cant use my phone,. I tried formatting the whole flash and flash my stock rom again but still stuck on its boot logo. Please tell me how could I possibly solve this problem. Sorry for my grammar. And sorry moderators, should I make a new thread for this?
Click to expand...
Click to collapse
u cant flash other device' Rom from flash tool even if it is made for same chip-set the whole firmware is made for ur device specific only work u have soft bricked ur device now try to upgrade frm stock only & scatter shd be of stock rom only then it will be flashed & u r saying sim is nt detected for that prob i told u hv lost ur imei no. now write imei through its tool search for it...
nilaydani said:
u cant flash other device' Rom from flash tool even if it is made for same chip-set the whole firmware is made for ur device specific only work u have soft bricked ur device now try to upgrade frm stock only & scatter shd be of stock rom only then it will be flashed & u r saying sim is nt detected for that prob i told u hv lost ur imei no. now write imei through its tool search for it...
Click to expand...
Click to collapse
Yeah, my mistake that I tried to flash other device's rom. I knew I could flash my stock rom again, using my stock scatter file , but this time it won't work. I explained earlier why I couldn't flash my stock rom now. Sorry I forgot to mention about your solution about the imei. When my phone was still alive(but no sim card detected), I already tried imei writing tools but no luck
So my bigger problem now was explained earlier in my previous reply:
owplus said:
I was able to revived my phone, but the sim cards are still not detected. Now I tried flashing some roms(downloaded on the net) from devices which have the same chipset like mine(mt6572) hoping it would resolve the sim card issue and Im pretty confident in flashing even Im not sure exactly that these roms could work in my device. I was confident in flashing different roms since I was able to revive my phone and would be able again as long as I have my stock rom.
So unfortunately the rom(not my stock rom) I flashed to my device didn't work. So I tried to flash my stock rom back to my device, but now SP flashtool shows me an error saying "PMT is ready and layout has been changed". Why this error would come up? I've never experienced this before, since I've been doing flashing my stock rom back then.
I was thinking that it has something to do with the scatter file. The rom(not my stock rom) I was flashing says in its scatter file that it has a block size of 0x40000, while my stock rom's scatter file has a block size of 0x20000. So because of that, I changed my stock rom's block size to 0x40000 and flashed it again and it worked, but when I opened my device, it was stuck in the boot logo. Now I cant use my phone,. I tried formatting the whole flash and flash my stock rom again but still stuck on its boot logo. Please tell me how could I possibly solve this problem.
Click to expand...
Click to collapse
Sorry for the grammar
Pls anyone?
help me please. :crying:
o+ 8.6 dead
hello, plz somebody help me... how to retrieve my phone after i flash it with SPFT, i've mistakenly use the format flash except bootloader.
Now i have no idea how to open my again, my phone is o+ 8.6 android (4.1.1 JB):crying::crying::crying: plzzzz.... have some heart!
I did the same mistake
owplus said:
Hello thanks for the reply. I was able to revived my phone, but the sim cards are still not detected. Now I tried flashing some roms(downloaded on the net) from devices which have the same chipset like mine(mt6572) hoping it would resolve the sim card issue and Im pretty confident in flashing even Im not sure exactly that these roms could work in my device. I was confident in flashing different roms since I was able to revive my phone and would be able again as long as I have my stock rom.
So unfortunately the rom(not my stock rom) I flashed to my device didn't work. So I tried to flash my stock rom back to my device, but now SP flashtool shows me an error saying "PMT is ready and layout has been changed". Why this error would come up? I've never experienced this before, since I've been doing flashing my stock rom back then.
I was thinking that it has something to do with the scatter file. The rom(not my stock rom) I was flashing says in its scatter file that it has a block size of 0x40000, while my stock rom's scatter file has a block size of 0x20000. So because of that, I changed my stock rom's block size to 0x40000 and flashed it again and it worked, but when I opened my device, it was stuck in the boot logo. Now I cant use my phone,. I tried formatting the whole flash and flash my stock rom again but still stuck on its boot logo. Please tell me how could I possibly solve this problem. Sorry for my grammar. And sorry moderators, should I make a new thread for this?
Click to expand...
Click to collapse
wud u pls tel me how u revived ur phone again???? thx in advance
sad to know it.....
Thanks to your experimentation......... i think i should also avoid flashing any other phone's ROM........ to my new phone )
Problem solved!!!
owplus said:
My phone model is O+ 8.31z (MT6572_S00), and now its dead. No boot, No recovery. I think I deleted the whole os. Im using sp flash tool to flash it, back then I had no problem and I can flash it again and again using the same tool. But lately I experienced no sim card detected problem, even if I reflashed it, still sim cards are still not detected. So my mistake Im so desperate I experimented with SP flash tool's option "format whole flash", and it formats the device expecting it will resolve the issue. So then I tried to flash it again to restore the stock rom I have, but it is now looking for a bootloader. It shows me this error "Bootloader doesnt exists on nandflash". Now how can I revive this phone, with my only option is to flash my stock rom to it. Is there any other options here? please help me
Here's my phone specs
O+ 8.31z Specs
3.5″ 320 x 480 pixels (HVGA) capacitive touchscreen LCD TFT display
1GHz Dual Core ARM Cortex A7-based MediaTek MT6577 processor
Dual SIM , Dual Standby
Android Jelly Bean 4.2.2
256MB RAM
256MB ROM
Expandable storage up to 32GB
3.2MP auto focus main camera with LED Flash, 0.3MP Secondary camera
WiFi 802.11 b/g/n, WiFi Hotspot
3G, HSDPA, HSUPA
Bluetooth
3.5mm Audio Jack
Stereo FM Radio
1,500 mAh Li-Ion battery
Click to expand...
Click to collapse
Hey bro. u r nt able to use ur sim card as after full flash u destroyed ur imei which was located in NAND.
you can use the IMEI/SN write tool to write back ur imei.
click THANKS if i helped
Plz Help me .... I did the same mistake...
owplus said:
My phone model is O+ 8.31z (MT6572_S00), and now its dead. No boot, No recovery. I think I deleted the whole os. Im using sp flash tool to flash it, back then I had no problem and I can flash it again and again using the same tool. But lately I experienced no sim card detected problem, even if I reflashed it, still sim cards are still not detected. So my mistake Im so desperate I experimented with SP flash tool's option "format whole flash", and it formats the device expecting it will resolve the issue. So then I tried to flash it again to restore the stock rom I have, but it is now looking for a bootloader. It shows me this error "Bootloader doesnt exists on nandflash". Now how can I revive this phone, with my only option is to flash my stock rom to it. Is there any other options here? please help me
Here's my phone specs
O+ 8.31z Specs
3.5″ 320 x 480 pixels (HVGA) capacitive touchscreen LCD TFT display
1GHz Dual Core ARM Cortex A7-based MediaTek MT6577 processor
Dual SIM , Dual Standby
Android Jelly Bean 4.2.2
256MB RAM
256MB ROM
Expandable storage up to 32GB
3.2MP auto focus main camera with LED Flash, 0.3MP Secondary camera
WiFi 802.11 b/g/n, WiFi Hotspot
3G, HSDPA, HSUPA
Bluetooth
3.5mm Audio Jack
Stereo FM Radio
1,500 mAh Li-Ion battery
Click to expand...
Click to collapse
I did the same mistake and my phone is dead .. NO boot , NO recovery ... HOw did you restore IT ??
How did you revive your phone?
my phone is dead and still detectable on PC
I'm using this SPFT but unfortunately after I press download and I've got this error message, what does it mean?
Bootloader doesn't exist on nand flash. please download bootloader first...
Shaunak Falconzz Pandey said:
Hey bro. u r nt able to use ur sim card as after full flash u destroyed ur imei which was located in NAND.
you can use the IMEI/SN write tool to write back ur imei.
click THANKS if i helped
Click to expand...
Click to collapse
What if you dont know your IMEI no.?
Heremias said:
What if you dont know your IMEI no.?
Click to expand...
Click to collapse
Nope, not if you don't know the IMEI, that I know of.
You should have used SP flashtool to make a backup of your stock system/firmware. You could restore it and it might restore the IMEI if that information is contained in the backup.
Sent from my LGL84VL using Tapatalk
Shaunak Falconzz Pandey said:
Hey bro. u r nt able to use ur sim card as after full flash u destroyed ur imei which was located in NAND.
you can use the IMEI/SN write tool to write back ur imei.
click THANKS if i helped
Click to expand...
Click to collapse
Droidriven said:
Nope, not if you don't know the IMEI, that I know of.
You should have used SP flashtool to make a backup of your stock system/firmware. You could restore it and it might restore the IMEI if that information is contained in the backup.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply
I have the same problem, my oppo f1 plus is dead , but i cant fix it in sp flash tool, please help
Heremias said:
Thanks for your reply
I have the same problem, my oppo f1 plus is dead , but i cant fix it in sp flash tool, please help
Click to expand...
Click to collapse
Do you know the IMEI?
Did you use SP flashtool to backup your stock system/firmware before this issue started?
If the answer to these are no, we can't help you.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Do you know the IMEI?
Did you use SP flashtool to backup your stock system/firmware before this issue started?
If the answer to these are no, we can't help you.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
I dont know the IMIE, and i only used the sp flash tool to downgrade my device, I think I flashed wrong firmware
Heremias said:
I dont know the IMIE, and i only used the sp flash tool to downgrade my device, I think I flashed wrong firmware
Click to expand...
Click to collapse
So...nope, can't help.
Sent from my LGL84VL using Tapatalk
Droidriven said:
So...nope, can't help.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Sad,, thank you
Heremias said:
Sad,, thank you
Click to expand...
Click to collapse
Have you tried flashing your original firmware?
Sent from my LGL84VL using Tapatalk
So, I've heard some people have dual boot working on their pixels. is it as simple as flashing 2 different roms on each partition (boot_a and boot_b) and switching which one you're using with twrp? or is there more to it?
That's pretty much all there is to it. you just have to use appropriate flags during the ROM update process to make sure you are not affecting the other slot. See this thread for my more detailed response.
Thank you! That's exactly what I needed.
I understand the purpose but at this point in time why would you want to dual boot?
Sent from my Pixel using Tapatalk
devilsadidas said:
I understand the purpose but at this point in time why would you want to dual boot?
Click to expand...
Click to collapse
One can have a modded slot with with custom sound mods and the like and the other can be without root and use ElementalX kernel to trick safety net into working