Database Info

[Q] Upgrade error - rooted phone - please help

Hello,
what happened:
1. Ascend G6 has been bought, rooted and super usered
2. default Android applications were uninstalled
3. coulpe weeks ago new Huawei updade was developmented and has been at disposal
EMUI 3.0 - G6-11V100R001C306B370 (from Jelly bean to Kitkat)
4. If I downloaded and update, instalation faal down because of ...talkback.apk is missing in system/app/...
.....
Cecking patch failes...
assert failed: apply_patch_check("/system/app/talkback.apk" ......
Installation aborted
....
- this app (Taklback) was uninstaled after new phone was rooted, but hot to install it back to the phone?
- via google play - does not work (app looks like instaled but no icon, no talkback.apk i system/app/)
- second way, copy talkback.apk to system/app/ from another phone - done, but no succes, ugrade still fall down for same reason
Question:
- did I make any backup befote I rooted the phone? - no
- did I make any backup before I uninstaled default huawei installed application as talkback.apk? - no
Can anybody give me an advice how to solve it pls?
Thank you
George

how did you tried to update to version 370? via the dload folder ? Did you tried to downgrade to version 118 first ? Do you have unlocked bootloader ?

osmera said:
how did you tried to update to version 370? via the dload folder ? Did you tried to downgrade to version 118 first ? Do you have unlocked bootloader ?
Click to expand...
Click to collapse
I tried t update via "System actualization" - tool menu in Huawei phone and click on "online actualization"
No, I didnt - you mean it could help? How to do it?
Unblocked bootloader - I dont know , how to findout it?
Thanks in advance
G.

1. redownload the rom file from official location. ( http://consumer.huawei.com/kh/suppor...h.htm?id=38361 )
It is the official for g6-l11
2. put the update.app into dload folder on your sd card (unpack from the zip)
3. shut down your phone
4. hold volume+ volume- and power button. When it start to boot release the power button, and hold both the volumes until the instalation starts
5. you will see that firmware flashing begin, wait for the end
after that you will have everything in place .
This does not need unlocked bootloader and should work for any version, even when previous instalation is corrupted..
Tell us if it worked.

when you roote your phone it willn't delete eny data

osmera said:
1. redownload the rom file from official location. (kh/suppor...h.htm?id=38361 )
It is the official for g6-l11
2. put the update.app into dload folder on your sd card (unpack from the zip)
3. shut down your phone
4. hold volume+ volume- and power button. When it start to boot release the power button, and hold both the volumes until the instalation starts
5. you will see that firmware flashing begin, wait for the end
after that you will have everything in place .
This does not need unlocked bootloader and should work for any version, even when previous instalation is corrupted..
Tell us if it worked.
Click to expand...
Click to collapse
Hello,
1. ZIP was dowloaded (G6-L11-ROM_V100R001C432B370CUSTC432D005_Firmware_Belgium_Germany_Netherlands_Portugal_05012GFT - kh.../ascend-g6-4g-kh.htm?id=38361)
2. then extracted, Update.app was copy to "DOWNLOAD" folder at SD card
3. phone was turned off
4. volume plus and minus was pushed, phone was turned on,
5. and message was screened at display and phone freezed
message: "check sd update pkg is exist... make sure usb cable has been inserted! usb update starting..."
freezy phone can be break only by restart.
Dont you know what am I doing wrong? Why update.app is not installed? Is it place in good folder at SD card?
Thank you
George

nuget85 said:
Hello,
2. then extracted, Update.app was copy to "DOWNLOAD" folder at SD card
Click to expand...
Click to collapse
This point is wrong, the name of the folder must be exactly as I wrote "dload" (without the quotes).

osmera said:
This point is wrong, the name of the folder must be exactly as I wrote "dload" (without the quotes).
Click to expand...
Click to collapse
Nice, your manual works! Ascend G6 have been upgraded with succes!
Last thing, do we know easiest way how to root new android version on this phone?
George

nuget85 said:
Last thing, do we know easiest way how to root new android version on this phone?
George
Click to expand...
Click to collapse
I have unlocked bootloader and custom recovery so for me the easiest way was to flash super-su with recovery.

osmera said:
I have unlocked bootloader and custom recovery so for me the easiest way was to flash super-su with recovery.
Click to expand...
Click to collapse
Hello Osmera,
could you little bit more describe (or show me where I can find) how to unlocked bootloader and... just your mentioned above manual please? Because I tried really many kind of PC root software, but none of them rooted my phone succesfully.
thank you very much,
George

nuget85 said:
Hello Osmera,
could you little bit more describe (or show me where I can find) how to unlocked bootloader and... just your mentioned above manual please? Because I tried really many kind of PC root software, but none of them rooted my phone succesfully.
Click to expand...
Click to collapse
You have to ask either Huawei (it takes time), or ask in facebook group
https://www.facebook.com/groups/328261053999820/permalink/422281734597751/
you will get code and with this code you can unlock bootloader(in fastboot mode).
Next install custom recovery (again you can find it there).
And next just flash super-su from custom recovery and you are rooted. It works always on any mobile.

osmera said:
You have to ask either Huawei (it takes time), or ask in facebook group
https://www.facebook.com/groups/328261053999820/permalink/422281734597751/
you will get code and with this code you can unlock bootloader(in fastboot mode).
Next install custom recovery (again you can find it there).
And next just flash super-su from custom recovery and you are rooted. It works always on any mobile.
Click to expand...
Click to collapse
Heelo Osmera,
I got unlock boatloader code from huawei support, but I dont know how to instal custom recovery and where to get it for my phone (G6-L11V100R001C432B370). All the manuals at innternet (even facebook side) are contradictioned and I have to say I am confused. Could you give me an advice please?
Thank you very much,
George

nuget85 said:
Heelo Osmera,
I got unlock boatloader code from huawei support, but I dont know how to instal custom recovery and where to get it for my phone (G6-L11V100R001C432B370). All the manuals at innternet (even facebook side) are contradictioned and I have to say I am confused. Could you give me an advice please?
Thank you very much,
George
Click to expand...
Click to collapse
for the root : kingroot.net
Without recovery

i use after alot of trying RootGenius
really is help me after i fail all time to root my phone
use google to find last version

Re: Huawei Honor/Mediapad X2 | EMUI 3.1/Android 5.1 beta build | B108sp01 updated

Re: Huawei Honor/Mediapad X2 | EMUI 3.1/Android 5.1 beta build | B108sp01 updated
ajsmsg78 said:
This is what I see when I open the B106 UPDATE.APP in Huawei Update Extractor. Maybe you're doing something wrong?
Click to expand...
Click to collapse
This is what I see... Can any one advise me please why I don't see cust.img and cache.img ?

elio321 said:
This is what I see... Can any one advise me please why I don't see cust.img and cache.img ?
Click to expand...
Click to collapse
Thats just the "update.app inside the incremental update.zip" file and not the "update.app" complete firmware.

mtyler7807 said:
Thats just the "update.app inside the incremental update.zip" file and not the "update.app" complete firmware.
Click to expand...
Click to collapse
Yeah what you're showing isn't the full B106, it looks like it's just the B106SP01 update file. You need the full B106:
https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FvI5Y3Obeku4qzIrtHfPviJPL3yhTpSABBi9V4fM0UpU%3D%3A%2FRom%2FOriginal%2FGEM-703L_EMUI3.1_Android5.1_V100R001C233B106.zip&name=GEM-703L_EMUI3.1_Android5.1_V100R001C233B106.zip&c=561730b7dfbe

For those who say that the update process is not working. I had to install everything perfectly like I wanted it with superboot.img and twrp recovery to get root access to remove everything I did not want. I edited the build.prop and local.prop, and del the mms.xml file and del the uninstall.XML file. I did all that to make sure it was it was English and texting was working and had no problem with Google apps disappearing. Then I went the su user and unrooted because once you are rooted you will have a problem with the sim cards and sending texts. After full unrooting reboot and restart into fastboot and flash the original boot.img and recovery.img from b108sp1 and reboot. Finished

mtyler7807 said:
For those who say that the update process is not working. I had to install everything perfectly like I wanted it with superboot.img and twrp recovery to get root access to remove everything I did not want. I edited the build.prop and local.prop, and del the mms.xml file and del the uninstall.XML file. I did all that to make sure it was it was English and texting was working and had no problem with Google apps disappearing. Then I went the su user and unrooted because once you are rooted you will have a problem with the sim cards and sending texts. After full unrooting reboot and restart into fastboot and flash the original boot.img and recovery.img from b108sp1 and reboot. Finished
Click to expand...
Click to collapse
You don't have to use any of the superboot img files. You can just flash UpdateSuperSU2.49 in TWRP and root that way.

OK I am ready to fastboot .img files to go from B106SP01 back to B106...one question will I loose any apps or data, photos etc?

elio321 said:
OK I am ready to fastboot .img files to go from B106SP01 back to B106...one question will I loose any apps or data, photos etc?
Click to expand...
Click to collapse
Most likely. Back your files up first.

I have many Problems on B108 the same as on B 106sp01
I install a fresh System and two Days later is it starting.
The keyboard does what she wants when I write,I press "a" there is "r",etc...
In the Browser I scroll down Everything will be bigger,or a link will open even though I do not press on it.
If I reboot it works again for one or two days,but that it may not be so.
On B015 I never had a problem and since 5.1.1 everything is going crazy.
Has anyone of you such problems?

letschky said:
I have many Problems on B108 the same as on B 106sp01
I install a fresh System and two Days later is it starting.
The keyboard does what she wants when I write,I press "a" there is "r",etc...
In the Browser I scroll down Everything will be bigger,or a link will open even though I do not press on it.
If I reboot it works again for one or two days,but that it may not be so.
On B015 I never had a problem and since 5.1.1 everything is going crazy.
Has anyone of you such problems?
Click to expand...
Click to collapse
Yeah, turn off double tap to wake the screen. That will stop it from going crazy.

ajsmsg78 said:
Yeah, turn off double tap to wake the screen. That will stop it from going crazy.
Click to expand...
Click to collapse
Ok,testing.
Thanks

Root for MT7-L09 B560

Hey all,
Has anyone tried rooting the new OTA firmware B560? If so, can you post which versions of TWRP and SuperSU were used? And if you happen to have the links to the downloads that would be great too!
T.I.A.

Hi, for twrp I've used the version from this thread http://forum.xda-developers.com/showthread.php?t=3156779 for supersu used the version 2.62 from chainfire website. Installed twrp through fastboot, then in twrp installed supersu. I believe newer versions of supersu works too.

Stuck on Huawei Logo
Bonnie1977 said:
Hey all,
Has anyone tried rooting the new OTA firmware B560? If so, can you post which versions of TWRP and SuperSU were used? And if you happen to have the links to the downloads that would be great too!
T.I.A.
Click to expand...
Click to collapse
Okay so I flashed TWRP with no problem, then rebooted normally. Powered off and entered TWRP recovery to flash SuperSU. It installs fine but then when I reboot it just stays stuck on Huawei Logo.
Please help!

Bonnie1977 said:
Okay so I flashed TWRP with no problem, then rebooted normally. Powered off and entered TWRP recovery to flash SuperSU. It installs fine but then when I reboot it just stays stuck on Huawei Logo.
Please help!
Click to expand...
Click to collapse
i am quoting myself here
qkrusty said:
does anybody know which supersu root is working with this latest B560?
Click to expand...
Click to collapse
SuperSU_v2.64_Pro and BETA-SuperSU-v2.52
what i did after upgrading to B560 ( from rooted B522)and loosing root is, flash twrp ,boot into twrp then flash superSu 2.64 pro zip in twrp , rebooted the phone but there was no superSu icon , i then went and install superSu 2.52 beta apk , rebooted the phone , then i opened superSu , it automatically updated the binaries and voila
ps: i reflashed the B522 stock recovery before upating to B560 with a full rom zip from http://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
edit : i used twrp from @somboons app ,it is twrp 2.8.7.0 here's the link http://forum.xda-developers.com/mate-7/development/tool-srk-tool-huawei-beta-02-20160501-t3369990

touns_j said:
i am quoting myself here
SuperSU_v2.64_Pro and BETA-SuperSU-v2.52
what i did after upgrading to B560 ( from rooted B522)and loosing root is, flash twrp ,boot into twrp then flash superSu 2.64 pro zip in twrp , rebooted the phone but there was no superSu icon , i then went and install superSu 2.52 beta apk , rebooted the phone , then i opened superSu , it automatically updated the binaries and voila
ps: i reflashed the B522 stock recovery before upating to B560 with a full rom zip from http://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
Click to expand...
Click to collapse
My problem is I never make it past the Huawei Logo. So I have no idea if SuperSU actually installs. I have reflashed stock recovery for B560, but that still doesn't seem to help. The next step I'm going to take now is to reinstall the update package for B560 and then if I'm able to boot up I'll try your method. Wish me luck!

Bonnie1977 said:
My problem is I never make it past the Huawei Logo. So I have no idea if SuperSU actually installs. I have reflashed stock recovery for B560, but that still doesn't seem to help. The next step I'm going to take now is to reinstall the update package for B560 and then if I'm able to boot up I'll try your method. Wish me luck!
Click to expand...
Click to collapse
good luck mate , you will sort it out
ps: once you've manually flashed SuperSu , and click on reboot , Twrp will throw a message saying " you don't have root bla bla bla " , and offer to " root " , never accept that , ignore the request

touns_j said:
good luck mate , you will sort it out
ps: once you've manually flashed SuperSu , and click on reboot , Twrp will throw a message saying " you don't have root bla bla bla " , and offer to " root " , never accept that , ignore the request
Click to expand...
Click to collapse
actually I never got that message when I clicked on reboot. Can you tell me which TWRP version you used?

Bonnie1977 said:
actually I never got that message when I clicked on reboot. Can you tell me which TWRP version you used?
Click to expand...
Click to collapse
i used twrp from @somboons app ,it is twrp 2.8.7.0 here's the link http://forum.xda-developers.com/mate...60501-t3369990

I used TWRP 3.0.2.0 from the package that Churdy linked in the main thread with all the different versions of software.
mega:///#!9kBWnY7T!ybhARn5UNXAyxrdQZ1ytKks24eCyzxkgdVhEza6zwFQ
I just had bricks from using genuine Chainfire SuperSU until I used the forum SuperSU Pro 2.64 which also comes with an unroot file.
mega:///#!0wITxJLR!S2iIVNjveSDMdne5QMNqd6so41vbTEK9tSJXJkOJJnw
I have not got Xposed to run properly yet though.

I'm freaking out!!! I can't get any USB debugging recognition, so I have no way of reinstalling the B560 firmware update. I have stock recovery now and my phone just keeps staying on the Huawei logo. Please somebody HELP!!!!

RobboW said:
I used TWRP 3.0.2.0 from the package that Churdy linked in the main thread with all the different versions of software.
mega:///#!9kBWnY7T!ybhARn5UNXAyxrdQZ1ytKks24eCyzxkgdVhEza6zwFQ
I just had bricks from using genuine Chainfire SuperSU until I used the forum SuperSU Pro 2.64 which also comes with an unroot file.
mega:///#!0wITxJLR!S2iIVNjveSDMdne5QMNqd6so41vbTEK9tSJXJkOJJnw
I have not got Xposed to run properly yet though.
Click to expand...
Click to collapse
i use the above and it doesnt work. still no root eventhough it manage to install
i noticed during installation
it says
remounting system r/w
is this mean it fail to mount??
ok now this work.
before install supersu
go to mount menu and enable system mount
then only install supersu
--------------------
sorry to say i still cannot get full root. cannot go copy paste to system. it still read only. supersu not responding at all!!!?
i disable supersu ( the uncheck button) and exit. then launch again supersu, it update the binary successfully, and reboot. after reboot, i launch and re-enable supersu ( check button) then try to cut/past to system ...unfortunately unsuccessful

ahhl said:
i use the above and it doesnt work. still no root eventhough it manage to install
i noticed during installation
it says
remounting system r/w
is this mean it fail to mount??
ok now this work.
before install supersu
go to mount menu and enable system mount
then only install supersu
--------------------
sorry to say i still cannot get full root. cannot go copy paste to system. it still read only. supersu not responding at all!!!?
Click to expand...
Click to collapse
Maybe Huawei security software is blocking it from running?
Did you wipe dalvik/cache?

RobboW said:
Maybe Huawei security software is blocking it from running?
Did you wipe dalvik/cache?
Click to expand...
Click to collapse
i did try to wipe dalvik/cache but it freeze. luckily i able to reboot successfully
---------- Post added at 10:24 AM ---------- Previous post was at 10:12 AM ----------
RobboW said:
Maybe Huawei security software is blocking it from running?
Did you wipe dalvik/cache?
Click to expand...
Click to collapse
ok i go to phone manager and allow supersu to autolunch
now supersu works.

I just used the unroot zip and it worked. This is good as I can root, make changes then unroot.
Edit:
It seems removing root has allowed my file manager to still do root operations, possibly as it was already allowed root access prior to uninstalling SU. Other user apps cannot access root. I just put the Huawei Notepad app back into system/priv-app from backups folder in Storage. Permissions were ok without altering. All I needed was a wipe dalvik/cache in TWRP and reboot.

Unfortunately I reflashed the Stock Recovery and now I'm not able to do anything. I've tried adding the dload folder with the B560 update to reinstall the firmware, but it fails at 5%, with both the OTA update and the Full versions. I'm soooo scared that I have bricked my device. When I reboot into the stock recovery I get 3 options, Reboot System, Wipe data/factory reset and Wipe cache partition. And when I manually force it into fastboot/rescue mode the computer doesn't recognize the phone.
Please someone tell me that my device can be saved somehow! I don't know what else to do :*(

Bonnie1977 said:
Unfortunately I reflashed the Stock Recovery and now I'm not able to do anything. I've tried adding the dload folder with the B560 update to reinstall the firmware, but it fails at 5%, with both the OTA update and the Full versions. I'm soooo scared that I have bricked my device. When I reboot into the stock recovery I get 3 options, Reboot System, Wipe data/factory reset and Wipe cache partition. And when I manually force it into fastboot/rescue mode the computer doesn't recognize the phone.
Please someone tell me that my device can be saved somehow! I don't know what else to do :*(
Click to expand...
Click to collapse
Which stock recovery did you use though? It must be the right one to work.
I found a flash fail at 5% was when there is no update in the /System/dload folder if you're trying to force it to do OTA. I did that by accident. Thought I bricked it but it re-booted ok.
If you use the dload folder in SD card, Marshmallow prefers to kick off the update from the dialler app.
If you used the wrong recovery, maybe it will flash from SD ok with a different ROM but we need to know exactly what recovery you flashed to it. That controls partitioning which you probably messed up.
See if you can re-install a driver and see it with ADB somehow.

RobboW said:
Which stock recovery did you use though? It must be the right one to work.
I found a flash fail at 5% was when there is no update in the /System/dload folder if you're trying to force it to do OTA. I did that by accident. Thought I bricked it but it re-booted ok.
If you use the dload folder in SD card, Marshmallow prefers to kick off the update from the dialler app.
If you used the wrong recovery, maybe it will flash from SD ok with a different ROM.
Click to expand...
Click to collapse
I used this one... So it should have worked properly. How can I flash it from the SD card? I'm willing to try anything right now. Because I'm about to go crazy!

Bonnie1977 said:
I used this one... So it should have worked properly. How can I flash it from the SD card? I'm willing to try anything right now. Because I'm about to go crazy!
Click to expand...
Click to collapse
this recovery works fine from me , i extracted it from B560 update.app.. hmm try and give B522 recovery a try then , put the update.app file in the dload folder and put it on your sd card root folder, then flash the stock recovery using recovery mate7 mobopx v2.1 http://depositfiles.com/files/dkok9h43y then use the 3 buttons trick to force install the firmware
edit : when updating with the full update , you only put the update.app file in the dload folder, nothing else

touns_j said:
this recovery works fine from me , i extracted it from B560 update.app.. hmm try and give B522 recovery a try then , put the update.app file in the dload folder and put it on your sd card root folder, then flash the stock recovery using recovery mate7 mobopx v2.1 http://depositfiles.com/files/dkok9h43y then use the 3 buttons trick to force install the firmware
edit : when updating with the full update , you only put the update.app file in the dload folder, nothing else
Click to expand...
Click to collapse
Yesssss!!! I finally got it fixed... I added the full B522 update to my sd and forced the update and it WORKED!!! The B560's wouldn't but that one did... I don't understand why seeing that I had B560 when I tried rooting my device. I'm just glad that I have my phone back!! :good::laugh:

Bonnie1977 said:
Yesssss!!! I finally got it fixed... I added the full B522 update to my sd and forced the update and it WORKED!!! The B560's wouldn't but that one did... I don't understand why seeing that I had B560 when I tried rooting my device. I'm just glad that I have my phone back!! :good::laugh:
Click to expand...
Click to collapse
i'm glad it worked (i should probably remove that recovery though , maybe the file got corrupted while i was uploading it who knows , but it works fine for me )

Back to Stuck

Hello guys
I unlocked the bootloader and root my phone but it's not full root because it's Read only and I can't uninstall any system apps and the only thing I get is to freeze those app and because of this I want to go back to stuck
But I couldn't do that no matter what:crying::crying:
I try Upade.app in dload folder on both internal and sd card but I get error when I want to initiate the update
So please if any one knows a cretin way to go back to stuck, do tell
does Sp Flash tool works with this phone or not ???

badboy_6120 said:
Hello guys
I unlocked the bootloader and root my phone but it's not full root because it's Read only and I can't uninstall any system apps and the only thing I get is to freeze those app and because of this I want to go back to stuck
But I couldn't do that no matter what:crying::crying:
I try Upade.app in dload folder on both internal and sd card but I get error when I want to initiate the update
So please if any one knows a cretin way to go back to stuck, do tell
does Sp Flash tool works with this phone or not ???
Click to expand...
Click to collapse
try to reroot using the method from this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
you need to flash your stock boot.img thru twrp to remove the superuser you use previously before proceed using superRoot or SuperSU from that thread. and try to look for your stock boot.img maybe you can find it in this thread https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Good Luck.

eddmecha said:
try to reroot using the method from this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
you need to flash your stock boot.img thru twrp to remove the superuser you use previously before proceed using superRoot or SuperSU from that thread. and try to look for your stock boot.img maybe you can find it in this thread https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Good Luck.
Click to expand...
Click to collapse
thanks for your reply
any Idea how to get back to stuck firmwork ???

badboy_6120 said:
thanks for your reply
any Idea how to get back to stuck firmwork ???
Click to expand...
Click to collapse
Flash back stock boot and you'll be back to stock, as long as you didn't modify any of the other partitions (/system, /vendor, /product). And flash back recovery using adb.
Get stock boot by downloading your firmware from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Then download Huawei Update Extractor https://forum.xda-developers.com/showthread.php?t=2433454
Open it up and open update.app which you extracted from update.zip. Right click on BOOT and extract, same with recovery.
Flash back boot using twrp and 'fastboot flash recovery recovery.img' to flash back stock boot.

ante0 said:
Flash back stock boot and you'll be back to stock, as long as you didn't modify any of the other partitions (/system, /vendor, /product). And flash back recovery using adb.
Get stock boot by downloading your firmware from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Then download Huawei Update Extractor https://forum.xda-developers.com/showthread.php?t=2433454
Open it up and open update.app which you extracted from update.zip. Right click on BOOT and extract, same with recovery.
Flash back boot using twrp and 'fastboot flash recovery recovery.img' to flash back stock boot.
Click to expand...
Click to collapse
I did that but I still don't see "system update" in settings and still getting error while applying new update and can not apply any theme and still have that ridiculous screen that apeared after unlocking bootloader
I mean any way like flashing a new firmware with a tool like SP Flash Tool

badboy_6120 said:
I did that but I still don't see "system update" in settings and still getting error while applying new update and can not apply any theme and still have that ridiculous screen that apeared after unlocking bootloader
I mean any way like flashing a new firmware with a tool like SP Flash Tool
Click to expand...
Click to collapse
You will have to flash back hw and public zips for your build. There's a folder (hw_init) in /data/ that gets wiped when you format data, it contain apps (system update for example) and the theme engine.
So you will have to flash back TWRP again and decrypt again if you went back to stock, else you won't be able to flash the zips. After that you can flash back stock boot and recovery, and you *should* be able to update via OTA.
Here's a little guide for getting HW and public for your build: https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
Also, question: What update are you trying to apply? It might just be that it's not approved by Huawei yet, and that makes it impossible to install using Firmware Finder.
And if you're trying the Dload method, it won't work. Only 2 offline firmwares have been released.
Edit: I should learn to read. So you're trying Dload? Yeah, that won't work.
I guess you could install your current full firmware using Firmware Finder, but for that you'd still need to flash back HW and Public so you can actually see the System Update button.
And that means flashing back TWRP, and flashing to /data requires decrypting, so you'd have to do that as well.

ante0 said:
You will have to flash back hw and public zips for your build. There's a folder (hw_init) in /data/ that gets wiped when you format data, it contain apps (system update for example) and the theme engine.
So you will have to flash back TWRP again and decrypt again if you went back to stock, else you won't be able to flash the zips. After that you can flash back stock boot and recovery, and you *should* be able to update via OTA.
Here's a little guide for getting HW and public for your build: https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
Also, question: What update are you trying to apply? It might just be that it's not approved by Huawei yet, and that makes it impossible to install using Firmware Finder.
And if you're trying the Dload method, it won't work. Only 2 offline firmwares have been released.
Edit: I should learn to read. So you're trying Dload? Yeah, that won't work.
I guess you could install your current full firmware using Firmware Finder, but for that you'd still need to flash back HW and Public so you can actually see the System Update button.
And that means flashing back TWRP, and flashing to /data requires decrypting, so you'd have to do that as well.
Click to expand...
Click to collapse
My Stuck rom is MHA-L29C185B110 and since I didn't find this one I extracted the boot.img from MHA-L29C185B126 and used it
I also download the public and Hw zip for MHA-L29C185B126 rom and flash those
When I boot up the camera Icon is gone as for Settings
but the update option is now avalible in settings and it suggest build 156 but when I hit quick update it gives me a popup that says Download failed
any Idea ???

badboy_6120 said:
My Stuck rom is MHA-L29C185B110 and since I didn't find this one I extracted the boot.img from MHA-L29C185B126 and used it
I also download the public and Hw zip for MHA-L29C185B126 rom and flash those
When I boot up the camera Icon is gone as for Settings
but the update option is now avalible in settings and it suggest build 156 but when I hit quick update it gives me a popup that says Download failed
any Idea ???
Click to expand...
Click to collapse
You have to flash public first than hw_data not the opposite.

gm007 said:
You have to flash public first than hw_data not the opposite.
Click to expand...
Click to collapse
I used this method that our friend suggest in post 2
UNLOCK YOUR BOOTLOADER
02-FLASH TWRP 3.0.2-2 (thanks to @Tkkg1994) using ADB
03-Boot into TWRP (HOLD VOL up + POWER)
03(a)-Backup your Boot thru TWRP into your ext SD or OTG(optional)
04-Format Data in TWRP
05-Flash superRoot.zip (thanks to @ante0 for this)
06-Flash Public_data.zip if you are on build L29C636 u can use THIS
07-Flash Full_HW_data.zip(you will get error 7 but it still went thru)if you are on build L29C636 u can use THIS
***how to obtain files for step 6&7 Read THIS thanks to @gm007
08-Boot into system (setup ur phone)
09-Install PHH superuser from playstore.

badboy_6120 said:
I used this method that our friend suggest in post 2
UNLOCK YOUR BOOTLOADER
02-FLASH TWRP 3.0.2-2 (thanks to @Tkkg1994) using ADB
03-Boot into TWRP (HOLD VOL up + POWER)
03(a)-Backup your Boot thru TWRP into your ext SD or OTG(optional)
04-Format Data in TWRP
05-Flash superRoot.zip (thanks to @ante0 for this)
06-Flash Public_data.zip if you are on build L29C636 u can use THIS
07-Flash Full_HW_data.zip(you will get error 7 but it still went thru)if you are on build L29C636 u can use THIS
***how to obtain files for step 6&7 Read THIS thanks to @gm007
08-Boot into system (setup ur phone)
09-Install PHH superuser from playstore.
Click to expand...
Click to collapse
Hi there,
I am having similar issues, but the THIS in your post is just text? I am a novice to the Mate 9 and am trying to get my system update back It failed when I tried to go to B136 via FF

Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.

gm007 said:
Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.
Click to expand...
Click to collapse
Thanks for that. Do I have to do a full wipe if coming from a MHA-L09C34B122?

gm007 said:
Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.
Click to expand...
Click to collapse
Thanks man, It really worked:good::good:
I'm running on Stuck Rom again :victory::victory:

[hisense a6] custom reupload - R 02 (HLTE700T-L1488.6.09.02.00)

I made hisense a6 custom rom with yklaxds 's qpst package.
I merge system.img and modified rawprogram
i install gapps manually.
set security label and permission.
most function work very well.
ota update impossible. because of hisense's update is bonding partition
qualcomm package open now.
R02 HLTE700T-L1488.6.09.02.00.joygram
https://drive.google.com/file/d/1mgpOIClF0fgIkPc5rMth6VtNa0mJKG9z/view?usp=drivesdk
link may be block because heavy traffic by onedrive.
backup and share please.
R01 HLTE700T_L1488.6.04.01.00.joygram
https://1drv.ms/u/s!As0qoPp2K9MuaQeKFk-6PrnqfZ4
(onedrive blocked because heavy traffic, backup and share, please)
flashing method
https://1drv.ms/b/s!As0qoPp2K9MuaHBVpNnNPGkKl2M
nitice:
please use
rawprogram_30060000_joygram.xml only.
notice:
if appear password screen after flashing.
enter recover mode and factory reset
recovery mode :
power off : power button about 20 seconds over
volume_down + power : about 5 seconds and remove your fingers^^
notice:
WIP custom with L1488.6.09.02.00
if you brick, use TF recovery ROM
Link: https://pan.baidu.com/s/1Mkjvb9q_0oGuXZ0KLprJog extraction
code: j8qi
you can recover.
this instruction from official hisense forumn
2) Preparation before the T card upgrade:
1. Prepare a TF card and format the TF card into FAT format first;
2. Decompress the downloaded product software version (generally a compressed package and divide it into multiple compressed sub-packets) and copy the obtained folder named "HLTE700T_TF" to the root directory of the TF card.
3. Insert the TF card into your phone and put the battery in your phone. Make sure the battery is more than 50% charged. If the battery is low, please charge it first.
(three) T card upgrade process
1. Press and hold the “Volume+” and “Volume-” side buttons at the same time, then press the power button, the phone will automatically enter the T card upgrade mode for upgrade. If the phone does not enter the T card upgrade mode, please shut down. Repeat this operation.
2. Wait for about 5 minutes to complete the upgrade and a prompt for the upgrade to be successful.
3. Restart according to the prompt after successful upgrade. If there is no such prompt, press and hold the power button for more than 20 seconds to restart. After the upgrade, the first boot time is longer, which is several times of the normal boot time. Please be patient.
**
I am not chinese but korean

Thanks very much,
root the phone did you have method?

Maybe you can share your ways that how do you make it to let more people to discuss it. Thanks.
I will upload latest version QPST ROM, also from taobao.com. Please wait for me.
------------------------------------------------------------------------------------------------------------------
2019 5.16 version L1488.6.09.02.00 official ROM QPST:
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view?usp=sharing

sdwshlsdx said:
Thanks very much,
root the phone did you have method?
Click to expand...
Click to collapse
Just add su file or root app like SuperSU? I dont know. Maybe have a try. You can just extract my ROM file(system.img files).

yklaxds said:
Maybe you can share your ways that how do you make it to let more people to discuss it. Thanks.
I will upload latest version QPST ROM, also from taobao.com. Please wait for me.
------------------------------------------------------------------------------------------------------------------
2019 5.16 version L1488.6.09.02.00 official ROM QPST:
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view?usp=sharing
Click to expand...
Click to collapse
I will research more.
Thank you.

I flashed it according to your method. But now it's asking for password. How to proceed?

danjl said:
I flashed it according to your method. But now it's asking for password. How to proceed?
Click to expand...
Click to collapse
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience

pengboby126 said:
Thanks a lot for this rom?
Is it possible to enable camera 2 api by modifying build.prop, which functions Gcam Port?
Click to expand...
Click to collapse
i tried but no gapps cam working.
if you know gcam for hisense a6
let me know.

joygram said:
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience
Click to expand...
Click to collapse
How can I reset phone? It's not detected through usb anymore

danjl said:
How can I reset phone? It's not detected through usb anymore
Click to expand...
Click to collapse
dont worry.
you can recover with hisense TF Rom from fans.hisense.com ( hisense forum)
download tf rom and flashing.
I have files but can release next weekend.

sdwshlsdx said:
Thanks very much,
root the phone did you have method?
Click to expand...
Click to collapse
i am researching method with recovery.

joygram said:
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience
Click to expand...
Click to collapse
joygram said:
dont worry.
you can recover with hisense TF Rom from fans.hisense.com ( hisense forum)
download tf rom and flashing.
I have files but can release next weekend.
Click to expand...
Click to collapse
EDIT: Yipee! It was asking for password. I booted to recovery by Hodling volume down+power. Then select an option to erase data, confirm by pressing volume up. It took a few minutes.
Then it booted with the custom rom!
So, anyone who comes across password can just erase their phone by booting into recovery.
Thanks to joygram! This works, so looking forward to having gapps on my phone now! Good luck to everybody.

danjl said:
How can I reset phone? It's not detected through usb anymore
Click to expand...
Click to collapse
Please try my hisense official flashing ROM.
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
joygram said:
i am researching method with recovery.
Click to expand...
Click to collapse
Yep, we need twrp so that we can root or flasing GAPPS.

danjl said:
EDIT: Yipee! It was asking for password. I booted to recovery by Hodling volume down+power. Then select an option to erase data, confirm by pressing volume up. It took a few minutes.
Then it booted with the custom rom!
So, anyone who comes across password can just erase their phone by booting into recovery.
Thanks to joygram! This works, so looking forward to having gapps on my phone now! Good luck to everybody.
Click to expand...
Click to collapse
enjoy !!

So to summarize... If we get chinese version of A6 we can now flash this custom rom to have both :
- gapp (not available on chinese version)
- Widgets and full eink function (not available on russian version)
?

Yep, we need twrp so that we can root or flasing GAPPS.[/QUOTE]
->
I can not make twrp
I just merge system.img and install gapps manually.
so I can not root
but I will try

I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.

danjl said:
I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.
Click to expand...
Click to collapse
How do you change it? I also want root. Just like this way?
https://juejin.im/post/5b1bb43b5188257d5903045b
I want to make twrp but I don't know how to do it. Here no ways to teache me.
And can we unlock bootloader by ROM?

danjl said:
I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.
Click to expand...
Click to collapse
could you please boot.img release?

joygram said:
could you please boot.img release?
Click to expand...
Click to collapse
I'll upload it soon. Having some troubles with internet connection.
Thanks for the roms you uploaded.