I have recently bought a used LG G3 D850 AT&T model. The problem is that I'm only getting GPRS or 2g network instead of 3G. I have changed the "Preferred Network mode" to GSM/WCDMA/LTE auto mode but still to no avail. The phone is unrooted atm. I'd be grateful if anybody can help me!
I also have att d850.3g works great.make sure you are in 3g coverage. Because 3g in Pakistan is awful.and if c you are in 3g converge ,walk around your area to check again while using 2g.it will automatically switch to 3g.
Btw which Network are you using?
I have lg g3 850 at&t and I am having the same problem 3g and 4g not working i tried on warid zong and ufone sim but didt work out
andriod 5.0 is running on my phone.Is it possible to upgrade it to adnroid 6.0 marsmallow
please do reply
thanks
First u have to make sure its not converted.
Currently there are sprint g3's converted to atnt are sold in the market
If its original D850, U need to write the qcn from a working phone.
If u r in karachi I can help u.
krayzie6195 said:
I have lg g3 850 at&t and I am having the same problem 3g and 4g not working i tried on warid zong and ufone sim but didt work out
andriod 5.0 is running on my phone.Is it possible to upgrade it to adnroid 6.0 marsmallow
please do reply
thanks
Click to expand...
Click to collapse
You can't upgrade it to stock marshmallow.as firmware OTA requires AT&T sim card to upgrade.
You can have coustom marshmallow.first root your phone and then flash any Rom for d850.
Jahanzaibawan said:
You can't upgrade it to stock marshmallow.as firmware OTA requires AT&T sim card to upgrade.
You can have coustom marshmallow.first root your phone and then flash any Rom for d850.
Click to expand...
Click to collapse
Thanks for reply
At&t sim is only possible if some one is coming form USA and he brings the Sim
is there any alternative other than ?? or is it possible to get the At&t sim from here Lahore? and how many chances of 3g and 4g working if i upgrade to 6.0
krayzie6195 said:
Thanks for reply
At&t sim is only possible if some one is coming form USA and he brings the Sim
is there any alternative other than ?? or is it possible to get the At&t sim from here Lahore? and how many chances of 3g and 4g working if i upgrade to 6.0
Click to expand...
Click to collapse
If someone brings AT&T sim for you.It would not solve your problem.As there is no service of AT&T in Pakistan. You can use Custom Rom like Fulmics till someone releases flashable Stock Marshmallow.
And yes,3g and 4g works on marshmallow.
My 3g is working on at&t g3 clody rom 2.5. Go to setting/Tethering&Networks/mobilenetworks/acesspointnames. And set up a new apn. Every SIM has it's own apn.
Jahanzaibawan said:
If someone brings AT&T sim for you.It would not solve your problem.As there is no service of AT&T in Pakistan. You can use Custom Rom like Fulmics till someone releases flashable Stock Marshmallow.
And yes,3g and 4g works on marshmallow.
Click to expand...
Click to collapse
I'm on fulmics 5.3 on D850
3g works great on zong but 4g does not
I'm in good 4g coverage area as my lg g2 f320k works fine with 4g
Can you help?
Sent from my LG-D850 using Tapatalk
Try with warid. I had my 4g working with warid.
Jahanzaibawan said:
Try with warid. I had my 4g working with warid.
Click to expand...
Click to collapse
Which rom?
Stock or custom?
I'm on fulmics 5.3 d850
Do you have d850?
Sent from my LG-D850 using Tapatalk
awais52 said:
Which rom?
Stock or custom?
I'm on fulmics 5.3 d850
Do you have d850?
Sent from my LG-D850 using Tapatalk
Click to expand...
Click to collapse
yup. I have d850 running fulmics.
But i checked it on stock kit kat.4g worked well on stock. yet i haven't checked on fulmics.
instructor2 said:
First u have to make sure its not converted.
Currently there are sprint g3's converted to atnt are sold in the market
If its original D850, U need to write the qcn from a working phone.
If u r in karachi I can help u.
Click to expand...
Click to collapse
Well a few days back i got a used LG G3 AT&T showing software version D85010n in settings . It was already rooted (checked from root checker) with Kitkat 4.4.2. But when i rebooted it yesterday in recovery mode, it showed LS990ZV6 under Android System Recovery.
That means i got a converted G3....... Is there a way to install any custom rom in it? If so, which rom should i choose, D850 or Ls990? or should i avoid installing any custom rom in it?
I installed CM 13 rom in my LG G3 850 (020F) (from stock lollipop to Fulmics 6.1 and then to CM due to no data connection in Fulmics).. all is fine but the data connection only keeps to 'E', it never goes to H or 3G. .. the settings are right (APN set right for service provider, preferred network set to 3G) .. what could be the reason ? do i need to change the modem of 3G as wel ?
xavier9 said:
Well a few days back i got a used LG G3 AT&T showing software version D85010n in settings . It was already rooted (checked from root checker) with Kitkat 4.4.2. But when i rebooted it yesterday in recovery mode, it showed LS990ZV6 under Android System Recovery.
That means i got a converted G3....... Is there a way to install any custom rom in it? If so, which rom should i choose, D850 or Ls990? or should i avoid installing any custom rom in it?
Click to expand...
Click to collapse
if u got ls990, cloudyg3 is the best rom i tried so far
1) first u need to root ( no need to if its already rooted).
2) then flash twrp via flashify or autorec.
3) download cloudyg3 (u can search for it here on xda)
4) wipe system, cache, dalvik, data partitions.
5) install cloudyg3 (make sure u check ls990 in aroma installer otherwise u will stuck in a bootloop)
thats it, all your problems will be solved, data will be working fine with H+
signals are good as i have tested on many ls990s.
i m using CM13.1 (android 6.0.1) on my LG 850 .. So far its doing good ... it shows E logo when data is enabled but the internet speed is good and reasonable ... so, i consider this E as 3G here in Pak.
The performance of this ROM is good / speedy and battery is reasonably well.
I hav lg g3 850 and my cell fon not shifting on 2g network if 3g network not availing and remains offlin to network iam using jazz and updated to 6.0
Any one tel me slution
Jahanzaibawan said:
I also have att d850.3g works great.make sure you are in 3g coverage. Because 3g in Pakistan is awful.and if c you are in 3g converge ,walk around your area to check again while using 2g.it will automatically switch to 3g.
Btw which Network are you using?
Click to expand...
Click to collapse
How did you convert your D850 to 3G because I don't have option to change preferred network it's working only 2G please help. Its AT&T phone and I'm using zong.
I'm currently on 5.0.1 unrooted in Lahore and I don't have that network mode option in the setting so I'm stuck with 2G. Can anyone help please?
Mianmoeez said:
How did you convert your D850 to 3G because I don't have option to change preferred network it's working only 2G please help. Its AT&T phone and I'm using zong.
Click to expand...
Click to collapse
It automatically converts to 3g where 3g coverage is available. Btw you should try fulmics ROM. It's the best out there.
Related
my brother gave me new inspire 4g..... after that i made some changes in phone first i root that phone to install custom room android HD.... its work fine but 3 g network is not working in my phone only E network showing plase help me to solve this problem.... now this phonei am using in india
do you enter the correct APN's for your carrier? did you flash a better radio?
victor_2511 said:
my brother gave me new inspire 4g..... after that i made some changes in phone first i root that phone to install custom room android HD.... its work fine but 3 g network is not working in my phone only E network showing plase help me to solve this problem.... now this phonei am using in india
Click to expand...
Click to collapse
Inspire 4G works on the baseband 1900 but In India the baseband is 2100 so there is no way to make 3G work on it .
lovemoddingmyphone said:
Inspire 4G works on the baseband 1900 but In India the baseband is 2100 so there is no way to make 3G work on it .
Click to expand...
Click to collapse
What about HTC Explorer.... same problem here
Hi, I bought an ATT Unlocked D800 LG G2. I am using it on the MetroPCS network and all features work. I have 4G LTE working well. I dont want the ATT Firmware on it. Is there a way I can install the MetroPCS Firmware on it? or Tmobile Firmware? I want to do this so I ca get the WiFi calling feature and other MetroPCS apps that are not on the ATT Firmware.
I have the LG flash tool installed but when I try to flash my G2 D800 with the Tmobile D801 Firmware it gives me an error. Ive been reading everywhere but cant find an answer. Any help would be appreciated.
Thanks G..
warduke said:
Hi, I bought an ATT Unlocked D800 LG G2. I am using it on the MetroPCS network and all features work. I have 4G LTE working well. I dont want the ATT Firmware on it. Is there a way I can install the MetroPCS Firmware on it? or Tmobile Firmware? I want to do this so I ca get the WiFi calling feature and other MetroPCS apps that are not on the ATT Firmware.
I have the LG flash tool installed but when I try to flash my G2 D800 with the Tmobile D801 Firmware it gives me an error. Ive been reading everywhere but cant find an answer. Any help would be appreciated.
Thanks G..
Click to expand...
Click to collapse
I have the same issue as you and gave gotten no answer from anyone. I think we both will have to wait for a flashable zip. This was also posted in the wrong forum. Should be unfer Q/A.
theinspector said:
I have the same issue as you and gave gotten no answer from anyone. I think we both will have to wait for a flashable zip. This was also posted in the wrong forum. Should be unfer Q/A.
Click to expand...
Click to collapse
HTML:
Hi gyes .I suggest you go on this specific pagehttp://forum.xda-developers.com/showthread.php?t=2432476 and read very well everything there !you have to download the firmware you need i suggest you flash 80110g jelybean for easy rooting then but put insde the lg flash tool d801 dll file and then sould work .Also you need the mega dll to flash in windows .!Read there .Now if your g2 doesnt support the specific firmware of d801 you have to be prepaired before and downloaded already your specific phones firmware so you can flash via download mode yours specific firmware again .to make it work .I think you are not having issues with the d801 firmware but i can not be sure .!An other way is to root as you are now put a recovery (flash ) and make a back up of your current firmware 1st so you can go back safely if something wrong accures.I believe that your touch screen shall work with d801 firmware touch so you are not having issues but an alternative way is to reach the imei and find what is your phones manufacturer firmware .Also if its refurbished you can never be sure and you have to open the back case to find out 100%Hope i helped you .:good:
---------- Post added at 10:18 AM ---------- Previous post was at 09:41 AM ----------
warduke said:
Hi, I bought an ATT Unlocked D800 LG G2. I am using it on the MetroPCS network and all features work. I have 4G LTE working well. I dont want the ATT Firmware on it. Is there a way I can install the MetroPCS Firmware on it? or Tmobile Firmware? I want to do this so I ca get the WiFi calling feature and other MetroPCS apps that are not on the ATT Firmware.
I have the LG flash tool installed but when I try to flash my G2 D800 with the Tmobile D801 Firmware it gives me an error. Ive been reading everywhere but cant find an answer. Any help would be appreciated.
Thanks G..
Click to expand...
Click to collapse
Also i have to warn you that if your cell is d800 motherboard for sure you have to flash the d800 att firmware with d800 dll inside the flash tool folder ,,also you will need a d800 custom recovery after rooting !!Dont flash the wrong recovery or you will brick temporary !! If you flash the d801 firm you will also have sound issues (different hardware microphones on d 800 )!Afterwards you already flashed the att firm root & recovery steps you maybe can flash a d801 rom but with d800 kernel before reboot :good:
[ROM] T-Mobile 4.4.2 Stock D80120e (Wi-Fi Calling)
I have modified the stock T-Mobile D80120e ROM to work on our AT&T LG G2.
This will allow your AT&T LG G2, D800, to function just like a T-Mobile LG G2, D801, giving you the ability to use T-Mobile WI-FI Calling.
Click to expand...
Click to collapse
Its in the AT&T forum
Thanks Will this work on MetroPCS network? Im on MetroPCS and am hoping wifi hotspot that I pay extra for and wifi calling will work as well.
So I have this lg g2 d800 at&t version using cloudy g2.2 . I had this 3g problem that my phone could only use 2g and would never connect to 3g network. Then i went to this Mobile mall and the person did some QCN stuff in my phone . Now iam able to use 3g BUT the 3g sometimes work and sometimes doesnt work (sometimes there are 2 arrows below H and 3g works BUT sometimes there is 1 arrow below H and 3g doesnt work). Any help please ???
razerpkdeadly said:
So I have this lg g2 d800 at&t version using cloudy g2.2 . I had this 3g problem that my phone could only use 2g and would never connect to 3g network. Then i went to this Mobile mall and the person did some QCN stuff in my phone . Now iam able to use 3g BUT the 3g sometimes work and sometimes doesnt work (sometimes there are 2 arrows below H and 3g works BUT sometimes there is 1 arrow below H and 3g doesnt work). Any help please ???
Click to expand...
Click to collapse
What QCN Stuffs?
My 801 on Cloudy is also having similar problems that it is not connecting 3G. 2G is working fine.
I thinky a clean reflash can solve this issue
Sent from my LG-D801 using Tapatalk
zank19 said:
What QCN Stuffs?
My 801 on Cloudy is also having similar problems that it is not connecting 3G. 2G is working fine.
I thinky a clean reflash can solve this issue
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I didnt tell you the whole story bro, actually this phone was sold to me as d802 . In settings->about , it was written it was an d802 but when i updated it to lollipop , there were touch problems in the phone. Then a guy named aftab (xda member) told me that your phone is refurbished and is actually a d800 (you can check your phone version by opening the back cover). Bottom line is this
1) check whether your phone is not refurbished i.e the version written at the back cover is the same as in settings->about
2) I dont know this QCN stuff that's why iam here !!!
razerpkdeadly said:
I didnt tell you the whole story bro, actually this phone was sold to me as d802 . In settings->about , it was written it was an d802 but when i updated it to lollipop , there were touch problems in the phone. Then a guy named aftab (xda member) told me that your phone is refurbished and is actually a d800 (you can check your phone version by opening the back cover). Bottom line is this
1) check whether your phone is not refurbished i.e the version written at the back cover is the same as in settings->about
2) I dont know this QCN stuff that's why iam here !!!
Click to expand...
Click to collapse
Ohh ok. Refurbs have issues. You are lucky that it did not brick.
Mine is a T-mobile 801. My issue is something else. 3G was working very well previously. I just kept on dirty flashing new versions of the ROM as well as changing kernels as well, and now the 3G is not detecting at all.
Even if I do a network search, only the RAT: GSM comes and not the CDMA.
I think I somehow messed with the baseband. I can't clean flash again, as it has a lot of data. And I m very lazy in doing backups as well ☺
That is why was looking if someone can help me with the correct baseband that I can reflash without reinstalling the ROM to fix this 3G issue.
Sent from my LG-D801 using Tapatalk
For the Love of Gawd....someone help me on this issue
Hello .
I got a jio sim 10 days ago but i was getting no service in my moto g3 and then i put that sim in samsung phone, it got activated and i was able to place calls on Samsung device but then i put it back in moto g3 and again its showing no service.
I thought the sim was faulty but today i got the new sim card from jio and it was again showing No service so i put it again in Samsung phone and was able to place calls. The problem is the jio sim isn't showing any service in my phone only.
I have tried flashing Reseruction remix 6.0.1, stock lolipop rom and also cm12 but i am not getting any service at all.
Please help me.
aaqib67 said:
Hello .
I got a jio sim 10 days ago but i was getting no service in my moto g3 and then i put that sim in samsung phone, it got activated and i was able to place calls on Samsung device but then i put it back in moto g3 and again its showing no service.
I thought the sim was faulty but today i got the new sim card from jio and it was again showing No service so i put it again in Samsung phone and was able to place calls. The problem is the jio sim isn't showing any service in my phone only.
I have tried flashing Reseruction remix 6.0.1, stock lolipop rom and also cm12 but i am not getting any service at all.
Please help me.
Click to expand...
Click to collapse
Bro make sure the barcode u used to collect to sim is must be generated from the phn ij which u r going to use the jio sim..or u hav to registered via ur imei for working jio sim....
I felt same problem...cos i tookba codr from one of my frnds but i got no signal like u...but then i use old jio apk and genrated code successfully from my g3 using stock imei...(previously i tried the imei from which the barcode generated but not works)....then got a new sim by biometric id thru adhar card number.....activated within 5 mins and got all msgs quickly.....
reeeju said:
Bro make sure the barcode u used to collect to sim is must be generated from the phn ij which u r going to use the jio sim..or u hav to registered via ur imei for working jio sim....
I felt same problem...cos i tookba codr from one of my frnds but i got no signal like u...but then i use old jio apk and genrated code successfully from my g3 using stock imei...(previously i tried the imei from which the barcode generated but not works)....then got a new sim by biometric id thru adhar card number.....activated within 5 mins and got all msgs quickly.....
Click to expand...
Click to collapse
bro they didnt ask for any bar code , they just asked for my imei number and the sims are working in all other handsets except Moto G3. Actually my model number is XT1541 (UK 1gb edition) . I guess its 4g band doesnt work in india. I flashed stock MM too but still i am not getting any signal
hi , i also want to share my experience..
i got motoG3, i ported my sim to JIO
now i put the sim in Slot1 , i dont know why that didnt work.. ( i didnt get signal like you )
but when i changed it to Slot2 it started working...
maybe the reason is : i ported my sim which is in 2nd slot.. any kind of IMEI thing is stopping me to use that JIO sim in Slot1
hope this gives u some idea
aaqib67 said:
bro they didnt ask for any bar code , they just asked for my imei number and the sims are working in all other handsets except Moto G3. Actually my model number is XT1541 (UK 1gb edition) . I guess its 4g band doesnt work in india. I flashed stock MM too but still i am not getting any signal
Click to expand...
Click to collapse
Jio 4g bands are Band 3 (1800Mhz), Band 5 (850Mhz), Band 40 (2300Mhz).....but according to gsm arena i just saw ur lte bands are not matching to jio's ones....so i think in xt1541 u will get no signal
nandakis4 said:
hi , i also want to share my experience..
i got motoG3, i ported my sim to JIO
now i put the sim in Slot1 , i dont know why that didnt work.. ( i didnt get signal like you )
but when i changed it to Slot2 it started working...
maybe the reason is : i ported my sim which is in 2nd slot.. any kind of IMEI thing is stopping me to use that JIO sim in Slot1
hope this gives u some idea
Click to expand...
Click to collapse
Actually my phone is single sim and i just came to know that my modek doesnt support jio LTE band , So i might probably sell this phone.
Thanks anyways !!
reeeju said:
Jio 4g bands are Band 3 (1800Mhz), Band 5 (850Mhz), Band 40 (2300Mhz).....but according to gsm arena i just saw ur lte bands are not matching to jio's ones....so i think in xt1541 u will get no signal
Click to expand...
Click to collapse
yes bro, i also checked that and sadly i cannot use 4g here is india.
Thanks anyways for ur response
aaqib67 said:
yes bro, i also checked that and sadly i cannot use 4g here is india.
Thanks anyways for ur response
Click to expand...
Click to collapse
Hmmm....so which phn will u going to buy?...cos i also wanna buy a phn budget 16k....
Now I have using marshmallow stock rom in my moto g 2015(moto g3).Now i wanna downgrade my phone to lollipop..because marshmallow update drain more battery.....so want some help guys....
I have downloaded the STOCK_5.1.1_optimized_MOTOG3_Ver1.0 and Moto G3 5.1.1 Modem Firmware posted by aman singh 63 on XDA developers.....
Now I have a doubt in flashing the rom and firmware...please help me.....thank you
harikrishnanharry139 said:
Now I have using marshmallow stock rom in my moto g 2015(moto g3).Now i wanna downgrade my phone to lollipop..because marshmallow update drain more battery.....so want some help guys....
I have downloaded the STOCK_5.1.1_optimized_MOTOG3_Ver1.0 and Moto G3 5.1.1 Modem Firmware posted by aman singh 63 on XDA developers.....
Now I have a doubt in flashing the rom and firmware...please help me.....thank you
Click to expand...
Click to collapse
1. This is the wrong thread to post this.
2. The file you downloaded is stocks-modified, to restore stock, use firmware flashing guide by lost101 in general section.
3. All the information is properly documented there, make sure to search and read the posts before doing anything. Likely any query that you may have is already answered, if not, you an ask in that thread.
Broadcasted from Zeta Reticuli
In my mob Jio doesn't work at home but when I go around city it works fine. Model is xt1550.
Strangely it works good at home on my brother's Samsung mobile.
I guess it's frequency problem, may be.
I thought moto mobile's signal reception would be good but unfortunately I got deeply disappointed.
Hello my friends ...
I'm new here .. i live in algeria .. i have an LG G3 d850 AT&T version, and i'm on andoid 4.4.2 .. when i go to software update it tells me that there is no update available
so how can i update my software .. if i can't how can i install custom rom like fulmics.
2nd problem the phone read only 2g and i'm using 3g sim .. but show me "E" it means 2g
please help me
RiadhMilanello said:
Hello my friends ...
I'm new here .. i live in algeria .. i have an LG G3 d850 AT&T version, and i'm on andoid 4.4.2 .. when i go to software update it tells me that there is no update available
so how can i update my software .. if i can't how can i install custom rom like fulmics.
2nd problem the phone read only 2g and i'm using 3g sim .. but show me "E" it means 2g
please help me
Click to expand...
Click to collapse
You can only ota update that model with An AT&T sim or AT&T prepaid or like sim. Also are you sure that phone supports the 3G bands for your country?
Sent from my iPhone using Tapatalk
hyelton said:
You can only ota update that model with An AT&T sim or AT&T prepaid or like sim. Also are you sure that phone supports the 3G bands for your country?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yeah i'm sure ... my friend have an LG G3 T-mobile version and 3g works just fine
i think the problem is only in the AT&T version
RiadhMilanello said:
Yeah i'm sure ... my friend have an LG G3 T-mobile version and 3g works just fine
i think the problem is only in the AT&T version
Click to expand...
Click to collapse
The T-Mobile version and AT&T version are different.. they each have different bands
Sent from my iPhone using Tapatalk