Hello friend i m new user, i have problem witch guophone G9500L
Quad core 6589
WVGA 854x480
Rom 4GB
Ram 1GB
problem is when i use oficial rom witch site needrom
now i have big problem phone work but lcd is white and have green line, nothing see.
How can i return to good condition phone ? I try to load many frimeware, and always show white lcd and line. LCD is good before flash all is good.
I think problem is driver lcd, can you hellp me ?
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
So, can t use other rom, except chage botloader ??
I try to load many frimeware but always have white lcd?
Cant load similar frimeware ?
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Darth said:
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Click to expand...
Click to collapse
i try to load rom via needrom with different firmware, and never brick phone, marked by botloader and upgrade frimeware, phone powers on but there are different forms of the white screen, on the other is completely white and the other with black and green line, can be heard as the phone starts up, running, but no image.
Can you send me link to custom rom ? witch i can try load.
I already said, I can't find anything relevant on XDA for your device. And I gave you a link to post in for help.
XDA Assist is here to help navigate the site, not for support..... And I have pointed you to where to ask for help.
Thanks for understanding, thread closed.
I installed Ozcan Rom for My galaxy S4 GT I9500... It works perfectly...but only problem i m facing is i cannot go into lock screen settings.....whenever i click lock screen option in settings...settings forecloses...And another thing is the lights of soft keys do not lit up...
Please find me a way out of it
Hi,
You will need to register on XDA and ask about your issue in the thread you downloaded the rom from. They are the experts there.
Or try reading the last several pages of the rom thread to see if anyone else is discussing this problem.
Good luck!
I am Using a Micromax Unite 2 (A106) And while using mobile uncle, my custom recovery was removed and i was left without one. After this, i used an app called flashgordon, which i found to flash a fix patch. When i flashed and rebooted, my phone shut down and rebboted, but has been stuck at the bootanimation for half an hour now.
I do not have a recovery to flash another rom either. I have tried lots of things but none of them seem to work and i cantg take it to micromax shop because there is not one in mt city. Can one of you please help because right now in this condition, my phone is just a rock with flashing lights. :crying::crying:
Hi, thank you for using XDA Assist. Unfortunately there is not a dedicated forum for your device on XDA. However, there is a thread with lots of good information here, http://forum.xda-developers.com/showthread.php?t=2792954 Perhaps someone there can help as they're experts on your device.
I update my phone software to lollipop everything was successful but after the phone get updated my touch screen was not functioning properly.
whenever I try to touch the screen, phone detect multiple touches at a inch away.
I reinstalled the default ROM (D80220B) by downloading from internet but problem is still there.
Can any one help me ?
taqikazmi said:
I update my phone software to lollipop everything was successful but after the phone get updated my touch screen was not functioning properly.
whenever I try to touch the screen, phone detect multiple touches at a inch away.
I reinstalled the default ROM (D80220B) by downloading from internet but problem is still there.
Can any one help me ?
Click to expand...
Click to collapse
Hi,
Thanks for using XDA assist.
Please read this http://forum.xda-developers.com/showthread.php?t=2478927 thread to get the info. For further queries , you could try to post them here http://forum.xda-developers.com/lg-g2/help for better help & support
Good luck
Thread closed, thank you
Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
XDA Visitor said:
Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like a hardware fail to me. Water damage does not have to be visible (scorching happens way more often if there was salt in the water). You will need warranty work at this point.
If you need a second opinion, you can try this thread (once you have registered for an XDA account):
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q&A] Gionee elife e3 development - root, cwm , roms , nadroid backup explained in
Hope this helps, and good luck!