Team Win Recovery Project 3.0.2-0
This is for the International Exynos SM-N900XX model only! Do not flash on Qualcomm models!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxynote3internationalexynos.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR OBTAINING ROOT
Extract Odin_3.10.7.zip to your computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for ha3g.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot without touching any other options, then press [Start].
Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
CHANGES
v3.0.2-0 - Initial build on twrp.me
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/TeamWin/android_device_samsung_ha3g (android-6.0)
Kernel: https://github.com/jcadduono/android_kernel_samsung_ha3g (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
XDA:DevDB Information
Team Win Recovery Project - Samsung Galaxy Note 3 (Exynos), Tool/Utility for the Samsung Galaxy Note 3
Contributors
jcadduono, Team Win & friends
Source Code: https://github.com/jcadduono/android_device_samsung_ha3g
Version Information
Status: Beta
Current Stable Version: 3.0.2-0
Stable Release Date: 2016-07-01
Created 2016-06-27
Last Updated 2016-07-01
Thank u very much for new twrp for our n900 device. Its the best recovery from all others & full compatible. You save my life. Thank you for great work .
jcadduono can you make kernel 6.0 for n900. Tks
Sent from my SM-N920K using Tapatalk
@jcadduono thank you. very good working.
Zip download:
http://turbobit.net/e20dbqyg7l12.html
chienduongvan said:
jcadduono can you make kernel 6.0 for n900. Tks
Sent from my SM-N920K using Tapatalk
Click to expand...
Click to collapse
sorry no interest in kernel dev on a device i don't own
thanks
bellal11 said:
thanks
Click to expand...
Click to collapse
Can you uploaf to MEGA?THANKS!!
rakee said:
Can you uploaf to MEGA?THANKS!!
Click to expand...
Click to collapse
seriously? it's 6 MB and direct download, what's the issue?
jcadduono said:
seriously? it's 6 MB and direct download, what's the issue?
Click to expand...
Click to collapse
I cant download it
rakee said:
I cant download it
Click to expand...
Click to collapse
rakee said:
Can you uploaf to MEGA?THANKS!!
Click to expand...
Click to collapse
https://mega.nz/#!1ttwgBYC!Hv-oU87LktSOPrxOsnceo31gRJfBNlpsjytoFsOSWog
mega link mate :good:
PaYDaY said:
https://mega.nz/#!1ttwgBYC!Hv-oU87LktSOPrxOsnceo31gRJfBNlpsjytoFsOSWog
mega link mate :good:
Click to expand...
Click to collapse
Thanks,mate:angel:
rakee said:
Thanks,mate:angel:
Click to expand...
Click to collapse
you are most welcome
Using this screen flicker, why??
Hello @jcadduono,
I am in Stock Lolippop and flashed this recovery without succeed.
Could you please help !
Now, I couldn't start my phone.
Thanks,
Thinh
lyduythinh said:
Hello @jcadduono,
I am in Stock Lolippop and flashed this recovery without succeed.
Could you please help !
Now, I couldn't start my phone.
Thanks,
Thinh
Click to expand...
Click to collapse
Are you flashing it on the correct device? Do you have ha3g? Following the instructions in the thread?
New official build is up on twrp.me now (3.0.2-0), it is 6.5 MB, if you have any other size then it's the wrong one!
@jcadduono Perfect. I downloaded another size of "twrp-3.0.2-0-ha3g.img.tar" (8.5MB).
I downloaded it in here.
Thank you very much. I got TWRP.
Thinh
@jcadduono I downloaded the .tar file but the format of file is .tar.md5 is it correct? ? I wanted to flash it whit Odin
آرین said:
@jcadduono I downloaded the .tar file but the format of file is .tar.md5 is it correct? ? I wanted to flash it whit Odin
Click to expand...
Click to collapse
twrp-3.0.2-0-ha3g.img.tar 6.5M This file guy.
BR,
Thinh
This is not the official file from twrp website? I downloaded one from the official, flash it, can not boot. Is it the different file? Thanks
xcal_tau said:
This is not the official file from twrp website? I downloaded one from the official, flash it, can not boot. Is it the different file? Thanks
Click to expand...
Click to collapse
They should be the same, only build fingerprint differs, both are 6.5 MB as of yesterday.
(official one was broken 2 days ago)
RYAN SHAY said:
@jcadduono I downloaded the .tar file but the format of file is .tar.md5 is it correct? ? I wanted to flash it whit Odin
Click to expand...
Click to collapse
tar is the same as tar.md5 for Odin. md5 just means it has a hash attached to the tar so Odin can make sure it's not corrupt (safer to flash than tar)
Related
url=http://postimage.org/]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url]
photo hosting sites
Hello World. This is official version of TWRP recovery for SM-G355HN
http://teamw.in/devices/samsunggalaxycore2.html
And tested for SM-G355H TWRP 3.0.0-0 :
http://forum.xda-developers.com/showpost.php?p=65784717&postcount=130
disclaimer:
I/XDA/higher power/is not responsible for any kind of damage to your device,
or in case it explodes, nuclear war etc.
Please use it at your own risk! Whatever you do with your phone it's your own choice!
Click to expand...
Click to collapse
Requirement :
1. PC/Laptop/Netbook.
2. Odin3 v3.09 or any other
3. odin_recovery.tar.md5.V_3.0.0.0.zip
4. Samsung USB Driver
5. USB Cable.
Click to expand...
Click to collapse
How to install for ODIN:
1. Install Samsung USB Driver on your PC/Laptop or something else
2. Extract odin and odin_recovery.tar.md5.V_3.0.0.0.zip in the same folder
3. Open Odin
4. Reboot phone in Download Mode by pressing and hold Home + Power + Volume Down buttons)
5. Connect phone and wait until detected on odin
6. Add the recovery.tar.md5 file to AP / PDA
7. Make sure re-partition is NOT ticked
8. Click the start button, sit back and wait a few minutes
9. Wait until the flashing process is complete
Click to expand...
Click to collapse
How to go recovery for installing flashable zip:
1. Turn off you phone
2. Press and hold together Volume up + Home + Power buttons until phone vibrate then let go.
3. Now you are in recovery mode.
4. Select install TWRP_SM-G355HN_3_0_0_0.zip
Click to expand...
Click to collapse
Warning:
Please do not try to repartition ext-sd with twrp because I didn't get that far. If you really need that use your PC and micro usb adapter.
Credits goes to:
- TeamWin
- OmniROM (for bootable recovery)
- CyanogenMod (for sources)
- Me
- And all who contributed
My sources on github who want to contribute:
https://github.com/Y300-0100/twrp_android_device_samsung_kanas3gnfcxx
XDA:DevDB Information
TWRP Recovery V2.8.1.0, Tool/Utility for the Samsung Galaxy Core
Contributors
Y300-0100,
Version Information
Status: Stable
Created 2015-01-09
Last Updated 2015-05-18
changes:
- updated to 3.0.0-0
- updated to 2.8.7.0
- MTP function while in recovery stable?? ( samsung have issue with this)
- fixed minor errors
Updates
For those who don't have pc to flash recovery via odin and if they not sure if new one will work must have installed android terminal.
https://play.google.com/store/apps/d...al.androidterm
To back up current recovery type in terminal next:
Code:
su
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery.img
and check is your recovery on your internal storage.
To flash it back type next:
Code:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
No reboot required.
__________________________________________________________
For ODIN use recovery files are attached.
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
SMCORE2 said:
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
Click to expand...
Click to collapse
As I said before we need team for that. So...
Y300-0100 said:
As I said before we need team for that. So...
Click to expand...
Click to collapse
Ahhh ok , cuz i read ur comment just now so , im sorry
I have been doing some research about important backup of samsung files so I found that backup of EFS is very important because it's folder contains
Phone-specific information such as the IMEI, wireless devices MAC addresses, product code, and much more. If this thing not handled properly, can turn your device completely useless as it will no longer be recognized by your carrier.
Problem is, flashing custom ROMs sometime can corrupt contains within EFS folder. That’s why backing up EFS folder is very important if you love to flash new ROM.
Click to expand...
Click to collapse
So I will include that as backup option.
Also same thing with modem looking at twrp github for samsung devices so I will add that to. And my opinion maybe not wise but I think that recovery also need to be included in backup.
That's my 5 cents
Anyone to back me up or to add 5 cents more
Nice work!
Keep it up
Data app 2 ext-sd is possible
picture share
But use pc to partition sd as ext4. I would't like you to screw something. google first how to
And 2nd post updated.
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
younis12c said:
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
Click to expand...
Click to collapse
as
Y300-0100 said:
added
What is left to be done:
- mount as usb/mtp in recovery
- backup cache
Click to expand...
Click to collapse
Some impressions, comments and suggestions would be nice. Because I don't know am I doing this right at all
First of all.. Thanks for your hard work on our SGC2 recovery!
I hope with this, SGC2 has it's own forum as soon as possible
Btw. I confirmed this working for samsung galaxy core 2 duos (G355H) as well
everything looks fine.. touch screen working, but I haven't touched any feature aside from reboot to system which was working
but i believe everything should be working fine
you should change the thread name as your recovery support G355H too :good:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
cleverior.ipul said:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
Click to expand...
Click to collapse
Only omni bootable recovery 4.4 and rest is CM-11.
No need to root the device?(Samsung Galaxy Core 2 DUOS)
novhexzhen said:
No need to root the device?(Samsung Galaxy Core 2 DUOS)
Click to expand...
Click to collapse
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
giew13 said:
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
Click to expand...
Click to collapse
No. What's wrong with current file manager? It's not working?
Works AWSOME bro, great job!!!! THANKS
Y300-0100 said:
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Click to expand...
Click to collapse
thanks matey. i will try this later if there is an available feedback from unrooted phones who install TWRP:good:
Y300-0100 said:
No. What's wrong with current file manager? It's not working?
Click to expand...
Click to collapse
Oh is there already exist
sorry i haven't check it. This is my first device that using TWRP recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.0.2 For Micromax Unite 2
Disclaimer
Code:
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
CHANGELOG for 3.0.2-0:
-
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
Click to expand...
Click to collapse
What's New In Update
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
Installation instructions
By PC
What’s required:
Code:
USB Cable / PC
[URL="http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools"]SP Flash Tool or MTK Flash Tool[/URL]
[URL="http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools"]ADB VCOM Drivers (normally I use PDAnet)[/URL]
Scatter file for your phone
recovery.img
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + power or volDown+power. Depending on your phone it will be one or the other. One way will bring you to factory mode, the other will bring you to recovery.
By Mobile
Root Required And Use Mobile Uncle tool/ Rashr/Flashify
BUGS:
Nope :victory:
Download Links :
TWRP 3.0.2-0 Recovery
Credits:
Dees_Troy (Developer Of TWRP)
EndLess (For Building Recovery And Fixing Invert Touch )
Charansai (For Helping In Porting Of recovery)
Ayush Rathore (For Testing & Porting Recovery)
Pranto (For Material TWRP)
All Testers For Testing
HIT THANKS THIS WILL NOT COST YOU
XDA:DevDB Information
TWRP 3.0.2-1 Recovery, Tool/Utility for the Micromax A106 Unite 2
Contributors
Hell7, Charansai, Ayush rathore, Monty kumar
Source Code: http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2016-04-29
Created 2016-04-29
Last Updated 2016-05-03
Reserved
Reserved
Sperate Thread Nice
But ,Give Credits For @EndLess Also
Insllation method please
And 1 question can we install all custom roms through it
Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse
Added
Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse
Everything Is In OP Itself For PC .. Via Mobile Means Use Rashr or Flashify or Mobile Uncle Tools(Not Available Now In Gplay [If you want it means Download it from 3rd Party Websites] ) From Google Play ..
These Steps Will Be Suitable for Mobile Uncle Tools Only..
1) Download the Recovery Image
2) Rename it to recovery.img(change the Real Name(For Ex - MicromaxA106Recovery.img) of the Recovery image to "recovery"( No Quotations)
3) Move your img file from the Downloaded Folder to the Root of your Internal Storage
4) Now Open Mobile Uncle Tools & Grant Root Rights
5) Then Click Recovery Update Option, The You Will Find Your recovery.img file on the top ..
6) Click it , it will ask for Flashing ,Select OK then Reboot .. Voilà That's it ..
For Rashr & Flashify No Need of these Steps ..Just Install the App & Select the Download Image from Your Storage & Flash it ,Reboot It..
Good Luck ..
Yeah Via Custom Recoveries,You Can Install it.. That's What its all About ..
Added all method for flashing recovery via pc and without pc
Now hit thanks
Hell7 said:
Added all method for flashing recovery via pc and without pc
Now hit thanks
Click to expand...
Click to collapse
Add Instructions for Without PC ..Maximum Users Don't Want PC To do This..They Will Prefer the Easy Way(App) .. So if Can Update the Instructions For that..It'll Help New Users a Lot..
LoverBoy2415 said:
Add Instructions for Without PC ..Maximum Users Don't Want PC To do This..They Will Prefer the Easy Way(App) .. So if Can Update the Instructions For that..It'll Help New Users a Lot..
Click to expand...
Click to collapse
Its simple install app - download recovery img - open any given apk and flash
Well i add in mornings
Hell7 said:
Its simple install app - download recovery img - open any given apk and flash
Well i add in mornings
Click to expand...
Click to collapse
Hmmm ..
Mention Source Thread
How to port these for my xolo q1010i
I have 6mb of partition for recovery
Upside Down
weirdly the recovery is upside down for me
charansai said:
Mention Source Thread
Click to expand...
Click to collapse
Ohh i forgot wait i add
prabhuinbar said:
weirdly the recovery is upside down for me
Click to expand...
Click to collapse
Bug but working fine
[email protected] said:
How to port these for my xolo q1010i
I have 6mb of partition for recovery
Click to expand...
Click to collapse
Help him @charansai
[email protected] said:
How to port these for my xolo q1010i
I have 6mb of partition for recovery
Click to expand...
Click to collapse
Follow The Thread Here
Hit Thanks If I Had Helped You
yesh u can
Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse
Can I flash it via SPFT on my Unite 2 running stock KitKat? Btw, I'm having the 4 gig variant... It's my uncles phone & I wanna root it
TIA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* [B][U]Your warranty is now void.[/U][/B]
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Odin
- Odin3 v3.13.3
Heimdall
- Glass Echidna
TWRP for Samsung Galaxy Note 3 (Americas, China, Europe & Korea)
How to flash TWRP with Odin1. If your phone is turned on normally, turn on Advanced reboot in Developer options and select "Download" from the Restart menu. Alternatively, power it off and press the Power, Volume Down, and Home buttons simultaneously. When the blue screen appears, release all 3 buttons and press Volume Up.
2. In Odin, import the appropriate twrp.tar file for your variant with the "AP" and press the "Start" button.
3. Pull the battery as soon as your phone vibrates.
4. You can then boot directly into TWRP by pressing the Power, Volume Up, and Home buttons simultaneously. Release all three buttons as soon as you see the boot screen ("Samsung Galaxy Note3").
How to flash TWRP within a previous version of TWRP1. If your phone is turned on normally, turn on Advanced reboot in Developer options and select "Recovery" from the Restart menu. Alternatively, power it off and press the Power, Volume Up, and Home buttons simultaneously. Release all 3 buttons when the boot screen appears ("Samsung Galaxy Note3").
2. In TWRP, tap "Install" then "Install Image".
3. Navigate in the folder structure to the location of the appropriate twrp.img file for your variant and tap it.
4. Select the "Recovery" radio button.
5. Move the slider to the right to flash the TWRP image.
6. Tap "Reboot System" or, alternatively, tap the back arrow 3 times to return to the main menu, then tap "Reboot" and "Recovery" to reboot into the TWRP image you have just flashed.
Changelog
- See post #2.
Bugs
- You tell me!
Credits
- JCrossleyBrook for feedback and screenshots.
- ashyx, jcadduono, haggertk, and every other open source developer and user who contributes directly or indirectly to the TWRP community in the development of and in providing feedback for the hlte and hltechn.
Sources
- hlte repository
- hltechn repository
- msm8974 kernel repository
- TWRP repository
XDA:DevDB Information
TWRP 3.5.2_9-0, ROM for the Samsung Galaxy Note 3
Contributors
ripee
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 3.5.2_9-0
Stable Release Date: 2021-04-06
Created 2018-02-08
Last Updated 2022-12-09
Reserved
CHANGELOG
3.2.1-1: The test build from TeamWin is here!
* My thanks to everyone who tested my attempts at resurrecting TWRP on the Note 3
* Please test both the IMG and TAR file, you can flash the test build over top of my unofficial build. Please report any changes in stability and functionality compared with my last build, formerly known as v4.
Reserved
Why new thread?
Sent from my Galaxy Note 3 using XDA Labs
banikgames said:
Why new thread?
Sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
So that users can give me feedback more directly, and because I created my own source repo from which I build. The latest one on the TeamWin account is kind of outdated already, which could be why the official 3.2.1-0 is giving problems.
Have you tried my 3.2.1-1 build? Does it flash, boot, ...work? Does it recognize your SD card when formatted in NTFS, exFAT, and FAT32?
I flashed it but my phone cannot boot into system and recovery.
Must flash back old recovery through odin.
can i use aroma gapps using this twrp?
junio07 said:
aroma gapps can be flash using this
Click to expand...
Click to collapse
I don't see why not, please report back either way.
also does not work for me.
a newer TWRP version than 2.8.7.0 with aroma support. That's all we're waiting since years
MarkusOSx said:
also does not work for me.
a newer TWRP version than 2.8.7.0 with aroma support. That's all we're waiting since years
Click to expand...
Click to collapse
Thank you very much for mentioning that version 2.8.7-0 was the last known good one. I took a look at it's source branch and it seems that the partition sizes and bootimage arguments were way off compared with even the values in the lineage 14.1 hlte-common repo.
I just re-built so please try what's up now in the OP link.
Unless I provide different links, everything will be in the OP, and old builds will be overwritten by new ones.
ripee said:
Thank you very much for mentioning that version 2.8.7-0 was the last known good one. I took a look at it's source branch and it seems that the partition sizes and bootimage arguments were way off compared with even the values in the lineage 14.1 hlte-common repo.
I just re-built so please try what's up now in the OP link.
Unless I provide different links, everything will be in the OP, and old builds will be overwritten by new ones.
Click to expand...
Click to collapse
Doesn't boot.
Goes straight into Download mode saying "Could not do normal boot" when trying to access recovery.
Flashing back to the official 3.2.1.0 works fine. It's a tad slow and unresponsive and VERY slow in restoring a Nandroid backup but it works fine for me.
EDIT: I just remembered.. Jairus980 has a TWRP 3.1.1.0 with theme and all that works incredibly well. Shame he hasn't updated it to 3.2.1.0 or 3.2.1.1 yet. Maybe check out his recovery to see what he did different?
You can find it on his AFH. I don't really wanna link to it directly without permission lol.
same. dont boot with this.
m3rishor said:
same. dont boot with this.
Click to expand...
Click to collapse
you try install also via twrp?
vagenrider said:
you try install also via twrp?
Click to expand...
Click to collapse
off course. Both way. Twrp and odin. Revert with odin at 3.1.1.0 and after from twrp to 2.8.7.0 to flash AryaMod. Any Nougat dont detect SIM, and i flash diferent modem/efs
Dont work
Doesn't boot.
Goes straight into Download mode saying "Could not do normal boot" when trying to access recovery.
Same here
New attempt is up now.
How about what's under the link in the OP now? Any difference?
sorry late with this....
SM-N9005ZWEBTU
was on official 3.2.1.0
Kernel 34113 Xenial 26x
Bootloader GBQE1
Baseband GPQB1
Rom RR 585 01012018
Updated to 3.2.1.1 v1 (believe its on v3 now) and all is good. Phone feels faster
not work...
bootloader bqe1
modem boa2
JCrossleyBrook said:
sorry late with this....
SM-N9005ZWEBTU
was on official 3.2.1.0
Kernel 34113 Xenial 26x
Bootloader GBQE1
Baseband GPQB1
Rom RR 585 01012018
Updated to 3.2.1.1 v1 (believe its on v3 now) and all is good. Phone feels faster
Click to expand...
Click to collapse
You mean my current twrp 3.2.1-1 that's on my BasketBuild now? I'm not keeping track of revision numbers since the changes are minor, and anyway code that doesn't work won't serve as the basis for future development.
Can you please let us know if you are able to create and restore backups, both encrypted and unencrypted, on my twrp 3.2.1-1? Does your phone recognize your SD card when it's formatted in NTFS, exFAT, and FAT32?
On another note, thanks for referencing your bootloader and baseband, I didn't realize the ones I uploaded were outdated. I will update my .tar file as well.
Edit: latest bootloader and modem are up.
vagenrider said:
not work...
bootloader bqe1
modem boa2
Click to expand...
Click to collapse
Please try the latest bootloader and modem combination. will edit this post to let you know when they're available in my BL_CP folder on BasketBuild.
ripee said:
You mean my current twrp 3.2.1-1 that's on my BasketBuild now? I'm not keeping track of revision numbers since the changes are minor, and anyway code that doesn't work won't serve as the basis for future development.
Can you please let us know if you are able to create and restore backups, both encrypted and unencrypted, on my twrp 3.2.1-1? Does your phone recognize your SD card when it's formatted in NTFS, exFAT, and FAT32?
On another note, thanks for referencing your bootloader and baseband, I didn't realize the ones I uploaded were outdated. I will update my .tar file as well.
Please try the latest bootloader and modem combination. will edit this post to let you know when they're available in my BL_CP folder on BasketBuild.
Click to expand...
Click to collapse
It does exactly the same. Straight to DL mode with Could not do normal boot error.
Im on QD1 loader and QB1 baseband. The nordic ones that fix the Nougat SIM issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S20 FE 5G G7810, G781B, G781N, G781U, G781U1, G981W and G780G (4G).
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download S20 FE 5G: r8q.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.- Type: multidisabler again. will see - Finished. when done.7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
Click to expand...
Click to collapse
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ooobs007 for testing on S20 FE 5G G781B
ianmacd for multidisabler
Sources:
Kernel tree
Device tree
Changelog:
02.06.2022 - Update to Android 12 kernel source
- Fix mount issues
- Update to TWRP 3.6.2
29.11.2021 - Update to TWRP 3.6.0
- Add Symlinked dynamic partitions to fstab
- Updated to latest kernel source
- Update multidisabler
- fstab clean up
- Fix haptic feedback
23.05.2021 - Update to latest TWRP source, update kernel to G781BXXU3CUD6.
03.03.2021 - Update to latest TWRP source, Add terminal multidisabler script. fstab cleanup.
22.01.2020 - Fix USB-OTG for Q & R builds.
15.01.2020 - Initial build for Android 11
31.12.2020 - Update TWRP to 3.5.0
15.11.2020 - Add TWRP fastbootd support, Move kernel to gz format.
11.11.2020 - Initial Release.
Hello,
Thank you very much my friend .
my phone Unlock bootloader ok
install Magisk Manager ok
-----------------------------
just ı want twrp
please exynos s20 fe
arlequin2k3 said:
Hello,
Thank you very much my friend .
Click to expand...
Click to collapse
Welcome, Enjoy.
bylumax said:
my phone Unlock bootloader ok
install Magisk Manager ok
-----------------------------
just ı want twrp
please exynos s20 fe
Click to expand...
Click to collapse
Exynos not supported. maybe in future.
afaneh92 said:
Supported Models:
Galaxy S20 G7810, G781N, G781U, G781U1 and G981W.
Click to expand...
Click to collapse
So it doesn't work with the G781B version, right?
ilMerovingio said:
So it doesn't work with the G781B version, right?
Click to expand...
Click to collapse
Should work with any Snapdragon version with an unlockable bootloader, therefore any non US Fe version.
ilMerovingio said:
So it doesn't work with the G781B version, right?
Click to expand...
Click to collapse
Oh, sorry forgot to add it.
It was tested on G781B.
Hello ,
Okay I just tried to install twrp. So the installation went well but the concern is that it does not recognize my sd card and therefore cannot access the multidisabler and magik files to continue ....
I also tested by putting everything on a usb key and the same problem .....
arlequin2k3 said:
Hello ,
Okay I just tried to install twrp. So the installation went well but the concern is that it does not recognize my sd card and therefore cannot access the multidisabler and magik files to continue ....
I also tested by putting everything on a usb key and the same problem .....
Click to expand...
Click to collapse
You can push them through adb to any place like root / or /data
Also you can use external sd!
Try to copy files to sdcard while you booted to system!
USB OTG will be fixed next build.
afaneh92 said:
You can push them through adb to any place like root / or /data
Also you can use external sd!
Try to copy files to sdcard while you booted to system!
USB OTG will be fixed next build.
Click to expand...
Click to collapse
Your idea to connect the pc to the phone to seem to work. Twrp recognized the twrp file on my disk and I introduced the 2 files. And there it worked .... Thank you very much for the idea.
Silly question but can I still install OTA updates if I unlock bootloader/flash custom recovery or root the phone? And will stock recovery flash every time I install OTA update?
Thanks in advance
Is there magisk that we can root? Any guides on it please.
Huberttus said:
Silly question but can I still install OTA updates if I unlock bootloader/flash custom recovery or root the phone? And will stock recovery flash every time I install OTA update?
Thanks in advance
Click to expand...
Click to collapse
Flashing multidsabler make some changes to system and vendor. So no OTA, Flash full firmware instead.
Nchls said:
Is there magisk that we can root? Any guides on it please.
Click to expand...
Click to collapse
Flash magisk zip in TWRP or patch boot.img using magisk manager and flash via odin.
New build up!
15.11.2020 - Add TWRP fastbootd support, Move kernel to gz format.
After installing this will i use knox stuff like secure folder?
tabish84 said:
After installing this will i use knox stuff like secure folder?
Click to expand...
Click to collapse
No, you need to fix them to work again.
Hello ,
This update can be installed directly or must first be installed the 1st version. I ask this question given the size difference between the 2. Thank you for your answer .
arlequin2k3 said:
Hello ,
This update can be installed directly or must first be installed the 1st version. I ask this question given the size difference between the 2. Thank you for your answer .
Click to expand...
Click to collapse
Yes can be flashed directly, You can see in changelog that we moved to gzip format, that explain the size difference.
afaneh92 said:
No, you need to fix them to work again.
Click to expand...
Click to collapse
Where is the fix?
Team Win Recovery Project
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Disclaimer:
I am not responsible about any damage of any kind that this custom binary may cause.
Please pay attention to this post & related ones before proceeding and follow the guide correctly. I will not offer support for any issues that have been already stated.
Your Knox Warranty Bit will be blown once you flash this or others custom binaries, preventing you to use Knox features. It can't be resetted in any way, so think twice before flashing this.
Bugs can be reported here in XDA or via the community's Telegram Group. Please be more clear as possible and make sure you provide detailed info when reporting bugs.
How do I flash and set it up correctly?
Please notice that the following guide is meant for full stock devices, if you've already rooted your device you can skip it and flash directly the recovery without any extra steps.
Before starting, make sure to backup all your data and important files stored in your phone, since this procedure will format your data partition.
Download Odin3, Samsung's Android USB Drivers, the latest TWRP's tar and a disabled vbmeta image.
Make sure your phone's bootloader is unlocked, follow the guide below in case it isn't:
How to unlock bootloader ?
Open the Settings app, enter Developer Options and enable OEM unlocking (If you don't see Developer Options, enter into About phone>Software info and tap "Build number" 10 times to show it).
Enter Download Mode: to do so power off your device, connect it to a computer via an USB cable and hold both volume up and volume down buttons.
Long press volume up to unlock the bootloader. This will wipe your data and your phone will automatically reboot.
Go through the initial setup. Skip through all the steps since data will be wiped again later. Make sure to connect the device to Internet during the setup.
Enter Developer Options and check that the OEM unlocking option exists and is grayed out. This means our bootloader is unlocked and your phone has no KnoxGuard lock set.
How to install ?
Connect your phone to your PC and boot in Download Mode (power off your device and hold both volume up and volume down buttons).
Open Odin3, select the TWRP tar by clicking the "AP" button and the patched vbmeta tar by clicking "USERDATA", then press the Start button.
Reboot your phone in recovery mode: while it still plugged in your PC, hold both the power and volume up buttons.
Once TWRP has booted you need to format again your data partition in order to be able to boot in system again. To do so touch Wipe>Format Data and follow the instructions in screen.
Bugs:
-
Thanks:
TWRP team
- Samsung opensource kernel
- @BlackMesa123 for device tree and kernel Samsung Galaxy A52s.
Sources:
- Kernel tree : https://github.com/samsung-778/android_kernel_samsung_sm7325/tree/twrp-12.1
Changelog: 11/05/2023
- Support Android 13 decrypt with no password
CHECK LINK LAST ON POST
Hello
nguyenhung9x2018
could you let me know if i can use these files for galaxy m625f as i am not finding anything on the subject for this model, could you help me with this? Thank you very much in advance
rickgermano said:
Hello
nguyenhung9x2018
could you let me know if i can use these files for galaxy m625f as i am not finding anything on the subject for this model, could you help me with this? Thank you very much in advance
Click to expand...
Click to collapse
Samsung Open Source
opensource.samsung.com
Great to see the development got started for the Galaxy A73! Eagerly looking for more under specified forum!
nguyenhung9x2018 said:
Samsung Open Source
opensource.samsung.com
Click to expand...
Click to collapse
Hello! Thanks for the link , but this zip I can do the installation by odin ?
rickgermano said:
Hello! Thanks for the link , but this zip I can do the installation by odin ?
Click to expand...
Click to collapse
it is tar, you can install it with odin
How do I disable vb meta?
Update link download vbmeta disable
nguyenhung9x2018 said:
Update link download vbmeta disable
Click to expand...
Click to collapse
Any updates on decryption?
Are we going to have any Custom ROMs for this phone?
n0tluke192 said:
Are we going to have any Custom ROMs for this phone?
Click to expand...
Click to collapse
i think no, cuz it uses f2fs
xS1lent said:
i think no, cuz it uses f2fs
Click to expand...
Click to collapse
I build rom custom for a73xq , it booted, but RIL broken
nguyenhung9x2018 said:
I build rom custom for a73xq , it booted, but RIL broken
Click to expand...
Click to collapse
Excuse me, but how do YOU create a custom ROM? If the DATE section is not decrypted???Tell me how is this possible???
kissa67zwi said:
Excuse me, but how do YOU create a custom ROM? If the DATE section is not decrypted???Tell me how is this possible???
Click to expand...
Click to collapse
its because of f2fs and encryption im working with a very lovely dev hes helping me decrypt theres an issue with this recovery might have to rebuild and see but for now if you want to use twrp on oneui5 you can use android 12 bootloader (flash via) i dont recommend this as stuff like vaultkeep will be broken
Cockat0o said:
its because of f2fs and encryption im working with a very lovely dev hes helping me decrypt theres an issue with this recovery might have to rebuild and see but for now if you want to use twrp on oneui5 you can use android 12 bootloader (flash via) i dont recommend this as stuff like vaultkeep will be broken
Click to expand...
Click to collapse
thank you for your efforts, and with respect to YOU and YOUR friend- I will look forward to YOUR efforts and updates.....I'm just using LIGICK now and it works..... I have UI5, but I'll wait for DATA decryption
Any custom kernel available?
So can mount r/w
rajnimal nimal said:
Доступно ли какое-либо пользовательское ядро?
Так можно смонтировать r/ w
Click to expand...
Click to collapse
вроде бы ещё пока нет
rajnimal nimal said:
Any custom kernel available?
So can mount r/w
Click to expand...
Click to collapse
There is no custom core yet... And RO2RW hasn't been made for SAMSUNG yet...I am also waiting for the issue to be resolved
Just a heads up, samsung open sourced their initial android 13 build right after they send out 2023 january security update. So they are gonna follow a build late it seems.
https://opensource.samsung.com/uploadSearch?searchValue=SM-A736
I hope to contribute to this phone's development but in it's current state I do not have enough knowledge to be useful. Once it's matured enough and I got enough taste of oneui you can be sure to see me again mate, good luck with the work ahead.