Hey guys. Today I tried to update my Moto G XT1039 EU version from CM12.1 to CM13. Firstly I tried to update my recovery... after some time i made it with problems. To open recovery i had to use command "fastboot boot recovery.img" and then it opened (I occured Boot up failed problem). Once I made it i went straing to erase any necessary data and I tried to install newest ROM which is CM13 and new gapps file. CM13 installed properly but gapps didnt. But i tried to turn on phone and see if it works anyway. Well... since then now i cant turn on phone becasue the only thing works is fastboot flash mode. I cant install any recovery file becasue i have Boot up fail problem, yet i cant open it via command prompt because Failed (Remote Failure). When i type "fastboot devices" my PC sees it. My bootloader version is 41.1A.
Is there any chance i can have that CM13 installed properly or at least to have it working at all?
Related
Hi to XDA comunity
... and happy festive season
I tried to install a new ROM. So, I followed tutorials and I have a huge problem
I passed to unlock the tablet
But, when I tried to install the new Recovery, the installation failed and now, the tablet doesn't want to boot
When I boot normaly, in recovery mode or Fastboot mode, I get this message :
Code:
Bootloader Version JB-653b3d3 (Unlock Mode)
Entering boot menu mode
Booting failed
Bootloader VJB-653b3d3(UnlockMode): Starting Fastboot USB download protocol
When I send "Fastboot device", the device is shown
When I send "Fastboot flash recovery twrp-2.6.3.0_a700.img"
Code:
sending 'recovert' <5736 KB>...
But still indefinitely
So I stop and retry and I obtain
downloading 'boot.img'...
FAILED <commande write failed <Unknow error>>
finished. total time: 0.???s
i tried to erase recovery and retry.
Tried with several USB cables.
I don't know what to do...
I guess it's a fastboot problem ? How can I found a fastboot file ?
Thanks for any help !
grimnnir said:
Hi to XDA comunity
... and happy festive season
I tried to install a new ROM. So, I followed tutorials and I have a huge problem
I passed to unlock the tablet
But, when I tried to install the new Recovery, the installation failed and now, the tablet doesn't want to boot
When I boot normaly, in recovery mode or Fastboot mode, I get this message :
Code:
Bootloader Version JB-653b3d3 (Unlock Mode)
Entering boot menu mode
Booting failed
Bootloader VJB-653b3d3(UnlockMode): Starting Fastboot USB download protocol
When I send "Fastboot device", the device is shown
When I send "Fastboot flash recovery twrp-2.6.3.0_a700.img"
Code:
sending 'recovert' <5736 KB>...
But still indefinitely
So I stop and retry and I obtain
downloading 'boot.img'...
FAILED <commande write failed <Unknow error>>
finished. total time: 0.???s
i tried to erase recovery and retry.
Tried with several USB cables.
I don't know what to do...
I guess it's a fastboot problem ? How can I found a fastboot file ?
Thanks for any help !
Click to expand...
Click to collapse
make sure you have the a700 and not the a701 or a510 etc etc....
also, you could try booting directly into fastboot:
1. power off
2. hold power and volume down, while you're doing that, constantly change the rotation switch from lock unlock lock unlock.... keep doing it for about 5 seconds
try flashing from here... it might give you the same result but worth a try.
other possible problems:
1. the recovery you downloaded is corrupt
2. the recovery you downloaded was not a working version
3. you might not have the right usb drivers installed
4. you might have used the wrong recovery commands
5. command (sometimes) needs to be Run as Administrator on Windows (right click)
6. you might have waited too long to reboot to recovery, or used the wrong method to do it
it might make it easier for you if you just rename recovery on computer to recovery.img (so you can just type fastboot flash recovery recovery.img)
also, I have uploaded a copy of the recovery I'm using (it's newer)
you can also try (while in fastboot)
Code:
fastboot boot twrp.img
(or any custom recovery)
It should boot without flashing, and from there you're will be able to flash firmware, ROM, etc...
Shreps said:
you can also try (while in fastboot)
Code:
fastboot boot twrp.img
(or any custom recovery)
It should boot without flashing, and from there you're will be able to flash firmware, ROM, etc...
Click to expand...
Click to collapse
it might be fine but personally I would not try that... recovery and boot are not to be confused and bootloaders are not to be messed with
Hello,
I was facing a lot of issues with my YUPHORIA. So, I tried to flash it using the official instructions on official forum using Fastboot.
The flashing got stuck when it was trying to flash the "system" partition. I disconnected the cable and tried the flashing process again.
Now, I am able to flash everything else except "system"
It is giving an error -
"FAILED (remote: flash write failure)"
ADB is not detecting my phone.
QFIL is also showing "No Ports Found"
However, Fastboot is working fine.
I donot have TWRP on my phone as of now.
Please help !
I am having exact same problem. Were you able to find solution for it?
Same issue here
Did you get the final solution?
I cant not flash system.img to my softbricked Yu Yuphoria 5110 even with the latest version of adb and fastboot and even with the -S option! Nothing works! Can't flash only system.img, other images are getting flashed. Pl help!
Hi. My device had a virus rom, and there was no way i could clean it. So i tried to install twrp and new android. But while i was updating in TWRP, it got stuck, and locked. Now i don't have any recovery or android.
My device is unlocked.
I tried installing TWRP 3.0.2 and 3.0.0 with "fastboot flash recovery twrp.img"
After this it says ok. Then when i try to "fasboot boot twrp.img" it says,
booting...
FAILED (remote dtb not found)
I unlocked device with Xiaomi unlocker. But i'm stuck. Can someone help please?
Ok i solved it by installing twrp 3.1.
Dear community. I screwed up.
I purchased my new OP7P and in all my excitement, logically, the first thing I went to do was to unlock the bootloader, install TWRP and root it, which I did successfully because I am pretty familiar with this on multiple phones. Long story short, here's what I did, and where my problem lies:
1. Went to install the Havoc Custom ROM by following their installation instructions, went ahead and booted to TWRP recovery
2. As instructed, wiped dalvik and /data
3. Flashed Havoc ROM and here is the part where I was supposed to flash TWRP installer
4. Forgot to reflash TWRP installer and rebooted to the now nonexisting recovery. - getting the dead android icon with the message "NO COMMAND"
5. After holding VOLUP + POWER managed to turn it off and then turn it on again with just POWER to be greeted with a message warning me that I am in a bootloop
and that I have two options; to try again or to "reset to factory settings", which I did, which booted me into the HavocOS.
The main problem here is that for some reason whenever I try to repeat the TWRP installation process using fastboot, by entering "fastboot boot twrp.img", it gives me the following error:
downloading 'boot.img'...
OKAY [ 1.340s]
booting...
FAILED (remote: unknown command)
finished. total time: 1.343s
I have tried this on both Linux & Windows, same deal. The TWRP website has mentioned that if this happens I need root, but how do I root my phone without TWRP or "fastboot boot", and how do I install TWRP on the OP7P without livebooting TWRP?
Any help at all is truly appreciated. Thanks guys.
Download the MSM tool here and restore your phone. I've never used it but it gets everyone out of a brick.
I've used this tool a few times and it has gotten me out of a jam, just be sure to download the correct version for your phone. AFA your fastboot error, I got that until I let the OTA update to 9.5.11, then it worked again. https://forum.xda-developers.com/oneplus-7-pro/development/tool-tool-one-driversunlocktwrpfactory-t3930862
x3lade said:
The main problem here is that for some reason whenever I try to repeat the TWRP installation process using fastboot, by entering "fastboot boot twrp.img", it gives me the following error:
downloading 'boot.img'...
OKAY [ 1.340s]
booting...
FAILED (remote: unknown command)
finished. total time: 1.343s
Click to expand...
Click to collapse
Try to fastboot boot the TWRP build -70 from here: https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
It fixes the problem with "fastboot boot" not working on the official Android Q update. Not sure why that would apply to your case (custom ROM after already successfully installing TWRP). But it's very easy to try, and certainly can't hurt. And the error message you are getting is exactly the same as the official Android Q problem.
Hello guys, as we known that it is unable to use command in fastboot to boot into TWRP if we are on Android 10 (both OOS and Custom rom) at the moment, so here is the simple command allow us to do that if you want to roll back android 9 or any rom by TWRP
fastboot flash boot_a <twrp name.img>
fastboot flash boot_b <twrp name.img>
fastboot reboot
Your phone will automatically boot into TWRP, so you can flash another rom
Can anyone confirm this works?
I tried something similar when I first installed OOS 10, and I successfully booted TWRP, but I ended up getting a bootloop (stuck at the g.co/ABH warning thing) when I rebooted to system. I don't know if I did something wrong, or flashing twrp to both boot partitions caused it.
I would try again, but I'm on a critical work trip until the end of the month, so my phone's uptime is expected to be 100% until then.
worked for me while anything else didnt
LazerH said:
worked for me while anything else didnt
Click to expand...
Click to collapse
Does it wipe your data?
Didn't work for me. My boot image was patched already this is probably why.
ok, I tried this, but as reported above, now also stuck on this same: "I tried something similar when I first installed OOS 10, and I successfully booted TWRP, but I ended up getting a bootloop (stuck at the g.co/ABH warning thing) when I rebooted to system. I don't know if I did something wrong, or flashing twrp to both boot partitions caused it."
How do I resrore operation for my phone? (help?)
Well, I met this issue before, and ended up with using this method to successfully boot into twrp.
This issue seems to appear on OOS, when I using `fastboot boot xxx.img` on other ROM like omni, I'm able to boot into twrp, thanks!
can someone help me please. my phone is stuck in a fastboot bootloop. everything I try doesn't work.
fastboot boot TWRP.img NOTHING
tried your solution above and still nothing
Still stuck in fastboot this is what I get:
PS C:\Users\Les Brown\Desktop\OnePlus 6> fastboot boot twrp-3.3.1-17-enchilada-Q-mauronofrio.img
downloading 'boot.img'...
OKAY [ 0.617s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.655s
@killathenoob Download DECRYPTED OOS 10.3.0 with this help if you don't really know what to do with this.
For others people (and you if you want to root or just install TWRP after fresh OOS10 Decrypted install) don't forget to OEM unlock before doing anything.
Download this
Copy "twrp-3.3.1-17-enchilada-installer-mauronofrio.zip" into internal storage of your OP6
Power it OFF
Power it ON in fastboot mode
Launch "Boot TWRP.bat"
Connect your OP6 to your PC and wait for TWRP to boot
Install twrp-3.3.1-17-enchilada-installer-mauronofrio.zip
Reboot to recovery and install magisk if you need to.
Source
Hope I helped a bit.