Related
Firstly, my screen does not show visuals. I can still touch the screen and make things happen, but it is just a back-lighted black screen. I have answered calls on it and such. Basically I'm returning it and getting a new one.
Since I am getting a new one, I want to see if anyone ever heard of this problem and to see what the cause of it is, for prevention purposes.
I didn't get it wet (the white sticker in the back is still white.) Though I have flashed PROven ROM to it a couple months ago (it's a great ROM by the way), but could that have messed up my screen?
I also wanted to know since I can't see the screen, would I have to, for warranty purposes, (blindly) reflash to the Stock ROM?
Thanks in advance!
Yeah, you probably oughta return it to stock configuration (good luck on that!). If you're really lucky, that might even fix the problem. Have you done a hard reset yet? Might be worth a try, although it certainly sounds like a hardware problem.
Sounds like the flex cable has gone bad
Exactly same thing happened to me this Tuesday. Luckly I backed up info to memory card using PimBackupV2.8 with remote control software on my PC. With the remote contol tool, I could see everything as if on my phone and icons are clickable.
Hard reset did not fix the issue. I then flashed the shipped official ROM and stock SPL for warranty purpose. Will send the phone to them today for repair.
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
asdiqa said:
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
Click to expand...
Click to collapse
Summer is coming...
Sometimes they make updating phones too easy......
The back of my phone often gets hot I have to use the edges to hold it even though it was not a hot day and it is in my pocket.
blank screen
ya so my screen is blank white
but everything else works
i've heard something about this being a faulty "flex cable"
how can i fix this?
thanks so much for your help
how do i fix this???
did you eventually find out how to fix this/???
u ever end up fixing that? how?
thankss
Mine was still in warranty so I rang Vodafone. They sent me a special delivery envelop the following day. I sent it back to them. The following day I got a text message from them saying they got it and was working on it to fix the fault. The next day received another message saying the device was on the way back to me and I should receive it the following day.
Actually they sent me back a replacement
So.. basically.. is this a faulty flex thing?
I had the same problem for the last week until today i was about to buy another one since i dont have any warranty for this one.. I searched google and saw somebody say that just putting a business card between the keyboard and the lcd and then slide it and it works so far
hope it helps everybody
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
eelpout said:
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
Click to expand...
Click to collapse
Did you end up fixing it? I have the same problem.
same thing happened to me Twice.... in my sleep overnight. I LOOOOOOOOVe my raphael but man this was the last straw
This maybe of some help for those of you with blank screens. I bought a Touch Pro on ebay that had a very dark screen, occasionally you could just make out some icons being displayed. Using Mymobiler showed that the basic system was working, as was the touchscreen. Other symptoms were that the camera would not work and the keypad lighting was intermittent. Sometimes on connection to Mymobiler a dialog box would come up saying there was an error with Microp?!?
Despite cleaning all internal connections and ensuring they were correctly and securely made the problem remained. I then noticed that the small camera used for video calls (in a socket on the main flex cable) looked very dirty and corroded. I removed the camera module and, using a fibreglass brush, cleaned the contacts on both the socket and the camera module. These were very badly corroded with verdigris.
On putting everything back together I was most surprised to find the screen was now working, as was the main camera. Unfortunately the ROM that is loaded doesn't seem to have any facility for checking the front video camera. There are still problems with sound - both the loudspeaker and the headphones seem to be dead and I have not had the opportunity to test GPS, Wifi, bluetooth, buttons, etc, however I will keep working on it.
Hope this is of help to someone.
Well, this isn't the best place to ask, but I'm not sure where else to do so. Somehow I managed to drop my phone (onto a carpeted floor from not quite a full standing height, not concrete or anything) and it landed right on the bottom I think. I can't see any signs of damage anywhere at all -- I even pulled out the screws and looked at the PCB itself and I just can't see anything obvious at all. Unfortunately, something obviously is wrong all the same. It simply will not charge at all most of the time, though seemingly randomly on a whim when I connect it sometimes it will. I'm afraid even to touch it once it finally does as just moving the cable around seems to be enough to make it stop sometimes (whereas at some other times I can move it around a lot and everything and it still stays connected.) Last night it decided not to even charge even though the LED indicator and the icon showed that it was connected. What's more, I can no longer use the USB OTG capability to plug in USB drives, other devices, and etc (which I used for diagnostics, repairs, and etc of other things on the go.) I have multiple batteries and external chargers, so this isn't completely fatal but it means:
A. I can't keep it from running the batteries down in the first place (which means larger wear and tear on the batteries long-term since they are discharged further before charging.)
B. Since it's like this it means generally speaking it's not as ready for a fully day of use since it's starting the day with less than 100% charge before I even leave for work every time now.
C. I really did use the USB OTG feature and have already been missing it. It's not as fatal as devices like my Nexus 7 (since that lacks a MicroSDHC card reader to supplement its internal storage whereas this has one) but very annoying at least.
D. I really really miss being able to use a phone dock! I was docking it in my car to keep it at least semi-charged and to output a line output to my car stereo system. It's kind of a pain having to change the volume back and forth between headphones and line output (since a line output really needs the full volume) and obviously it uses more power while playing than just sitting quietly in a pocket anyway. I also liked the way in the dock it wouldn't completely shut off the screen, just go into a really low power mode where it had a faded clock (might be a CM10.1 feature, but nice wherever it came from) and I could just touch it to get back to the player controls.
At first I thought it was just loose, so I tried putting a very thin piece of plastic in the top part of the connector so the connection is extremely tight which fooled me at first by pretending to work really well for a while, but then after a while it just did the same stuff all over again (so it was just doing that thing where it works fine for a little while even when I move the cord around.) I just can't see what could possibly be the problem though because if there is any damage anywhere I'm just not seeing it. I really don't see how the connector could have been damaged anyway since it more or less landed straight on the middle of the bottom (and that ring that goes around the side should have absorbed the shock) but with no cracks on the PCB or anything that I can at all see I can't imagine what else it might be -- plus a few times when it decided to charge it was just sitting flat not being touched and suddenly started working randomly. It really is like it just works on a whim here...
So I'm wondering: just how screwed am I here? I don't have any sort of drop insurance -- I've never dropped a phone in a way that damaged it before -- and I don't think there's any way I could afford the ridiculous amounts they'd surely want for a repair (not to mention that for a while I'd have no phone at all if I did that...) I thought about changing out the connector myself (I see one on Amazon for $8 which is ridiculous, but obviously it has to be the exact same connector) but I'm not terribly confident about desoldering and resoldering something with such small connectors as it is and that one is hard to get to anyway. Besides which, I'm not convinced it is the connector even if I can't see what else it could possibly be. What could possibly be causing it to be quite so random about this? Is there any way at all I can fix this myself, or is this something where the only way of ever getting it fixed would be to take it in for repair at extreme cost (and no phone for a while too)? Anyone have any idea what it might cost for such a repair?
Well I'm sure you noticed the metal charging usb port that is connected to the circuit board.
It sounds to me that it may have broke free a little bit and not making a solid connection.
First thing I would do is try some one else's charger and see if it works ( Just in case)
Then If that failed I would take apart the phone and inspect the connector.
Ten screws on the back plastic and one little black one on the circuit board.
Next you pop off the ribbon connectors and finally pop off the wire connector that runs along the right side of your phone when laying face down,
Double check all connectors and remove circuit board carefully.
Now you will be free to inspect connector
For all you know. Pushing it down with some pressure on the thumb may give you the connection you need again and you should be good to go.
But you really need to see what's broken before you go to fix it.
Good luck. Pm me if you need further help
Well, like I said, I opened it up and I just can't find any signs of damage to the connector or the board. Also, if you look at the SGS3, the connector is actually inside the casing somewhat, so really I don't see how it could have bee damaged anyway -- I'm just not sure what else it could be since, as I said, I also couldn't find any cracks in the PCB or anything.
Oh, and I've used four different chargers and at least three different cables. One charger and cable is the OEM set for the SGS3 and another is the OEM set for the Nexus 7 (which is probably a decent amount more more power hungry.)
Nazo said:
Well, this isn't the best place to ask, but I'm not sure where else to do so. Somehow I managed to drop my phone (onto a carpeted floor from not quite a full standing height, not concrete or anything) and it landed right on the bottom I think. I can't see any signs of damage anywhere at all -- I even pulled out the screws and looked at the PCB itself and I just can't see anything obvious at all. Unfortunately, something obviously is wrong all the same. It simply will not charge at all most of the time, though seemingly randomly on a whim when I connect it sometimes it will. I'm afraid even to touch it once it finally does as just moving the cable around seems to be enough to make it stop sometimes (whereas at some other times I can move it around a lot and everything and it still stays connected.) Last night it decided not to even charge even though the LED indicator and the icon showed that it was connected. What's more, I can no longer use the USB OTG capability to plug in USB drives, other devices, and etc (which I used for diagnostics, repairs, and etc of other things on the go.) I have multiple batteries and external chargers, so this isn't completely fatal but it means:
A. I can't keep it from running the batteries down in the first place (which means larger wear and tear on the batteries long-term since they are discharged further before charging.)
B. Since it's like this it means generally speaking it's not as ready for a fully day of use since it's starting the day with less than 100% charge before I even leave for work every time now.
C. I really did use the USB OTG feature and have already been missing it. It's not as fatal as devices like my Nexus 7 (since that lacks a MicroSDHC card reader to supplement its internal storage whereas this has one) but very annoying at least.
D. I really really miss being able to use a phone dock! I was docking it in my car to keep it at least semi-charged and to output a line output to my car stereo system. It's kind of a pain having to change the volume back and forth between headphones and line output (since a line output really needs the full volume) and obviously it uses more power while playing than just sitting quietly in a pocket anyway. I also liked the way in the dock it wouldn't completely shut off the screen, just go into a really low power mode where it had a faded clock (might be a CM10.1 feature, but nice wherever it came from) and I could just touch it to get back to the player controls.
At first I thought it was just loose, so I tried putting a very thin piece of plastic in the top part of the connector so the connection is extremely tight which fooled me at first by pretending to work really well for a while, but then after a while it just did the same stuff all over again (so it was just doing that thing where it works fine for a little while even when I move the cord around.) I just can't see what could possibly be the problem though because if there is any damage anywhere I'm just not seeing it. I really don't see how the connector could have been damaged anyway since it more or less landed straight on the middle of the bottom (and that ring that goes around the side should have absorbed the shock) but with no cracks on the PCB or anything that I can at all see I can't imagine what else it might be -- plus a few times when it decided to charge it was just sitting flat not being touched and suddenly started working randomly. It really is like it just works on a whim here...
So I'm wondering: just how screwed am I here? I don't have any sort of drop insurance -- I've never dropped a phone in a way that damaged it before -- and I don't think there's any way I could afford the ridiculous amounts they'd surely want for a repair (not to mention that for a while I'd have no phone at all if I did that...) I thought about changing out the connector myself (I see one on Amazon for $8 which is ridiculous, but obviously it has to be the exact same connector) but I'm not terribly confident about desoldering and resoldering something with such small connectors as it is and that one is hard to get to anyway. Besides which, I'm not convinced it is the connector even if I can't see what else it could possibly be. What could possibly be causing it to be quite so random about this? Is there any way at all I can fix this myself, or is this something where the only way of ever getting it fixed would be to take it in for repair at extreme cost (and no phone for a while too)? Anyone have any idea what it might cost for such a repair?
Click to expand...
Click to collapse
You might as well try it yourself THEN go somewhere if it doesn't work out. I wouldn't think if things go horribly wrong that you'd do damage that isn't reversible, and if there was damage it would likely be just to that $8 piece.
You sound like a knowledgeable guy though, so I'd give it a shot.
Sent from my SCH-I535 using xda app-developers app
The thing is, I don't really want to spend the $8 (I'm getting pretty broke) and have to try to desolder then resolder those tiny contacts on a board I'm not even entirely sure how to safely get out possibly messing something else up along the way when I'm not convinced it is the connector (and obviously if I messed something else up along the way I could make things a lot worse -- for instance, breaking it entirely...) Things that should make it work if it were (jiggling and shaking it for instance) don't seem to and then some things that should work don't (for example, last night I disconnected the phone from one charger and connected it to another while it was at least pretending to work and it stopped even though the connector part didn't get moved at all.)
That's my real concern in the end. If it's not the connector, what is it? I'm not 100% confident about trying to replace it myself as it is, but if it's not that the time, money, and effort would be wasted...
Well that's that. The problem, as I feared, was more fundamental (which is part of what I was asking here.) I plugged in something last night and it just shut off. I checked all over and couldn't find shorts or anything to explain it. Even after leaving the battery out overnight it still won't come on. Clearly the problem was much more fundamental than it seemed. Regardless, the question of the connector is moot now. EDIT: It might have been caused by the connector after all. It seems like there are pins at the back that either are loose or were knocked loose by the fall. I THINK one of them was touching another causing a short. Unfortunately, it's too late to discover that now as either way the damage is already done and it no longer works even after I got them straightened out.
I have searched for similar issues, nothing posted. My phone went swimming with me the other day, DOH!
I have thoroughly dried the unit in rice/dehydration powder (works REALLY well by the way). Unit is completely dry, boots up, recognizes sdcard, radios work etc.
Unfortunately the touch screen doesn't work. I have read that the unit may simply need to be recalibrated. I have carefully disassembled the unit cleaned and checked all leads etc. The unit again reboots, everything works but touch screen.
I am thinking about odin new image to see if it recalibrates screen solves problem, any thoughts advice etc?
Might have to replace the lcd
Sent from my MIUI powered S3 thanks to StrumerJohn and using Tapatalk 4. Respect My Authoritah!
A friend if mine experienced the same problem. And now none of the speakers work nor does Bluetooth. Phone is also going in to safe mode quite often. Is it fixable? I've repaired plenty of iPhones, and did remove the back to try to disconnect and reconnect the flex cables to see if that would work but to no avail.
Sent from my HTC One using xda premium
Did you trip the water sensor? I had a similar issue, did not trip the sensor though. I tried some of the recal methods, not sure off the top of my head but i think you have to hold your finger for a certain amount of time in one of the corner, I am sure someone will know how to do it.
However what I ended up needing to do since the re-cal didnt work. I bought a usb otg adapter to connect a mouse to my phone, followed the steps to return it to stock, odin, unroot, triangle away etc, and sent it back to verizon for a replacement with no problems at all.
Same issue:
Phone was soaking in my gym bag because one of my water bottles leaked. It was in there for a good 10 minutes. I took it out. Dried it and put it in rice asap. 24 hours later I take it out and it boots fine, can connect to my computer move files everything. However, the touch screen will not work. Any tips for self repair? Will leaving it in rice longer fix my issue?
Hi everyone, I'm have an issue with my Nexus 5 and hoping someone here can tell me whats going on.
It started off with the sound always cutting out, and I have to press the back part near the "S" logo for it to return.
Eventually the screen would go black but I can clearly see a back light is on. Now not only does the sound cut out, and screen goes blank.
It has become very sluggish to reboot it. I hold the power button until the phone reboots "Google" logo appears and the android animation. Now during this time the phone will be so slow to the point of being crippled out and i have to reboot it again and again until it is normal speed returns. Often it will black out during this time.
I'm just trying to understand what is failing. I tried safe-mode and it still has the issue. I cleared cache, reset the phone everything, nothing appears to fix the issue at all.
edit: I forgot to add, when I'm on YT or listening to music or browsing the web, even though the screen is blank with just the back light on, the sound is still going (when it works). I get text/call notifications still during this time.
My Phone Details.
Nexus 5
Android version, 6.0.1 (MOB30Y)
no ROOT
No replies at all, I guess I may have to garbage the phone. Idk what else to do with this device to fix it.
Please don't throw it away.
You said that pushing at a specific spot fixes the problem (or improves the audio situation). This means that it's a hardware problem. I have disassembled it many times and I know the layout. Behind the 'S' of NEXUS is actually the motherboard cover, and under it are 2 connectors; one for the battery and one for an extra 'board' that is located right underneath the LG logo on your back cover. On that 'board' is your screen connector, and also the speaker rests on there, as well as the primary microphone, 3G and 4G antennas and of course the USB port. The connector for this extra board is actually located a bit to the left on the 'S' (when you look at your phone from the back, it's more below the camera).
Now I have to note this: While using my phone, I have experienced some UI hiccups. At random times (very rarely) everything would just freeze for a few minutes, though music would still play. The power button was useless apart from the hard reset, it was so badly stuck. This was a software problem, although it appeared MOST at one point when my motherboard was faulty. Since I got a new device, it happened again but only once. I'm not sure that this is what you are experiencing. If this is the case, then it's a software fault. Never happened on CM so you can give it a try.
But since it's probably a hardware problem, you can always check it out yourself. Obviously if you have warranty you are covered. Otherwise, you can try disassembling it, at least take the back cover and the motherboard cover off, it's ridiculously easy, there is a disassembly guide from ifixit (I think) online, just be careful not to break the clips of the back cover (xp talking). If you open it, keep away metal things and the first thing you do after you remove the motherboard cover is remove the battery (xp talking again). Obviously turn off the phone properly before you attempt anything. Everything is sensitive in there so be careful. What you should look for is the long connector that connects the extra board that is located at the bottom of the phone with the motherboard. That's what you are pushing so if it's not sitting correctly, then that's your problem.
Plus, everything in there, apart from the motherboard, is cheap and can be found on eBay so don't worry if something is broken (unless it's the motherboard, then no hope ).
I hope I helped.
Firstly thanks for the reply. I did manage to remove the back and get to the connector you were saying. I reseated this and noticed the phone was working much better. I noticed the following still.
When it starts acting slow/crippled pressing this connector fixes the issue. However once the screen goes black with just a backlight this method is rendered useless. Also sometimes when I plug in the wire to charge it will cripple and or go black. So I wondering if the board is shot as you suggested to order a new one, or is it the connector strip ?
Again thank you for the response.
It seems like this board is causing everything. First, check the connector on the motherboard. Make sure that nothing is wrong on the motherboard. Then you can remove the bottom black plastic thing that has the speaker on it and 2 antennas. Then, inspect this board. Check the connector of the display. There is only one big connector on it. This board is glued on the frame of the phone. You can remove it but do it carefully. Do it slowly so that you don't break it. First, remove the antennas extension cables from either this board or the motherboard, and then pull it out.
This board is definately responsible for the black screens and audio issues (unless your display is faulty, check its connector), but I'm not sure about the phone being sluggish. Since this board offers input to the motherboard, I suppose that it could be its fault.
Remove it and inspect everything. Then, if you want, you can order a new one. If you come across D820 and D821 models, I don't think that this part of the phone has anything to do with it so don't worry.
I will take a further look into this for sure, and report back. If you can provide which motherboard is required for my device, so I can also read into this and so that I may order it right-away. Is there any model number or something that indicates which board to order once it is open?
Thanks again!
omega59 said:
I will take a further look into this for sure, and report back. If you can provide which motherboard is required for my device, so I can also read into this and so that I may order it right-away. Is there any model number or something that indicates which board to order once it is open?
Thanks again!
Click to expand...
Click to collapse
You don't need to change the motherboard, not to mention it's very expensive and hard to find. What you need to replace is probably the flex cable that goes below the battery. For example this.
This is not model specific, you can use it with all available Nexus 5 models (D820/D821, 16/32GB) so it doesn't matter what device you have.
FYI, if you think that you should replace your motherboard (you probably shouldn't), you need to take into account the storage (16/32GB) and the network differences (D820 or D821, the only difference is about the 4G networking, the american version has some bands enabled and some others disabled, and vice versa)
Okay, I just ordered the replacement flex cable. It is going to take about a month before it arrives from HK , I hope it fixes the issues. I will respond to this post once it is here and installed. Thanks again.
http://www.ebay.com/itm/271660361300?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
omega59 said:
Okay, I just ordered the replacement flex cable. It is going to take about a month before it arrives from HK , I hope it fixes the issues. I will respond to this post once it is here and installed. Thanks again.
http://www.ebay.com/itm/271660361300?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Click to expand...
Click to collapse
in the meantime, pray it isn´t a motherboard issue, the conector can go bad and lose a few solder joints
I have exactly the same problem... I unmounted motherboard and clean everything but didn't help to much... did you find any solution ??
Siamer no solution just waiting for my delivery of the part. However it is getting worse with the blackscreens and crippled lag.
omega59 said:
Siamer no solution just waiting for my delivery of the part. However it is getting worse with the blackscreens and crippled lag.
Click to expand...
Click to collapse
my is the same. sometimes is working for few hours without any problems and than starting again, on the biggining it was power button problem but not I don't even touch that button (I use vol button to turn on) and sometimes screen getting black (with backlight on) and can't do anything so have to reboot... it's so anoying! Hope that parts will fix it, please let me know if you will find some solution. Today I will open phone and clean all connections etc...
Thanks,
siamer
I believe the part may fix it. I noticed if i run my finger along the strip the phone may uncripple itself or just turn black all together. I'm hoping it fixes it. I will report asap but this HK shipping is so slow it will be a month. Also there is no tracking
ATM i'am just trying to becareful with it trying not to trigger the issue. I just did an OTA update using FlashFire (6.0.1 (MOB31E) i wish v.7 will be available for my Nexus 5 ha ha!
Also if the Nexus 7p arrives I may just buy it to replace this Nexus5.
omega59 said:
I believe the part may fix it. I noticed if i run my finger along the strip the phone may uncripple itself or just turn black all together. I'm hoping it fixes it. I will report asap but this HK shipping is so slow it will be a month. Also there is no tracking
ATM i'am just trying to becareful with it trying not to trigger the issue. I just did an OTA update using FlashFire (6.0.1 (MOB31E) i wish v.7 will be available for my Nexus 5 ha ha!
Also if the Nexus 7p arrives I may just buy it to replace this Nexus5.
Click to expand...
Click to collapse
Hi Omega59.
Today I bought air compressed can(name: air dust) and open my nexus 5 as much as I could. I clean everything, every connector, every cable etc. and last few hours is working fine... even power button is working ok. I will let you know in next few hours how it will be, hope will be still ok
Good luck!
siamer
[edit]
there is still same problem, working better than before, black screen not showing so often but still showing... I think tomorrow I will order oneplus3... Would be nice wait to see new nexus but how... :/
Yeah I'm not sure when the Nexus 7p will arrive, they not even advertised much. I will assume next year?
OnePlus 3 looks nice, but compared to Galaxy 7 it's a bit better slightly. You should check out comparison charts
Maybe they are making a OnePlus 4 soon.
oneplus 3 already ordered. I don't like samsung. I would say nexus "7p" or "pixel xl" will be launch october as always prabaly 4th of october - leaks saing that... next oneplus will be launch around july next year as I know. the only phone that I was thinking about was oneplus, htc10 or new nexus but can't wait to see nexus...
today by excident I broke screen in my nexus 5, got a little bit angry
Regards,
siamer
omega59 said:
Siamer no solution just waiting for my delivery of the part. However it is getting worse with the blackscreens and crippled lag.
Click to expand...
Click to collapse
You probably don't want to hear this, but if it's getting worse, it's probably because of the pressure you apply to it, you make it worse. Be careful when you apply pressure around the motherboard since it's very sensitive. You REALLY don't want to break the motherboard. So if you find yourself pushing on the motherboard too often, you might want to leave it and wait for the replacement part so you won't ruin it.
Waiting for your news...
My part arrived yesterday. I put it in was pretty easy, however the first attempt i had to redo the top connector bc it was still black screen and no audio. After I disconnected the top connector ran some alcohol over it, re-put the top part things are working okay.
Just a note, the little USB connector (charger slot) seems to be very tight compared to the old one. Maybe bc it's new and not as worn down. But even just to put the wire in, requires more of a push, same with removing it.
I will see how it goes before I can really say that was the issue. I will report after a few days about it.
siamer said:
oneplus 3 already ordered. I don't like samsung. I would say nexus "7p" or "pixel xl" will be launch october as always prabaly 4th of october - leaks saing that... next oneplus will be launch around july next year as I know. the only phone that I was thinking about was oneplus, htc10 or new nexus but can't wait to see nexus...
today by excident I broke screen in my nexus 5, got a little bit angry
Regards,
siamer
Click to expand...
Click to collapse
I don't think N7P will be out this year, they have not advertised anything and we are almost in Oct. Right now they are all rumors.
omega59 said:
My part arrived yesterday. I put it in was pretty easy, however the first attempt i had to redo the top connector bc it was still black screen and no audio. After I disconnected the top connector ran some alcohol over it, re-put the top part things are working okay.
Just a note, the little USB connector (charger slot) seems to be very tight compared to the old one. Maybe bc it's new and not as worn down. But even just to put the wire in, requires more of a push, same with removing it.
I will see how it goes before I can really say that was the issue. I will report after a few days about it.
Click to expand...
Click to collapse
When I changed my screen and housing it was difficult to slide the USB connector in too. Just make sure that everything is in place, there is a rubber think for the microphone, maybe that's what's in the way. Don't stress the connector too much.
Around May 2016, I jumped into a pool with my OPO in my pocket. About 10 seconds afterwards I realized what I had done, and pull the phone out of my pocket. The screen wouldn't turn back on, and it started continuously buzzing. Eventually it stopped and I tried to dry it off best I could. Blowing out what water I could and stupidly purchased a bag of rice I kept it submerged in for awhile. Nothing worked of course.
Eventually I took it apart. The battery glue was so sticky, the battery started to distort as I tried to pry it away from the body of the phone. I figured at that point, it was pretty much destroyed. But I took it apart and used some alcohol to clean up some of the parts. At that point I just decided to order a new phone since I already had it for about 2 years anyway.
But now I want to get it working again to recovery some data and images.
I purchased a replacement battery, soaked the main board in alcohol, cleaned up some of the connectors, etc. Reassembled it, and to my surprise it worked again! Well, except the display. But the digitizer still worked, the capacitive buttons worked, and I could hear sound even. Seemingly everything worked but the display. I can even see the backlight come on sometimes but with no actual picture and some noticeable water marks. I was even able to fiddle around with the digitizer, unlock the phone, connect it via USB, and recover some of what I wanted. However, I was hoping to get the display working so I could recover additional data.
So I purchase a screen assembly (display, digitizer, and front body) off ebay. But same problem, I see the backlight come on sometimes, but no picture. I tried cleaning all the contacts again and re-seating them several times to ensure all connections were okay. Still, no picture on the display.
So I thought maybe I could have ended up with a bad display off eBay. So I ordered another. Still the same issue.
What could I do? Is there anything in particular I should try that might help? Is it the daughter board maybe? That might be easy enough to replace.
orificium said:
Around May 2016, I jumped into a pool with my OPO in my pocket. About 10 seconds afterwards I realized what I had done, and pull the phone out of my pocket. The screen wouldn't turn back on, and it started continuously buzzing. Eventually it stopped and I tried to dry it off best I could. Blowing out what water I could and stupidly purchased a bag of rice I kept it submerged in for awhile. Nothing worked of course.
Eventually I took it apart. The battery glue was so sticky, the battery started to distort as I tried to pry it away from the body of the phone. I figured at that point, it was pretty much destroyed. But I took it apart and used some alcohol to clean up some of the parts. At that point I just decided to order a new phone since I already had it for about 2 years anyway.
But now I want to get it working again to recovery some data and images.
I purchased a replacement battery, soaked the main board in alcohol, cleaned up some of the connectors, etc. Reassembled it, and to my surprise it worked again! Well, except the display. But the digitizer still worked, the capacitive buttons worked, and I could hear sound even. Seemingly everything worked but the display. I can even see the backlight come on sometimes but with no actual picture and some noticeable water marks. I was even able to fiddle around with the digitizer, unlock the phone, connect it via USB, and recover some of what I wanted. However, I was hoping to get the display working so I could recover additional data.
So I purchase a screen assembly (display, digitizer, and front body) off ebay. But same problem, I see the backlight come on sometimes, but no picture. I tried cleaning all the contacts again and re-seating them several times to ensure all connections were okay.
What could I do? Is there anything in particular I should try that might help? Is it the daughter board maybe? That might be easy enough to replace.
Click to expand...
Click to collapse
Since the whole thing involves water,there might be several parts which are damaged. I suggest get your device checked from a professional repair shop.
I was hoping I can learn more about what a professional repair shop might do to diagnose the problem.
orificium said:
I was hoping I can learn more about what a professional repair shop might do to diagnose the problem.
Click to expand...
Click to collapse
Do you have multimeter and knowledge of hardware?
Just toss it away after transferring the files.
It's not worth the hassle, trust me.
I repair OnePlus One's everyday and the water-damaged ones take way too much time.
Mr.Ak said:
Do you have multimeter and knowledge of hardware?
Click to expand...
Click to collapse
Yes, I do. I've done many laptop repairs and repaired a few smartphones in the past but never dealt with water damage like this before.
DevSquad said:
Just toss it away after transferring the files.
It's not worth the hassle, trust me.
I repair OnePlus One's everyday and the water-damaged ones take way too much time.
Click to expand...
Click to collapse
Do you have any advice as to what my next steps would be after having tried two replacement screens. Literally everything works on the phone except the screen doesn't light up. Even the digitizer works. Well I can see the backlight come on sometimes, but no pixels. I've cleaned an re-cleaned the connectors many times using 91% isopropyl alcohol.
Is there any particular resistance or continuity I can check that might indicate what component is bad? Information about the pinouts somewhere?
Maybe there's another part of XDA or another forum that goes more in-depth into smartphone repair? If anyone has any recommendations, I'd greatly appreciate it.