Database Info

Creation flashable zip sys-part CM10

Hi the crazy flash,
I open this topic for help creating a fix
CM10 ROM is Divided into 2 parts and some of the applications are installed on the / data partition due to Lack of space for full Jellybean installation.
Hence you will Have to reflash the rom you factory reset or Effective wipe / data partition.
Click to expand...
Click to collapse
After a restart install CM10 patch to system/app did not effect ?§!
Here is the solution I use busybox to inject App
I take this opportunity to fix some permission
If you have time of need flashable zip of this topic and for you!
Kernel or gapps or questions to ask permission
FixSysPartCM10
Code:
assert(getprop("ro.product.device") == "galaxysl" || getprop("ro.build.product") == "galaxysl" ||
getprop("ro.product.device") == "GT-I9003" || getprop("ro.build.product") == "GT-I9003");
ui_print(" ");
ui_print(" ********************************************** ");
ui_print(" * Fix reboot sys-parts/app by LoLaTiOn * ");
ui_print(" ********************************************** ");
show_progress(0.500000, 0);
mount("ext4", "EMMC", "/dev/block/stl9", "/system");
run_program("/sbin/busybox", "mount", "/dev/block/mmcblk0p3", "/data");
package_extract_dir("data", "/data");
symlink("/data/sys-parts/app","/system/app");
package_extract_dir("system", "/system");
set_perm_recursive(0, 0, 0755, 0644, "/system/framework");
set_perm_recursive(0, 0, 0755, 0644, "/data/app");
unmount("system");
run_program("/sbin/reboot");
instruction
Open zip with winrar
Add your app in \data\sys-parts\app
Create other folder in the system if time of need
Made you happy to share your patch and help the community
Enjoy...

my rom do not need this fix

Worked perfectly for me! Thanks

This is needed because CM10 with gapps does not fit our NAND aka ROM size.
Hence, the system apps are pushed into /data/sys-apps so that the entire ROM can work properly.. else full /system of jellybean does not fit on our small partition.

[Q] [Updater Script]Will This Updater Script Work ?

Hi , I want to make a kitkat custom rom so I downloaded a META-INF.zip ... When I edit the Script it Shows The Code
Code:
ui_print("Android KitKat ROM Update 4.4");
ui_print("Starting Installation");
mount("yaffs2", "MTD", "system", "/system");
ui_print("Mounted /system");
ui_print("Copying /system...");
package_extract_dir("system", "/system");
ui_print("Copied /system");
ui_print("Done! Enjoy Your New Android Update");
I Want to know that if I use this script would it be able to install the system folder(Custom Rom) on a phone......
Any help is Welcome....

[PROBLEM] Unable to flash self-made zip file

Device details:
YU Yuphoria YU5010
Software: CyanogenMod 12.1 (Nightly)
Root Access: Yes (By Default)
Bootloader: Unlocked
Recovery: TWRP v2.8.7.0
I made a simple flashable zip which I want to use for installing a different camera app in my device's /system partition. The app works. I've tried it by installing it the traditional way (apk). However I'm not able to flash the zip file. Whenever I try to flash it I get an error
Code:
E:Error executing updater binary in zip '/sdcard/cam.zip'
I researched on Google for that error and found many solutions from people facing the same problem. However all those solutions were only for this issue when faced while flashing a new custom ROM, not any other zip. So they were futile for me. Obviously I haven't been wiping anything before flashing my zip file.
My updater-script code:
Code:
ui_print("*********************************");
ui_print(" ");
ui_print("********** MIUI Camera **********");
ui_print("*** By Tanmay Vij ***";
ui_print("**********************************");
ui_print("Mounting System...");
run_program(
"/sbin/busybox",
"mount",
"/system"
);
ui_print("Installing Camera...");
package_extract_dir(
"system",
"/system"
);
ui_print("Fixing Permissions...");
set_perm(0, 0, 0644, "/system/app/Redmi1s_MIUICamera.apk");
ui_print("Unmounting System...");
run_program(
"/sbin/busybox",
"umount",
"/system"
);
ui_print("MIUI Camera successfully installed!");
I wonder whether this is gonna happen with me only in TWRP or in other recoveries as well (can't test in CWM as it is not supported for my device). Please correct if any errors in the script..
P.S. I took the update-binary from some random flashable zip as I've heard that it's the same for any zip file..

Lineage-15.1 For Lyf Water 8 (LS-5015)mobee01a

LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer:
Code:
* Your warranty is void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
For LYF Water 8 mobee01a
-INSTALLATION INSTRUCTIONS-
- Download the latest build
- Download OpenGapps ( Arm64 8.1 Pico/Nano/Other)
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using TWRP
- Flash Gapps
- Reboot.
- Enjoy!
Working:
Camera (Use Footej Camera)
VoLTE
RIL
Sound
Video
Sensors
-
Downloads:
ROM : https://drive.google.com/open?id=1GCo2g_H_xANaYP8mCjsaeCbejWzIWZM0
XDAevDB Information
Lineage-15.1, ROM for the *LYF Water 8*
Contributors
*Mohd Faraz (AndroiableDroid)*
Prashant Thakur for testing this build-Thanks
Ashley David(XDA) for Testing my Build - Thanks
Very Very Special Thanks to Varun Pilankar (XDA) for MM Kernel Sources
Source Code: https://github.com/DotOS
Kernel Source:: https://github.com/LS-5015-G42-Dev-T...el_LYF_LS-5015
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Must be on Latest Firmware
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-05-23
Created 2018-05-23
Last Updated 2018-05-23

Thanks for making this device lively. Would flash and come back with reviews.

The update-script didn't work for me.
I had to change the update-script to get it working.
Here is the modified update-script:
ui_print("Target: LYF/LS-5015/LS-5015:6.0.1/MMB29M/434:user/release-keys");
ifelse(is_mounted("/system"), unmount("/system"));
package_extract_dir("install", "/tmp/install");
set_metadata_recursive("/tmp/install", "uid", 0, "gid", 0, "dmode", 0755, "fmode", 0644);
set_metadata_recursive("/tmp/install/bin", "uid", 0, "gid", 0, "dmode", 0755, "fmode", 0755);
mount("ext4", "EMMC", "/dev/block/bootdevice/by-name/system", "/system", "");
run_program("/tmp/install/bin/backuptool.sh", "backup");
unmount("/system");
show_progress(0.750000, 0);
ui_print("Patching system image unconditionally...");
block_image_update("/dev/block/bootdevice/by-name/system", package_extract_file("system.transfer.list"), "system.new.dat.br", "system.patch.dat") ||
abort("E1001: Failed to update system image.");
show_progress(0.020000, 10);
mount("ext4", "EMMC", "/dev/block/bootdevice/by-name/system", "/system", "");
run_program("/tmp/install/bin/backuptool.sh", "restore");
unmount("/system");
show_progress(0.050000, 5);
package_extract_file("boot.img", "/dev/block/bootdevice/by-name/boot");
show_progress(0.200000, 10);
set_progress(1.000000);

Problem of flashing
Error 7 shows
failed to mount /dev/block/platform/soc.0/7824900.sdhci/by-name/system at /system

failed to mount /dev/block/platform/soc.0/7824900.sdhci/by-name/system at /system

Sim Card Not Working on PIXEL EXPERIENCE PIE..!
@Inderpreets Hey Inderpreet, Sim Card is not working on your latest pixel experience pie build..!! Is There any solution for that?? I really appreciate your hard work and dedication..! Thanks for providing such a great rom for this device.. !! Please see to that..!!

HELP!!! How to fix "Can’t load Android System your data may be corrupt" error without losing your data ?

Kindly find the updated post here
Hello guys,I was uninstalling some apps and accidently Asus launcher,Google Play and Play services etc got selected as well.While apps were getting uninstalled and downgraded,phone restarted somehow and everything is screwed up now.I am stuck on a screen telling “Can’t load Android System.Your data may be corrupt.If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device” with 2 options underneath, 1.Try again and 2.Factory data reset
When I select “Try again” it shows “ Dead android robot on his back and red triangle” for a split second and then goes to Asus logo screen for 5 seconds and then ask for encryption key, when I enter the key it goes to ASUS logo screen again for 30-40 seconds and again back to Error screen.
Asus ZenFone 3 ZE552KL
ROM : Stock Oreo Version WW-15.0410.1807.75
Bootloader is Locked
Recovery : Stock Recovery
USB debugging : Disabled
Android device encryption is ON
I don’t wanna to lose my data coz there are some very important documents,projects reports, pictures and backups in it.
Device is booting in Fastboot Mode and Recovery Mode.
It even boots to the Sideload Mode via recovery and running "adb devices" command shows it attached with it's serial number and sideload but other commands don't work ( probably coz USB debugging is disabled ? )
Device is being shown /listed in Fastboot Mode.
I am unable to use adb as USB debugging is disabled.Running "adb devices " command shows device’s serial number and "recovery" written next to it ,in the command prompt.
Will flashing Version WW-15.0410.1807.75 again do the job without wiping user data ? Just like “userdata” partition is not normally touched by the OTA update process ?
How about flashing only boot.img / system.img ?Can we resolve the issue by just flashing just system.img or boot.img instead of flashing complete stock ROM ?
I don't care about performance of the system or unpredicted issues later on,my entire focus is on preserving my data.
Any help would be greatly appreciated!
I extracted the Stock ROM zip and found it's updater script in "META-INF/com/google/android"
JavaScript:
ifelse( getprop("ro.build.id") == "OPR1.170623.026", ui_print("Android O device"), (
(greater_than_int(getprop("ro.build.date.utc"), 1514390400)) || abort("Can't install this package on device version less than 14.2020.1712.85 device build time (" + getprop("ro.build.date") + ").");
) );
ifelse( getprop("ro.product.name") == "OPEN_Phone", ui_print("OPEN SKU device"), (
getprop("ro.product.name") == "WW_Phone" || abort("This package is for \"WW_Phone\" devices; this is a \"" + getprop("ro.product.name") + "\".");
) );
ui_print("Target: asus/WW_Phone/ASUS_Z012D:8.0.0/OPR1.170623.026/15.0410.1807.75-0:user/release-keys");
show_progress(0.750000, 540);
ui_print("Patching system image unconditionally...");
block_image_update("/dev/block/bootdevice/by-name/system", package_extract_file("system.transfer.list"), "system.new.dat", "system.patch.dat") ||
abort("E1001: Failed to update system image.");
ui_print("Verifying the updated system image...");
if range_sha1("/dev/block/bootdevice/by-name/system", "136,0,32767,32768,32770,33009,33011,33516,65535,65536,65538,66043,98303,98304,98306,98545,98547,99052,131071,131072,131074,131579,163839,163840,163842,164081,164083,164588,196607,196608,196610,197115,229375,229376,229378,229617,229619,230124,262143,262144,262146,262651,294910,294912,294914,295153,295155,295660,327679,327680,327682,328187,335068,360448,360450,360955,393214,393216,393218,393723,393724,393725,425982,425984,425986,426491,458751,458752,458754,459259,491519,491520,491522,492027,524287,524288,524290,524795,557055,557056,557058,557563,589823,589824,589826,590331,622591,622592,622594,623099,655358,655360,655362,655867,688126,688128,688130,688635,720894,720896,720898,721403,753662,753664,753666,754171,786430,786432,786434,786939,819198,819200,819202,819441,819443,819948,851966,851968,851970,852475,884734,884736,884738,884977,884979,885484,917502,917504,917506,918011,950270,950272,950274,950779,967696,967697,983040") == "9a4740126249131da4ccd7e39fcf8d7302a3f818" then
if range_sha1("/dev/block/bootdevice/by-name/system", "136,32767,32768,32770,33009,33011,33516,65535,65536,65538,66043,98303,98304,98306,98545,98547,99052,131071,131072,131074,131579,163839,163840,163842,164081,164083,164588,196607,196608,196610,197115,229375,229376,229378,229617,229619,230124,262143,262144,262146,262651,294910,294912,294914,295153,295155,295660,327679,327680,327682,328187,335068,335580,359936,360448,360450,360955,393214,393216,393218,393723,393724,393725,425982,425984,425986,426491,458751,458752,458754,459259,491519,491520,491522,492027,524287,524288,524290,524795,557055,557056,557058,557563,589823,589824,589826,590331,622591,622592,622594,623099,655358,655360,655362,655867,688126,688128,688130,688635,720894,720896,720898,721403,753662,753664,753666,754171,786430,786432,786434,786939,819198,819200,819202,819441,819443,819948,851966,851968,851970,852475,884734,884736,884738,884977,884979,885484,917502,917504,917506,918011,950270,950272,950274,950779,967696,967697") == "6d1cea242bbacf2ea86f62fa6c06b6bde31ec430" then
ui_print("Verified the updated system image.");
else
abort("E1003: system partition has unexpected non-zero contents after OTA update");
endif;
else
abort("E1002: system partition has unexpected contents after OTA update");
endif;
show_progress(0.050000, 5);
package_extract_file("boot.img", "/dev/block/bootdevice/by-name/boot");
show_progress(0.200000, 10);
# ---- radio update tasks ----
ui_print("Patching firmware images...");
ifelse(msm.boot_update("main"), (
ui_print("installing cmnlib64");
package_extract_s_file("firmware-update/cmnlib64.mbn", "/dev/block/bootdevice/by-name/cmnlib64");
ui_print("installing sbl1");
package_extract_s_file("firmware-update/sbl1.mbn", "/dev/block/bootdevice/by-name/sbl1");
ui_print("installing cmnlib");
package_extract_s_file("firmware-update/cmnlib.mbn", "/dev/block/bootdevice/by-name/cmnlib");
ui_print("installing rpm");
package_extract_s_file("firmware-update/rpm.mbn", "/dev/block/bootdevice/by-name/rpm");
ui_print("installing tz");
package_extract_s_file("firmware-update/tz.mbn", "/dev/block/bootdevice/by-name/tz");
ui_print("installing devcfg");
package_extract_s_file("firmware-update/devcfg.mbn", "/dev/block/bootdevice/by-name/devcfg");
ui_print("installing aboot");
package_extract_s_file("firmware-update/emmc_appsboot.mbn", "/dev/block/bootdevice/by-name/aboot");
ui_print("installing lksecapp");
package_extract_s_file("firmware-update/lksecapp.mbn", "/dev/block/bootdevice/by-name/lksecapp");
ui_print("installing keymaster");
package_extract_s_file("firmware-update/keymaster.mbn", "/dev/block/bootdevice/by-name/keymaster");
), "");
ifelse(msm.boot_update("backup"), (
ui_print("installing cmnlib64bak");
package_extract_s_file("firmware-update/cmnlib64.mbn", "/dev/block/bootdevice/by-name/cmnlib64bak");
ui_print("installing sbl1bak");
package_extract_s_file("firmware-update/sbl1.mbn", "/dev/block/bootdevice/by-name/sbl1bak");
ui_print("installing cmnlibbak");
package_extract_s_file("firmware-update/cmnlib.mbn", "/dev/block/bootdevice/by-name/cmnlibbak");
ui_print("installing rpmbak");
package_extract_s_file("firmware-update/rpm.mbn", "/dev/block/bootdevice/by-name/rpmbak");
ui_print("installing tzbak");
package_extract_s_file("firmware-update/tz.mbn", "/dev/block/bootdevice/by-name/tzbak");
ui_print("installing devcfgbak");
package_extract_s_file("firmware-update/devcfg.mbn", "/dev/block/bootdevice/by-name/devcfgbak");
ui_print("installing abootbak");
package_extract_s_file("firmware-update/emmc_appsboot.mbn", "/dev/block/bootdevice/by-name/abootbak");
ui_print("installing lksecappbak");
package_extract_s_file("firmware-update/lksecapp.mbn", "/dev/block/bootdevice/by-name/lksecappbak");
ui_print("installing keymasterbak");
package_extract_s_file("firmware-update/keymaster.mbn", "/dev/block/bootdevice/by-name/keymasterbak");
),"no backup partition");
msm.boot_update("finalize");
ui_print("installing modem");
package_extract_s_file("firmware-update/NON-HLOS.bin", "/dev/block/bootdevice/by-name/modem");
ui_print("installing dsp");
package_extract_s_file("firmware-update/adspso.bin", "/dev/block/bootdevice/by-name/dsp");
ui_print("installing asusfw");
package_extract_file("firmware-update/asusfw.img", "/dev/block/bootdevice/by-name/asusfw");
set_progress(1.000000);