[Completed] QHSUSB_Bulk drivers needed - XDA Assist

I recently bricked my LG G2 phone, no download mode, no recovery mode and nothing else can be seen on screen whereas my winows 10 detects the device QHSUSB_Bulk without any supported drivers. I need QHSUSB_Bulk drivers for windows 10 so that i could restore my phone. Thanks

asad.mpr said:
I recently bricked my LG G2 phone, no download mode, no recovery mode and nothing else can be seen on screen whereas my winows 10 detects the device QHSUSB_Bulk without any supported drivers. I need QHSUSB_Bulk drivers for windows 10 so that i could restore my phone. Thanks
Click to expand...
Click to collapse
Hi asad.mpr
Thank you for using XDA Assist
Using your error message onto XDA Search engine, I was able to find the below successful report of un-bricking a LG G2.
[REPAIRED!]LG G2 F320K deep&hard brick! REPAIRED now.
If any further questions remains, our experts at the below forum should be able to help you. Please be welcome to post over in there.
G2 Q&A, Help & Troubleshooting
Nice regards and good luck.
.

Related

[Completed] What can I do if bricked my phone?

Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
XDA Visitor said:
Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
Click to expand...
Click to collapse
Fortunately there are many unbrick guides for your device, e.g.:
Unbrick your LG G2 D802 - Back to stock by flash kdz by Ceovip
LG G2-D802 Unbrick Device by g0dsend313 (mlm1102003) by mlm1102003
[GUIDE] Hard Brick Recovery LG G2 by etm34
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2 by Partager.info
[FIX] Bricked LG G2 D800/1/2/3 FlashTool Fail Fix Download Mode Only by MK45A
If nothing helps, please register on xda and ask in the [HELP THREAD][Noob Friendly] LG G2 Ask any question by XxZombiePikachu.
There are many experienced users having the same device like you ... so best place to get proper help and advices.
Good luck !
Thread closed. Thank you!

[Completed] SOFT BRICK LGP500 unable to connect to pc due to usb port problem

Due to removal of some system files the phone shows "sorry Google not working......sorry browser not working.....nd so on" even after factory resetting. Android. Os is 2.3.3 gingerbread. The mobile is not connecting to pc using usb cord due to its port problem. No clockwork recovery is installed its just rooted and bricked (phone repairer is unable to connect the phone to pc). Please suggest any solution.
Hello and welcome to XDA Assist.
Please post your question (by clicking here) in the LG Optimus One, P500, V Q&A, Help & Troubleshooting section
There are many qualified users in that section that should be able to help you.
Good luck!

[Completed] HELP!! Bricked LG Optimus Exceed 2

my lg exceed 2 is bricked by installing twrp.. no power, no recovery, no download mode.. i finally got computer to see phone as qualcomm hs-usb QDLoader 9008 (com4). i also got software QFIL to see phone in Download Mode but cant seem to to get it to repair and ESF Professional Qualcomm NV Tools to see phone in Online Mode but can not repair im not fimilar with these two software's so that might be a reason.. With QFIL i have problem with Programmer Hex saraha but does see phone in Download Mode. With QualComm NV Tools it detects phone in OnLine Mode and Mobile Model ID as "FFA/SURF 7630 (NAND)" and SPC is rejected by phone.. i can change phone modes with Qualcomm NV tools if that can help.. LGFlashTool and BoardDiag 3.99 does not see phone.. can someone please help me its going on a month bricked and phone still has service.. i did root phone with kingroot before installing twrp which bricked my phone. Also phone does disconnect and reconnect to pc every so often..
Hello and thank you for using XDA Assist,
please ask you question in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist

[Completed] Possibly hard-bricked LG lge-465f phone - download mode only

Hello!
I recently came upon a (quite old) LG phone, model LG lge-465f. It was suffering from Security Error loop. I charged the battery using an external charger, downloaded LG Mobile Support Tool, installed the drivers on my Windows 7 x64, connected the phone in Download Mode (couldn't get it in Emergency Mode for the life of me), the software recognised the phone, so I did the Software Update. It downloaded the firmware, extracted it, but got stuck at 5%, saying I needed to unplug and plug it back. Did it a few times, until the program crashed. Tried some more times, changed to a Windows XP x32 station, but to no avail.
So I downloaded a .kdz from a stock ROM site I trust and tried to use the LG Flash Tool 2014. No luck. Still got stuck at 5% and crashed. If I tried to click on Get Phone Information, the program crashed.
Then I tried KDZ_FW_UPD. Selected the phone mode to DIAG, selected my KDZ, but got ERROR PHONE NOT FOUND. I tried to change the COM port to COM41, did the flashing again, still stuck at the same error.
Problem is, the phone now seems to be even worse. I can't turn it on, only get it to download mode. Now I can't even see the Security Error... Is the phone totally gone?
Thanks for any help!
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Best regards & good luck
Trafalgar Square
XDA Assist

[Completed] My LG E460 Bricked! Need some help!

Hey there,
I've been trying to flash stock rom on my LG E460 because It doesn't boot, I get bootloop everytime I try to turn it on, and I can't access recovery either (It says 'Security Error'), so I tried LG Mobile Support Tool, but I get 'Upgrade failed due to an error' when it reaches 5%.
I tried LG Flash Tool 2014 latest version and when It comes the upgrading moment I have the same error, It says my phone is not connected to PC and it is connected (LG AndroidNet Phone).
I turn it off and replace the battery and nothing, it still doesn't work.
I can only get in 'Download Mode', and I tried everything, I really need some help here, I don't know what to do.
I have the right usb driver and kdz file, however I tried another kdz and same problem.
By the way my OS is Win 10, I tried on win 7 and same thing.
I saw posts that had the same problem, but nothing works for me.
Please help
Hello and thank you for using XDA Assist,
please ask your question here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

Categories

Resources