Good afternoon all if anyone could please help I'd greatly appreciate it!
So I just bought a Sprint Galaxy S5 from ebay with the assumption that with some customizing I'd be able to get the phone domestically unlocked. I got the phone and it was already updated to 5.0 Lollipop so I followed this tutorial to get the SSU.apk to actually work
http://forum.xda-developers.com/spr...locking-sprint-galaxy-s5-g900p-t3085624/page2
After a lot of time I was successful at rooting the phone and was able to downgrade to 4.4.4 but the tutorial calls for 4.4.2 but it seems that 4.4.4 was the only fw that would successfully install.
But now here's the problem I was able to obtain the domestic unlock code through Sprint but now the activation/update app doesn't work and doesn't open automatically the way that the reps said it would,. I've tried to reset stock through Kies but Kies doesn't recognize the phone. I've also tried to use Odin through out this process not only to reset back to stock but also downgrade the fw and the modem. The really annoying part is that small PDA/AP updates and installs work fine but when I try to Odin the original tars it always fails 100% getting a "sw rev check fail aboot fused 2 binary 1 " error on my phone.
I really don't know what to do at this point, and it seems the error is associated with a soft brick but the device still powers on and boots.
I thought this would be a pretty straight forward process but I've hit the wall and am losing my mind, I need help!
P.s. I flashed 4.4.4 fw with CWM and the device is still rooted
Thanks
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Dude, try to kill him completly ( nothing on screen ) then send him to warranty, you got nothing to lose.
NeoDJW said:
Dude, try to kill him completly ( nothing on screen ) then send him to warranty, you got nothing to lose.
Click to expand...
Click to collapse
It's not possible since I bought it second hand.
Even if I had a warranty, in my country (Serbia) warranty for smartphones doesn't mean much, I think I could write PhD thesis easier than to make seller replace/fix smartphone with warranty
mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
Maybe you can find the solution here:
http://androidforums.com/threads/custom-binary-block-by-frp-lock.977734/
Erik1805 said:
Maybe you can find the solution here:
http://androidforums.com/threads/custom-binary-block-by-frp-lock.977734/
Click to expand...
Click to collapse
Thanks but this will not fix my problem.
Have you tried this: http://pangu.in/frp.error.html
Bright.Light said:
Have you tried this: http://pangu.in/frp.error.html
Click to expand...
Click to collapse
No I didn't but the fact is it will not work.
There is currently no way to fix that. The only way would be to unlock FRP by some box, but it isn't released yet.
What I am asking here is true that Galaxy S7 could be hard bricked that easy? By steps I wrote in my first post.
My questions are partially answered in this article
But I still don't understand what's the problem with dm-variety if I flashed stock rom?
Is there are any other parts of the NAND that are not original/signed and that's why dm-verity fails?
If that's the case can they be backed up then reflashed with the Odin if I get into same problem with new phone?
Thanks
@mss1988 Even if you get message as locked because of FRP, just use Smart switch with Emergency recovery mode and you will get the device back to its original state. This works even if the device is rooted or Twrp'd
harshang2007 said:
@mss1988 Even if you get message as locked because of FRP, just use Smart switch with Emergency recovery mode and you will get the device back to its original state. This works even if the device is rooted or Twrp'd
Click to expand...
Click to collapse
Thanks, but Smart Switch Emergency Recovery is basically the same thing as Kies Firmware update. Which I already tried and that didn't fixed my problem.
mss1988 said:
Thanks, but Smart Switch Emergency Recovery is basically the same thing as Kies Firmware update. Which I already tried and that didn't fixed my problem.
Click to expand...
Click to collapse
@mss1988 I have personally faced this issue on Samsung J7 and J5 and later I had to use Smart Switch's Emergency recovery functionality by enter my Serial number and Device Model Number and Successfully finished flashing the stock ROM. Yes, This works.
harshang2007 said:
@mss1988 I have personally faced this issue on Samsung J7 and J5 and later I had to use Smart Switch's Emergency recovery functionality by enter my Serial number and Device Model Number and Successfully finished flashing the stock ROM. Yes, This works.
Click to expand...
Click to collapse
I don't have the phone anymore to confirm or to deny this. But the whole procedure in Kies and Smart Switch is the same. There are other people with the same problem too in this thread too, and they still didn't found the way to unbrick their devices.
mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
I went through this procedure: http://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516 which gives a link to downloading the factory binary (of either version). It reinstated my IMEI which had been turned to a string of zeroes. I will say that when you reboot after flashing the factory binary it's pretty different looking so be prepared for that. I then went to Sammobile and downloaded the appropriate stock ROM for my s7 and flashed that with Odin. I flashed TWRP, formatted internal data when given the opportunity, flashed the no-verity-opt-encrypt.zip, and I was able to use my s7 again. At any rate, you might follow the guide at the link I gave you and see if it helps. As always, no guarantee is given or implied. It's just what I did.
Thanks man, but I can't flash the Factory binary, my FRP is unfortunately ON.
E pa brate nemoj se više onda igrati sa telefonom, nije to za svakoga,...
Mod Edit: Please post in English only:
Well, the brothers do not come then play with the phone, it's not for everyone
now phone detect usb ? i mean adb devices
mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
wild guess....
Install dm-verity and force encryption disabler
Wipe Cache
install custom kernel
chandarakk said:
now phone detect usb ? i mean adb devices
Click to expand...
Click to collapse
There's no adb/fastboot access from Samsung recovery or Samsung download mode, as far as I know.
Just get your phone into downloadmode and then flash the stock firmware witch you can find on sammobile. I got also this problem, and then everything will be fine ?
did you try use Kies or Smart swticher to factory restore the phone ?
because as far as i know , even FRP is on , you can still flash stock firmware.
and , try local shop to find any place have z3x box or Octopus box .
Hey guys firstly i want to apologize if i'm on the wrong forum.
I have screwed up and i hope you guys could help.
I have a Samsung S6 that worked perfectly, but i wanted to sell it and buy an S7 and so i have done a "hard" factory reset by pushing Vol up, Home, Power buttons. Turns out i had to do a "soft" factory reset first.
Now when i tried to sell my phone with all parts and documents i have failed!
It turns out that the phone asks for my Samsung ID but obviously i can't remember an ID that i have created more than a year ago that was of no use to me!
I think i still have warranty but that is my last option for something like this, i have not rooted this device it runs on marshmallow.
What can i do to fix it myself?
I haven't tried flashing it with a stock rom simply because i fear that that will trigger KNOX, even though i'm desperate to fix this, i haven't crossed that border of despair.
Guys please help, i'm counting on your replies.
Thank you.
Flashing a stock rom that was made for your phone will NOT trigger knox. You can use samfirm and odin to do it
ankushkatari said:
Flashing a stock rom that was made for your phone will NOT trigger knox. You can use samfirm and odin to do it
Click to expand...
Click to collapse
Thanks for your reply, do you mean from sammobile? Also i do not remember what version if marshmallow i was running, is there a way for me to figure it out now?
Okay i figured out what version of marshmallow i was running simply because i had put updates on automatic so it must be the last 6.0.1
However i do not know anything about samfirm i have used odin before on my s4 like 3 years ago, and i only used it to root my s4.
Could anyone please help me out?
Btw, if i successfully put a stock firmware on it throigh samfirm and odin, will it remove my email? Or is it omly worth a try?
Are you certain that it will not trigger knox?
Okay i tried flashing the same firmware unto my devicd but it seems that i can't flash anything because Reactivation Lock is enabled.
I didn't enable it (at least i don't remember) mayve the marshmallow update enabled Reactivation Lock?
I'm almost at the point of throwing my phone into a wall, it's getting close.
Did you figure it out. I'm in the same boat with my S6 edge
So i think i have completely ****ed up, hopefully you guys can give me some insight
I was on the process of properly rooting a samsung s7 that i got since the root checker said that it was not properly root.
i decide to fallow this guide
https://forum.xda-developers.com/ve...ot-guide-verizon-s7-s7-edge-sm-g930v-t3411015
But i after flashing the ENG using Odin
the phone just keep restarting, over and over, it also does the samething in recovery mode.
Notes:
The phone was displaying Custom unlock login screen (Before Flash)
Also it was 6.0.1 update
and I got the the 7.0 update, to flash the ENG
If there is anything you guys can advice, ill appreciate.
If it can go in downloading mode you can flash stock firmware and try rooting again.
I have been trying for about a month to root and atleast boot this SM-G920V to a rom I dont even care if it's rooted but anytime i try to follow a youtube video exactly it still ends up failing i have used adb to boot to bootloader then turned off phone booted into download mode to bypass the secure download but it still says SECURE CHECK FAIL : (RECOVERY) I don't quite understand why Verizon just has to be so difficult but this may be a dumb question is there anyway to actually switch the model of this phone without just changing that file that displays it to thus switch it to a root compatible version or will changing that actually make the phone compatible I don't know if anyone has any tips as to booting this verizon galaxy s6 nougat 7 to a custom rom or even rooting though I was told that the verizon models are incompatible for unlocking bootloader but I know theres ways of booting to roms without unlocking bootloader though you need root is there anyone that doesnt need root or unlocking bootloader I have also tryed the old ping pong method and that still failed. please let me know if you have any knowledge of any of this thank you in advance
No way for custom rom.
Flash the latest official, install Package Disabler app and get rid of the bloatware.
Then enjoy the phone.