Help with logo.bin - Moto G Q&A, Help & Troubleshooting

Hello. So I've restored my old XT1032 to 5.1 stock and locked the bootloader again but I'm still getting the unlocked bootloader warning message when booting. I've tried to reflash the logo.bin but that didn't work.
Any ideas?
Thanks

flash the logo.bin from here:
http://forum.xda-developers.com/showthread.php?t=2548530
and then it will go away. Motorola did this beacuse the bootloader was unlocked before and relock it doesn't bring back the original boot logo. In bootloader mode you can see that you have now STATUS CODE: 2 instead of 0 when never was unlocked.

Related

Locked bootloader / but fastboot is working?? Not flashing recovery though

OTA softbricked? the device of my friend
Although the bootloader is unlocked, I was able to flash new firmware with fastboot with succes!! The device is now booting 4.1.1 (10.4.2.20)again
So, I tried to flash TWRP through fastboot (it's still responding to fastboot), but that fails:
Code:
FAILED <remote: <InvalidState>>
Thinking it is because the bootloader is locked, installed unlocking tool. Run it, at the last step, where you have to click the -normally- bar with image of locked lock to unlock, I get the dreaded network error, more importantly: the lock image is UNlocked
What could be the case now?
n/m http://forum.xda-developers.com/showthread.php?t=2037266
fastboot is available, flashing is not

Motorola Moto G - Flashing stock failing with fastboot

Hello everyone
I am new here.
I need some assistance with my moto g.
I previously unlocked my Moto G's bootloader but realised that I just wanted it on stock and locked so I didn't damage it, so I managed to relock my
phone's bootloader and got it back to a stock rom.
After installing a system update a few days ago, my phone came back with the
"Warning - bootloader unlocked!" logo after installing a system update.
So I decided to try and reflash the stock firmware and original logo.bin from the XDA Site.
However, my flashes are failing and my moto g is stuck in a bootloop with no rom to boot up to, I have adb minimal fastboot and motorola drivers
/ adb drivers installed.
What happens: I power on the phone into bootloader mode, then I try to flash the ROM I got from droid-developers site, but whenever I try to relock
my bootloader it shows the following:
...
Ready to flash signed images!
OK: (time)
I do fastboot flash partition gpt.bin and I get:
Preflash validation failed!
SST lock failure!
Also trying to issue the command to relock the bootloader gives me
SST lock failure!
I get other errors too when flashing the sparsechunk images, it gives: Invalid PIV signed image! and for motoboot and boot images it gives: Preflash validation failed!
version downgraded for boot.
etc
I cannot recover my stock rom due to these errors, I've searched everywhere (on google) and here and I am desperate to flash the stock rom back and relock bootloader again so I can use the phone.
I am really stuck and my phone will not get out of a bootloop
Any help is really much appreciated as I need to get my phone working so I can use it
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219​
lost101 said:
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219​
Click to expand...
Click to collapse
I followed the tutorial, but when I get to the flashing stage, I get:
Preflash validation failed,
SST lock failure!
And version downraded for gpt.bin
it seems to be failing to flash these files.
What do I need to do?
You need to provide more information for people to help you. Have you upgraded to 4.4.4?
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
GrammarNazi said:
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
Click to expand...
Click to collapse
But did you downgrade from 4.4.4 to 4.4.2?
What model do you have?
Can you explain us all the steps?
Thanks
First unlock your bootloader again. You have to downgrade from 4.4.4 to 4.4.3 then to 4.4.2. During the downgrades you have to follow the same kind of firmware (example: 4.4.4 retail EU -> 4.4.3 retail EU -> 4.4.2 retail EU). When you're done if you want you can relock the bootloader.

Help Needed: Unbricking Moto G 4G (Peregrine XT1039 )

Hi
I have soft-bricked my Moto G 4G, as the title says. I decided to use the nandroid backup from my working Moto G 4G & flashed it to the one which has now since bricked. (kinda lazy XD)
Its also locked too -_- So i can flash signed motorolla img's but unsigned do not work. I have tried to find official 4.4.4 images but I've had no luck in flashing them. So now i get constant error messages when trying to flash the same system images, or boot.img to the system.
I have access to Fastboot & only Fastboot. The issues i have are:
When booting into fasboot i get:
Fastboot Reason: UTAG "bootmode" configured as fastboot.
When trying to unlock the bootloader, however i can get the unlock token by doing "fastboot oem get_unlock_data then paste that on the motorolla site.
But as soon as i type in fastboot oem unlock i get the following message:
fastboot <bootloader> oem unlock disabled!
I also get:
Invalid PIV signed system image
hab check failed for system
I can flash the following successfully:
gpt.bin
motoboot.img
logo logo.bin
fsg.mbn
NON-HLOS.bin
Because I've flashed the other system's rom to this phone, ALL the information under "Barcodes" is identical to that of my working phone. Even the fastboot code thats identical too. So even when i request a unlock token, sure it works, but the site thinks that its a call from my working phone so it gives out the incorrect unlock code, so thats why i think the unlock is disabled. Either way this is a really irritating situation, which i am having trouble trying to solve.
I wonder if I'm going to have to flash a blank flash to get it back to working state.
Hopefully if i can get the bootloader unlocked, id be back in business. :fingers-crossed:
Any help would be greatly appreciated.
Thanks

How to restore the encrypted bootloader?

hi guys, i've unlocked the bootloader with the dc-unlocker2client , And i want to go back to the original boot loader, i've tried to re flash the 137 and eve the 129 chinese rom but the annoying message on boot startup still exist..
so how to go back?
youre mixing up two things: the bootloader and the boot image
the former (bootloader) you unlock via fastboot and the unlock code that you read out via dc-unlocker. this is the reason why u receive the message at bootup and u can relock the bootloader via fastboot as well (fastboot oem relock XXXXXXXXX)
the latter is the boot image that u have to decrypt in order to be able to root properly and not be stuck in a boot loop. the boot.img is reflashed once u install a new stock firmware. but the bootloader lock state is untouched by this, thats why u manually have to relock it using fastboot!
cheers
thats weird.. i entered the fastboot mode
and opened the minimal adb - and wrote the command : fastboot oem relock XXXXXXXXX
the XXXX is my unlock code from the dc software i guess..
and its says : failed : stat not match
so.. how can i lock it again?
http://postimg.org/image/50dz3y0vf/
U should flash stock recovery first...then relock your bootloader

Bootloop help

My moto g lte xt1045 has been stuck in a boot loop. It is not rooted and the bootloader is locked. When i go to the boot menu anything i select sends me back to the bootloop besides barcode. How can i fix this?
Fastboot flash the stock firmware of your phone .
Do "fastboot getvar all"
Is your IMEI empty?

Categories

Resources