I was stuck at bootloop after the CM13 OTA update. i do not have bootloader unlocked.So inorder to unlock the bootloader without losing data i followed the steps as said in the following link
http://forum.xda-developers.com/oneplus-one/general/how-to-unlock-bootloader-losing-data-t3237267
Installed the Qualcomm drivers and started the application . it showed my phone as Com ,i started the process it got completed with green tick. I booted my phone but no life on oneplus one. I am unable to get in to recovery,fastboot and even switch on it. Please help me.
Thanks :crying:
here is the log details after using msm tool
8974_msimage.mbn: OK
dynamic_nvbk.bin: OK
emmc_appsboot.mbn: OK
gpt_backup0.bin: OK
gpt_backup0_64G.bin: OK
gpt_main0.bin: OK
gpt_main0_64G.bin: OK
userdata.img: FAILED
userdata_64G.img: FAILED
rawprogram0.xml: OK
rawprogram0_64G.xml: OK
NON-HLOS.bin: OK
MPRG8974.mbn: OK
rpm.mbn: OK
sbl1.mbn: OK
sdi.mbn: OK
static_nvbk.bin: OK
tz.mbn: OK
boot.img: FAILED
cache.img: OK
persist.img: FAILED
recovery.img: FAILED
Dont give up if you can get into fastboot then you have a shot , have you tried adb?
Sent from my A0001 using XDA-Developers mobile app
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Fixed my OPO following this guide this morning, having the same issues!
Related
Hey my friends,
now phone is bricked i have tried to flash a bin over flashtool but its aborted because an error.
So now i think i go back to the S/W mode and bring the orginal kdz back to the phone.
So but wait there is no S/W mode ! . I started the phone in Fastboot and have to flash the recovery.img back to phone.
and i see "Failed Partition does no exist" oO ok try to create a new partition. Fastboot oem part-add ..... Failed remote failure
and now ? what i have to do , i can´t do anything more ....................
MasterTobi said:
Hey my friends,
now phone is bricked i have tried to flash a bin over flashtool but its aborted because an error.
So now i think i go back to the S/W mode and bring the orginal kdz back to the phone.
So but wait there is no S/W mode ! . I started the phone in Fastboot and have to flash the recovery.img back to phone.
and i see "Failed Partition does no exist" oO ok try to create a new partition. Fastboot oem part-add ..... Failed remote failure
and now ? what i have to do , i can´t do anything more ....................
Click to expand...
Click to collapse
Follow this guide to unbrick your phone, it worked for me !
http://forum.xda-developers.com/showthread.php?t=2246001
ah damn this was it i forgot how can i come back to sw with omap
hold the vol up button permanetly
THX BRO
Don't forget to press the THANKS button
Hi
i bricked my asus tf300t when i was try format all data from TWRP 2.8... but its fail when i reboot, when its pass could get into recovery but when trying to format the partitions had damaged, now leaves me no longer enter into the recovery and i was try via fastboot with this results following this threat. http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 when i erase cache fastboot failed , in tablet nothing happened
please help me
thx
Kikurimatsu said:
Hi
i bricked my asus tf300t when i was try format all data from TWRP 2.8... but its fail when i reboot, when its pass could get into recovery but when trying to format the partitions had damaged, now leaves me no longer enter into the recovery and i was try via fastboot with this results following this threat. http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 when i erase cache fastboot failed , in tablet nothing happened
please help me
thx
Click to expand...
Click to collapse
The first failed command in fastboot shuts fastboot down ...
If you get an error you will have to reboot back into fastboot before issuing a new command ....
That said .... Try a different USB port ...
Thx Josh
lj50036 said:
The first failed command in fastboot shuts fastboot down ...
If you get an error you will have to reboot back into fastboot before issuing a new command ....
That said .... Try a different USB port ...
Thx Josh
Click to expand...
Click to collapse
Ok man i just use USB from back and its works i can bread again its solved
im instaling now again recovery and rom
thx bro
Kikurimatsu said:
Ok man i just use USB from back and its works i can bread again its solved
im instaling now again recovery and rom
thx bro
Click to expand...
Click to collapse
Very good !!! :highfive:
Can you add 'SOLVED' to the thread title ...... :good:
Thx Josh
is there any one that can help me out with this i have a moto g XT1039 and i havent a clue what im doing anymore, im stuck in bootloader and have the error hab check failed for boot and hab check failed for recovery when i try recover the phone. i need someone who can help me with a simple step by step guide please someone help every other post confuses me. fixed got it back up and running
lorfo123 said:
is there any one that can help me out with this i have a moto g XT1039 and i havent a clue what im doing anymore, im stuck in bootloader and have the error hab check failed for boot and hab check failed for recovery when i try recover the phone. i need someone who can help me with a simple step by step guide please someone help every other post confuses me. fixed got it back up and running
Click to expand...
Click to collapse
same problem, they said you should find the driver for ADb but my adb looks ok, i just cannot find it. i am using windows 10 maybe thats the issue ?
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
this kind of error appears while switching the phone on.. i tried to flash the stock rom through adb by commands.. even that failed.. everything i've tried and almost everything failed..
if anyone has faced same issues please do comment below the solutions! thank you.
Awez 0494 said:
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
this kind of error appears while switching the phone on.. i tried to flash the stock rom through adb by commands.. even that failed.. everything i've tried and almost everything failed..
if anyone has faced same issues please do comment below the solutions! thank you.
Click to expand...
Click to collapse
Flash the latest full stock, start with gpt and then motoimg.. Manually by fastboot flash
Sent from my XT1058 using XDA-Developers mobile app
Hello friends... I'm stuck in exact situation as OPwas. But I'm new to Moto x. Can some please explain in details.. Step by step procedure to bring phone back to life.. And link to files required.. Thanks a lot for your help guys. Also.. Phone bootloader is still locked and obviously not rooted.
hello guys I have a serious problem with my honor view 10 I unlocked the bootloader and installed twrp I tried to install the lineage rom and now my smartphone does not start anymore ... by mistake I flash the file sysyem.img wrong .. Can you help me restore my honor? please help me
help please!!!!!
If you are able to get into TWRP then you are fine. Go download another ROM, go into TWRP and mount usb so that you can transfer files from your computer. Transfer the ROM and reflash. Typically restarting the phone is volume down + power. Once it's restarted, hold volume up + power, that should get you into recovery (on most devices)
voldo04 said:
help please!!!!!
Click to expand...
Click to collapse
unbrick funkyhuawei
hello guys thanks for the answers ... but from the twrp I do not install any other rom because it gives me error .... while funkyhuawei how it works? Is there a guide that I can follow? thank you so much
voldo04 said:
hello guys thanks for the answers ... but from the twrp I do not install any other rom because it gives me error .... while funkyhuawei how it works? Is there a guide that I can follow? thank you so much
Click to expand...
Click to collapse
Flash stock system.img and recovery ramdisk, make factory reset with stock recovery and you're good to go.
hello thanks for the answer I tried to flash system and recovery but it gives me an erroe while writing .... FAILED (remote: Command not allowed) why? my bootloader is unlocked and my FRP blocked ... can this be the problem?
voldo04 said:
hello thanks for the answer I tried to flash system and recovery but it gives me an erroe while writing .... FAILED (remote: Command not allowed) why? my bootloader is unlocked and my FRP blocked ... can this be the problem?
Click to expand...
Click to collapse
Yeah you need FRP to be unlocked..
I managed to isolate the lineage rom ... now I wanted to see how I can get to the firmware stock ... thanks a lot to everyone